32 bit problem on a 64 bit operating system

I have iTunes, reasonably current, on a Windows XP-Home laptop. I just bought a new desktop with Windows 7 Ultimate.
I purhcased PC Mover from Dell to migrate my stuff. Foolishly, I migrated the iTunes that was on my laptop.
After the migration, I tried to run iTunes from my new computer. It told me to go to Control Panel and Repair. I did, this failed. It told me to download the 64-bit version.
No problem. I downloaded v9.2. It was actually the correct version. It called the file itunes64setup.exe, I believe.
When it came time to install, it said this installer was meant for 32 bit OS, please download the 64. It offered a location of www.apple.com/support/downloads/bonjourforwindows.html. I downloaded it, but this looks like printerware and didn't help.
I decided to uninstall everything and start over. When I went to uninstall iTunes, I got the exact same error about it being meant for 32 bit OS.
Now, I am stuck in ****, unable to install or uninstall because I cannot convince it to use a 64 bit installer.
1. Sorry for the length of the post.
2. Thoughts?

Follow all the steps in the article to which I linked, including the article it links to. Installer Cleanup will not remove everything; it's just part of the process. Installer Cleanup can be downloaded here:
http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
If that's not where you downloaded from, you may have gotten something different.
Regards.

Similar Messages

  • HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

    I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
    Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
    Is it possible to use the AUTO DUPLEX  feature of  the printer with Windows 7   64 bit  operating system.
    All replies welcomed!   Aaron in Calif.

    Hi Aaron,
    Make sure the Automatic Duplexing option is enabled:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
    Now Automatic Duplexing should become available.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Whether postgresql-8.2-506.jdbc4 works in a 64 bit operating system?

    Whether **postgresql-8.2-506.jdbc4** works in a 64 bit operating system?
    Especially I would like to know whether it works in windows server 2008 64 bit operating system.

    masijade. wrote:
    :sigh:
    IOW, Go to a PostGreSQL site and ask there!
    The Driver is produced by them, they should know. I don't believe it would be a problem, but all you can do is try it.Agreed.
    The postgresql JDBC driver is a type 4 driver and therefor a pure Java implementation without JNI dependencies. That should work without problems on a 64 bit system.

  • INdesign and 64 Bit Operating Systems

    Been having problems with my INdesign, and the tech people on the support line said it is because I have Vista 64 bit operating system. This sounds very strange to me, as INdesign is the industry standard, and 64 bit operating systems are the norm. Does any one else have experience trying to run INdesign on a 64 bit system?

    Bob's right; I'd suggest ignoring the 64-bit issue and just getting familiar with coming to the forums for assistance. I've worked phone tech-support jobs before; phone support reps are judged by how fast they can get you off the phone, and if you start the call with "Hey, I'm running ID on a 64-bit system" then they can get you off the phone immediately, so you just gave their call-time metrics an easy statistical boost.
    1) So, yeah, the baseline grid will cause stuff to snap to it if you have that setting turned on in the "Grids & Guides" section of the View menu.
    2) "Manual overrides" means that you can format text manually by clicking on the Font menu, and that will cause your formatting to diverge from what is defined in the style. Take a look at the style name; does it have a little plus next to it? That means that the text you've selected diverges from the style. Clear the overrides to return the text to the settings in the paragraph style. You can do this with an alt-click on the style name, or by clicking on the options pulldown in the Paragraph Styles panel and choosing "Clear Overrides." I do it so often that I have a keyboard shortcut set up to do it (in Edit -> Keyboard Shortcuts).

  • Excelrepor​tdemo project link error with CVI2010 on windows 7, 64-bit operating system

    I am trying to run the excelreportdemo project in CVI2010 on windows 7, 64-bit operating system. I have the Excel2013 installed as well. I have chosen the build configuration as release or debug for 32 bit system so to be compatible for the test platform for production.
    However, I get 12 Project link errors as following:
    Undefined symbol '_ExcelRpt_RangeBorder@24' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WriteDataFromTableControl@16' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_SetCellValue' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_SetCellRangeAttribute' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ChartAddtoWorksheet@40' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ChartWizard@52' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_SetChartAttribute' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WorkbookNew@8' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ApplicationNew@8' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_ApplicationQuit@4' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WorkbookClose@8' referenced in "excelreportdemo.c".
    Undefined symbol '_ExcelRpt_WorksheetNew@12' referenced in "excelreportdemo.c".
    I have found a previous dicussion back in 2007. Unfortunately it did not help for the same problem on my new machine and CVI2010. Could anyone give me help on this/
    Thanks!
    Yuwei
    Solved!
    Go to Solution.

    The previous discussion link is pasted below:
    http://forums.ni.com/t5/LabWindows-CVI/Problems-adding-the-activex-instrument-e​xperiencing-undefined/m-p/580608/highlight/true#M3​1390
    It did not solve my problem, but may spark your idea of helping me.
    Thanks a lot!
    Yuwei

  • I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

    I have a PC running windows 7, 64 bit operating system which we upgraded from windows XP 32 bit. I can't download my photoshop elements which I bought as a download onto this 64 bit because it says it's for a 32 bit system

    Hi claire.winteringham,
    If you have a 64 bit machine then there shouldn't be any problem while installing any 32-bit software.
    Try to download it with the below mentioned link :
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
    Thanks,
    Atul saini

  • Driver HP LaserJet 5 for Windows 7 64 bits operating system

    Hi, I am searching for a driver HP LaserJet 5 for Windows 7 64 bits operating system or a work around

    Hi,
    A driver for your product should be included within the Windows 7 OS or alternatively available from the Windows Update servers.
    Please follow the document below in order to configure your printer:
    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?&objectID=c02536257
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Flash Player for Windows 32-bit operating system

    I feel so stupid ....
    and I am also exhausted after trying to find a solution (which is not too technical for me ... ) to my problem:
    I use a Dell portable PC System 1555 with System 7  64-bit operation system. I need of many reasons Flash Player (my grandchild tried to play games on internet and only get a "red cross" upper left when pushing the Play-button...) and I understand that Flash Player s is not finished yet from Adobe coming to 64-bit systems.
    Now I also tried to install a streaming music program but got message back that I need to install Adobe Flash Player...
    I have not been able to find an "easy" way to get my PC working with the 32- bit Flash Player as I understand shall be one solution to my problems.
    I am a retired person not too clever technically, and am just wondering if it is possible to get an relatively easy instruction how to solve my problem.
    By phone did Dell Norway give me the advice to contact the Adobe User Forum as Dell could not help me.
    Thanking you, my advisor, much in advance !

    Thank you, all my good friends here at the forum, you have been very helpful.
    I have read all the good advices and threads and have tried many things and the problem now seemed solved. The "trick" was probably to deactivate the ie64 bit browser and activate the ie32 bit.
    Now I can again enjoy to open programs which need the Flash Player and I am able to enjoy a program providing streaming music to my portable Pc.
    Again, thank you all!

  • Can run .exe but cannot use .exe file with 64 bit operating system

    I built an application in labview (32 bit) in xp. The exe file generated from the labview 2009 is able to function well in windows vista (32 bit). For this i installed run time engine and since my application requires vision tools so i also installed the vision run time engine 2009. The application reads values of a device (from microcontroller) from the virtual com port (through USB).
    Now the problem is the .exe cannot response in Windows 7 (64 bit). For this i installed Run Time engine 2009 (for 32 bit) and also vision run time engine. The exe runs but does not read any value from the COM port and does not response any thing.
    This is somehow related to 64 bit operating system. 
    Further to mention, the control input for 'VISA resource name' input of 'Visa Configure Serial Port' block generally detects the COM Port where the device is connected (e.g. COM1, COM2 etc)  and used to display the choices (on drop down menu) but with 64 bit operating system this is not happening.
    What could be the possible problem? I would be happy to know if someone has come across this problem or if someone can help me to solve this problem.
    Simply i would like to run an .exe application build in 32 bit to run in an operating system of 64 bit. This application has VISA and Vision motion tools.

    NI VISA is a software abstraction layer for different physical interfaces (e.g. RS232).
    I understood that your application is working with this in order to select and communicate with COM interfaces.
    MAX (Measurement & Automation Explorer) is the tool to configure and test NI drivers, in this case VISA.
    So if no COM shows up in MAX, you have a malfunction (or missing) installation of VISA.
    Norbert 
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to fix "A 32-bit agent is installed on 64-bit operating system" alerts

    Hi
    We have installed SCOM 2007 R2 CU1 in our environment (by properly following installation sequence given on the CU1 web page). After manually installing agent update of CU1 on 64 bit servers, we are getting alerts "A 32-bit agent is installed on 64-bit
    operating system" and the status of these 64-bit servers remains in Warning state. We have manually uninstalled and reinstalled 64-bit agent as well as 64-bit CU1 agent update but still the status is in Warning state. We can not completely uninstall cluster
    node agent, remove it from the console and reinstall agent from scratch because SCOM R2 is not allowing to do clean uninstall and reinstall of agent on cluster nodes.
    If anyone faces similar problem and have fixed it then please let me know the solution so i can also fix the issue.
    Thank you
    HRP
    Thanks & regards, H R Parikh

    This new(er) monitor is set to generate when the registry key "HKLM\SOFTWARE\Wow6432Node\Microsoft\Microsoft
    Operations Manager\3.0\Setup" is found on a 64-bit Windows server. We have several alerts like this as well, but found it had little to do with the CU1 patch and
    more to do with rolling out the updated Operations Manager management pack (v6.1.7599.0) at around the same time as well as the server having had a 32-bit agent previously installed at one point or another. We are looking into simply removing the 32-bit
    key, but have not done so just yet as we need to test this theory on a dev server first. Of course, to be safe, we could always uninstall the agent and patch, delete the keys manually, and then reinstall.
    Hope that helps.
    Larry

  • Trouble installing vz access manager on a gateway nv5207 windows 7 64-bit operating system

    I am having trouble installing vz access manager on a gateway nv5207 windows 7 64-bit operating system.  It will load the windows generic broadband drivers and the verizon wireless fimware updates and then it will do a search for previous versions of vz manager and it will just stay stuck on that part of the installation.  I had cricket wireless broadband on here and uninstalled it and installed vz manager and it worked for a minuet, but it start acting up again.  So from that point I uninstalled everything and tried to reinstall everything with the same problem.. Even after I cleaned up the registry....thanks in advance for anyone that can help me out.

    I am having trouble installing vz access manager on a gateway nv5207 windows 7 64-bit operating system.  It will load the windows generic broadband drivers and the verizon wireless fimware updates and then it will do a search for previous versions of vz manager and it will just stay stuck on that part of the installation.  I had cricket wireless broadband on here and uninstalled it and installed vz manager and it worked for a minuet, but it start acting up again.  So from that point I uninstalled everything and tried to reinstall everything with the same problem.. Even after I cleaned up the registry....thanks in advance for anyone that can help me out.

  • Compatiblity of iPod and iPhone 3gs with Windows 7 64 bit operating system?

    Will the ipod classic anf the iPhone 3gs have software that will work with Windows 7 64 bit operating system?

    Hi Aaron,
    Make sure the Automatic Duplexing option is enabled:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
    Now Automatic Duplexing should become available.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I install after effects on 32 bit operating system?

    How can I install after effects on 32 bit operating system?
    I cant even find it in creative cloud.
    I want to make  a intro but it dossent allow me to even find/ istall it.
    I hope some one will help me by anwsering my question.
    Than you for time.

    If your system does not meet the minimum system requirements you have to go back to a version that does. Try the direct download links you'll find here.. CS5 comes bundled with CS4 for AE which is the last  version to run on a 32 bit system.

  • New iTunes still not working with 64 bit operating systems?

    When will iTunes support advanced 64 bit operating systems...
    Would seem that a next generation phone would work with the next generation of operating systems...

    iTunes does work with vista 64 bit. I can sync my iPod with it. It's the 'Apple Mobile Device Support' portion that is required by the iPhone that isn't working.

  • HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

    HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
    Please help, if any one knows any solution.

    Hi @Firoskhan,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Ram utilization with 64 bit operating system

    Attached is the current configuration of my 8.1 Pro PC & I have a question regarding RAM utilization with 32 bit programs running on this PC.
    It has been my understanding that the 32 bit OS (XP Pro), at best, would be able to only utilize 4GB of RAM memory.  
    I've recently built a PC for the specific task of running an application which is very CPU & output intensive. The application is a Windows based 32 bit application which analyzes and recovers data from NAND chips.  Input data comes from a 2.0 USB
    feed, is processed and is then written to a 2 disk raid array.
    Will the 64 bit operating system enable 32 bit applications to utilize more than 4GB of RAM memory?  Any suggestions on how to maximize the processing of 32 bit application on a 64 bit OS would be appreciated.
    Operating System
    Windows 8.1 Pro 64-bit
    CPU
    Intel Xeon E3 1275 v2 @ 3.50GHz
    35 °C
    Ivy Bridge 22nm Technology
    RAM
    16.0GB Dual-Channel DDR3 @ 657MHz (9-9-9-24)
    Motherboard
    Supermicro X9SAE (CPU)
    37 °C
    Graphics
    HP w2408 (1920x1200@59Hz)
    Intel HD Graphics (Super Micro Computer)
    Storage
    372GB Western Digital WDC WD4000AAKS-00TMA0 (SATA)
    30 °C
    465GB Western Digital WDC WD5000HHTZ-04N21V0 (SATA)
    28 °C
    465GB Western Digital WDC WD5001ABYS-01YNA0 (SATA)
    32 °C
    465GB Western Digital WDC WD5003ABYX-01WERA1 (SATA)
    31 °C
    Optical Drives
    PLEXTOR DVDR PX-891SAW
    TSSTcorp CDDVDW SH-224DB
    Audio
    High Definition Audio Device

    Hi,
    As far as I know, 32-bit application running on x64 Windows system had a limit of memory address space. The max usage of RAM is 4GB. I also make a test using testlimit:
    According to the screenshot, we can find that, 32-bit testlimit only can leak 4051MB memory, while 64bit testlimit can achieve to 5200 even more larger memory.
    For more information about this knowledge, you can refer to contents of chapter 9 in Windows Internal:
    http://live.sysinternals.com/WindowsInternals/WindowsInternals-Ch05.pdf
    Roger Lu
    TechNet Community Support

Maybe you are looking for