32DT1U Flat Screen No Picture but sound

Picture will come on for about 2 seconds then screen goes black.  There is sound...no picture.
Green LED light is lit solid.  Turn it off or unplug...restart....Brief Picture ...black screen..sound only.

My Regza 37hl67, when powering up would blink the picture and then the screen goes black.  The sound was fine.  It's 6 years old, hanging on the wall and can be moved and tilted.  This started 2 years ago, then went away, I don't know why.  Now it started again yesterday, but finally came on after about 5 power down/up.  Today blink the picture and then black.  I went on the website and found a thread about a larger regza getting lines and finally shutting the picture down.  One of the speculations was the panel was too heavy for the frame, and their solution was to adjust the frame.  Then I noticed my tv was tilted down. I tilted it up, wiggled the frame a little and turned it on.  Voila, picture came on and stayed on.  Wierd fix.

Similar Messages

  • HT201335 What causes the TV screen to freeze but sound continue on TV when using Air Play from I Phone?

    What causes TV screen to freeze but sound continue on TV when using Air Play from I Phone 4?

    First try rebooting ATV and router. Beyond that, it's probably something within the network, typically interference.
    To get a report of the network go to istumbler (Mac) or netstumbler (PC). Look for signal strength and noise.
    If on wifi try ethernet.

  • Up until 6 hours ago I was able to play youtube videos now I cant in firefox I have no problem playing them in google chrome or IE .But if I am in firefox all I get is a black screen no picture ,no sound, no bar at the bottom. Need suggestion

    I am not able to play youtube videos. No picture no sound

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • IPad air2 suddenly freezes and the screen goes black, but sound continuesI have restored to factory setting and it was OK for a while yesterday it froze again. Anyone else got this problem

    IiPad air2 suddenly freezes, the screen goes black but the sound is still on, I have taken it back to factory settings and it was OK then yesterday it froze again, only plugging it into my IMac got it going again. Anyone else got this problem?

    Greetings jupiejupie,
    Welcome to the Apple Support Communities!
    I understand that your iPad is sporadically becoming unresponsive and the screen is turning black. In this situation, I would recommend reading over and working through the suggested steps in the attached article. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Joe

  • [Solved] GS60 - Windows 8 - Screen Goes Blank But Sound Continues

    Typically about 1-2 seconds after the windows signup screen, the screen goes blank but you can still hear beeps of the pc loading. Then, only sometimes, white lines flash horizontally across the screen.  My only choice at this point is to do a hard shutdown. The "MSI" logo pops up on reboot and process continues. Eventually (like after 5-10 mins. and several restarts/shutdowns from the windows login screen), the screen will work again. The screen will continue working for hours uninterrupted but may encounter the same issue. Then, it takes 5-10 mins to get the screen operational again!
    Bios is latest version .106

    Hey lbman14,
    Try updating your VBIOS if yours are not 80.04.EF.00.21, and use the latest graphics driver from MSI website first.
    VBIOS: http://dl.msi.com/download_files/frm_exe/N15E-GT_80.04.EF.00.21.zip
    Update Guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
    NV 332.38:http://download.msi.com/nb_drivers/vga/vga_nvidia_332.38_0x2bb10911_w818764.zip

  • YouView no picture but sound

    Hi,
    I'm new to this forum so I'm sorry if this is a repeat.
    Got back off hols today to find the YouView box would not start and gave me the 'Nearly Ready' for ages. After rebooting (off ad on) going through the Maintenance menu and Internet / USB Update Keep recordings, it worked for a while.
    Later on in the morning we got the first instance of sound, but no picture after about 30 - 45 mins of watching a programme. This time after rebooting we tried the Factory Reset Keep Programmes and once again it worked for a while.
    This afternoon it worked for probably over an hour, and then again stopped with sound but no picture. We have once again rebooted the box and now have the 'Nearly ready' again. 
    What do we try next?

    Hi
    MY first post also.
    I think I have the same problem as you...after a while (has been as short as 5 minutes or over an hour) for the last few days the picture disappears and I only get sound. After a little while longer the whole box freezes. Switching it off/on then turning it on doesn't seem to fix it immediately (it fails to boot, maybe a purple screen). It seems I need to leave it for a while so I'm wondering if something is overheating?
    Whatever the problem I suspect it is a hardware fault thereofre the box will need replacing!

  • No picture but sound is there when try to watch anything on web

    Just recently start experiencing problems with video content on my Mac Mini. When I try to watch certain videos or video clips on web, screen ( window) turns black or green, sound is there but no picture. Most clips on You tube I have no problem at all but, for example, when I tried to watch new iPad tutorial movie on Apple site sound is there but window is black. Tried all tricks with Quick Time Player, have updated Flip4Mac WMV plug in still nothing. What I do wrong?

    Hello! Not 100 percent sure, however this is what I would do first. google flash uninstaller and then download the program to uninstall flash, then reinstall it. Also do an apple software update and make sure there is not anything that needs updating. See if you can't 'reset' your settings in quicktime to default. The flash thing I would try first however as its a big culprit...

  • Streaming iCloud movie from iPad to Apple TV via AirPlay resulted no picture but sound.

    I notice that movie (iTunes purchased) that store in my iPad 2 when AirPlay to Apple TV 3 everything fine but for iCloud movie streaming (iTunes purchased that store in iCloud), I only manage to get sound from Apple TV 3, no picture. Apple TV only displayed running time. This happen after Apple TV new updates few days ago. Before update, everything is fine.
    I used iPad 2 to stream iCloud movies to Apple TV because the streaming is much faster than using Apple TV 3 own streaming which some times the buffer took quite some times to load.
    And why on my iPad 2 which still running iOS 5.1.1 the AirPlay icon missing the Mirroring on/off icon. In AirPlay I can only choose iPad or Apple TV but without the Mirroring on/off icon.
    If I AirPlay iTunes purchases movies (iCloud Streaming) to Apple TV, my Pioneer AV amp decode Dolby Digital 5.1 but if I connect using Apple Digital AV Adapter via HDMI into Pioneer AV amp, I only manage to get PCM Stereo track.
    If the iTunes purchases movies have been downloaded and store on my iPad 2, then either AirPlay or using Apple Digital AV Adapter via HDMI, my Pioneer AV decode Dolby Digital 5.1
    I planning to purchase Mac Mini for storage iTunes purchases movies and listening music plus some PC users. Should I ditch Apple TV or should I use both ?

    That app has not been enabled for airplay, it is up to the developer to do so

  • My i pad 2 screen is black but sound is working what is the solution?

    screen of my i pad 2 is black , i tried restart , then reset , then restoring , now there is sound but still the screen is black what is the solution ?

    There is no user interface at all? Not a single graphic or color, just a black screen?!

  • Apple TV2 streaming via Airplay. No picture, but sound

    Internet ok, Youtube ok, but streaming from iPad 2 via Airplay to TV 2 is only sound, no picture

    Welcome to the Apple Community.
    What are you trying to stream via AirPlay, websites and apps need enabling by the developer, not all are. Some simply haven't got around to it and others don't want to (often for licensing reasons I assume)

  • HT1551 Screen goes black but sound continues when watching netflix on apple tv

    Screen goes black intermittently when watching Netflix , sound remains. Broadband is strong , not sure what problem is

    That will usually indicate a network issue. First try rebooting ATV and router.
    Make sure DNS is set to automatic (settings - general - network). If on wifi try ethernet. Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise.

  • No picture, but sound during commercial

    Recently, our TV goes black during some commercials, but the sound is still on.  I thought it was our HD set top box, but it is happening on another box that isn't HD.  Is anyone else having these issues?  It happens ONLY during some commercials.  

    we have been having the same issue. it seems to be only certian channels. i was going to call verizion tomarrow. never figured i would be complaining about commercials before

  • HT4993 my scrren is black but sound is coming out and holding down the lock button and home button doesnt work

    I have a Iphone 4s and it is currently updated to the newest software which i believe is IOS7.2 and the screen is black but sound comes out, but it sounds like my vloume is halfway turned up. i can recieve calls and send out calls, i just cant see through the screen. And i tried charging it and i tried pressing down the lock button and the home button, but still nothing seems to work.

    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591

  • I purchased the digital av adapter so that I can plug my iphone4s to my flat screen. It does mirror to the TV but the picture is red/pink. How can I fix it?

    I purchased the digital av adapter so that I can plug my iphone4s to my flat screen. It does mirror to the TV but the picture is red/pink. How can I fix it?

    Are you using the YRW composite connectors on the TV or the RGB composite connectors? - the cable will only work with YRW and the correct input choice on the TV - if you are connecting correctly then I am sorry I don't have any other suggestions

  • I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound.  great picture.  Help?

    I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound.  great picture.  Help?

    Mac computers: Frequently asked questions about using ...

Maybe you are looking for

  • Why is it no longer possible to make the download window close automatically after downloading is finished ?

    Only two days ago the download window closed after downloading. What happened ? And why is there a new and less efficient download window ?

  • Operation SubContracting

    Hi Folks,    We use Operation Subcontracting ( sending A & getting A back with some marking / coating ect ) PO (doc typ POIN ) without item cat L but with A/c assignement cat F against prod ord  followed by MIGO -->103 , 104 if scrapping , 105 to rec

  • Info Record update indicator on PO

    Hello All The InfoUpdate check box on the Material Data tab of a PO, gets checked automatically. How do we control this? Is this driven by a vendor, material or plant or anything else. Do we set this up some where in customizing. Also, if the infoupd

  • TS1398 My iPod touch won't connect to the wifi.?

    So my iPod touch has been conecting to the internet perfectly these last few weeks, but i turned it on this morning and it would not connect to my home wifi at all. It connects to other wifi signals, and i can connect my laptop to my home wifi, but n

  • Exchange failover DR testing

    Hey guys, i have a problem wih my Exchange testing Exchange configuration: 3 Sites 2 Hub cas servers in Site1 2 Mailbox (DAG) in Site1 1 Mailbox+CAS (also in same DAG) in HotSite 1 Witness Server in Site3 1 Database mounted in Hotsite with a test cli