32K limits stops loading OEHR objects
Hi,
I have a newbie at work wanting to learn APEX and so she has attemtped to upload an install the sample objects OEHR. The problem is that the 32K limit on SQL is smaller than the provided script. Seems a little silly that the script is larger than maximum size but there you have it. I have tried some simple cut up the script but cut points are not so obviouc - any ideas - does anyone have a pre cut version etc.
cheers
and thansk in advance
Nigel
@Scott: I think he is trying to import the script with SQL Worksheet, which has the limit of varchar2 with a size of 32K in PL/SQL....
@Nigel: Try to install the script using SQL Developer (http://www.oracle.com/technology/software/products/sql/index.html)
Similar Messages
-
My Safari and Firefox randomly and unpredictably will stop loading whatever page I'm on and will not load any links on that page. When I do click a link on the page, the progress bar will hold at about 1/8 of the way and will not proceed. I can go to another web page and it will load fine, and I can click links on that page just fine. But when I return to the affected page, it still refuses to load. It will usually start working normally again after I visit another page and come back to it after 10-15 minutes. Nothing I have done so far has seemed to help this issue. I've tried clearing the history/website data, quitting and restarting safari, I reset the PRAM, all to no avail.
I'm running a mid 2010 macbook pro with Yosemite.
Thanks in advance for any suggestions.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
My Firefox ver. 3.6 stopped loading pages of any kind. Even Google or Facebook! I don't know how this happened. May it is because I tried to download a program that didn't even open up.... But I don't know how to make it work. All other browsers work normally, and I'm scanning for viruses even though my anti-virus did not warn me of anything... I tried to download a keygen and this is what happened. I can't figure out what it is. Not a connection problem. I even tried to uninstall an re-install firefox, but still nothing worked.
Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
1. Malwarebytes (Free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3.Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums you can use to help get rid of your infection. These include:
*http://www.bleepingcomputer.com/forums/
*http://forums.spybot.info/
*http://www.spywarewarrior.com/index.php -
Firefox will just stop loading/ connecting to the internet. The gray circle will just continually move but it never turns green to load the pages. I know it's not my internet because my internet explorer works just fine while this is happening to firefox. So I close firefox and then try to re open it but I get the message: Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. So I wait a little bit then try and re open it and still get the same message. I then go into my windows task manager and try and end the firefox proccess but it won't end. So I restart my computer and firefox eventually starts acting up again.
For possible causes of this error, and how to troubleshoot it see [[Firefox is already running but is not responding]].
-
Pages are slow to load or stop loading
Once I'm connected to wi-fi, my pages are slow to load or stop loading and tell me 'I'm not connected".
If you are having the problem on more than one computer it would appear not to be a computer fault or your browser that is the problem.
The first thing I would do is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often sort out problems and will also give you a "clean sheet" to start some diagnostics from.
If this doesn't help please post what Infinity package you are on, I assume with 18Mbps it's Infinity 1 but please confirm, and do you have an Openreach modem and what homehub you have.
Also run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
http://speedtest.btwholesale.com/ -
Firefox will work fine, then for no reason stop loading websites.
I'll be having a great time on Firefox when out of nowhere it will stop loading websites - it won't give me an error message, it will just saying 'connecting' and spin forever. This can happen at any time and is beginning to get really frustrating - sometimes I will go an hour without it happening, sometimes 30 seconds. I'm currently typing this on Internet Explorer, whilst Firefox refuses to open a webpage in the background.
Whenever this happens, I'll have to exit Firefox. This would be fine, although reopening Firefox will then give me a 'Firefox is already running, but not responding' error, followed by the now classic 'Your Firefox profile cannot be loaded, it is missing or inaccessible.' Trying to close it with the Task Manager doesn't seem to work - even when using it with administrative privileges it will not disappear. Right-clicking and selecting 'go to Detail' and trying to close it from there just gives me an 'Access Denied' error. Earlier today, after restarting the computer, Firefox gave me this message before I had even opened it, yet other times it works fire and loads my profile perfectly.
Is there a way to deal with this problem? I've tried creating a new profile, I've tried refreshing Firefox and I've tried Uninstalling and Reinstalling. This happens with or without add-ons installed and is driving me crazy. I have used Firefox for years so have a large selection of bookmarks and passwords that I don't want to lose. Currently running this on a fairly up-to-date laptop with Windows 8 installed.I was having this same exact problem for the last week. It started happening after Firefox updated. I tried a few different things that didn't help. I tried uninstalling and reinstalling which didn't help either. I finally fixed the problem tonight.
Here are the steps I took to fix it. Make sure you are logged into sync and hit the sync button to update it. This will save your bookmarks and user settings.
If you want to be able to restore your current session go into your main drive and click users, your user name, AppData, Roaming, Mozilla, Firefox, Profiles, open that folder and copy sessionstore-backups and save it to your desktop or somewhere you can remember.
After you have done that uninstall Firefox. Now restart your computer into Safe Mode.
Go into your main drive usually C on most computers and click users, your user name, AppData, Roaming. Click the Mozilla folder and delete it. Now hit the back button and click on Local. Find the Mozilla folder in there and delete it too.
You can now restart your computer and install a fresh copy of Firefox. Once it is installed you can log into sync and it will restore all your settings and bookmarks.
If you want to restore your previous session close Firefox and make your way back to AppData, Roaming, Mozilla, Firefox, Profiles, open the new profiles folder (Example: abcd1234.default) and paste the folder you saved called sessionstore-backups in there.
You can now open Firefox and all your tabs will be there, and after a few mins all your settings and bookmarks will be restored by sync. You shouldn't have any more problems following this method. The pages no longer stop loading and it closes like it is supposed to. -
How to load the object library at run time from within the script.
What i am trying to do from my library is that I wanted to load the object library file (.properties) file at run time through the script. I know that open script has a deprecated method "ft.loadObjectLibrary". Is there any other method other than the deprecated one?. Also is there a way that I can unload the library?
Thanks,
SriObject.border.fill.color.value = "255,255,255";
if you want to use rawValue of textfields to insert in there you will have to do
Object.border.fill.color.value = R.rawValue + "," + G.rawValue + "," + B.rawValue -
Initial down load of objects from R/3 to CRM
Hi Experts,
We are facing problem while we are doing initial download for the objects from R/3 to CRM. 1st 5 objects showing running(yellow) remaining all are showing waiting(red) in R3AM1.We maintained all the settings. Let me know anything we missed in this please!
Please provide Middleware settings for down load the objects from R/3 to CRM.
Thanks in Advance
RAMESHHi Rajesh,
Please check for those running objects whether there are any "Parent Objects". You open that adapter object which is in "Running" state and there is a tab called "parent objects". Please check whether there are any objects present there. If there are objects present there then those needs to be run first before running the current object.
Regarding the objects in "waiting" state the reason is because the parameter MAX_PARALLEL_PROCESSES in the table SMOFPARSFA is set to a small value I believe.Increase the value to 99 and then again try the loading of objects.
This parameter MAX_PARALLEL_PROCESSES indicates the total number of loads that can be done at a time.
Thanks
Abishek -
Webpages will simply stop loading, the connecting logo spins as if it is trying to connect but nothing ever loads. Even after closing Firefox, the firefox process in task manager will not disappear by itself and has to be deleted manually, until it is deleted, Firefox cannot be loaded. Other browsers (Chrome & IE) continue to load pages fine when this happens.
This problem has been going on for a while now but getting gradually worse. I am now at the stage where webpages will stop loading after about 10-15 mins. The problem appears to only happen when I have visited a page that requires the flash plugin to work. After reading other related entries in this support forum, I can safely say that I think Flash is the problem. Whenever the plugin is disable the problem never happens. Flash also appears in the crash reports from FF. See below for my system stats.
Windows 7 64 Bit
FF24
Flash = 11.8.800.168 with hardware acceleration turned off
Flash Protected mode = 0
Number of net connections in FF = 64 (same problem occurs with 256 or 48 connections)
Virus Killer = Bit Defender (Firefox is registered as an exception). Problem happens even with virus software disabled.
Computer is certified clean of malware, spyware and viruses.
I can see that this is a reoccurring problem that seems to pop-up with different FF versions.
I have tried all of the suggested solutions on other posts, including various types of full reinstall but to no avail.
Finally, I am not prepared to reinstall Windows over this so please do not bother offering this as a solution, furthermore, I am not prepared to downgrade my Flash to a less safe version, especially when other browsers can work with Flash with no problems.
I look forward to hearing a solution.Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps. -
Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?
No, you cannot downgrade your iOS device. That's not supported by Apple.
-
Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the MobileHello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
I just got a MacBook Pro 10.8.2. but facebook only works for about 3 minutes and then stops loading.
My computer is completely new with nothing on it at all. It was bought in the USA but i am living and using the computer in Israel, i dont know if that matters. every other website that i have gone on works just fine, facebook is the only one that stops loading after a few minutes. Please help. I dont know computers well at all and dont know the "computer language" so please if someone could help me and explain to me very simply what i need to do to fix the problem.
THank you so much!Try going to Starbucks and connect thru their WiFi and see if you experience same issue. If not, it may be your wireless router not compatible to wireless-N built in the macbook pro. It could be your router cycling on and off its connection without even noticing it. Do you have any other wifi at home that doesn't experience this issue?
You need to do process of elimination. Keep us posted. Thanks! -
Memory limitation to load a Jpeg
Hi all,
I want to use the loader component to load an image within my
Flash lite movie, when I try to do it with a Jpeg (612pix X 792 pix
/ 96dpi X 96dpi), the device emulator says me in runtime:
Problem with content: 11 - Not enough memory available to
decompress
if I do the same with another Jpeg (533pix X 526 pix / 96dpi
X 96dpi) there is no problem.
My question is: what are the memory limitations to load and
to display an Image (Jpeg or bitmap)?Hi Thamis,
Take a look at the flash.net.FileReference class here:
http://livedocs.macromedia.com/flex/2/langref/index.html
This is the built in Flash support for file upload. You'd
handle the upload with a servlet/jsp/etc. server-side component to
save it to disk or as binary data in a database.
Best,
Seth -
When I do a manual refresh on certain sites like NY Times or CNN, or when sites like NYT periodically push an update through, the updates won't stop loading. It's as though the update never completes. The rotating circle icon on the affected tab just continues indefinitely. While this is happening, other websites that I try to open or update are either very slow or unresponsive.
My fix has been to force the update to terminate by using the red X button next to the website name. Then other websites respond normally but often the one that I have manually stopped becomes unresponsive.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Problem in down loading CUSTOMER_MAIN object
Hi Experts
we have done filter settings to download single customer master from ECC 6.0 toCRM 5.0.
After intial load, the object CUSTOMER_MAIN still in running status for a long time in R3AM1.
Please help us how to resolve this
Thanks & regards
Vikram GopalHi,
Note 788822 - Filtering does not work
would surely solve your probs...
Best Regards,
Pratik Patel
<b>Reward with Points!</b>
Maybe you are looking for
-
HT201320 How can I setup two gmail accounts on my iPad with iOS6?
Only one of my gmail accounts will send or receive mail. Why?
-
SMS alert - I dont want the name of the sender appearing on the screen
Prior to downloading the recent upgrade, my SMS alert would simply notify me that I had a new text message but would not identify the sender. Now, the sender's names appears on the screen. How can I change my setting so that the sender's name is not
-
Reading second sheet of excel file while uploading
Hello Freinds, I want to read second sheet of an excel file while taking the data from excel file into an internal table. Kindly help me with a FM which would take the sheet number too with the input OR a suitable option.
-
Buenas, tengo un iphone 3gs...
Buenas, tengo un iphone 3gs y lo acabo de restaurar a ios 5.0.1 pero no tengo activado el multitasking ni el centro de notificaciones, que puedo hacer para activarlo?
-
I am trying to add another ipod device to my itunes account, but itunes does not pick up the device. I have 2 other ipods that work just fine. Only iphoto picks up the device.