32bit DIFx Driver Installer Error when Installing 9.0.2

Never had a previous problem with iTunes and when I went to use it this morning, it crashes everytime. Uninstalled completely, reinstalled 9.0.2 and now I get an error "32bit DIFx Driver Installer" and iTunes "finishs" installing and crashes after opening again. Have tried unsuccessfully to figure out a fix for this. All my children got iPod Touches for Christmas and I got a brand new iPod nano and none of us can use them now. Please help!

Hey guys! So, I experienced the same issues with the newest iTunes update. I updated several days ago, but I used iTunes for the first time since the update today. iTunes would load but immediately display a message that it needed to close. After several attempts to open iTunes, I reinstalled QuickTime as suggested by another website. Also suggested was trying to repair QuickTime and iTunes. When that didn't work, I removed both QuickTime and iTunes and did a clean reinstall from new downloads. When I did this, I got the 32bit DIFx Driver Installer error. It "finished" the install, but it still closed immediately upon opening. I ran Malware-Bytes and Hijack This to check for spyware/adware/mal-ware a few days ago so I was fairly certain my system was clean...but after two hours of trying to figure out this problem, I decided to go ahead and check for virus or malware.
Indeed, I found six files (mostly located in the System Volume Information folder). After having Avast remove these files...iTunes successfully installed without the DIFx error! So much for being "sure" my system was clean. The files found were all related to the Win32:Malware-gen virus.
So I suggest you check your system for malware and virus infection. I did my scan in safe mode and did the most in-depth search that Avast will perform. I highly suggest doing a full search with UPDATED virus program even if you think your computer is okay.
I have had no issues with iTunes after cleaning my computer!

Similar Messages

Installation error when installing CS6 on Mac?

I keep getting an installation error when I try to install CS6 on my Macbook Pro. It says "installer failed to initialize, this could be due to a missing file". It also shows troubleshooting tips. I have tried them and none of them work. I also tried disc repair and multiple other troubleshooting advice from this site. Nothing has worked yet. Help!

does your macbook meet the system requirements:
Mac OS
Multicore Intel processor with 64-bit support.
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems. Refer to the CS6 FAQ for more information about Mac OS X Mountain Lion support.**
4GB of RAM (8GB recommended)
15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required and second professionally calibrated viewing display recommended for Adobe SpeedGrade
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java Runtime Environment 1.6
Eclipse 3.7 Cocoa version (for plug-in installation of Adobe Flash Builder; the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
Dedicated GPU card recommended (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
if so, attach a screenshot of the error.

Installation error when installing Oracle 8.1.7

I'm currently upgrading 8.0.5 with 8.1.7. When installing 8.1.7 I receive the following error message:
O/S error in starting service Oracleora81DataGatherer
Has anyone seen this and is there a fix?
thanks
Mark
null

Hi,
Please check up if any TNSListener (of older version , from previously installed RDBMS ) is already running in the system.
Statup->controlpanel->Services->%TNSListener%.
If so, please Stop the listener,while you install the oracle.
Else, While you install oracle, don't create starter database.First install Oracle, after that, create the DB using "Database configuration Assistant(DCA)", life will be easier!!
Regard
karthik

Installation error when installing BO XI 3.0

Hi Everyone,
I am getting an error when trying to install BO integration Kit XI 3.0. The error is
"Module C:\Program Filed\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CrystalExtension.dll". Any idea about this??
Crystal Objects Version : 12.2.0.290

Ingo,
I am downloading the Integration kit from this location..
http://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]

Oracle Universal Installer Error when Installing Oracle database Software

Hi Guru's
we are installing SAP ECC 6.0 on Linux:Oracle, we start the installation fine until we reach the oracle software installation step. we login as ora<sid> then set the DISPLAY variable setenv DISPLAY 192.168.1.155:0.0
The csh shell is the one that is being used we find this after executing echo $SHELL, when we execute echo $DISPLAY it returns 192.168.1.155:0.0.
When we run ./RUNINSTALLER it then returns Failed the DISPLAY variable is not set correctly, to check if it working execute xclock, we run that and it displays the clock.
what could be the problem with this installation.

I am trying to install Oracle 10g on Suse Linux and I am getting the
following error...
Checking monitor: must be configured to display atleast 256
colors Failed <<<< >>>> could not execute auto check for display colors
using command /usr/X11R6/bin/xdpyinfo check if DISPLAY variable is set.
I checked the DISPLAY variable and it is set right.

Windows installer error when installing iTunes 10.5

Every time I try to download the new iTunes I get the following error:
"There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

Hi!! I finally found a solution
I´m Sure this one will work for everyone
-First you have to uninstall all Apple Software using Control Panel
-Download Unlocker Software from softsonic heres the link http://tinyurl.com/3e8gj2h
or google it
-Install Unlocker
-Go to Start and type this in search: %programdata%
-ProgramData window will open, so find apple folders
-Right click in each apple folder and find Unlocker in the options
-Choose Delete each apple folders (with unlocker program)
-Go to My PC, C Local Disk and find Program Files
-Look for Apple folders and Delete them (with Unlocker)
-Find a Folder (in Program Files) called Common Files
-Delete all Apple Folders (in common files) with Unlocker
- Empty your trash can (thats what i did)
-Reboot
-Install Itunes
Note: You can Reboot or use Safe Mode to use Unlocker if it doesnt work.
....and that's All
AFTER Days of frustration LOL
Good vibe, Love and Blessings for all!!
Jorge from Mexico
NOTE: YOU WILL NOT LOOSE YOUR PLAYLISTS OR MUSIC

Installation errors when installing trial version of Photoshop CC

Hi,
I'm trying to install a trial version of Photoshop CC on a Macbook Pro running Mavericks. The app won't install; the error message is 'Some items for the following product(s) could not be installed successfully.' The error summary is as follows:
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DF024 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 4 error(s) ----------- Payload: Camera Profiles Installer 8.0.0.0 {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} ----------- ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/CameraRaw/CameraProfiles/Adobe Standard/Canon EOS 1000D Adobe Standard.dcp" (Seq 2) ----------- Payload: AdobeColorPhotoshop CC 5.0.0.0 {5C5D62C9-91C6-415E-857E-9130C0F52C66} ----------- ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/Color/Profiles/Photoshop4DefaultCMYK.icc" (Seq 1) ----------- Payload: AdobeColorVideoProfilesCS CC 5.0.0.0 {CE9B1B00-0421-4701-9698-1C14646D6D94} ----------- ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/Color/Profiles/VideoHD.icc" (Seq 2) ----------- Payload: Adobe Photoshop CC Core 14.0.0.0 {AA01D250-3E72-4FD7-9A3B-F9A9C1DBC016} ----------- ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/HelpCfg/cs_CZ/goURL_lr_photoshop_cz.csv" (Seq 3860) -------------------------------------------------------------------------------------
System Requirements
My MacBook is a 2 GHz Intel Core 2 Duo, 4GB DDR3 memory, Graphics: NVIDIA GeForce 9400M 256 GB, OS X 10.9.2
Any help would be gratefully received.
Thanks.

Full error summary here:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Camera Profiles Installer 8.0.0.0 {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} -----------
ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/CameraRaw/CameraProfiles/Adobe Standard/Canon EOS 1000D Adobe Standard.dcp" (Seq 2)
----------- Payload: AdobeColorPhotoshop CC 5.0.0.0 {5C5D62C9-91C6-415E-857E-9130C0F52C66} -----------
ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/Color/Profiles/Photoshop4DefaultCMYK.icc" (Seq 1)
----------- Payload: AdobeColorVideoProfilesCS CC 5.0.0.0 {CE9B1B00-0421-4701-9698-1C14646D6D94} -----------
ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/Color/Profiles/VideoHD.icc" (Seq 2)
----------- Payload: Adobe Photoshop CC Core 14.0.0.0 {AA01D250-3E72-4FD7-9A3B-F9A9C1DBC016} -----------
ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/HelpCfg/cs_CZ/goURL_lr_photoshop_cz.csv" (Seq 3860)
System Requirements

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Errors when installing Photoshop CS6

Errors when installing Photoshop CS6

I am having a similar issue trying to download PS via CC.
Mac OSX
Here are the details from the installation error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS001 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s)
----------- Payload: Camera Profiles Installer 7.0.0.0 {539AEF15-3A2B-4A31-A587-7E90F7D9C700} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRawProfile7.0All/AdobeCameraRawProfile7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Player for Embedding 3.3 3.3.0.0 {2591B843-8028-4395-9DEE-03AF8D631539} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeAPE3.3-mul/AdobeAPE3.3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: PDF Settings CS5 10.0.0.0 {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {4FFA83C0-007A-4DB3-955C-B5EEE73BEDAF} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/SwitchBoard2.0All/SwitchBoard2.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeCMaps CS6 4.0.0.0 {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCMaps4-mul/AdobeCMaps4-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Suite Shared Configuration CS6 3.0.0.0 {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeSuiteSharedConfiguration3-mul/AdobeSuiteSharedConfiguration3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Utilities CS6 4.0.0.0 {4F427880-01EA-4E0F-AAE2-9ADE97563A21} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeUtilities4.0-mul/AdobeUtilities4.0-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe XMP Panels 4.0.0.0 {148542D8-49CA-482A-A334-1D54C5A9D53B} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeXMPPanelsAll/AdobeXMPPanelsAll.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobePDFL CS6 10.9.0.0 {557F9FD3-EED8-43D7-AF29-0F19CA832728} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFL10.9-mul/AdobePDFL10.9-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeTypeSupport CS6 11.0.0.0 {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeTypeSupport11-mul/AdobeTypeSupport11-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Photoshop Camera Raw 7 7.0.0.0 {CFC3110A-491C-4DBF-A97D-66C567600A2F} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRaw7.0All/AdobeCameraRaw7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Support 13.0.0.0 {1F955A4A-F365-4379-AEE2-B7C83E1AA883} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Support/AdobePhotoshop13-Support.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Driver 13.0.0.0 {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Driver/AdobePhotoshop13-Driver.dmg. Please verify that the disk image is not corrupt.

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

32bit DIFx Driver Installer Error when Installing 9.0.2

Similar Messages

Maybe you are looking for