32-bit mode and only one Instrument?!?!

I have my Logic Studio/Pro 9.1.3 set to run in 64-bit mode... But unfortunately I can only view one Virtual Instrument at a time. Is there anyway to view multiple instrument interfaces or is this just a limitation of running in 64-bit mode.
Also, if this is a limitation of 64-bit mode will they eventually add the ability to open more than one V.I. at a time? I like to jump between virtual instruments and the 32-bit VIs (Which most of mine are) only run one at a time.

montreaux wrote:
I have my Logic Studio/Pro 9.1.3 set to run in 64-bit mode... But unfortunately I can only view one Virtual Instrument at a time. Is there anyway to view multiple instrument interfaces or is this just a limitation of running in 64-bit mode.
Strictly speaking it is a limitation of using 32-bit plugins in 64 bit mode. The plugins don't run in Logic anymore, so you effectively switch to a different program (32b AU bridge) when opening the interface of 32 bit plugins.
It is just a waiting game until most/all 3rd party plugs and instruments are 64 bit, or until the 32bAUbridge has improved to indeed show multiple GUI's at a time.
Also, if this is a limitation of 64-bit mode will they eventually add the ability to open more than one V.I. at a time? I like to jump between virtual instruments and the 32-bit VIs (Which most of mine are) only run one at a time.
No idea what the plans are of the Logic developers. I hope they'll improve it, I expect they'll improve it, but I don't know anything for sure in that respect.

Similar Messages

64 bit mode and some questions

Happy New Year all,
Just once I'd like to start up in 64 bit mode. I've tried to do it several times without success and I don't know what the problem is. Hardware, software?
I'm running two 10.6.2 systems, one on 1 SSD 3 drive Raid 0 array, one on another. Both internal and I used SoftRaid to set both up.
Each time I try, I get the gray screen with Apple logo and the spinning wheel. After a time I get the circle with a bar through it and have to use the power button to shut down. When I tried it last time on one array, the above happened and both arrays unmounted. I could only get my disks mounted by booting from a clone and both systems, the 32 and 64 bit, did not show in the Startup Disk Pref Pane. Both systems showed up when I pressed the Option key at start up but I couldn't start up from either.
I should have remembered to press the 3 and 2 keys to get access to those drives again but a PRAM reset got my 32 bit system back again. From there with a little research I saw mention of the 3 and 2 keys again, tried it on the 64 bit system and got it to boot in 32 bit.
Long story short though I don't know why I can't at least boot into 64 bit mode. Could it have something to do with the SSDs? Could it have something to do with SoftRaid? Why would both arrays dismount when only one should be affected?
Is it a common issue for many 64 bit compatible Macs to not be able to start up in 64 bit mode for any one of a variety of reasons? I should say that neither of my systems can start up that way.
Thanks, any insight is appreciated.

Talk to Mark and look for any notes on SoftRAID and 64-bit mode;
Try installing Mac OS only to one of your SSDs (break the array).
Just a nice small clean Apple ONLY OS.
"6" + "4" ought to get you into 64-bit kernal mode.
Any PCIe card/driver you have to be concerned with?
==================
SoftRAID 3.6.8 is compatible with Snow Leopard in 32 bit mode. You will be asked to replace the newer version of the SoftRAID driver that is bundled with Snow Leopard, with the 3.6.8 driver.
+A newer, *64 bit version of the SoftRAID driver* is included with Snow Leopard for users in 64 bit mode,+ which will allow you to keep existing volumes and access data from the 64 bit version of Snow Leopard. Currently, only the X-Serve boots into 64 bit mode by default. *SoftRAID 3.6.8 will not work in 64 bit mode.*
SoftRAID 4.0 is coming soon!
SoftRAID version 4 will be a full 64 bit Snow Leopard compatible version. We don't have a firm shipping date, but will try to have a "customer beta" in a few weeks for those who want to beta test SoftRAID 4.0.
The SoftRAID 4.0 official release will probably be in October. Upgrades will cost $69, except for 2009 purchasers, who will get it free.
http://www.softraid.com/

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

Itunes is running in 64-bit mode and will not let me switch to 32- bit mode

I guess 64-bit mode requires MAC OS X 10.7 and I only have 10.6.8 so somehow i need to switch back to 32-bit mode and the instructions it gives me to do so don't make any sense. help!

At Mike Johnson12's suggestion I posted my problem separately at https://discussions.apple.com/message/15801854#15801854 . The only response I have received there so far is from another person who has experienced the same problem you & I have. That makes at least 3 of us. Please feel free to hijack my post there if you think it might help!

HT2404 I have a 2011 macbook pro 13". I am trying download software for the clear network and it won't let me saying I'm running in a 64 bit mode and I need to change my computer to a 32 bit mode before downloading. Is that possible and how do I do it?

I am trying to download software for the clear internet network. It is telling me that I am running in a 64 bit mode and
need to be in a 32 bit mode to run their software....can I and how do I change it to a 32 bit mode?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

How do I make one (and only one) device use my Apple ID and iCloud account?

How do I make one (and only one) device use my Apple ID and iCloud account? I currently have an iPad mini, iPhone 5, and MacBook pro attached to my apple accounts, but I want only my iPhone 5 to be assosiated with either one. Whenever I use any of the three devices, I get a notification on the other two telling me that these devices are now using these accounts from these services, etc. and I want these notifications to stop, along with the devices using to them. How do I do this? I completely reset the iPad mini so I don't know how I'm still getting notifications from it, and I deleted and signed of of all of my accounts everywhere I could find on my Mac. So, to restate exactly what I want to do, I want ONLY my iPhone 5 to use ANY of my Apple/iCloud accounts and ONLY it can receive emails, iMessages, and FaceTime calls. Thanks!

If you want to disconect your Mac from iCloud, go to System Preferences>iCloud and click Sign Out. If you only want to stop using iCloud email, just uncheck Mail. To stop iMessage, open the Messages app, go to Messages>Preferences, click the Accounts tab, click your iCoud ID on the left-hand side, then to the right click Sign Out. To stop FaceTime, open the FaceTime app, then click "Apple ID" then click Sign Out.
On your iPad, go to Settings>iCloud and tap Delete Account (or if you only want to stop using iCloud email, turn Mail off). For FaceTime, go to Settings>FaceTime, tap the ID and sign out. For iMessage, go to Settings>Messages>Send & Receive, tap the ID and sign out.

How can I have multiple accounts and only one library

How can I have multiple accounts and only one library that all the purchased items feed into?

ask your wireless provider.

I purchased a bundle of 5 movies and only one is showing up in my library. how do I access my other four (as well as other movies I have purchased but can't play on my computer?

I purchased a bundle of 5 movies thru itunes and only one is on my library. how do I get the other 4?
(I am not great with computers)

Which OS version are you on?
Which Mac - model/year?
Did you download all 5 movies (depending on your connection, that could have taken quite some time)? Have you checked to see if they're available for download?

HT5622 Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

angiefromaustin wrote:
Yes I know the password for Apple ID.
Then there should be no issue for you.
angiefromaustin wrote:
I do not know the password to get onto the 3G phone to make changes or update apps etc.
Then there is more than one Apple ID involved.... Or a Restrictions Passcode has been set.
angiefromaustin wrote:
2 phones and only one Apple ID
Then what do you mean by this ?

We have two iphones and only one ipad. We want to be able to use "find my iphone" for both phones, which have separate apple ids. How do we get our ipad to accept this?

We have two iphones and only one ipad - no mac. We want to be able to use "find my iphone" for both phones. How do we get the ipad to accept two iphone accounts? icloud is enabled on all three devices.

Also, be aware of the following:
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

I get a dialog box with a copy of firefox is open and only one copy of firefox can be open at one time.

I get a dialog box with the following: "a copy of firefox is open and only one copy of firefox can be opened at one time."
I do not see where firefox is open.
How do get back into firefox so that i can read the links that are in my emails?
Thank you.

Sometimes when FF is closing, not all of it shuts down properly.
On Windows, start the '''Task Manager''' (Other systems may have
different names and / or commands). Select '''Processes'''.
Look down the list for Firefox. Right click and select '''End Task'''.
If this problem keeps coming up, ask for more help.

Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.

Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.
I get above message when I click on the firefox icon.

This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. Any ideas what is causing this?

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?

No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.

ERROR ITMS-9000: "META-INF/container.xml must contain one and only one root file reference."

Hi all,
After correcting a table-of-contents error in my .epub file, I am unable to upload it via iTunes Producer. It lists this error message:
ERROR ITMS-9000: "META-INF/container.xml in 9780615431727.epub must contain one and only one root file reference." at Book (MZItmspBookPackage)
The file has been verified and only has one root file reference in the container.xml file.
Has anyone been able to find a solution to this problem?
Thanks!

Hello Forum Users…
For those of you who have run into the upload roadblock, getting an error message similar to this:
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/slm/Desktop/MUSIC to PICTURE for IBOOK/2012 MTP for iTUNES Bookstore/9780615600918.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780615600918.itmsp
                    ERROR ITMS-9000: "OPS/ibooks.ncx(5): 'p50': fragment identifier is not defined in 'OPS/content9.xhtml'" at Book (MZItmspBookPackage)
Following is a "specific" fix, but the idea of the fix will help you with your specifics too.
I tried for 17 days to upload a book that looked and worked perfectly in iPAD via Preview.
After many discussions with Apple, who to their credit stayed with me over 2-3 days, I decided to play a hunch.
I went into a duplicated copy of the book and on every page, (because the error message was not telling the whole story), looked for what InDesign would call "Overset Text."
Now... the "flaw" in iBOOK Author (hint) is that it won't advise you of this "overset text" as does InDesign.
And to compound the matter, the exported ePUB document WORKS in iPAD Preview.
See Screenshots from InDesign:
Okay... Couldn't add it but it is a Warning Box that says there is overset text. (Characters which exceed the text box.)
Nevertheless, I played this hunch, and sure enough found a few boxes with the + in them. In other words I clicked on EVERY text holder and every text block in the entire document.
Where I found + signs, I simply deleted some carriage returns from the iBOOK file... (please note… carriage returns and literally empty spaces that caused the overset text) and then erased all previous copies of the Music to Picture Book on my hard drive, iTUNES and iPAD.
The result? A "text-book" upload with no snags! As my Son would say… "Victory!"
So, first make sure that you are using only PNGs, Jpegs and Movie files to iBook Specs. Then... make sure there are no overset text boxes, which you must do manually.
Enjoy & Godspeed!
Steve
Stephen Melillo, Composer
STORMWORKS®
209 Spinnaker Run
Smithfield, VA 23430-5623
USA
v/f 757-356-1928
stormworld.com
“History is a vast early warning system.” Norman Cousins, editor and author (1915-1990)
"This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." Leonard Bernstein
“If you have a chance to help someone, and you don’t, you are wasting your time on this earth.” Roberto Clemente

32-bit mode and only one Instrument?!?!

Similar Messages

Maybe you are looking for