320GB really the max upgrade for MacBook (Late 2008 Aluminum Uni)?

So, I've got my MacBook. It's the 13.3" aluminum unibody, from late 2008. Everything in it is stock, except I've upped the memory from 2GB to 4GB. The harddrive is still the original 250GB, which is pretty much full. I've been told by Apple that the highest capacity I can put into this one is 320GB, yet I see tons of posts from people who have put 500GB/1TB drives in and was wondering how THEY can do it, but I can't.
Any suggestions/advice?

Welcome to the Apple Support Communities
It's listed as a MacBook. See > http://support.apple.com/kb/ht1651#link2
As you can see, Apple officially supports 4 GB of memory in the Late 2008 Aluminum MacBook, but you can install 8 GB of memory without any problem. You can buy the memory in OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3

Similar Messages

Replacement keys for MacBook Late 2008 Aluminum Unibody

Is there any way to order replacement keys for the Late 2008 MacBook Aluminum Unibody model?
I ordered and received a new Enter and Shift key from numerous Apple retailers, but they do not fit properly. They only fit and snap correctly on the MacBook PRO Aluminum models.

Make an appointment at your local Genius Bar. I had a bad key a few months ago and it took all of 30 seconds for them to run to the back and replace it.

EFI Firmware Update for Macbook Late 2008 aluminum

About MacBook Pro EFI Firmware Update 2.9
This update is recommended for MacBook Pro (mid 2012) models. This update resolves an issue which can cause the system to hang during heavy processor loads.
So i just read that Apple released that for macbook pros that are running mountain lion. I have moutain lion and feel that my computer is working heavy. I just updated to the new update and my computer wouldnt load up properly so i had to do a hard restart.
Hey Apple can i get an EFI update please? Also my computer gets exteremly hot over where the battery connects.

About MacBook Pro EFI Firmware Update 2.9
This update is recommended for MacBook Pro (mid 2012) models. This update resolves an issue which can cause the system to hang during heavy processor loads.
So i just read that Apple released that for macbook pros that are running mountain lion. I have moutain lion and feel that my computer is working heavy. I just updated to the new update and my computer wouldnt load up properly so i had to do a hard restart.
Hey Apple can i get an EFI update please? Also my computer gets exteremly hot over where the battery connects.

Looking to upgrade my macbook late 2008

Hi all,
I am looking to upgrade my macbook late 2008 aluminum, i have done a little research and found a few parts which i want to install in my macbook. I just wanted to know if my mac was compatible with the following hardware:
Hard Drive:
Samsung Spinpoint M8 1TB 2.5 inch SATA II 8MB 9.5mm Hard Drive
Memory:
Komputerbay 8GB (2x 4GB) DDR3 SODIMM (204 pin) 1066Mhz PC3 8500Al
My macbook specs are:
Model Name:          MacBook
Model Identifier:          MacBook5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz
I am thinking of installing these by myself, if this possible? And if so how could i go about doing this?
Thanks for reading, i would appreciate any help.

Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the RAM on the Aluminum Unibody.
http://eshop.macsales.com/installvideos/macbook_13_unibody_mem/
And read this before putting 8gb in your MacBook http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb

I need to upgrade my MacBook late 2008, what are my options

I need to upgrade my MacBook late 2008, what are my options. I have already upgraded RAM to 4 GB some 4 years ago. Also replaced HDD to 1TB, but ended up with a slower response. I am looking to switch the HDD again to speed up the performance. Any suggestions?
I am open to upgrade the hardware, what options do I have?
Motherboard?
HDD?
Anyway I can increase RAM from 4 GM to higher?
Appreciate tips...

It was a mistake on my part, I tried reinstalling the RAM chips... I love the speed now...
next step to switch to 1TB SSD.... Another $700.00 and my 6+ year McBook will be new again

Even though the battery in my Macbook late 2008 shows 995 charged the power adapter light continues to glow red. What do I need to do? s/w fully uptodate, plenty of ram and hd space.

Even though the battery inb my Macbook late 2008 shows 99% chrged the indicator glows red(amber?) What do I need to do? s/w is up to date. Plenty of RAM and HD. s/n W8*******1AX
TIA
<Edited by Host>

Might be the adapter > Apple Portables: Troubleshooting MagSafe adapters

Upgrade SATA drive for macbook late 2008

Hello!!
I am here to ask for help. Let me tell you a bit more about my Mac:
Late 2008 silver 13" MacBook 250GB 2GB RAM 2.4GHz IntelCore2Duo DDR3 MB467LL/A, currently at 10.5.8 OSx system (yes I know I need to update the software as well!)
I currently bought 4GB kit (2x2GB) RAM to upgrade on my silver MacBook (late 2008), and would also like to update my hard drive.
I have looked around on online shops for 2.5" 9mm SATA drive, and came across to 1TB for not too bad a price (between £85 to £100).
Anyone know whether if this is ok for my laptop?
Samsung, WD Scorpio Blue and Toshiba, all are at 5400rpm for 1TB. (However there is 750GB Seagate 7200rpm 16MB - recommended???)
Large memory/drive are usually much needed with me as I do use a lot of design work e.g. Adobe InDesign/Illustrator/Photoshop...you get the drift .
Any advice would be much appreciated!
Looking forward to hear from you soon!
Thanks again,
ejburton.

If all the technical specs (like SATA, physical dimensions, power usage etc) all match then you can use any drive of any available size in your MBP. Right now it appears that the largest available is the Western Digital 250GB 5400rpm drive where as the fastest is the Hitachi 200GB 7200rpm drive. Fujitsu and Toshiba have annonce 300GB drives though I've not heard that either are yet shipping.
I have to say that I'm very pleased with the Hitachi 200GB 7200rpm drive.

Cover/Case for 13" Late 2008 Aluminum MacBook?

I have a 13" late 2008 aluminum MacBook and am trying to find a cover/case (preferably the hard shell) that will fit it. I read that they are no longer made for this model so it will be hard to find. The websites I found that offer cases for this model were not able to say that it would be a guaranteed fit. After seeing so many reviews about how they don't fit this model, I am hoping that someone on here could direct me to a website that sells ones that will for sure fit.

Go to OWC's site,
You'll see the selections on that page. Great company. No hassle returns and great support.
DALE

Where can I find the latest upgrades for Crystal Reports 2008

Hello all
My question is rather simple, I need to know. Where can I find the latest upgrades for:
1) Crystal Reports 2008 Merge Modules
2) Crystal Reports 2008 Runtimes.
Are they incremental upgrades ????
Thanks in advance..
ADrián.-

Downloads page is here:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
[This|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs] wiki tracks latest SPs and FPs with download links.
[This|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki has links to runtime (I believe I have not updated this for FP 2.5 yet, but the downloads page has these)
And yes, they are incremental.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Clean install for the 1st time from Macbook late 2008

Hi all!
I'm doing a clean install for the first time before installing Maverick. I have a Macbook from late 2008, which came with Leopard, but I always did an upgrade whenever installing Snow Leopard, Lion or Mountain Lion.
My question is when I do the clean install, the laptop goes back to factory settings, right? Do I need to install all the operating systems or can I go straight to Maverick?
I'mthinking of creating a bootable usb drive with Maverick or should I just install it from the Apple store?
It's my first time erasing the hard drive, I don't want to damage anything, just trying to be extra careful.
Thank you in advance for the help

The hard drive is wiped clean, but the hardware is the same. There is no "factory settings" until you actually install an operating system. In your case it will be Mavericks. Your laptop did not come this way from the factory.
To return to true factory conditions you have to install the OS that came with your computer. I know this seems like nitpicking, but it's better to have the facts straight.
Make Your Own Mavericks, Mountain/Lion Installer
1. After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2.   Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
         a. Open Disk Utility in your Utilities folder.
          b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Click on the Partition tab in the DU main window.
          c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
          d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
          e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
          f. Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3.          Use Lion DiskMaker 3.0 or DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Suitcase for MacBook (Late 2008)

Hello,
I am using the MacBook for business meetings. Often the MacBook is in an traveling bag but that is roughly handled. I am searching for a stylish suitcase for this MacBook, with place for the MacBook, the adapter and some documents. I'd like the suitcase to be alumium style. A lock would be nice, but not needed.
Searched some sites, but the most is for the MacBook Pro and not the 13" MacBook.
Anyone has experience with a suitcase for his MacBook?

I can't think of any at the top of my head, but there are sleeves and cases that you can put into another bag w/ other stuff.. something such as the apple sac cover the laptop and also have a little places for the magsafe

HDMI Port for MacBook (Late 2008)

So I was wondering... Is there a way I can hook up my Mac to the Tv (BTW I don't have a built-in HDMI port)?

Depends on what input plug you'll be using on your TV. VGA, DVI, Composite or HDMI. You'll need a Mini-DVI (Not Mini DisplayPort) adapter and a cable from that to your TV. Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
(Composite is the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs.)
You'll also need audio cables to the TV if you use VGA, DVI, or Composite using a 3.5mm stereo headphone jack to RCA sound plugs or a 3.5mm stereo input plug for audio. You attach it from the headphone jack of your MacBook to the appropriate audio input plugs on your TV.
If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. You attach it from the headphone jack of your MacBook to the appropriate audio input plugs.
The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. Check your TV manual though to see if it might have audio plugs that work with one of the HDMI ports. You attach it from the headphone jack of your MacBook to the appropriate audio input plugs on your TV.

Will Macbook late 2008 aluminum work with N wireless router?

I see in the tech specs that it is a/b/g compatible. Will it work with an N router?

Welcome to Apple Support Communities.
The short answer is 'Yes', it will work with an N router.
http://support.apple.com/kb/sp500
Why the 'draft' notation?
The 802.11n draft specification was originally introduced in 2003.
It was not finalized by IEEE until September 2009.
Details here, but fair warning: The IEEE pending/finalized/withdrawn 802.11 spec chart is enough to make your eyes bleed!
http://www.ieee802.org/11/Reports/802.11_Timelines.htm

Upgrading MacBook Late 2008

I’ve had my MacBook 13″ Late 2008 now for three and a half years, and it has been used every day since I bought it, and with every passing day, it’s getting slower and slower. I’ve checked with every forum out there to find methods for speeding it up, but nothing works! I’m therefore convinced my hard drive is failing. I want to get a new one, and better memory than the standard 2Gb while I’m at it, rather than buy a whole new MacBook. Luckily, I have a few pennies saved up and want so splash out to get the creme de la creme of upgrades. Any advice on the latest gadgets? Both for hard drives and memory? Can SSD's be put into the late 2008 laptop? Thanks, C

You are also able to upgrade to Mountain Lion.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Do I have all the parts to replace my HDD with a new SSD on my Macbook (late 2008)?

Hey everyone, I am trying to figure out if have all the parts to replace my hdd with a new ssd on my macbook (late 2008 aluminum).
I just bought a crucial mx100 SSD and plan on replacing my mac HDD. I have the appropriate screwdrivers, and a bootable OSX on a usb drive. I also purchased a sabrent usb 2.0 to sata/ide hard drive adapter.
How do I replace and install OSX on my new SSD?
From what I read here are the steps I'm planning on taking.
1) Detach the old HDD
2) Attach new SSD.
3) Turn on computer and use the bootable usb drive to install OS X.
Does that work, I think I read somewhere about maybe formatting the SSD before I can use the bootable usb. Any input or help would be awesome. Thanks.
I'd prefer to do a clean install of yosemite and not carbon copy my old HDD

Hi Bradtk24,
On this site you will find the requirements for the physical change that you want to make.
These pages will give you insight into the processes required for the software side of things. It might be slightly dated, but the principles remain valid.
Have fun
Leo

320GB really the max upgrade for MacBook (Late 2008 Aluminum Uni)?

Similar Messages

Maybe you are looking for