320-1030

I am having an issue with the USB port. My flash drive when inserted is recognized when I click on Computer. However, when I plug in my IPOD it does not show up when I click on Computer. The same thing is occurring when I plug in my GPS for updates. Any idea why this is happening and how it can be fixed.
Thank you.

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

HP 320-1030 WINDOWS 7 TOUCHSCREEN SOFTWARE AND WINDOWS 8 UPGRADE

Just purchased an hp 320-1030 touchscreen with windows 7 operating system. The advertisement was that you could upgrade to windows 8 for $15 and HP would refund the $15.00
When you read the upgrade information it states that HP Touchsmart applications are not compatible with Windows 8 and must be uninstalled before upgrade.
The Windows 7 touchscreen came with the following touchscreen applications:
HP Touchsmart 5.0
HP Touchsmart Music
HP Touchsmart Browser
HP Touchsmart Web Cam
Canvas
HP movie store powered by Roxio Now.
Is Windows 8 going to provide Replacement applications that will function as well ?
A Little help on staying with Windows 7 for an HP Windows 7 Touchscreen or upgrading for Windows 8.
If I knew about these limitiations I would have waited for a HP Windows 8 touchscreen.

Hello Shujan
I am happy to be able to link you to your HP TouchSmart 320-1030 Desktop PC Drivers and software here. You will find if you choose Windows 7 64-bit from the drop-down box and hit "NEXT" than scroll down you will see + Driver - Original and if you click on that you will find the drivers you are looking for.
I hope this resolves your issue and would like to thank you for posting on the HP Forums and have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Win 7 pro installed on hp touchsmart 320-1030, the machine cannot boot from installation DVD. Assist

I have installed Win 7 professional on hp touchsmart 320-1030 with an OEM DVD to overwrite Win 7 premium preinstalled from factory.
I want to reboot the machine with the same DVD after completing the installation, to test for possibility of reimage in case of crash. Although in bios, I specify cd\dvd as firts boot media, the machine cannot boot from installation DVD. I have 20 machines that behave this way. Can anyone assist?
Note: I had to delete all partitions on the PC before doing a fresh installation of Win 7 pro as Premium can not joing domain.

Hello,
So, you installed Window 7 Pro with a DVD, you boot with it to install the O.S, and now it does not work?
Have you tried to load the BIOS default values or even updating the BIOS?
If it had work before, cant understand why it does not work now...
Let me know.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Can I attach a second monitor to a TouchSmart 320-1030?

Can I attach a second monitor to a TouchSmart 320-1030? It has only USB i/o ports. How do I do it? Will the software support it if I can find the right hardware? Can I use an older VHS monitor with some sort of a USB/VHS conversion gadget?

These units do not have any video out capability, you will need a USB to VGA/HDMI/DVI adapter from a 3rd party, there's no such thing as a "VHS monitor" did you mean VGA? if so then the statement above applies, as it does for all the other 9 million threads on this same subject :-)

HP Touchsmart 320-1030 Touchscreen Not working after update

Hello I bought a hp touchsmart 320-1030 pre loaded with windows 8 and once i took the free update to windows 8.1 my sound driver and touchscreen driver went. I managed to get a sound driver working but I cannot figure out this touchscreen problem. I see there are no windows 8.1 drivers but i cant find a windws 8 driver either. What should I do?
This question was solved.
View Solution.

Terrence, welcome to the forum.
From what I have read, you will need the video driver for the computer. This should solve your problem with the touchscreen.
Please click "KUDOS star" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Ssd and usb 3.0 320-1030

okay i have a 320-1030 hp touchsmart computer i was wondering if i can upgrade to usb 3.0 somehow and make use of a ssd? any help would be greatly appriciated...

or maybe can i get a whole motherboard that has usb 3.0 already on it would that work? and what about a dual drive instead of just a ssd?

Touchsmart 320-1030 Touchscreen is not working after OS re-install

HDD crashed, and was replaced with new, re-installed system from factory recovery CDs, now touch screen does not work. I have re-installed the drivers to no avail. system Properties says under Pen and Touch: No Pen or Touch Input is available for this Display. It used to work before the hard drive crashed. Is there a setting in the BIOS? or something else I may have missed?
Thanks

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to temporarily disable the touch screen in Windows 8? Touchsmart 320-1122la

Meanwhile, read this document to see if it offers any solutions:HP TouchSmart PCs - Troubleshooting Touch Screen Issues in Windows 8

Sorry that document didn't help. As for how to find your product and numbers, on my HP TouchSmart 320-1030, for example, I found both numbers on a sticker on the back of my PC, near the bottom, just under the inputs (USB, power, etc.). I also found that information in roughly the same area on my friend's HP ENVY TouchSmart 23-d034. A really easy way to find out is to press the CTRL, ALT, and S keys. The HP Support Information box will open, showing your model number, product number, serial number, and other important information. I used Snipping Tool to take a screen capture of this information on my screen, and then I printed it and emailed it to myself. It's good information to have on hand if you're getting support, making warranty inquiries, or for your insurance files, if your PC were, say, damaged in a fire, tornado, etc. Once you obtain that information, go to the Drivers and Download page. Click the Support and Drivers button, and enter your product number. Check for new drivers for your product. You can also get support and warranty information at the above link.

TouchSmart 320 wireless USB receiver

Setup instructions for the TouchSmart 320-1030 state a wireless USB receiver is needed for the wireless keyboard/mouse but none was found in packaging. Is a USB receiver needed or is the receiver built in?

Hello Dsnow:
Yes it is needed and if look behind your Touch Smart at the bottom you will see its usb port where it goes. It may be located there all ready just remove tape and push it in. It is very small and might be still in the packageing. Contact HP Direct Support if you do not have it. They will send you a new one takes up to three days because they will Federal Expres it. Your computer came with one warranty and that is covered.

Local area connection doesn't have valid ip

I have a Touchsmart 320-1030 that belongs to a friend. Everything was working fine then for no apparent reason connection to the internet was lost. They have contacted their isp and gone through all troubleshooting with them. All other equipment (ie laptops, phones, ect..) connect and work fine. The windows troubleshooter offers no help and says local area connection doesn't have valid ip is the reason it won't connect. This is true when trying to connect wired or wireless. I piddle with fixing computers as a hobby so they have asked me to see what I can do if anything. I have been Googling, reading, and trying everything I have found for three days and have had no luck. So I am hoping I can find some help here. I have never seen anything like this. It may be a hardware problem and I'm not smart enough to realise it. But I need to know that too.
System -
Touchsmart 320-1030
Win 7 Home Premium
4 gigs ram
What I have done -
Brought system to my house to see if it will connect, it does not so I am working on it here.
I have rebooted modem & router
Connected systen directly to modem bypassing router
Uninstalled and allowed windows to detect and reinstall network drivers
Updated network drivers
Updated Bios
Tryed to inatall orginal drivers from support but they wont install
I have changed from detect automaticly to use this ip in tcip ip4 and used ip I know is good to my router -
When I did this last thing the wireless did see my network but the network 2 thingy that it makes still won't connect even tho when I search for connections the list says I am connected to my network. The little thing by the clock says not connected. Also the ethernet adapter says unknown public network when I do that. Wireless says unknown public network or connection when I have it detect ip automaticly.
Network discovery will not turn on in homegroup, nether will the services assocated with it.
I have run tweaking . com firewall repair
I have uninstalled avast security, there are no other av or firewall programs
I have uninstalled bonjoir because I read that causes a conflict of somekind
I have run tweaking . com windows repair ( just in case because it looked liked the firewall repair was doing something).
I have run sfc /scannow and it found and fixed some things, ran it again and it found nothing.
I am pulling my hair out with this one. Please help.
Thanks for your time.

SSCRSR1, welcome to the forum.
Wifi problems can be very difficult to diagnose. Here is the Wireless / Networking / Internet section for the computer. Read the Wireless area to see if there is any help with the problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Speakers Disabled and Do Not Show Up in Control Panel

Hello,
I have a Touchsmart 320-1030 and have just upgraded to Windows 8.1 from a 8.1 preview build. My speakers seemed to have been disabled in the process and updating drivers hasn't worked because when I go to the control panel there are no audio devices installed under the sound options.
What steps can I take to fix this?
Thanks!

Jay, welcome to the forum.
Here is a driver that should work for Windows 8.1:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

New at computers and over 55yrs.

I am real new to the computer world I have a HP 320-1030 Touchsmart all in one desktop with window 7, 4A vision AMD, media easy touch smart 5.0, I want to be able to use my Sony Bravia KDL-37L4000 as a monitor sometimes so what do I need cable wise and how do I hook up the cables?? I have internet and cable tv reciever box. Do I need to change any settings on tv and computer?

Welcome to the forum.
I checked the specifications for your computer and I cannot find anything indicating that the system supports HDMI, which is the most common connection for Sony Bravia TVs. I did not find any other type of video port on the computer specs, either.
HP TouchSmart 320-1030 Desktop PC Product Specifications
I can offer the following idea:
USB to HDMI Display Adapter Review: Device Lets You Use an HDTV as a Second Monitor
Note that there are other brands of USB to HDMI converters -- I chose this article because it explains some the particulars about the device. You can elect to use a completely different brand; they are probably similar. I would, if I were you, read the reviews on any device you decide to buy.
When you have the connectors you need and are ready to try the connection...
Order of Events is Critical - Start Again.
Shut down the computer. Disconnect relevant cables.
Turn off the monitor or TV.
Connect an HDMI cable to the computer and to the display.
Turn on the (TV / Monitor) display, and select the HDMI input as the input source to view.
Boot the computer and log in.
NOTE:
Many TVs are not set to HDMI and have to be switched to HDMI on the TV side beforehand. Check!
Some Computers do not support a compatible resolution to support the “Extended Screen” function. You may need to opt to use “Duplicated Screens” instead to get some combinations of TV / Computer to work at all. A Symptom of the lack of compatibility: Duplicated Screen setting works but the Extended Screen setting results in the connected TV (or Monitor) going black and having to be reset.
Kind Regards,
Dragon-Fur

I cannot open Beats Audio. Get a, "Can not find startup file" message

I have an HP Touchsmart 320-1030 desktop w Windows 7 32-bit and cannot open Beats Audio. When I go to control panel and click on the beats icon I get a, "Can not find startup file" message

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no resolution, enter BIOS setup by tapping the F10 key immedaitely after powering on the laptop. Reset to Default settings.Usually done by tapping F9 key,check bottom of screen.Svae & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Tired of lies: will someone help?!?

Product Name: 320-1030
Operating System: Microsoft Windows 7 (64-bit)
Attempted to install A8-3850 as the liars here at HP told me I could do several years ago.
Was not compatible.
http://h30434.www3.hp.com/t5/TouchSmart-PC/Can-I-replace-a-Touchsmart-320-with-a-100TDP-CPU-such-as-...
So I bought an A8-3800 as it now says I can
http://support.hp.com/us-en/product/HP-TouchSmart-300-Desktop-PC-series/5146287/model/5157097/docume...
I seat the CPU, boot up, and black screen. Nothing.
Can I please get someone from HP to tell me the truth for once?!?!?!?

Ned,
I tried opening it via Internet Explorer and got this error message:
Invalid character
index.js       Line: 1
Invalid Character
swfobject.js Line:1
Object expected
index.html    Line:18
'SWFObject' is undefined
index.html
code:0
URI: file:///C:CISCO_CCNA/Exploration1_English/theme/index.html      Line: 51
                                                                                                      Char:1
What does all of that above mean?

Can't turn on pen and touch after windows 10 update

Recently updated my HP TouchSmart 320 1030 to Windows 10. Pen and touch isn't working. It does on the log on screen ONLY after the computer turns on, but not after Windows opens! I opened pen and touch in the control panel, it doesn't allow me to even select "Touch Action" to change any settings, only "Double-tap" and "Press and Hold". I went to "Tablet PC Settings" to "Calibrate the screen for pen and touch input", and attempted to "Setup" under CONFIGURE and "Calibrate" under DISPLAY, and in both cases nothing happened when I touched the screen. Basicaly once i'm logged on to Windows NOTHING touchscreen works. I know the touchscreen WORKS (since it works famously at the LOGIN SCREEN), but something with the software once Windows 10 opens? Please help.I did have pen and touch turned off when I was running Windows 7 and then I updated to windows 10 (maybe something to do with it?). Confused.I don't believe it's the updates fault I'm just frustrated it's not letting me turn it on or anything.

Welcome to the discussion area, Adrian!
It's unfortunate and confusing that Apple uses the same name for an internal wireless card on a Mac and a wireless router.
We answer questions on this forum about this AirPort Extreme.
You'll probably get a much faster and more informed response if you also post in the iMac Forum

320-1030

Similar Messages

Maybe you are looking for