32GB SDHC card doesn't work on CAMILEO H20

Can anyone help?
I recently purchased the above camcorder. I also purchased a 32GB class 6 SDHC memory card separately.
The card seems to work fine on my PC as a memory device.
However, I cannot get it to work on the camcorder.
I have formatted the card both on the PC and the camcorder but still doesn't work.
When formatted on the camcorder it won't be recognised by it(It says FULL MEMORY) and when formated by PC it can record some footage for a few seconds and then stop without saving the footage.
However i manage to take some photos(only when i formated on the PC) but they won't be recognised by the camcorder (It shows a folder with a ! on it) and i don't see them at all on the PC!!!
I also tried another SD CARD 256MB but it's still the same problem
I would welcome any suggestions or comments!
Thank you

Hello cygamer,
this sounds really strange. I have also a Camileo H20 and I use it with a 32GB SDHC card.
I am able to record movies with a 32GB SDHC (Class6) - 9:01 h - Full HD (1080p) / 18:03 h HD (720p).
Also I can make pictures with the 32GB SDHC (Class6) - 10.571 pcs. - High (8mp) / 14.415 pcs. - Standard (5mp) / 26.428 pcs. - Low quality (3mp).
So it seems the issue depends not on the Camileo.
Try to insert the sd card locked and after this insert it unlocked.
Please load the battery full and than try to format the card inside the camera again.
Another point you can do is to format the internal memory and to set the camera to default settings.
greets

Similar Messages

  • 32GB SDHC Cards For 5800 XM

    Hi there A number of discussions in the past have concentrated on the compatibility of 32GB SDHC cards with the Nokia 5800 XM (and other units), but no answers were given at that time because it was stated that no 32GB cards were available yet. Looking on Amazon, for example, I can now see that there are many 32GB SDHC cards available and one (a class 6 from the Transcend company that has around 200 favourable reviews) is described as "Compatible with all SDHC-labeled host devices (not compatible with standard SD)" and further states that "You can store your entire music or picture collections, video clips, or even complete full-length high quality movies." Does this mean that this card will work in my 5800 XM? Has anybody tried using one of these cards and, if so, what happened? Any advice or feedback will be gratefully received. Many thanks Simon.
    Solved!
    Go to Solution.

    Hi, I'm using the 16GB at it works just like a normal card. the 32GB will be in the market soon. Please don't forget  their are 2 types.Normal and MICRO and the one for phone is mcro lis this ( 
    SanDisk microSDHC 16GB). You need to wait a bit longer for a 32GB.
    32GB here
    Black N-97 V.22.0.110 CV.22.0.110.238.04 -Rm-505Code : 0586701Direct from NOKIA warehouse.
    NOKIA - no more LEMON N97.!! ( Android) is Plan for JAN2011

  • SDHC card does nor work on Satellite A200-1J0 with a clean Vista install

    Greetings,
    When I bought this notebook there was preinstalled Vista 32bit and as usual some Toshiba's drivers and software. As I remeber there was no problems with built in memory card reader, it was reading regular SD cards and also SDHC.
    One day I had to reinstall operating system (without using recovery disc) and i've downloaded drivers for my notebook from official site, installed them and the card reader now it's not able to read SDHC cards. Is it just me?
    This is what I installed for reader:
    -Toshiba Value Added Package where is TOSHIBA Flash Cards inside of it
    -Flashmedia Driver
    -SD Utilities
    I just want to highlight that there's no problem with reading mmc or normal sd cards.
    My sdhc card is 100% working properly with other card readers.
    Another sdhc card that I have is not working, it's just like I put nothing inside the reader.
    Just nothing happens.
    Is there anything else that I missed and this is the reason of my problem?
    Any fix for Vista or something like that?

    Dear Jeffrey,
    My problem is solved, thank you so much! :)
    This words were very helpful:
    "Mostly an installation instruction is placed on the Toshiba European driver page which contains the essential installation order."
    So I went on that site and found file where was written:
    Contents and Installation order
    for Windows Vista
    INSTALL ORDER
    WINDOWS VISTA
    No. Component Name Version
    1 Windows Vista RTM
    2 Intel ICH7M Chipset Utility native
    3 Intel 945GM Display Driver
    or
    3 nVIDIA G72MV-A3/NB7P-GS Display Driver
    4 Realtek ALC861D Audio Driver
    5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
    6 Synaptics Touch Pad Driver (with LuxPad)
    7 ALPS Touch Pad Driver
    8 TI Multiple Digital Media Card Reader
    9 TOSHIBA Software Modem
    10 Intel Golan Wireless LAN Driver
    11 Intel Kedron Wireless LAN Driver
    12 Atheros Wireless LAN Driver
    13 Chicony Camera Software
    14 Bluetooth Stack for Windows by Toshiba
    15 Bluetooth Monitor
    16 TOSHIBA Value Added Package
    17 TOSHIBA Flash Cards Support Utility
    18 TOSHIBA Hardware Setup Utility
    19 TOSHIBA Supervisor Password
    20 TOSHIBA SD Memory Utilities
    21 TOSHIBA ConfigFree
    22 TOSHIBA Assist
    23 TOSHIBA Speech System
    24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    25 TOSHIBA Fingerprint Utility V5.6.0.3221
    Thanks to that file I've found that I haven't installed "TI Multiple Digital Media Card Reader". In toshiba european download site there's nothing like that so nothing weird that I didn't find that before. Here google became a good companion and helped me to find that file. I just simply installed it without deinstaling previously installed drivers (just like is NOT written in install order above) and it's working :)
    Thank you once again!
    Best regards,
    Davit

  • Nikon D800 raw files taken with Sandisk extreme plus 32GB SDHC card got corrupted. Able to preview them in Lightroom4.4 Library, but not able to import or transfer the files from card to computer. Any ideas on how to save images from Library Window in Lig

    Hi, I have shot few pictures on 31st December night in RAW mode using Nikon D800 and Sandisk extreme plus 32GB SDHC card. It looks like card got some memory errors so not able to transfer the files from Card to computer. However I am able to view the pics thru Lightroom ver 4.4 Library, but when I tried to import them, it gives me an error stating that file can't be read.
    Is there a way to save the pics from Library window in lightroom overcoming the card read errors ?
    Thanks in advance

    Hi SSPRENGEL,
    Thank you for your response. Here is the error message I am receiving, I tried with various destination folders in the computer but it still gives the same error:. Just to let you know, I am able to import pictures into these folders from other memory cards.
    I am able to finally at least extract the jpgs using the option suggested by elie-d

  • P20-552: 2GB SD card doesn't work.

    I have a P20-552 (PSP26E-025E9-S4) which is about 18 months old. I recently bought a Canon digital camera (IxUS 750) with a 2GB Sandisk Ultra II SD card and the combination is working well. Although I can transfer images from the camera to my Toshiba portable using an USB cable, sometimes I would like to use the SD slot on the portable but there seems to be a problem: seconds after pressing home the SD card in the slot I get the message "Disk is not formatted - Do you want to format it now?". I reply OK but then I get the message "The disk in drive E cannot be formatted"
    The card continues to work perfectly well in both my camera and in my iPaq PocketPC. The SD card slot in the Toshiba will work quite happily with the Sandisk 256MB SD card that is usually in my PDA.
    Anybody has any idea why the 2GB card doesn't work in the Toshiba? Is it a question of updating a driver - I did look the other day but I couldn't find anything that to me seemed appropriate but I might well have overlooked something..
    I am running XP Home (SP2) and have fully automatic updates ON. I have Norton Virus and Zone Alarm running and am not experiencing any problems with any other software/applications - at least, no problem since someone suggested vacuuming my overheating laptop a few weeks ago ;-)
    Thanks, Brian.

    It seems that the unit doesnt support this card.
    Check your user manual. There you will find a information that this unit supports only the following SD card sizes: 8/16/32/64/128/256 and 512 MB
    According to this document the 2 GB are to high.

  • Ethernet card doesn't work with new arch install?

    Hi guys,
    so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
    After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part)  and i used that when i cold/rebooted.
    But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
    I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e).  I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now  lspci -vnn | grep -i -A 10 net reports
    00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
    Subsystem: Dell Device 0238
    Flags: bus master, fast devsel, latency 0, IRQ 42
    Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
    Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
    I/0 ports at ff00 [size=32]
    Capabilities: [c8] Power Management version 2
    Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [e0] Vendor Specific Information: Len=06 <?>
    Kernel driver in use: e1000e
    Kernel modules: e1000e
    ip a reports:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
    4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
    inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
    valid_lft forever preferred_lft forever
    inet6 fe80::6666:b3ff:fe16:9210/64 scope link
    valid_lft forever preferred_lft forever
    lsmod | grep e1000e
    e1000e 215644 0
    ptp 17692 1 e1000e
    any help on what to do next would be greatly appreciated.
    Last edited by mvheart/dev/null (2014-08-18 04:02:12)

    Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
    [aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
    [sudo] password for aaron:
    Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
    [aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
    ● [email protected] - dhcpcd on enp0s25
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
    Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
    Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
    Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
    Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
    Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
    Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
    Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
    Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
    Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
    Last edited by mvheart/dev/null (2014-08-18 15:50:10)

  • My Card doesn't work anymore and keeps asking me for the card information. How do I turn the card option back to "none".

    How do I turn this off? I can't download anything until I put in the card's information. But the card doesn't work anymore, it ran out of money. It keeps saying that my last perchase was unseccessful or something. I just want this to stop so I can update and download apps! Please help!

    My iMac with Snow Leopard 10.6.8 crahed b/c the HD cannot be repaired. I reinstalled Mac OS X and luckily have most documents and applications. I have moved them all into folders before I erase the HD. I had all my documents but lost the 3 applications for iWorks. It says go to the store, buy and enter your serial#. That is not working. Here it is:MB966Z/A
    WVL 001299               10959191-000
    I need the updates. Apple has my sign in Apple ID.
    Thanks,
    pandaposyus

  • What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

    What do you do went your iTunes redeem card doesn't work ?, What do you do went your iTunes redeem card doesn't work ?

    Welcome to the Apple Community.
    The following article(s) may help you.
    iTunes Card and Gift Certificate FAQ     

  • Why my nano cut sim card doesn't work on iphone 5c?

    why my nano cut sim card doesn't work on iphone 5c?

    Cut cards often don't work. Get a real nano SIM from your cell carrier.
    Regards.

  • T430s SDHC card reader not working

    Hi, I recently bought a T430s and when I tried to insert a SD card it did not show up in my computer. I've tried 3 different SD cards the sizes are16 gb, 32 gb and 2 gb and neither of them shows up, to make sure the problem is not in the SD card I tried using the SD cards in 2 cameras and 2 other laptops. In all those devices the cards works.
    I have tried installing these drivers from this thread https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T430s-4-in-1-express-card-SD-reader-mi... but it did not work.
    I also tried following the instructions in this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca... but that did not help either.
    According to the device manager the Ricoh PCIe SDXC/MMC Host Controller is working correctly. The Ricoh SD Disk Device is also working correctly.
    Whenever I insert the SD card the Sound for a new device plays and when i remove the SD card the removal sound plays. How can I fix this? I'm going away for 7 weeks with my laptop so I need to fix it ASAP and I dont have time to send the laptop to Lenovo.
    EDIT:
    I uninstalled Ricoh Media driver and now 1 of the cards show up but Windows complains about that it needs to be formatted, but the size is 0 so that doesn't work either. Tried installing the driver again and now they show up in the device manager again and proudly says that they are working but the SD card still doesn't show up so I can read the files on it.
    EDIT 2:
    If I go into the device manager and forcibly update the the Ricoh SD Disk Device then it says:
    Disc: Disc 1
    Type: Removable
    Status: Online
    Partitiontype: MBR (Master Boot Record)
    Capacity: 15807 MB
    Non-allocated space: 0 MB
    Allocated space: 0 MB
    For the 32 gb SD card everything is the same but instead it says "Capacity: 30828 MB".
    EDIT 3:
    When the SD card is inserted a storage device pops up in the device manager. The name of the device is just "Unknown device" and the status is that it can't find any installed drivers for the device.

    I'm experiencing a similar situation with my 1-year old T430s. The built-in card reader was working fine until recently when it stopped working.
    Now the built-in SD card reader doesn't recognize SD cards that are recognized in external USB adapters.
    Device Manager shows Ricoh PCIe SDXC/MMC Controller when an SD card is inserted into the card reader but neither Windows Computer Management/Disk Management nor Windows Explorer show the drive. Device Manager indicates that the driver is up-to-date (v6.10.10.32 25May11.)
    When I put the same SD cards into an external USB adapter they're recognized by Windows, assigned a drive letter and visible to Windows Explorer as well as other applications.
    Do I have a defective card reader? 
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • ICloud is messing with my phone and now iStore says my card doesn't work.

    Okay. Where do I begin. I feel like a crazy person, Anyway.
    So all of this started when I got my MacBook Pro. I had just got a new e-mail so of course I want to update my iCloud account with the new e-mail and a new password. Seems easy enough but NO, it's been a nightmare.
    1. I can't update, delete or do anything with the iCloud setting in my phone, which is still registered to the old e-mail. It keeps asking for the old password and it does not make sense because it has been disabled. Help me god.
    2. I can't update or do anything in the App/iTunes Store because it keeps asking for verification, which leads to my card info (was already saved) but now all I get is it has either been declined or is not a valid payment option etc etc etc.
    3. Same thing as number 2 happened on my iTunes Store on my macbook.
    And that's it. My phone is having a meltdown because he's stuck in some sort of non-existant iCloud account twilight zone. I've tried everything and nothing seems to work, I get nothing from the apple support (thanks Apple! Great customer care by the way!) and no one around me seems to know what to do or what the deal is.
    I'm just a simple human being that gets very frustrated when technology doesn't work.
    So if anyone out there is really smart and can figure this out and tell me step by step what to do before I set my phone on fire, please help me!
    I'd really appreciate it. Thanks!

    Does your phone charge without issues when using the Apple supplied charger?
    If it does, the issue is with the Mophie.
    If it does not, the issue may be with the iPhone or may simply be a dirty dock connector.

  • Satellite 1900-803: Hi-Speed USB 2.0 card doesn't work

    i have a satellite 1900-803 laptop. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card but it doesn't work. the card's manual says that after successful installation i should see a second "universal serial bus controllers" heading which i didn't. i even had it replaced it with another one thinking that there might be some problems with the drivers, but it still doesn't work. everytime i plug in a device such as an mp3 player, a digital camera or a usb storage device, windows just suddenly locks itself up, the cursor won't move, the ctrl-alt-del function doesn't work, and the worst of all, i can't turn off the machine!
    the card says that it runs on any 32-bit slot.
    i've browsed the user's manual and the device manager to see if mine is a 32-bit one, but i can't really find it. is this probably the reason why it won't work? or is there any other reason for it not working? if this is the reason, is there a way where i can upgrade my laptop's pc card slot to make it work?
    please help.
    i've posted this question yesterday morning and haven't got a single reply. is it because it has got to do with an older laptop? please, anybody, help..........
    Message was edited by: wes0702

    Hi
    Did you check the Bios? I assume the Toshiba Bios was preinstalled on your notebook. Am I right? There should be an option for changing the PC card controller mode.
    There you can change the controller mode to auto-selected, PCIC compatible or Card bus/16-bit.
    If the card supports 32 bit so you shouldnt use the 16bit option.
    I think you should play a little bit with this option and possibly the card will work.

  • KA780G second network card doesn't work

    Hi everybody,
    Today, I put an second network card on the KA780G board (it's for a round robin network), on a free PCI slot, and this card isn't recognised by Linux and Windows  (in Windows XP, when the network card is connected, my graphical card works bad as well).
    I tested this network card in another computer and it's working well, I try with another type of network card and it's not working.
    I upgraded the BIOS with the latest release and reset the bios parameters but it doesn't work. 
    Do I need to put some specifics parameters in the BIOS ?
    Someone as an idea ? 
    Thanks
    Matt

    As you want... but I know the truth 
    Transfert a file takes me twice the time when the second network card was unpluged (the test was made with two differents files with the same size, this is for keeping disk caching speeding the transfert).
    I think, your're not understanding, so let me explain the achitecture of my network : two computers pluged to my "super magic switch" (each with one network card) and my NAS with two round robin's network card.
    I transfert one file from the NAS to the first computer and at the same time another file from the NAS to the second computer. The network speed was (on the NAS) about 24MB/s (see with the system monitor).
    If you're right explain me why many people using port trunking with their switches ?
    Matt.

  • IPhone 5 sim card doesn't work

    Hi,
    One day the SIM card in IPhone 5 just stopped working. I can see the network on the desktop and in general settings, but it does not work for real. I can't make a call, send a message or get internet. Sometimes it goes "No service", "Searching" but then goes back.
    I have checked this SIM card with different phone - it works properly good. Any different SIM card in my IPhone also doesn't work.
    So I went to the Apple Store (Indonesia, Denpasar, Bali) they said you need to reset all the content and settings. So I did all and nothing happened.
    Again SIM doesn't work - same situation. What is interesting sometimes I'm getting messages from the network so it seems that SIM card works some time but I can not make any calls or actions with SIM.
    In the App Store guys told me this might be a hardware problem which could not be solved it's just broken.
    They say you can exchange an IPhone for the new one but not in Bali because they don't have IPhone 5 anymore. Is it fair?
    Please help me what can I do and how can I make my IPhone works or exchanged it for a new one.
    I will be in Malaysia, Kuala Lumpur on February 7th. Can I exchange my IPhone here?
    Version 7.1.1 (11D201)
    was bought in USA 2,5 years ago
    I live in Bali, Indonesia
    Thank you in advance for any help.
    Best regards,
    Yulia

    Thank you. I bought IPhone in USA 2 years ago.
    "The iPhone warranty is not international" - it's very sad. Just wondering why people in the Store told me different things.

  • Satellite M40-129: PCMCIA Card doesn't work with Linux

    I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
    Any idea why it doesn't work with my M40-129 ?

    Hi
    Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
    http://newsletter.toshiba-tro.de/main/
    You should check the OS machine compatibility and the other areas.
    Im sure you will find many useful tips.
    Good luck

Maybe you are looking for

  • Can't turn off zoom

    I was trying to dim the screen and accidentally double-clicked on Display in System Preferences. It instantly put the screen into Zoom. I have tried to turn it off using keyboard shortcuts (Command Option 8) and also in Universal Access, but it won't

  • The old version of firefox had print preview option - how can i do this in the latest firefox update?

    My old version of firefox had a little red firefox tab (top, left) with a pulldown menu offering print option, then a secondary menu offering print preview option. How can I access the print preview function in the latest version of firefox?

  • From Value in Tasks Tab in UWL

    Hi All, We are using UWL for approving of requests in MSS. Currently employees initiates a form and submits for the approval. Request comes and sits in the UWL. Now in the UWL Tasks tab From Column is filled with Intiator of the form. I want to know

  • Custom transformation does not run against Logical Model

    Here is the screen [http://img849.imageshack.us/img849/7411/20110530174314002.jpg|http://img849.imageshack.us/img849/7411/20110530174314002.jpg] Besides setting the object=logical, the script ran against the relational model. To prove this, have a sc

  • List of Deleted Personnel Numbers

    Hi, How to get a list of all DELETED Personnel Numbers for a selected period? I await your quick reponses..please... Regards, Tulasi