32DT2U1 will not turn on after reset.

 My TV all of a sudden will not turn on. I have done the reset and it did not help. I am wondering if maybe it needs a Firmware update and can that be done with the TV off? As stated in the subject line, the model No. is 32DT2U1. Thanks

Unfortunately, I don't think that's possible. I'd recommend calling customer support.
- Peter

Similar Messages

  • Phone will not turn on after resetting

    my phone was acting up, not responsive. i reset by holding down sleep and home button together until apple symbol appears. after letting go and apple symbol is up for a few seconds, it goes back to black screen and will not turn back on. help!!!
    Message was edited by: Ricah

    Start with your computer open to iTunes and the USB cable plugged into the computer but not to the iPhone. Hold down the Home button on the iPhone as you connect the USB cable to the iPhone. Continue holding down the Home button until both screens acknowledge the connection, then release.
    This will allow you to restore the iPhone, which is unfortunately likely needed.
    The process may take 30 minutes, so have time.
    Good luck

  • Phone will not turn on after erasing settings

    Iphone will not turn on after erasing the settings

    1. Charge with the AC adapotor for at least 30 minutes.
    2. Reset the phone: press both the home and power buttons for up t0 1 minutes, releasing when the Apple logo appears

  • My iPad4 will not turn on after i OS 6 update

    My iPad4 will not turn on after i OS 6 update and it keep asking to connect to iTunes?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • TS3274 My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?

    My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?

    Hi Dawg70,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • My iphone 5 will not turn on after i switched it off.

    my iphone 5 will not turn on after i switched it off. i have tried resetting and putting it into recovery mode but it will not respond to anything. i have also left it on charge for 24 hours and tried again but no response, help!

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My iphone will not turn on after I replaced the battery

    My iphone will not turn on after I replaced the battery, itunes logo comes up, but it will not connect and does not reset! does anyone know what I can do?

    Who replaced the battery, you, Apple or an Authorized Apple Service Provider? If you did it yourself, then you could have done anything to disable it. It also voids any warranty and post-warranty support from Apple and the forum. You are on your own. If Apple or an Authorized Apple Service Provider replaced it, then take it back and have them check it.
    The iPhone does not have a user replaceable battery, or user serviceable parts. It is meant to only be serviced by Apple, or authorized service providers.

  • My iPhone will not turn on after a yet another blue screen of death. Please help!

    As mentioned above, my phone will not turn on after a yet another blue screen of death. All of a sudden it turned off, and it wouldn't turn on for quite some time, even after I plugged it in the charger. It wasn't long after the screen turned on, but it only displayed a bright black. I decided to turn it on and off a few times. Nothing worked.
    I have also tried to call the phone from another one. It was as if the phone was simply off.

    Hello ZarinaUrum,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPhone.
    iOS: Not responding or does not turn on
    http://support.apple.com/en-us/TS3281
    Cheers,
    Allen

  • Light will not turn off after installing new cyano cartridge

    Light will not turn off after new cyano cartridge installed

    I suspect that the ones that say they will work with Windows 8 on the box.  If it does not say that, check the maunfacturer's website.  They eventually will have to give Windows 8 support for the new cards or loose out to the competitors cards.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Iphone 3gs will not turn on after attempting a factory restore

    My iphone 3gs will not turn on after attempting a factory restore, all that happens is the apple logo appears the timer goes round then stops.  It then switches itself on and off several times to no avail.
    The only way I can turn it off now is by holding the off button and the home button, but then it goes into the cycle again.
    Any advice gretly appreciated.

    http://support.apple.com/kb/HT1808

  • HT4623 Help my iPhone will not turn on after trying to update

    After looking at my phone and realising that it had an update I decided to update... It was norton charge or plugged in and now will not turn on? Tried plugging it in but has been on charge for about an hour now and it's still not turning on? Pls help... Tried the home button and the on/off button together but still no joy

    neilied wrote:
    It was norton charge or plugged in
    Sorry... What does this mean. ?
    neilied wrote:
    Tried plugging it in but has been on charge for about an hour now and it's still not turning on?
    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...

  • IPhone 4 will not turn on, hard reset does not work.

    walked home today, slight rain, headphones in. did it a thousand times no problems. half an hour after getting home i check my phone and it doesnt turn on. liquid contact indicators are untouched, hard reset will not turn the phone on. in addition plugging my phone in has no effect.
    is there a fix for this? does anyone know what i can do.

    i just experienced an odd problem. Last night, i turned OFF my iphone before going to sleep (as i do every night, and i would turn it back on when i wake up). This morning, i tried turning on my iphone and nothing happened! i tried charging it (using several different chargers btw) and it wouldnt turn on at all.
    But after looking at this forum, i did a hard reset and it was finally able to turn on again.
    Does anyone know what this problem might be? Even though i got it working already, i'd like to know what might be the cause of it so i can avoid this issue in the future.

  • My new iPhone 5s will not turn on after inserting the SIM card. Help?

    I bought my new iPhone 5s from US Cellular and attached it said to insert the SIM card before activation. So I shut the phone off, insert he the SIM, and now it wont turn on. Any help? I have to activate it today and don't want anything to delay it.

    Hi connorfromgrinnell,
    Welcome to the Apple Support Communities!
    I know it has to be frustrating wanting to use your iPhone but cannot turn it on. In this situation I would recommend the steps listed in the attached article.
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Have a great day,
    Joe

  • My iPad Minnie will not turn on after soft boot

    My iPad Minnie will not turn on even after I did a soft reboot

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy...
    1: Connect the device to Your computer and open iTunes.
    2: If the Device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • 1st generation ipod touch will not turn on after being charged

    1st generation ipod touch got a white screen and then after that when charged it will not turn on. Does anybody know what happened or how I can fix it.

    That symptom is one of those covered here:
    iPod touch: Hardware troubleshooting

Maybe you are looking for

  • Screen level validation on xk01 with holding tax screen .

    Hi, Can someone suggest a suitable way by which I can do screen level validation on xk01 screen 610,so that in case of user not giving proper inputas the concerned field is open for user input . Right now I am using an exit but it is triggered afete

  • Reassigning Datasource to a new planning area

    Hi, Currently we have a datasource in a planning area. However this planning area was not as per the naming conventions and hence a new planning area had to be created. No we need to reassign the datasource to this new planning area. Is there any way

  • Dynamic table driven menus

    Using jsf/adf bc I've been studying the 'dynamic' menu setup in the srdemo and have a decent understanding of how that works in a declarative way. However, that example assumes the menu items and their properties will be 'hard coded' into the faces-c

  • Problème pour activer photoshop cc et lightroom 5 - Abonnement CC pour la photo

    Bonjour, Je me suis abonné à Creative Cloud pour la photo incluant Photoshop CC et Photoshop Lightroom 5, j'ai bien tout installé mais il m'est impossible d'activer les logiciels. On me demande un N° de série, j'ai suivi toutes les démarches de l'aid

  • New service - Email alerts for critical BC incidents

    Hi, We've just set up a new service that can be used to receive email alerts during BC incidents(at the start & finish of the outage). To subscribe you need to go to our system status page (http://status.businesscatalyst.com/) and on the right hand s