3110c cannot turn on (white flashes)

I click power button --> screen flashes a bright white several times --> and it turns off.
Description:
My Nokia 3110c ran out of battery, so I charged it.
While connected do AC power, I received some SMS, and when I was reading them, my mobile suddenly turned off.
I tried to turn it on again, but it showed a flashing white screen, 2 or 3 times, and then turns off.
Because I can't turn it on, I can't even backup all my sms, agenda, phone numbers usin Nokia Suite!
What do I do?

Bad luck.. Problem with ROM. The phone lost its firmware. It needs to be re-flashed.
Visit a Nokia Care center.

Similar Messages

  • My iPad keeps flashing the white apple and I cannot turn it off

    I downloaded iOS 7, 6 days ago, I was closing an app when the screen froze and now I just get the flashing white apple, and I cannot turn it off.

    Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808

  • My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

    I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
    I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
    What is wrong and what should I do?

    Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
    The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
    Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

  • I Charged my phone with an iPad charger in Indonesia.  The face of the phone is blank white.  I cannot turn the phone on or off.  What should I do?

    I charged my iPhone with an iPad charger in Bali, indonesia with an adapter.  The phone's screen is now blank white.  I cannot turn the phone off or get anything to happen.  What can I do?

    Try resetting it: Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

  • White glowing screen and I cannot turn off and or reset.  Just glows white

    white glowing screen and I cannot turn off and or reset.  Just glows.

    Try the remaining actions of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • 4S screen & apple logo flashing, cannot turn off phone to restart

    4S apple logo and entire screen flashing
    cannot turn phone off holding home and lock button
    sometimes a horizontal line appears across the screen as well
    (this happened as i tried to open an email link to linkedin)
    please advise

    plug the phone into laptop or pc with iTunes open, Hold home and top power button, until the logo vanishes, then let go of the power button keeping hold of the home button at the bottom, it will then ask to connect to iTunes, as u have it open an attached to the computer u can click the pop up an restore the phone!!

  • Black screen with white flashing line on startup

    ~computer info~
    Mac OS X Version 10.6.7
    2.66 GHz Intel Core 2 Duo
    4GB 1067 MHz DDR3
    24 in. Montior
    Startup disk: Macintosh HD
    ~Partition info~
    FAT32 Windows XP
    ~issue~
    Hello; I've recently encountered a problem with bootcamp that I can't find a solution to... Every time I start up the computer in boot camp, all I get is that black screen with the white flashing line. It comes up, goes to a plain black screen, then quickly comes up again. It never stops, either. I've let it run, and it won't finish.
    I've had the partition for MONTHS now, and nothing like this has happened. I've had it since I upgraded to Snow Leopard awhile back, and needed to re-partition the drive. I literally had been using it the day before it happened, and the only thing that happened was that I got that "Windows Security 2011" malware, but I got rid of it fully (As I've gotten it 3 times this month). The other two times I got it, it didn't do anything. I fixed it, and went on with life. But is it possible that it broke something in the partitions inner files this time?
    I ran disk utility, and it said the partition was broken. After verifying it and confirming this, I did "Repair Drive", as it allowed me to. It finished with no errors and said it completed, so I tried to go back into the partition, but it gave me the same results.
    To be honest, most of my stuff is on my External Harddrive, so re-doing the partition is only going to be time used to me. But I still DO have things on there, and it'd be a pain to transfer them back and forth between the Mac and Windows partitions... I'd really like to know if there's anyway to fix this, or if it's just going to fall back to me re-partitioning the drive...
    Thanks for the help in advance.

    That blinking line is a "cursor."  It's only supposed to show for a second or two as your iMac switches to and then starts Windows.  But as you indicate here, it's not getting past the cursor..
    Disk Utility can repair FAT volumes, but it cannot correct issues caused by corrupted items which, if the volume was repaired, there may be some.
    Since we are dealing with a Windows boot partition, it's entirely possible that the repairs inadvertently corrupted the data Windows needs to start and run.  It's also posible that Mac OS, in fixing the Boot Camp volume, overwrote the existing boot record in the Windows partition with a generic, though non-bootable version.
    Windows' own CHKDSK should have been used to make the repairs rather than the OS X Disk Utility, which would have avoided this worst-case scenario in data recovery.  CHKDSK has a special version of itself on the Windows disc, which may be accesed by using the Windiws Recovery Consile upon pressing R during the "Welcome to Setup" screen.
    Though it appears ftom my position here that you will need to reinstall XP, it may yet be possible to recover data that hasn't been copied to the external HDD.  For this task, I'd like to recommend that you start up in Mac OS for the time being, and pull any new or changed items from the Boot Camp volume except for installed software; the latter are nearly impossible to transport with reasonable accuracy, and should instead be reinstalled.
    Once you have what you need, format your Boot Camp volume and reinstall Windows, this time selecting NTFS as your filesystem.  NTFS is the preferred option for Windows in general, thiaks to its innate file access controls as well as the ability to compress or encrypt data "on the fly."  NTFS can be read by Mac OS X, but not written from it, thus NTFS volumes cannot be altered except by Windows itself..  But it is also a requirement if you plan to upgrade your unit using Windows 7 in future.
    Nate

  • Oracle forms display bright white flash when transitioning between forms.

    We recently migrated an application from Oracle Application Server to WebLogic and we are noticing that in the WebLogic environment while transitioning between forms there is a quick bright white flash that has caused several complaints. We are not sure if this is related to a performance issue which may be preventing the form from painting quick enough or if there is a configuration problem somewhere. Has anyone else seen this behavior?
    We are running WebLogic Server Version 10.3, Fusion Middleware 11gR1, and Oracle DB 11.2

    Unfortunately we don't have any errors to work off of. The application works fine, it's just that their is a very short delay when transitioning from one form to another and during that transition the whole form turns bright white which has caused users to complain that it could cause an epileptic seizure. I assumed maybe there was some performance tuning/caching that could be done to make it so it loaded quicker. Our DBA team recieved a response from Oracle support stating that although the forms themselves are relatively unchanged, due to the underlying software changes in 11g we are to expect some differences compared to previous versions. We have since set background in formsweb.cfg to use a light grey image which seems to be more acceptable for our users.
    Edited by: user4597705 on Oct 12, 2012 1:18 PM

  • HT4060 ipad does not seem to be charge.  has been plugged in for about 5 hours and low battery photo remains...cannot turn on or off... only low battery photo and apple symbol or blank page appear

    ipad does not seem to be charging.  Has been plugged in for about 5 hours and low battery icon remains same...alternates with apple symbol or blank page.  cannot turn ipad on or off

    The iPod Touch kept trying to reboot yesterday but would only show the Apple logo screen then shut off - it finally drained the battery overnight I am guessing. Connected to USB the battery charging icon flashes.
    Took it back to Best Buy, but they wouldn't touch it or replace it since it's under warranty.
    To any potential buyers - beware. My best advice is to look somewhere besides Apple. Every Mac user I know has had to return a Mac, laptop, etc. Really poor quality control, and the retailers agree (Geek Squad told me they have had the same experience with Apple products).

  • W520 cannot turn on after hibernation (closing the lid)

    When I close my W520's lid and it goes into hibernation, it sometimes cannot turn on again. 
    The power button will be lit and when i press it, the thinklight flashes but the computer will not boot. It will repeat this process continously for a few times. 
    Also, I notice that the first two LED indicators on the cover will be lit. 
    Is anyone able to advice me on this? Should I send it for servicing? 

    Are you sure it goes into hibernation? By default it goes to sleep when you close the lid.

  • My 80gb ipod isn't working.... black screen with white flashes

    Got the 80 GB Ipod (with video) X-mas '06, haven't had many problems with it (except for the occasional freezing, where the standard "reset" technique has fixed it).
    Was using it last night, the battery meter was pretty low. Turned it off and went to bed. Woke up, tried using it today, and it wouldnt turn on.
    The screen is black, but every 5-10 seconds, there's a quick white flash. It has been doing this all day.
    I've tried resetting it, charging it into my Windows USB port... nothing. The computer doesn't even seem to recognize it, and ITunes doesnt start when I plug it into the USB like it normally does.
    The black screen/white flashing continues even when it's plugged into the USB.
    Any ideas on what is going on? What should I do?
    Thanks in advance.

    Have you been through these?
    The Five Rs.
    If nothing helps, you can arrange online service here.
    Service request.
    Or you could take it into an Apple store and have them take a look at your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • Cinema 4D to AE problem - random white flashes

    Hi guys, just having a really random problem.
    I've exported a cinema 4d file to AE so I can put the finishing touches on in ae.
    When I scrub through the timeline in AE everything looks perfect.
    However when I render it out there's these random white flashes that occur? I have no idea what's causing this.
    I've tried placing black solids in the back, rendering out in different formats, nothing works.
    When I export from C4D - QuickTime movie with the Animation codec is selected and the Alpha Channel, Straight Alpha and 24 bit dithering are selected by default (could these be causing it?). I dont want to experiment because it takes about 6 hours to render that simple animation...(wtf??)
    Also in relation to the Composition project file, relative and include 3d data are selected along with After Effects as the target application.
    here's an example of what's going on:
    http://vimeo.com/15378812
    I'm running:
    i7 950 3.06ghz
    24GB 1333mhz ram
    Nvidia Quadro FX 1700
    Raid 10 setup

    I dont want to experiment because it takes about 6 hours to render that simple animation...(wtf??)
    And your point? 3D rendering is an intense process, even more so when as per your example you use reflections and all that. I don't see a problem here, you are just inexperienced and lack a frame of reference from using more 3D programs, obviously.
    When I export from C4D - QuickTime movie with the Animation codec is selected and the Alpha Channel, Straight Alpha and 24 bit dithering are selected by default (could these be causing it?).
    Yes, it's stupid. Not for the settings but for the simple fact that when the machine were to crash halfway inbetween, you'd lose all your work because the clip would end up being damaged. likewise, you cannot interrupt and continue at a later point. It's simply a bad workflow. always use image sequences! That aside, it may still be a compression glitch, but this is between you and the effed up little app that C4D is these days...
    Mylenium

  • Black/white flash at end of iDVD transition

    Why am I getting a black (or white) flash consistently after a transition from iDVD menu to movie?

    One thought. Take a look at your timeline in your original imovie project. If your audio comes first without any video attached to it, that can cause the flash. If that's not the case, try shaving one or two frames off your video, then reimport your project into idvd. That might take care of it. Good luck. And let us know how it turns out.

  • Cannot turn on Droid HD Razr

    My phone completely died, a quick message that mentioned "Android Failed" popped up and then the SD card icon eliminated. I saw that I had 52% battery and only 2 apps up, Kindle and Yahoo.  Then the message pops up again and poof it shut down.  No warm reboot or anything it is cold dead. I have never had this happen and the phone has worked great for this past year up until now. I tried to check the card and it looks fine, no cracks the cradle is tight.  The power button does nothing. 
    Any of the troubleshooting doesn't account for the fact I cannot turn it on at all.  Even if I try to access it with my PC, it's not able to see anything.
    At the time I was reading on my lunch break and there was no physical trauma to the phone.

    I find this amazing that the same thing is happening simultaneously to Droid HD Razr owners. Hmph.
    My phone has been acting weirdly since the update - apps turning off and interrupting calls, battery loss and of course the heat. Now it just turned off yesterday - after a full charge,mind you - and would not come back on. I finally pressed the power button and volume and it started the familiar 'DROID' sequence, only to get stuck on the 'red eye'. Nice.
    Useless for a day now. I keep retrying and finally get the screen that says:
    AP Fastboot Flash Mode
    Device is locked, Status Code: 0
    Battery OK
    Transfer Mode: USB Connected
    Fastboot Reason: Key pressed
    But of course, I cannot download anything from the phone to the PC. Useless.
    So now what? Day 2 without phone. Not happy.

  • Ipone 3g is frozen cannot turn off

    my iphone 3g is frozen in settings. cannot turn off.

    Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.

Maybe you are looking for