32bit transfer mode and other ide bios setting?
I have been using this 865pe neo2-p for a few weeks now and am looking in the bios to see what can be improved.
I had 32 bit transfer mode to off by def. and i set the to on , ? and in pnp the ide busmastering was disab. should I have it enab.?
using winxp pro.
P4 2.4 northwood
11024 ram -2 512mb
ati 9200 128 mb
ati tv wonder pci
2 WD 100 gb 8mb buffer hd
1 dvd-r
1dvd+r
running new bios3.0a
Quote
Originally posted by Kingfisher
Do NOT set 32bit to on as it will cause error in XP.
Kingfisher, that's the first time I heard about this...do you have any case wish to share?
Similar Messages
-
K7T266 Pro2 - 32bit transfer mode
Hi All !
At first, I have K7T266 Pro2 - MS-6380 Ver2.0, WDC800BB (80GB/7200RPM), BIOS 3.6, AMD XP-1800+, 2x256DDR CL2 Apacer, Win2000, Via4in1-4.43.
I have seen some messages which spoken about "32bit transfer mode ON". But on my mobo there is not possible to set this feature "ON". During post I can see that 32bit transfer mode is OFF.
1) So, is there any possibility to set this 32bit transfer on my mobo ?
2) Second problem.My disk make clunking and clicking sound when is not empty, and there is some fragmentation (is full for 70%). Sometimes it stops work for a while (1-2sec). All disk reports like a surface scan (from WDC) and S.M.A.R.T. reports are successful. After I have removed all files it was ok for a while, until it was again filled with files. Where the hell could be the problem ? Could anybody help me ?
Thank you
Marek ?(Thank you.
Yes I am sure the disk is going down... But I can not prove this fact. All test all successful ;(
The problem with HDD is the seller can not accept complaint until disk will be damaged. Now I have to wait till my disk will go down.
So what should I do...I have to buy another due to data backup.
Have a nice day
Marek -
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want. -
i can't transfer music and other files from library to my iphone 4 by dragging it.can anyone help me?is there any other way to transfer files into iphone?
If you want to drag and drop ( don;t know why you would do this), you will have to check manually manage music.
Why not just sync?
iPhone User Guide (For iOS 5.0 Software) -
Why won't the "block cookies and other website data" setting work on Safari 7.0.2?
Why doesn't the "block cookies and other website data" setting on Safari 7.0.2 work? Everytime I try this setting, I still get cookies and other data that needs to be deleted from my computer.
This has been the case for sometime.
There is no effective way to block these cookies.
Try this, may help.
Safari > Preferences > Security > Cookies and other website data:
Press "Remove All Other Website Data:'
Do this twice.
Select "Reset Safari" from Safari drop down menu.
Select only "Reset all website data".
Click "Reset". -
IPod Touch 4th Gen. iOS 5.1.1 - Sleep Mode and Other Questions
Hello,
I have an iPod Touch 4th generation with iOS 5.1.1
1) RE: Sleep Mode - I found this on another thread and it's regarding iOS 4.3.1.
Is the same still true for iOS 5.1.1?
If so, what is recommended for sleep mode - Airplane mode or Wi-Fi off - or is either one ok?
Wi-Fi is always ON with the 4th generation model running 4.3.1 when it is sleeping unless you either turn off the Wi-Fi or turn Airplane mode ON.
2) I only use my iPod Touch on my home Wi-Fi and do not use any cloud based syncing or iTunes Wi-Fi Sync. I do all my syncing manually from my MacBook Pro via USB to the iPod Touch. The way I do things is purchase what I need from my MacBook Pro via iTunes and then manually sync it to the iPod Touch. But there may be times, in the future, where I would want to purchase directly from the iPod Touch.
I recently updated my AppleID with my new email address via my MacBook Pro. But, I noticed that on my iPod Touch under "Settings" "Store" that it still shows my old AppleID. I have all Automatic Downloads set to OFF. How do I update the iPod Touch to reflect my new AppleID?
3) When I'm using Safari and I navigate to several websites, how do I easily get back to my home page (which is set to Yahoo!)?
Probably a dumb question but I can't seem to figure it out. I've set Yahoo! to my homepage but I would think there should be or is (and can't find it) a button/icon like on my MacBook Pro Safari to take me directly back to the homepage.
Thanks in advance for the help!- Unless you use bluetooth, airplane mode and wifi off are the same as regards to battery drain. I like use airplane mode sinc that is directly under Settings.
- Go to Settngs>Store and sign out of existing account and sign in with the updated one
- I have no idea for the Safari question -
Can't record when box is in standby mode and other...
Once my youview box has been put into standby it will not turn on with just one press of the remote but if I press the button 10 to 15 times it will usually come on after 4 to 5 minutes. during this time, the remote will not switch my Sony Bravia tv on but it will shortly after the youview box comes on. To compound the frustrations, I will usually get an IPC6023 message on the tv screen telling me that the channel I'm tuned to is unavailable but the channel is patently available because once I have pressed the ok button three times the channel plays with perfect picture and sound.
Also any recordings scheduled whilst the box is in standby mode either fail or just do not record. I presume this is because of the IPC6023 problem.
One other thing. I am at the moment watching the tv but the youview box is showing the mauve standby light rather than the blue lights which should indicate it is on and also the recording light is on despite the fact that it is not currently recording any programmes, I presume the recording light is on because the box thinks it is still trying to record a failed programme which was set to record whilst the box was in standby mode.
I have checked my broadband and cables and they do not seem to be the problem
BT has supplied me with a 2nd Youview DTRT2100 box and this has exactly the same problems. I changed the hdmi cables and the Ethernet cables after finding this same problem occurred on the 2nd box but there is no difference.
I have now had 3 Cube engineers visit to check my problem but all they do is a factory reset, deleting any recordings that I have managed to make while the box is not in standby mode and then leaving with the problem unsolved, Now that I’ve received a replacement box which has exactly the same problems, I do not want to go through the whole rigmarole againHi Colin6443,
Welcome and thanks for posting!
Sorry for the problems you're having with your Youview box and that it's going on for so long.
Send over your details and we'll help get things sorted from here. Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Configuring 6533 transfer mode and parameters
I'm a PhD Student at the University of Naples, Italy.
I'm planning to use a PCI-DIO-32HS (PCI6533) board for my application, but unfortunately I haven't got this board at hand yet.
I'm currently designing the software program, and I need to know how I can configure the following characteristics:
- grouping ports;
- transfer direction;
- handshaking protocol;
- ACK/REQ polarity;
- interrupt/DMA;
- startup sequence;
- programmable delay.
Fundametally, I wonder whether all these characteristics can be configured "off-line" via MAX, or rather it is strictly necessary to build a set of VIs to enforce the parameter values in the LabVIEW program.
My aim is to use the PCI-DIO-32HS board for obtaining two inde
pendent groups (one for input and another for output) using unbuffered handshaking.
Could I use the "Dig Word Handshake In(653X)" example VI to build upon it my application, and **at a later time** use MAX for setting all the characteristics listed above? And, if this is not possible for all the above characteristics, which one need to be set explicitely in the LabVIEW program?
I really thank you for your attention.You won't be able to do this configuration within MAX. You will perform this configuration within the programming environment (LabVIEW in this case).
I would definitely use the shipping example programs within LabVIEW as a reference and a starting point. The example program you mention has two VIs (Digital Group Config VI and Digital Group Read VI) that allow you to configure the options you mention (grouping ports, direction, etc...). I would take a look at the help for the digital VIs used in example programs to see which VI can do what. The Digital Mode Config VI can be used to set the handshaking protocal and the ACK/REQ polarity.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer -
Transfer speed and other minor bits
First off - I love my iPod (40g Colour) and despite my regular bouts of impatience when updated, loading etc I am very happy with the thing. I even bought my wife a shuffle and she likes that for when she's at the gym. I found the software/hardware to be very forgiving.
However I thought I'd post a query to see if anybody had any ideas on my minor problems.
1) When we loaded my wife's shuffle for he first time we had problems with the USB 2 convection. PC keeps saying "this item can run faster connect to a USB2 ....." but it is connected to a USB 2 socket. Now everytime I attach either iPod the same warning comes on (except if I connect before starting!). I know its a USB 2 because a new board was fitted a while ago and my 40g will synch and charge on the connection.
2) Slow transfer. I recently loaded iTunes 5.0 which didn't work for me (see 3). So I wiped it and loaded a copy of 4.9 (thanks to filehippo). Im up and running again but had to re-synch my iPod to iTunes. The tranfer rate is about 500 tracks per hour so to do the 8500 that my iPod takes needs 17 hours. When its done I should'nt need to do it agin for a while but could I speed things up a bit?
3)Should I go to iTunes 5.0.1? 5.0 loaded on my PC fine without all teh problems that have filled these oages recently but when in 5.0 I connected either iPod (shuffle or 40G I got an error somthing like "Ipod not recognised re-intall iTunes". I know some other people had a similar problem. iTunes 4.9 is working fine but is it safe for me to try 5.0.1 yet?
Sorry to go on a bit but I know from watching these forums recently there are some very knowledgeable and helpful people out there so I hope you don't mind my request.I've had some news - most of it good. I got fed up with the transfer speed so I took my box into my local store to get it checked out. No visible fault on my USB 2.0! I know it happens but they couldn't replicate it so I went home. Plugged all my stuff in except USB devices. Plugged in my iPod and it worked. I was now thinking about power requirements etc. Plugged in my USB modem and the iPod still updated at USB 2.0 speed. Next I tried my wife's shuffle - so far so good. I then plugged everything in and the iPod defaulted back to USB 1.1!
Tried the shuffle in the spare USB2.0 socket and it worked. Plugged my iPod in and that worked - Now I knew what the problem was - I only have 3 USB 2.0 sockets (5 USB1.1)and two had faulted.
Next step will be a new card with a fire wire socket! Happy Days - although I still cant get an extension cord to work with my iPod.
While I was on a roll I took the bull by the horns and loaded iTunes 6.0. Works like a dream although it is a bit slower than 4.9 - probably considerably bigger but it works!!
My turn to be the lucky one this week!!! Maybe your turn next. -
I just broke my older Acer Aspire 4752G.
I just backup entire Partition my Windows 7 Home Premium (32bit) with Acronis True Image Home 2014 BootCD Premium.
intend to restore in this brand new Acer Aspire E1-410.
Acer Aspire E1-410 don't have Legacy Option only UEFI
Acronis True Image Home 2014 BootCD Premium fully support EUFI but alas my Original Windows don't boot
So I intend to use repair BootRec command prompt
These CD Windows won't detect in these Acer
So I call Acer Technical Support They said :
there is NO OTHER WAY to change this UEFI to LEGACY MODE (Build-in Bios mode CANNOT change other than UEFI)
you must install via DVD who FULLY SUPPORT UEFI -> Windows 8 or Windows 8.1 (ONLY in x64bit mode).
I hope you can resolve these for me.
Thank you.It is possible to install Windows 7 Home Premium 32-bit from DVD to a UEFI based hardware, but must be done using an answer file. It may or may not work if you are using a recovery DVD. Either way, the OS is not supported on that hardware.
Windows 8 32bit is supported on UEFI hardware.
The problem with Win7 32bit on UEFI is a problem in the bootloader. The OS cannot boot because the bootloader cannot find the OS. I had suspected it may be possible to get the OS to boot by using BCDBoot, but since it isn't supported I have not put in any
effort to determine the method of doing it. -
Extremely slow navigation in full screen mode and other erratic behavior
Hi,
Is it me or every new release of PSE feels heavier and more bloated than the previous?
I have PSE9 running on a dual core, one year old dell PC with W7 with 4GB of RAM. I have the maximum amount of recommended memory alloted to the program (set in preferences).
Ever since I upgraded, moving forward (or backward) to the next pic (via pagedown, or up) through the filmstrip in fullscreen mode has become very, very sluggish. Sometimes it just will not move to the next image even when thi image is in the same directory as the previous one.
Is this sluggish navigation normal? Or is there something that I can do to improve performance??
I look at images in fullscreen mode to decide which ones to edit and which ones to delete so I use this feature a lot. Another example of sluggish-- or in this case erratic-- behavior happens when looking at an image in full screen and then I decide to edit the image. I load the image to the edito by clicking the editor icon on the left options pane. Even if the editor is already open, sometimes it brings the editor to the ferground with the image ready to be edited and sometimes it does not; I have to cycle with alt-tab to make the editor active. Why this erratic behavior? Then, after saving an image and selecting the close button, you are supposed to be returned to the organizer... well this happens sometimes, other times I have to manually swithc using alt-tab.
Please help, this is very annoying.Pabloelchico wrote:
...I then import these as managed reference files into Aperture.
I don't understand whether you have a Referenced-Masters Library or a Managed-Masters Library. Drives slow as they fill and with a Managed-Masters Library sooner or later the internal drive will become overfilled. I recommend a Referenced-Masters Library with Masters on an external drive and the Aperture Library on the internal drive.
iMacs, laptops and Minis are by definition limiting to heavy Aperture usage, so work carefully to optimize setup and workflow.
First is to max the RAM and make sure the hard drive stays less than 70% full. Restart the iMac prior to a major Aperture session and only have Aperture open. You should also investigate to see if a substantially more powerful video card is available at reasonable price.
Set Preview size to be exactly screen size and build Previews manually when the box is otherwise not being aggressively used.
HTH
-Allen Wicks -
How do you transfer contacts and other info from one gmail address to another?
Somebody screwed up my gmail so I created another account which does synch with my android phone which the other does not. But I lost all my contacts from the phone. The contacts still exist but they are on the old gmail account which does not synch with my cellphone. How do I transfer my addresses and phone numbers from one gmail address to another?
That is a question for Gmail support.
https://support.google.com/mail/?hl=en -
Cheap SSD solution for Pismo (and other IDE/ATA laptops)
I have a Pismo 400 that is now relegated to web surfing duties for my children and not much else. The original Fujitsu 6 Gig hard drive was sounding more and more like farm machinery, so I thought I'd try a do it yourself solid state drive instead of picking up a laptop drive that'll never be filled up and is pretty much obsolete for any other purpose.
There's a store on eBay that sells adapters for Compact Flash memory cards so they can be plugged in as a 2.5" IDE hard drive. This places sells them for $5 Canadian with free shipping from Hong Kong, whereas in Canadian stores these are around $25. I ordered one and it came in about 10 days.
I went to a computer parts store and purchased the cheapest 8 Gig CF card listed as 133x. It came to just under $30 Cdn including taxes.
The adapter seems to have one more pin on the IDE side than the original drive (or the Mac socket has holes), but the socket on the Pismo has a rubber spacer (rather than hard plastic) so you just plug them in.
After a typical for Pismo exhausting 1-2 minute installation process, I fired it up. It didn't see the drive when I booted with an OS X 10.3 install disk. I suspect if I'd used the original OS 9 CD it would have found the drive, which was formatted FAT. I pulled the CF/IDE combo out and plugged it in to a USB/IDE adapter and formatted the card on my MacBook. Back in the Pismo the drive was found and I installed OS 9 and 10.3 and updated them to 9.2.2 and 10.3.9.
The card and adapter aren't attached to the Mac and just hang off the end of the ribbon cable in the drive cage. If I were hauling the Pismo around a lot I'd make up a foam wedge to keep it from moving too much.
I haven't done any speed tests. It runs Safari and doesn't feel any slower. Waking from sleep should be a lot quicker.
The nicest thing is the Pismo is now silent.
There are bigger and faster CF cards, but they cost a lot more.I have been wanting to try this for a while, but not on my Pismo, Lombard or Wallstreet which all run OSX but on my older 3400 or 1400.
Would they work running OS8 or 9 on the CF card ?
Stewie -
[request ]Missing modes and others for emacs
Hello.
I finally found some stuff (mainly modes) that can be interesting for emacs users and aren't available al arhlinux packages. Here is a list in hope someone makes a PKGBUILD of them and maintains it.
Of course I'm not going to use all them, but could be useful for others.
http://www.mahalito.net/~harley/elisp/crontab-mode.el
http://www.mahalito.net/~harley/elisp/syslog-mode.el
The author has other stuff at here
http://www.emacswiki.org/emacs/AntMode
http://www.ccs.neu.edu/home/guttman/undoc.el
http://sourceforge.net/projects/post-mode
http://www.emacswiki.org/emacs/imdb-adds-mode.el/
http://www.emacswiki.org/emacs/Htmlize
http://pagesperso-systeme.lip6.fr/Chris … oldingo.el
http://rtfm.etla.org/emacs/htmlfontify/
http://www.emacswiki.org/emacs/FlashCard
http://kanis.fr/hg/lisp/misc/anki.el
http://www.emacswiki.org/emacs/imdb.el
Another irc client yor emacs: http://www.nongnu.org/circe/
http://www.emacswiki.org/emacs/LaterDo
http://www.emacswiki.org/emacs/SCPaste
Be open to give suggestions or better alternatives if those exist.
Regards
Last edited by timofonic (2009-07-21 08:38:36)i deleted the folder and did a pacman -Sy again. And then did a pacman -S qt and results in
qt: not found in sync db
I use the Server = ftp://ftp.archlinux.org/current/os/i686 for my updates
Do you see the package after you sync?
****I changed the Server to one of the European mirrors. I found it there. I guess qt is not available on the ftp://ftp.archlinux.org/current/os/i686 server ****** -
Oops, was a bit premature with the questions.
1 Basically I want to be able to attach a picture to my email. I know I can email from my pictures but it is hard to keep track of those emails.
2 how can I get to my folders. I know they are there when I sort my emails into folders, but say I want to get into one of the folders, eg sent. How ?
Thanks, Arie.If you start in the photos app and select the photo(s) to email, then that email should go into your Sent folder on your email account, so you should be able to keep track of them from there.
To get to your other email folders just tap your account id at the top left of your Inbox (it will be Mailboxes if you've only one account set up on the iPad) and that should take you to a list of your folders, and just tap the one that you want to go into. If you have more than one account active on the iPad you will have a Mailboxes button at the top of the list of folders that allows you to go up another level so that you can select a different account and then folder
Maybe you are looking for
-
Solaris Management Console Server Problems
When I try to run Solaris Management Console, I get an error saying that the server is not running on port 898. I have followed the instructions on hte FAQ. I see no instances of smcboot running in the processes. When I run /etc/init.d/init.wbem star
-
Hello, Any FM to extract Quarter from Date. i.e the Date falls under which Quarter. Thanks Sandeep
-
Different releases of oracle 10g and 9i
Hi, what is the difference between oracle 10g release 1 (10.1 ) and 10g release 2 (10.2)? : difference in instalaion steps only ,will be fine i need to install silently both the releases in AIX 6.1.... Also please tell me the same for different relea
-
I was hoping that with iOS5 Apple is also updating the remaining Youtube App - but NO - the problem: Videos are shown in extremely bad resolution when you are logged in a 3G Network - when you are logged in via wifi then the quality of the same video
-
How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.
How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall. <b>Procedure:</b> Run regedit - 1. Go to HKEY_LOCAL_MACHINE\Software and delete iPlanet folder, 2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services de