32 errors detected during ACT_700. in SRM Upgrade

Hi Experts
                   I am stuck in SRM Upgrade. I have got follwing error. They might be known for you. Please suggest me the solution. Your response will be highly appreciated.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7009.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7008.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7007.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI5.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI3.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7C.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7B.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7A.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT10.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT09.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT08.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT07.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1EEDO519X"Data Element" "Z_STORT" could not be activated*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70013.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI4.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621482 at 20080110153041*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
  *A tool used by tp produced errors*
*Process with ID 2621482 terminated with status 8*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621520 at 20080110154527*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
  *A tool used by tp produced errors*
*Process with ID 2621520 terminated with status 8*
*iedm3330dd:ed2adm>*
*iedm3330dd:ed2adm>*
Thakns& Regards
Jignesh

Hi Experts
                   I am stuck in SRM Upgrade. I have got follwing error. They might be known for you. Please suggest me the solution. Your response will be highly appreciated.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7009.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7008.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7007.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI5.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI3.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7C.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7B.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7A.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT10.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT09.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT08.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT07.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1EEDO519X"Data Element" "Z_STORT" could not be activated*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70013.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI4.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code           : "8"*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621482 at 20080110153041*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
  *A tool used by tp produced errors*
*Process with ID 2621482 terminated with status 8*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621520 at 20080110154527*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
  *A tool used by tp produced errors*
*Process with ID 2621520 terminated with status 8*
*iedm3330dd:ed2adm>*
*iedm3330dd:ed2adm>*
Thakns& Regards
Jignesh

Similar Messages

  • ODI-23049: Error Detected during Repository Installation

    Hi All
    I installed ODI 11.1.1.6.0 on W7(x64).
    http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
    (for all platforms)
    I created user odim
    on Oracle server : Personal Oracle 11g (11.2.0.1.0)
    (where I have ALL rights)
    grant DBA to ODIM with admin option;
    Trying to create Master repository from ODI Studio got :
    ODI-23049: Error Detected during Repository Installation
    :Error while updating Schema Version Registry Entry for ODI.
    Check if user odi has DBA permissions.
    Test connection on 1-st page
    jdbc:oracle:thin:@EVBYMINSD0799:1521:TRAF
    works OK.
    Any ideas welcome

    DBA User: The database administrator's username
    DBA Password: This user's password
    I use user ODIM (ODI) for both user and DBA
    ( tried SYS - but it fails with standart message : you should connect as SYSDBA - because there is no uch option in interface )
    I use user ODIM 2 times
    Is it correct ?

  • Error detected during paging operation

    My computer is freezing on a regular basis and I get the repeated Event ID: 51 message 'An error was detected on device \Device\Harddisk0\D during a paging operation.' in the system log.
    The hard drive is a new Maxtor DiamondMax 10 SATA.
    I've been to the Maxtor site and it says 'These errors are not caused by the external storage device. The error may be related to problems in either the USB / ATA / SCSI / 1394 controller sub system or another storage device.'
    Does this mean there is a fault with the motherboard?
    The motherboard is an K8T Neo2 Series (MS-6702E).

    Quote from: mcihael on 13-June-05, 03:50:14
    Hi,
    it may help if you'd disable USB legacy supprt in BIOS. I have had similar issues with my Firewire-HDD. The BIOS setting mentioned before fixed that apparently.
    Michael
    Thanks I will give that a try.
    I'm still getting the same problem.
    I have upgraded the PSU to a 450W and changed the memory configuration from dual-channel (using DIMM1 & DIMM3) to the ordinary configuration (using DIMM1 & DIMM2).
    Neither of these measures has worked.
    I am using two Crucial CT6464Z40B 512MB PC3200 memory modules that according to Crucial should be 100% compatible with the board.

  • Error TSV_TNEW_PAGE_ALLOC_FAILED during Enchancement Pack 4 upgrade

    Hi Everyone,
    I'm at upgrade stage MAIN_SHDRUN/ACT_UPG which has been stuck here for the past couple of days. Finally errored out with:
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-40401INEAIPPE.TRN
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1AETR012XProgram terminated (job: "RDDMASGL", no.: "19283900")
      Long text:
        Cause
          Program "&V#&", which was started in the background, was terminated
          abnormally.
        System Response
          The system created a job log for the terminated program.
        What to do
          Proceed as follows:
          Log onto the system in which the program was executed. The system is
          specified at the beginning of the transport log.
          Then call transaction SM37 to display the job log.
          Enter "&V#&" as job name and "DDIC" as user name.
          Restrict the starting date to the starting date specified in the
          transport log.
          For the other selection criteria, select only jobs with the status
          "cancelled". Then press <LS>Execute</>.
          A list of the jobs satisfying the selection criteria is displayed.
          You can display the log by pressing <LS>Job log</>.
          If the list contains several jobs, you can select the job with the ID "
          &V#&" with <LS>Display</> -> <LS>Job details</> or define further
          details for the selection criteria in the initial screen of transaction
          SM37.
          If the ABAP processor reports cancellation, double-clicking on the
          corresponding message in the job log branches to the display of the
          corresponding short dump.
    1AEPU320 See job log"RDDMASGL""19283900""TRN"
    1 ETP111 exit code           : "12"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60011INLSOFE.TRN
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1AETR012XProgram terminated (job: "RDDMASGL", no.: "19283900")
      Long text: see above
    1AEPU320 See job log"RDDMASGL""19283900""TRN"
    1 ETP111 exit code           : "12"
    I checked ST22 and it is giving me dump TSV_TNEW_PAGE_ALLOC_FAILED. I read in many places to increase the virtual memory which I have to 85829MB, I've increased abap/heap_area_dia to 9221225472 & abap/heap_area_nondia 9221225472 but I continue to get the same errors. I'm not sure how to proceed past this and I'm running very behind schedule to get this installation completed. Any suggestions? Any help would be greatly appreciated. Thank you!

    Hi
    Pl tune the parameters of SAP , Oracle and OS in phased manner. It will definetly solve your problem.
    Pl note that change the memory related parameters in stage-1
    Regards
    Vimal

  • "Burning finished.  Errors detected during burning".

    I have been trying to burn in iDVD 5 without luck. I keep getting the message in the subject line "Burning finished ..." after it has encoded all the media.
    the project seems to encode/compress the data, but then not physically burn the media.
    It was working fine until iDVD crashed on me one time -- since then, I have not been able to successfully burn.
    Any ideas? Many thanks in advance. I am using all the latest software.
    Long live the sunflower iMac G4, iBook G4   Mac OS X (10.4)  

    sometimes idvd errors occur because of a corrupted file. I had everything go smooth...video encoded good but then it froze up after trying to encode the audio...I went back into my project and deleted the "added" music [ wedding video] and tried music that I knew worked before....voila! It was corrupted music file[s]...I found that sometimes my clients will give me a CD with their music on it it and it will not work in idvd even though it worked fine in imovie!

  • Error Detected during Installtion

    Hi ,
    I have to create Master Repository using Oracle 11g database.
    I have entered all the DATABASE CONNECTION details and Test the connection like :
    Message was edited by: 952939

    Duplicate of post
    https://forums.oracle.com/thread/2548493

  • "Could not commit transaction: Error -1 detected during transaction"

    hi guys,
    im getting this error "Could not commit transaction: Error -1 detected during transaction" when trying to create standard document/s. i am now using B1 8.8, MS SQL 2008.
    originally, my program was written for B1 2005, MS SQL 2005, and it WORKED.
    we upgraded into B1 8.8, MS SQL 2008, and now my program is not working. it is now having the mentioned error upon committing transaction (vCompany.EndTransaction(wf_Commit)). tried removing transaction handling, and it WORKED. also, tried simplifying the program, instead of creating multiple documents, i modified it in just creating one document with transaction handling, and it WORKED.
    initialliy, this issue seems to be related to MS SQL 2008.
    please help, thanks.

    Hi Emmanuel........
    You get this error due to the Approval Procedure.
    Please check if it is activated then please deactivate it from Administration> Approval> Approval Template.......
    Then try.......
    Regards,
    Rahul

  • Uncorrectable error detected by pci0... during DVMA read transaction

    hi people... at first, sorry for my english. I hava a Sun Fire 280R with Solaris 8 and today it boot aparently without a reason, it boot 5 or 6 times. The error before the fall is:
    WARNING: Uncorrectable error detected by pci0 (safari id 00000000.00000008) during DVMA read transaction
    panic&#91;cpu0&#93;/thread = 2a10001fd20: Fatal PCI UE Error
    syncing file systems... 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 done (not all i/o completed)
    dumping to /dev/dsk/c1t0d0s1, offset 429588480
    I can not make a backup and sometimes I can not logon because it cause the boot. I have reading something of this error and I have puting the machine in diagnostic mode:
    auto-boot? = false
    diag-device = disk
    diag-level = max
    diag-switch? = true
    After this, power-off and after this I have igniting the machine... I have almost one hour waiting and no notice... the screen continue black :-(
    Can somebody help me?
    THANKS! Ceci.

    Ceci,
    First off, <font color="firebrick">WRONG FORUM</font>.
    This forum is for discussions of the <u>Live Upgrade procedure</u> of installing Solaris.
    Period.
    Having said that...
    Diagnostic mode sends all console output to the TTYa port.
    You will never see the diag results on your monitor.
    Particularly for such a system as a 280R that was
    never intended to run with a graphics card and keyboard/mouse.
    Set up a TIP session and start the diag boot all over again.
    Capture all the output to a file
    You appear to have a hardware issue.
    We can only guess what the real root cause might be
    (third party adapter card? Solaris not patched?)
    You would get the best guidance and analysis if you open a service case with Sun techsupport.
    These forums are user-to-user discussions. This is NOT Sun techsupport.

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • After upgrading HANA from rev. 69.1 to rev.72 OOM errors occure during HDB startup

    Hello,
    we upgraded our HANA scale out system from rev. 69.1 to rev. 72.
    ~4 hours after the upgrade our HDB crashed with OOM errors on  the master indexserver.
    Since than we are trying to start it back up and face OOM errors during startup in the index rebuild phase:
    The errors clearly state the HANA runs out of allocatable memory for Pool/IndexRebuildAllocator during startup.
    It looks like HANA requires more memory during this phase compared to rev. 69.1
    Our Master node has 512GB of physical memory and the Allocation limit is set to 95% of this (default).
    Here is what we read from our logs during startup:
    [3331]{-1}[-1/-1] 2014-03-24 01:35:36.735498 i Service_Startup  ptime_master_start.cc(00719) : Rebuilding system indexes.
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.236971 i Service_Startup  ptime_master_start.cc(00733) : Rebuilding system indexes done.
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.237002 i Service_Startup  ptime_master_start.cc(00735) : Rebuilding indexes.
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.244660 i Service_Startup  IndexManager_rebuild.cc(00478) : Number of indexes: 2837
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.245606 i Service_Startup  IndexManager_rebuild.cc(00580) : Number of JobEx indexes: 2798
    [3367]{-1}[9/-1] 2014-03-24 01:36:33.729391 w ResMan           ResourceContainer.cpp(01300) : Information about shrink at 24.03.2014 01:28:46 000 Mon:
    Reason for shrink: Precharge for big block allocation. User size:  6269307200
    ShrinkCaller
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465154 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465164 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : Failed to allocate 48 byte.
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : Failed to allocate 48 byte.
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : Current callstack:
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : Current callstack:
    [3562]{-1}[9/-1] 2014-03-24 01:36:42.465245 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
    [3562]{-1}[9/-1] 2014-03-24 01:36:42.465256 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
    GLOBAL_ALLOCATION_LIMIT (GAL) = 520645177866b (484.88gb), SHARED_MEMORY = 243742983024b (227gb), CODE_SIZE = 6919073792b (6.44gb)
    PID=2987 (hdbnameserver), PAL=487793667686, AB=1596952576, UA=0, U=1415644701, FSL=0
    PID=3196 (hdbcompileserve), PAL=487793667686, AB=447041536, UA=0, U=356200477, FSL=0
    PID=3193 (hdbpreprocessor), PAL=487793667686, AB=416477184, UA=0, U=292814063, FSL=0
    PID=3254 (hdbstatisticsse), PAL=54199296409, AB=1040187392, UA=0, U=862081043, FSL=0
    PID=3257 (hdbxsengine), PAL=487793667686, AB=1100451840, UA=0, U=907234077, FSL=0
    PID=3251 (hdbindexserver), PAL=487793667686, AB=265382010522, UA=0, U=218447843045, FSL=0
    Total allocated memory= 520645177866b (484.88gb)
    Total used memory     = 472943874222b (440.46gb)
    Sum AB                = 269983121050
    Sum Used              = 222281817406
    Heap memory fragmentation: 9
    Top allocators (ordered descending by inclusive_size_in_use).
    1: /                                                                       218448756093b (203.44gb)
    2: Pool                                                                    214254480696b (199.53gb)
    3: Pool/IndexRebuildAllocator                                              196297409104b (182.81gb)
    4: Pool/PersistenceManager                                                 9920106968b (9.23gb)
    5: Pool/PersistenceManager/PersistentSpace(0)                              9779577952b (9.10gb)
    6: Pool/PersistenceManager/PersistentSpace(0)/RowStoreLPA                  9473884512b (8.82gb)
    7: Pool/ResourceContainer                                                  2852314824b (2.65gb)
    8: AllocateOnlyAllocator-unlimited                                         2832931544b (2.63gb)
    9: Pool/malloc                                                             2660566632b (2.47gb)
    10: Pool/malloc/libhdbrskernel.so                                           2467813288b (2.29gb)
    11: Pool/RowEngine                                                          2284285840b (2.12gb)
    12: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>/MemoryMapLevel2Blocks 2135949312b (1.98gb)
    13: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>                       2135949312b (1.98gb)
    14: Pool/RowEngine/CpbTree                                                  1417842512b (1.32gb)
    15: AllocateOnlyAllocator-limited                                           1184520640b (1.10gb)
    16: AllocateOnlyAllocator-limited/ResourceHeader                            1184517680b (1.10gb)
    17: Pool/RowEngine/LockTable                                                536881408b (512mb)
    18: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>/BigBlockInfoAllocator   360752520b (344.04mb)
    19: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>                         360752520b (344.04mb)
    20: Pool/PersistenceManager/PersistentSpace(0)/RowStoreConverter            239921680b (228.80mb)
    Top allocators (ordered descending by exclusive_size_in_use).
    1: Pool/IndexRebuildAllocator                                               196297409104b (182.81gb)
    2: Pool/PersistenceManager/PersistentSpace(0)/RowStoreLPA                   9473884512b (8.82gb)
    3: Pool/ResourceContainer                                                   2852314824b (2.65gb)
    4: Pool/malloc/libhdbrskernel.so                                            2467813288b (2.29gb)
    5: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>/MemoryMapLevel2Blocks  2135949312b (1.98gb)
    6: Pool/RowEngine/CpbTree                                                   1417842512b (1.32gb)
    7: AllocateOnlyAllocator-limited/ResourceHeader                             1184517680b (1.10gb)
    8: Pool/RowEngine/LockTable                                                 536881408b (512mb)
    9: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>/BigBlockInfoAllocator    360752520b (344.04mb)
    10: Pool/PersistenceManager/PersistentSpace(0)/RowStoreConverter/ConvPage    239075328b (228mb)
    11: Pool/RowEngine/Internal                                                  205837824b (196.30mb)
    12: StackAllocator                                                           176672768b (168.48mb)
    13: AllocateOnlyAllocator-unlimited/FLA-UL<48,128>/FreeBigBlockInfoAllocator 144301008b (137.61mb)
    14: Pool/RowEngine/Transaction                                               103391528b (98.60mb)
    15: Pool/malloc/libhdbexpression.so                                          90507984b (86.31mb)
    16: Pool/malloc/libhdbbasement.so                                            90380472b (86.19mb)
    17: AllocateOnlyAllocator-unlimited/ReserveForUndoAndCleanupExec             84029440b (80.13mb)
    18: AllocateOnlyAllocator-unlimited/ReserveForOnlineCleanup                  84029440b (80.13mb)
    19: Pool/Statistics                                                          83825720b (79.94mb)
    20: Pool/PersistenceManager/ContainerNameDirectory                           59182968b (56.44mb)
    In order to fix this bottleneck, we first need to get HDB started, but how?
    Is there a way to aviod that row store tables are being loaded during startup? (this would allow enough memory for the index rebuild)
    Is there a way to skip the index rebuild during startup?
    Can we increase the allocation limit to more than 95% of the physical memory? (e.g. we could configure swap space to be utilized, just to get over the edge of this during the startup in order to bring our HDB back up and work on reducing the memory requirement on the master index server)
    Kind Regards
    Florian Wittmann
    ps. we also have a call with SAP.

    To update everyone who runs into the same issue during startup of HANA, here is the solution that has worked for us. But I highly recommend to have such an approach reviewed by SAP service before I you perform this!
    For us the only chance left to bring HANA up was to configure swap space on the master node. (We configured 20GB...we could not know how much memory it would need during the startup to get passed the index rebuild, so that was just a guess that turned out to be just enough for us to get passed that memory peak during the startup phase).
    After that we adjusted the custom parameter file /sapmnt/<SID>/global/hdb/custom/config/global.ini
    and maintained a global_allocation_limit that we manually calculated as (512GB physical mem. + 20GB swap mem.)/0.95
    e.g.
    [memorymanager]
    global_allocation_limit=517530
    Than we started HANA up again and made use of the page file during the index rebuild in the startup phase...of course this dramatically slows down the startup...well you do an index reorg using swap space...but after 1hour we got passed the index rebuild and memory utilization went down again. (With this error we learned that HANA has a significantly higher memory consumption during startup and the upgrade from SP 6 to SP 7 must have even increased this slightly, since we managed to startup our HANA db before upgrading without this issue, but it was not the root cause!)
    Now that we had HANA back up, we investigated memory consuming indices together with SAP, and with the help of below query, we identified row store table RSMONMESS to hold 25GB of 2ndary indices!
    select table_name, round((sum(index_size)) / 1024 / 1024, 2) as
    SIZE_IN_MB, count(*) as number_of_indexes from M_RS_INDEXES group by
    table_name order by SIZE_IN_MB desc
    Before droping 2ndary indices:
    TABLE_NAME;SIZE_IN_MB;NUMBER_OF_INDEXES
    RSMONMESS;30.883,8;6
    drop index SAP<SID>."RSMONMESS~AXX";
    drop index SAP<SID>."RSMONMESS~TIM";
    drop index SAP<SID>."RSMONMESS~AU1";
    drop index SAP<SID>."RSMONMESS~RID";
    drop index SAP<SID>."RSMONMESS~AXY";
    After drop:
    TABLE_NAME;SIZE_IN_MB;NUMBER_OF_INDEXES
    RSMONMESS;5.708,43;1
    With that change we reset our custom parameter on global_allocation_limit and went back to the default (95% of main physical mem.), removed the swap file and started up HANA again...and during this startup we managed to stay in our global_allocation_limit and bring HANA back up again!

  • Error occurred during automatic upgrade of MDL file

    The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
    MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
    Detailed Error Message:
    Error: MDL1122: Import data file auto_upgrade.src not found
    Any suggestion is greatly appreciated.

    I had the same problem
    MDL1323: Error occurred during automatic upgrade of MDL file <>.
    Detailed Error Message:
    Error: MDL1122: Import data file auto_upgrade.src not found
    Reason:
    I exported mdl from 11.2.0.2 version to 11.2.0.1
    Solution:
    - Upgrade version DWH from 11.2.0.1 to 11.2.0.2
    - Install separate client on the server DWH and run import script from client directory

  • Error during installation phase when upgrading  from oracle 10 to 11g

    hi,
    We have going to upgrade oracle 10.2.0.4 to 11.2.0.3 in SAP ECC 6.4(DB:oracle, OS:AIX6.1). By mistake I run RUNINSTALLER from wrong path oracle/stage/11203 <dump folder>/database instead of SAP folder.it gives some error message during installation but i continue to installation and installation is completed.
    now i worried about error and and wrong path selection, i removed manually new oracle home folder 112_64 and continue to new installation from proper path but now i am getting below error when running RUNINSTALLER from SAP folder
    "[INS-10008] Session Initialization failed".and log are  as
    ERROR)   -  Oracle Database software installation finished with errors.
    . The Oracle executable <OH>/bin/oracle is empty or does not exist.
    . Possible cause(s): link error, installation was cancelled or interrupted, or fatal error.
    . (INFO)    -  Fatal error occurred during installation

    Hi Pawan
    Could you refer the SAP Note for Oracle Installation error
    1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
    BR
    SS

  • Error with adautocfg.sh on the DB during final stage of upgrade

    Hi ;
    I have same issue like:
    Error with adautocfg.sh on the DB during final stage of upgrade
    i folled documents but somehow i cant recreate xml file
    i use this:
    cd <RDBMS ORACLE_HOME/appsutil/bin
    perl adbldxml.pl
    but nothing happen!! it doesnt do nothing!
    i rename my xml file under <RDBMS ORACLE_HOME/appsutil/ but there is no new xml file!!
    Is anyone know why?
    Thanks

    Hi hussein;
    Those note solved my problem, but i have one other problem now.. when i try to create new context file by usng :
    perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
    i have this error:
    FOLLOWING ERROR OCCURED :
    +3 >= 3+
    StackTrace:
    java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
    at java.util.Vector.setElementAt(Unknown Source)
    at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
    at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
    at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
    Upgrade to DB 10g fails with error - cannot generate contextfile
    i found note 369179.1, Note says i need to apply lastest autoconfig patch...
    When i donwload patch 6372396 which is lasest patch number for r11( i sourced r11 env file), and try to apply patch to my system its gives me that:
    AutoPatch error:
    adprdf(): At line 3 in file u6372396.drv:
    This patch is not compatible with your on-site release:
    patch's intended release version and
    on-site          release version
    do not have identical major and minor version numbers (first two components)
    patch's intended release is "11.5.0"
    on-site          release is "12.0.4"
    Processing line   10000.
    Processing line   20000.
    +24658 lines processed.+
    AutoPatch error:
    AutoPatch encountered errors parsing and loading the patch driver file.
    +STRT_TASK: [Prereq checking logic] [] [Sun Jun 28 2009 09:04:57]+
    So i decide to apply autoconfig patch 7237313 for r12, so i source r12 env file and then start path end its ended wihtout error
    After i try to create context file by using this command again:
    perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
    and have still same error :(
    FOLLOWING ERROR OCCURED :
    3 >= 3
    StackTrace:
    java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
    at java.util.Vector.setElementAt(Unknown Source)
    at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
    at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
    at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
    so now what i have to do?
    thanks for advice

  • MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant  to repair damaged index did not work

    After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
    This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
    Following this instruction resulted in the same failure message being repeated continuously.
    How do I proceed to upgrade the Mail app.?

    If doing as the alert directs (relaunching Mail) has no effect, see below.
    The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
    ☞ All your incoming mail accounts are on an IMAP or Exchange server
    ☞ You store sent messages on the server
    ☞ You don't have any "On My Mac" mailboxes
    Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
    If you know that the conditions above are satisfied, continue as follows.
    Quit Mail if it's running. Back up all data.
    Open the Library folder in your home folder by holding down the option key and selecting
              Go ▹ Library
    from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
    Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
    Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
    If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

  • After upgrade java version - Error occurred during initialization of VM

    Hi,
    I have upgraded the java version to 6 in apps tier of my 12.0.4 ebs running on OEL 5.
    I followed below steps for this.
    Download Latest JDK 6.0 Update
    Stop All Application Tier Services
    Replace JDK Home Used With Oracle E-Business Suite Release 12
    $ cd [IAS_ORACLE_HOME]/appsutil
    $ mv jdk jdk_old
    $ mv jdk1.6.0_15 jdk
    After that when i tried to do any thin starting the services, autoconfig it gives me below error.
    $ADJVAPRG -version
    Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Do i need to update any values in XML file?
    Please help.
    Thanks,
    Kavitha

    I have upgraded the java version to 6 in apps tier of my 12.0.4 ebs running on OEL 5.
    I followed below steps for this.
    Download Latest JDK 6.0 Update
    Stop All Application Tier Services
    Replace JDK Home Used With Oracle E-Business Suite Release 12
    $ cd [IAS_ORACLE_HOME]/appsutil
    $ mv jdk jdk_old
    $ mv jdk1.6.0_15 jdkDid you complete all the steps in (Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 [ID 455492.1])?
    After that when i tried to do any thin starting the services, autoconfig it gives me below error.
    $ADJVAPRG -version
    Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Do i need to update any values in XML file?
    Please help.What does "echo $ADJVAPRG" return? Make sure it is set in the context file correctly and run AutoConfig then.
    Please see "Step 5.2: Verify Configurations On All Application Tier Nodes" section in (Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 [ID 455492.1]).
    Thanks,
    Hussein

Maybe you are looking for