32 or 64 bit Sparc patches for studio 12.3

I'm confused by the option for 32 or 64 bit patches, I installed Studio12.3 on an M4000 running Solaris 10U8. Why are 32 bit patches for sparc listed? I want the 64 bit patches correct?

If you are referring to the drop-down list where you select the platform for searching patches, I think listing 32-bit SPARC Solaris is an artifact of allowing patches for old OS versions. There has not been a 32-bit version of Solaris for SPARC for years.
The list of Studio 12.3 patches is the same whether you select 32-bit or 64-bit Solaris, and in any case each patch covers both 32-bit and 64-bit Studio components. To avoid possible confusion, select 64-bit Solaris as the platform.

Similar Messages

How to apply signed patches to Studio 11 under Solaris 10?

I'm running Solaris 10 6/06 on a Sun W2100z (x86_64) workstation. I have a long history of experience with Solaris, but I'm not terribly familiar with the things that are new or different with 10, including zones and the new patch management tools.
I want to apply the latest patches to the various components of Studio 11, e.g. 120759-08,
121018-04, etc. Since all the other patches I've applied (for other OS subsets) have been "signed" patches, I was hoping to stay consisent and apply signed patches to Studio 11 too. I've been foiled at every attempt, though, so I'm looking for some help.
- if I use /usr/bin/updatemanager to select and attempt to apply the patches, I just get error
messages saying that the patches could not be applied:
121016-03 Sun Studio 11_x86: Patch for Sun C_x86 5.8 Compiler            Failed
Utility used to install the update failed with exit code {0}.
120762-02 Sun Studio 11_x86: Patch for Performance Analyzer Tools       Failed
Install of update failed. Utility used to install the update is not able to add packages. Utility used to install the update failed with exit code 5.... and so on.
- if I try using "smpatch" to add the patch, I get this error:
$sudo smpatch add -i 120759-08
add patch 120759-08
Transition old-style patching.
Patch 120759-08 failed to install due to a failure produced by pkgadd.
pkgadd: ERROR: The package <SPROlang> is currently installed on the system in the
global zone. To install the new instance of this package in the global
zone only, you must specify the -G option. To install the new instance
of this package in all zones you must first remove the existing instance
of this package from the global zone first (via pkgrm) and then install
the new instance of this package in all zones.
pkgadd: ERROR: package <SPROlang> cannot be installed on this system/zone- if I try to use "patchadd" directly with the jar file in the current directory, I get this:
$sudo patchadd 120759-08
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
120759-08
Verifying signed patch <120759-08>...
Verifying digital signature for signer <es-signature>
ERROR: Signature verification failed while verifying certificate <subject=Sun Microsystems Inc Root CA, issuer=GTE CyberTrust Root>:<unable to get local issuer certificate>.
ERROR: Unable to verify signature for signer <es-signature>
Signature invalid on signed patch <120759-08>.
Patchadd is terminating.That's three strikes, and I'm out of ideas. Any suggestions for how one goes about applying signed patches for Studio 11? I'll switch to unsigned if I have to, but this seems like it shouldn't be this hard.
Thanks,
Tim

I started a new thread on the updatemanager forum.
http://forum.sun.com/jive/thread.jspa?threadID=107410
I found that forum by googling for "updatemanager" and "zones", but
I couldn't find any recent information on this issue. It seems the
problem has been known about for a while now.
--chris

Latest Patch for Oracle BPM 10.3.2

Hi,
I am using Oracle BPM 10g, I want to update that , I need latest patch/ hot fix for Oracle 10.3.2 with related jars and the steps for the update.
From where I can get all these documents, file and, updated files.
Thanks,
Brijesh Kumar Singh

From https://support.oracle.com/
You need a user to log and then Patches & Updates, click on Advanced Search, put Oracle Business Process Management Suite Release Oracle BPM 10.3.2 and click Search.
You will see the patches for Studio, Enterprise Stand Alone and Enterprise J2EE.
Download the one you want and the uncompressed and if it is Studio from Studio it self in File-->Updates-->Studio Local Update select the upd file.
If it is Enterprise has to be done through the AdminCenter.
HTH

[Answered] List of patches for Solaris 10 SPARC 64 bit!

Hi All,
Installation document for 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit) does not mention anything about patches required on Solaris 10 (there is a list for Solaris 8 and 9).
http://download.oracle.com/docs/cd/B19306_01/install.102/b15690/pre_install.htm#sthref110
Can I safely assume that the installation of Solaris 10 contains all the required patches in this case?
Thanks,
Edited by: Satish Kandi on Nov 19, 2008 10:21 AM

Hi Satish,
I did not have access to ORACLE metalink so could not able check the doc which you reffered. But Checked the ORACLE installation doc, I suppose that is the required patches for 8 and 9 which you have to make sure of on Solaris 10.
Other wise wait and see for other inputs too.
Hemanth might reply back some thing.
- Pavan Kumar N

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

OAS 10.1.3.5 on Windows 64 bit, NO CPU patch for April?

After reading the CPU Advisory for April CPU 2011, it appears that for OAS 10.1.3.5 on Windows 64 bit, that there is NO CPU patch for April? It only shows a patch for Windows 32 bit. They do not mean that the 32 bit patch should also be applied on 64 bit Windows o/s having OAS 10.1.3.5? I just want to make sure I skip this CPU since I have 64 bit o/s.
I ask because the list of bugs fixed in the README for the 32 bit patch list 32 bit bug fixes , and then 64 bit bug fixes.
Edited by: user12152237 on May 9, 2011 6:17 PM

Somu, please check a topic 3 lines below. No, there's not a separate 64-bit installer, but there's a work-around albeit not supported by oracle.

Weblogic 10.3.3 to 10.3.5 patch for linux 64 bit

hi,
I need weblogic 10.3.3 to 10.3.5 patch for linux 64 bit.
Thanks and regards,
Edited by: 853559 on Jun 14, 2012 8:32 AM

Hi,
the patch URL you can get from:
http://www.oratoolkit.ch/download/
but the thing is that you need to be an oracle customer with a valid customer support id (CSI) to download it. Without CSI there is no chance to get the patch.
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Need Patches for Oracle Fusion Middleware 11.1.1.7.0 with OEL 6.3 64-bit Version

HI,
I need Patches for OFM 11.1.1.7.0 version in OEL6.3 64-bit version
I have searched but could not find exact matching Patches. AS i am looking for SOA, OSB and Weblogic Specific Patches.
CAn any one please find these out.

Hi,
Refer to this doc:
Announcing Oracle Fusion Middleware 11g Release 1 (11.1.1.7.0) (Doc ID 1535341.1)
Fixed Bugs List - Patch Set 6 (11.1.1.7.0) for Oracle Fusion Middleware 11g (Doc ID 1535354.1)
Thanks,
Sharmela

Latest patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit)

Hello everyone,
Can any body let me know what is the latest CPU and PSU patch for 11.2.0.3, OS is windows 2003 service pack 2 (32 bit).
I found this patch 16042647 i don't no either it's CPU or PSU.
Re: Patch 16042647: Oracle Database Family 11.2.0.3.0 for Microsoft Windows (32-bit) - ORACLE 11G 11.2.0.3 PATCH 15 BUG FOR WINDOWS 32 BIT
Thanks

In readme file i found this that why i am confused.
Table 1 Installation Types and CPU Applicability
Installation Type Latest CPU with Security Fixes
Server homes CPUJan2013
Client-Only Installations CPUOct2012
Instant Client Installations None
(The Instant Client installation is not the same as the client-only Installation. For additional information about Instant Client installations, see Oracle Database Concepts.)

Latest patches for solaris 10 - sparc & x86

Hi,
Pls any to help me.
How can i know the latest patches is released by sun microsystem (solaris 10 - sparc & x86) ?
Thanks in Advance

Start here:
http://sunsolve.sun.com/show.do?target=patches/patch-access
and here:
http://sunsolve.sun.com/show.do?target=patchpage
You may need to sign up for a free SunSolve account.
You can download README files that show all the latest patches for latest versions, view individual patch information, etc. You need a subscription to download the full patch clusters, but you can download individual patches for free if they are security/bug fixes.

10.2.0.4 Patch for Linux 64 bits for Oracle 64 Bits on RH 5.2

Hi,
Can some one guide me to get the patch for 10.2.0.4 for Oracle 64 bits on Linux RH 5.2 64 bits please!!
thanks

Hi,
the patch URL you can get from:
http://www.oratoolkit.ch/download/
but the thing is that you need to be an oracle customer with a valid customer support id (CSI) to download it. Without CSI there is no chance to get the patch.
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Cant download Required OS and Component Patches for Sol. 10 SPARC-Sunsolve

Hi guys,
I've been trying for days now, but I cant seem to download the latest Java_ES_Required or Component Patches for Solaris 10 sparc. Whenever I try and download I get this error message from Sunsolve:
SunSolve Error
You have encountered the following error(s) or warning(s):
o An application error has occurred. The error is logged for further analysis.
The URL is: http://sunsolve.sun.com/show.do?target=patches/patch-access
Anyone know what the heck is going on, or how I go about getting Sun to fix it?
Regards
Darinder

Did you logged into your sun account and tried it.

Policy Agent 2.2 release notes highlight need for 32 bit - SPARC?

Just to be clear, I don't really believe the release notes in this case, but I would like to hear from someone who knows.
Basically this document :
http://docs.sun.com/app/docs/doc/819-2796/adtcb?a=view
Contains the following entry :
Besides Agent for Apache HTTP Server 2.0.54, web agents do not support the 64-bit version of a deployment container (6474344)
For example, Agent for Sun Java System Web Server 6.1 does not support the 64-bit release of Sun Java System Web Server 6.1.
Workaround:Except when using Agent for Apache HTTP Server 2.0.54, do not use a web agent with a 64-bit version of the supported web container.
I am trying to work out how to comply with this requirement. There seems to be no separate download of a 32 bit version of any server for sparc at present. Nor is there any production of 32 bit sparc hardware ...
respectfully
BJ

This note is applicable to agents for various web servers like Apache, Sun WS6, IIS, Sun Proxy 4, Lotus Domino etc servers. These agents are 32-bit ones by default. 64-bit support is not there yet for all the agents.
-Subba

Download patch for oracle dev 6i Forms [32 Bit] Version 6.0.8.13.0

I need to update, only patch, for oracle DEV. 6i that come with ora db 9i rel 2

If you know the patch number, search for the same on Metalink.

Oracle CPU patch for 10.20.4

Hello,
Here is my DB version.
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I am using SUNOS SPARC 64 bit server. I am going to apply JAN 2010 CPU patch. In the README.html file, i see one step as below.
If CPUOct2009 has not been applied, ensure that MLR (Merge Label Request) bugs 9054847 and 9054851 have been applied.
My question is, how do i ensure that, MLR has been already applied? Any help is highly appreciated.

If patches 9054847 and 9054851 have not been applied, you will need to apply them before proceeding to apply the CPU patch. Pl see the README files of the two patches for install instructions.
HTH
Srini

32 or 64 bit Sparc patches for studio 12.3

Similar Messages

Maybe you are looking for