3355 initial configuration question

When I am setting up the 3355 MSE I have a question about the second ethernet interface. I am not using HA. Can I assign the same IP address to the second port as I do to the first port or does it have to have a seperate address? I noticed in the Prime that when you add the MSE it only asks for one IP address.

So I have a question regarding the port configurtion.
In the autoconfiguration script there is an e0 and e1. However, on the back of the physical box there is a IMM, e1 & e2. I have configured e0 only via the script. But when I ping the default gateway it is reaching out with 1.1.1.10. Even though I have configured it with the correct IP.
I tried to move the cable to the IMM port with no success. I tried E2 with same results.
The startup config is minimal in terms of explaining what each does.
Any idea what physical port e1/2 maps to e0/e1 in the startup configuration and what should be configured and where the cable should be plugged in? No HA setup here. Just a straight IP connection into our network for communication with NCS Prime..
Regards

Similar Messages

Very basic initial configuration question.

Hi.
I replaced a Catalyst 2960G for a C2960X-24-L in a network where there are already five switches.
I have no idea how to assign it an ip : is there anyone here willing to explain that in very simple way ?
I tried plug it in the existing network, but didn't work.
I'm not the one whom installed the network, and I'm doing that to help.
Thank you.
Pierre

Also if you are adding a new sw to the network i recommend you to reset the vtp in that sw (if your network has it.) if you are not sure just do "vtp mode transparent" "vtp mode client" assuming that you are replacing a client sw.
Then you should verify before connecting to the network:
- type of stp that your network is running
- if you have vtp check the config and use the same domain, version, password so the sw gets the vlans from the
- when you have all the vlans set in the sw then add the interfaces to the vlans
- be sure that you are not replacing the root sw.
Maybe there are others things to check but thats what comes to my mind now
Regards

Cannot find "Initial Configuration" in NWA

Hello,
I have installed NW 7.1 PI, I'm following the document called "Installation Guide - SAP NetWeaver Process Integration 7.1 on Windows: MS SQL Server".
In the Post Installation section there is the item, saying that I need to logon to NWA with the j2ee_admin user and the master password and choose Configuration Management -> Scenarios -> Configuration Wizard -> Initial Configuration (dropdown menu) -> NetWeaver Initial Setup; and choose Start.
However when I log on http://win03-sap:50200/nwa I can see only the following menus at the top:
System Management | Analysis | Deploy and Change
Overview | Administration | Monitoring | Configuration
But there is no "Configuration Management" and neither "Deploy and Change" nor "Configuration" contain Scenarios and Configuration Wizard.
Question: Do I have some wrong version of Installation Guide or wrong version of NWA? Please advise where to get the updated Installation Guide, or where I should navigate to complete the Post Installation steps for PI usage.
System parameters:
SAP System ID: SP2
SAP Instance: 02
Central System with PI usage
Thanks a lot in advance!

Hi,
Are you sure you have installed PI? Because from your NWA description, you are not looking at PI NWA, you are looking at regular NW 7.0 NWA. Make sure you have PI usage type installed and you can do that by going to http://<host>:<port>/utl/UsageTypesInfo
You should see atleast these usage types:
SAP NetWeaver 2007 PI PI Process Integration
SAP NetWeaver 2007 AS AS Java Application Server Java
SAP NetWeaver 2007 AAS AS ABAP Application Server ABAP
i'm not sure if you used wrong media to do the installation, but it doesnt sounds like PI got installed. Did you select SAP Netweaver Process Integration 7.1 from the sapinst menu?

Initial configuration of ACS 5.1 for EAP authentication for Wireless clients

Hi,
I have set-up with below devices :
Wireless LAN controller 5508
LAP 3302i
and ACS 5.1
since i am new in ACS 5.1 configuration , I need so information to go ahead to configure ACS 5.1.
which EAP method to use for wireless client authentication ? what is the best practice ?
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
I will be obliged to get atleast initial configuration for ACS 5.1 to enable the EAP method,
I need GUI based initial configuration for ACS 5.1
This mentioned ACS 5.1 is installed on ACS 1121 hardware appliance.

Hi,
which EAP method to use for wireless client authentication ? what is the best practice ?
-> I would advise the most widely spread EAP method, which has the best ratio security/easy to deploy: PEAP with MSCHAPv2, which is available by default by all windows machines.
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
-> You will always need to install a server certificate, however, there is no need for client certificate because the authentication is based on the MSCHAP credentials exchange, not certificate based. The only requirement on the client regarding certificates is the following.
If you want to validate the server certificate, you have to install the server certificate under the trusted CAs of the clients.
If you do not require to trust the server certificate, you can simply disable the option of server certificate validation.
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
-> The server certificate can be a simple self signed certificate that you generate and install on the ACS GUI.
Please feel free to follow this step-by-step guide on
PEAP under Unified Wireless Networks with ACS 5.1 and Windows 2003 Server:
http://www.cisco.com/en/US/partner/products/ps10315/products_configuration_example09186a0080b4cdb9.shtml or in pdf
http://www.cisco.com/image/gif/paws/112175/acs51-peap-deployment-00.pdf.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions

Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS.   Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab.    Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective?   When would a Developer pick one over the over?
Thanks for any advice
-Dave

Hi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc

Error while initial configuration of ESR

Dear All
I have installed CE7.1 SP3 and ESR. I am doing the initial configuration of the ESR and following the Installation Guide - SAP Netweaver Composition Environment 7.1 SP3 - Developer Edition
I am in the configuration wizard of the nwa and trying to configure 'Configuration of ESR in CE'.
I am getting one error, the log is below.
Can anyone tell me the way out and how can I insall CE7.1SP3 successfully on my system
The log is Error:
ClientServerException exception:Import failed: Internal error
during pvc call: Version management was unable to execute the
last action because a temporary internal lock has been set.
com.sap.aii.utilxi.misc.api.ResourceException: Import failed:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCa
use(PvcUtils.java:86)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:82)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvc
Import(RepPvcTransport.java:94)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.pvcImport(TransportServiceImpl.java:789)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importZippedStream(TransportServiceImpl.java:868)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importXiStream(TransportServiceImpl.java:672)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.executeM
ETHOD_ID_WRITE_VERSIONSET(CmsHmiMethods.java:513)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(
CmsHmiMethods.java:128)
at
com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(Hmi
sServiceImpl.java:167)
at
com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.ja
va:212)
at
com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImp
l.java:98)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationCont
ext.proceedFinal(RequestInvocationContext.java:43)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTr
ansition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource
.invoke(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Stateles
sInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.jav
a:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Security
Check.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Exceptio
nTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChai
nsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvoca
tionHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy2405_10002.process(Unknown Source)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:331)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:238)
at
com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(H
misInternalClient.java:70)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletI
mpl.java:532)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletI
mpl.java:670)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.runServlet(FilterChainImpl.java:163)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:82)
at
com.sap.engine.services.servlets_jsp.server.servlet.Authenticat
ionFilter.doFilter(AuthenticationFilter.java:124)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:74)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.run
Servlet(HttpHandlerImpl.java:425)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.han
dleRequest(HttpHandlerImpl.java:289)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:376)
at
com.sap.engine.services.servlets_jsp.filters.ServletSelector.pr
ocess(ServletSelector.java:85)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.servlets_jsp.filters.ApplicationSelecto
r.process(ApplicationSelector.java:160)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.WebContainerInvoker.
process(WebContainerInvoker.java:67)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.ResponseLogWriter.pr
ocess(ResponseLogWriter.java:60)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.DefineHostFilter.pro
cess(DefineHostFilter.java:27)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.MonitoringFilter.pro
cess(MonitoringFilter.java:29)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.server.Processor.chainedRequ
est(Processor.java:309)
at
com.sap.engine.services.httpserver.server.Processor$FCAProcesso
rThread.run(Processor.java:222)
at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.
java:37)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThr
ead.java:152)
at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.
java:247)
Caused by:
com.sap.aii.ib.server.propagation.XIPropagationException:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.create
FromException(XIPropagationException.java:67)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:239)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.aii.ib.server.pvcadapt.PvcTransactionControlProxy.invok
e(PvcTransactionControlProxy.java:79)
at $Proxy2571_10002.importXiContent(Unknown Source)
at
com.sap.aii.ib.server.propagation.Propagator.importXiContent(Pr
opagator.java:92)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:65)
... 69 more
Caused by: com.sap.aii.utilxi.misc.api.BaseException: Internal
error during pvc call: Version management was unable to execute
the last action because a temporary internal lock has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.wrapRa
wException(XIPropagationException.java:150)
... 79 more
Caused by:
com.sap.aii.ib.server.pvcadapt.lockmgr.XiLockDeniedException:
Version management was unable to execute the last action
because a temporary internal lock has been set.
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.createLockDeniedException(TransactionalLockManager.java:187)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.requestLock(TransactionalLockManager.java:86)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.CentralLockManager.reque
stLock(CentralLockManager.java:113)
at
com.tssap.dtr.pvc.propagation.server.PropagatableBlobTransientC
lass.lockPropagatableBlob(PropagatableBlobTransientClass.java:1
10)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.getEx
clusiveLock(PropagatableProvider.java:644)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.setDa
ta(PropagatableProvider.java:574)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:780)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:821)
at
com.tssap.dtr.pvc.objectpers.Propagator.import_(Propagator.java
:104)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:233)
... 77 more
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process
Thanks & regards

Hi,
Steps to be configiured after tnstalling CE 7.1 and ESR in NWA
1. Initial setup of Functional unit SLD
2. Configuration of Services Registry Webservice Destinations
3. then follow the step of Configuration of ESR.
make sure the above steps are successful.
Actually even I have got the same error but whoile trying the same steps it worked fine.
Hope this helps.
Regards,
Gopinath M.
Edited by: Gopinath Myneni on Feb 12, 2008 3:12 PM
Edited by: Gopinath Myneni on Feb 12, 2008 3:16 PM

Error while configuring initial configuration of ESR

Dear All
I am continuously facing problem while doing the post installation steps for Configuration of ESR in CE.
Here is the log trace attached. Please go through it and tell me the correct way.
I am using the TechEd07 DVD for the CE7.1 and downloaded ESR SP03 from SMP.
This is the error that I am getting when the execution reaches to 97%.
I am doing the initial configuration of the ESR and following the Installation Guide - SAP Netweaver Composition Environment 7.1 SP3 - Developer Edition
I am in the configuration wizard of the nwa and trying to configure 'Configuration of ESR in CE'.
I am getting one error, the log is below.
Can anyone tell me the way out and how can I insall CE7.1SP3 successfully on my system
The log is Error:
ClientServerException exception:Import failed: Internal error
during pvc call: Version management was unable to execute the
last action because a temporary internal lock has been set.
com.sap.aii.utilxi.misc.api.ResourceException: Import failed:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCa
use(PvcUtils.java:86)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:82)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvc
Import(RepPvcTransport.java:94)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.pvcImport(TransportServiceImpl.java:789)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importZippedStream(TransportServiceImpl.java:868)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importXiStream(TransportServiceImpl.java:672)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.executeM
ETHOD_ID_WRITE_VERSIONSET(CmsHmiMethods.java:513)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(
CmsHmiMethods.java:128)
at
com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(Hmi
sServiceImpl.java:167)
at
com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.ja
va:212)
at
com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImp
l.java:98)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationCont
ext.proceedFinal(RequestInvocationContext.java:43)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTr
ansition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource
.invoke(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Stateles
sInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.jav
a:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Security
Check.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Exceptio
nTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChai
nsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvoca
tionHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy2405_10002.process(Unknown Source)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:331)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:238)
at
com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(H
misInternalClient.java:70)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletI
mpl.java:532)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletI
mpl.java:670)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.runServlet(FilterChainImpl.java:163)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:82)
at
com.sap.engine.services.servlets_jsp.server.servlet.Authenticat
ionFilter.doFilter(AuthenticationFilter.java:124)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:74)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.run
Servlet(HttpHandlerImpl.java:425)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.han
dleRequest(HttpHandlerImpl.java:289)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:376)
at
com.sap.engine.services.servlets_jsp.filters.ServletSelector.pr
ocess(ServletSelector.java:85)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.servlets_jsp.filters.ApplicationSelecto
r.process(ApplicationSelector.java:160)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.WebContainerInvoker.
process(WebContainerInvoker.java:67)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.ResponseLogWriter.pr
ocess(ResponseLogWriter.java:60)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.DefineHostFilter.pro
cess(DefineHostFilter.java:27)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.MonitoringFilter.pro
cess(MonitoringFilter.java:29)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.server.Processor.chainedRequ
est(Processor.java:309)
at
com.sap.engine.services.httpserver.server.Processor$FCAProcesso
rThread.run(Processor.java:222)
at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.
java:37)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThr
ead.java:152)
at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.
java:247)
Caused by:
com.sap.aii.ib.server.propagation.XIPropagationException:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.create
FromException(XIPropagationException.java:67)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:239)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.aii.ib.server.pvcadapt.PvcTransactionControlProxy.invok
e(PvcTransactionControlProxy.java:79)
at $Proxy2571_10002.importXiContent(Unknown Source)
at
com.sap.aii.ib.server.propagation.Propagator.importXiContent(Pr
opagator.java:92)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:65)
... 69 more
Caused by: com.sap.aii.utilxi.misc.api.BaseException: Internal
error during pvc call: Version management was unable to execute
the last action because a temporary internal lock has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.wrapRa
wException(XIPropagationException.java:150)
... 79 more
Caused by:
com.sap.aii.ib.server.pvcadapt.lockmgr.XiLockDeniedException:
Version management was unable to execute the last action
because a temporary internal lock has been set.
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.createLockDeniedException(TransactionalLockManager.java:187)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.requestLock(TransactionalLockManager.java:86)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.CentralLockManager.reque
stLock(CentralLockManager.java:113)
at
com.tssap.dtr.pvc.propagation.server.PropagatableBlobTransientC
lass.lockPropagatableBlob(PropagatableBlobTransientClass.java:1
10)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.getEx
clusiveLock(PropagatableProvider.java:644)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.setDa
ta(PropagatableProvider.java:574)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:780)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:821)
at
com.tssap.dtr.pvc.objectpers.Propagator.import_(Propagator.java
:104)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:233)
... 77 more
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process
Thanks & regards

Dear Rathish
Thanks for the reply and forwarding the problem to the developemnt team.
As I mentioned that the execution of the ESR failed when it reaced to 97%.
The error was it was not able to find some ..xi.. component and if you go to the log you will find that (come to the end in the log i.e. mentioned above)
" Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process "
And also I am following one help from 'http://help.sap.com/saphelp_nwesrce/helpdata/en/46/b3a7d01b475a62e10000000a11466f/frameset.htm' and they say that you will have the 'zero admin template'.
But when I go to 'Configuration Management > Infrastructure > Java System Properties
In the template I can see 3 things and theya are:
1. instance_development
2. CE_Complete_Stack_development_full
ID43799
3. CE_Composition_Environment_development_full
and there is no zero admin template as given in the help that I getting from the above guide.
I think this is the issue (missing zero admin template)
I got this from the SMP but dont know when and how to deploy to CE.
Can you please help me in this.
Thanks & regards
Vivek

Please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4.

please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4?

place the device in pairing mode and re-pair.
If you don't know how to do this, go to the manufacturer's website and download the user guide for your device.

Error occurring in SOLMAN Initial Configuration

I have installed Solution Manager 7.0 EHP-1 on a Windows 2003 64-bit server.
Using u201CClient =001u201D transaction SOLMAN_SETUP, I performing the Initial Configuration, During that time I got below errors.
Server Details :-
         Server name = sapsolman
         SYSID        = SOM
         Database     = SQL
Error -1
           Runtime Errors UNCAUGHT_EXCEPTION
           Exception       CX_FQDN
I resolve by myself by adding u201Cicm/host_name_full = sapsolman.cpt.comu201D in parameter end as well as with u201CC:\WINDOWS\system32\drivers\etc\hostsu201D , and proceeding further with Initial Configuration.
Error -2
When I am creating SOLMAN_ADMIN user I got below error
1- Business Partner 0000000101 successfully created for user SOLMAN_ADMIN
2- Role assignment to user SOLMAN_ADMIN Changed
3- User SOLMAN_ADMIN Sucessfully Created
4- u201C The selected templates do not contain any authorization data u201C      <----- Error
Error -3
               Next step in Initial Configuration returns the following error:
System SOM does not exist      <----- Error
E::000                                       <----- Error
Kindly give solutions for Errors 2nd & 3rd ASAP.

Hello,
FQDN referes to Fully Qualified Domain Name - and this would indicate the FQDN has not been set in RZ10
parameter icm/Host_name_full has not been equated to the fully qualified Domain name of the server.
Is SOM and SID of a System? Has it been declared in SMSY?
Seems you may have some IMG activities left to do in SPRO...have you configured your BC Sets? Have you enabled HTTP Services, etc, etc?
Regards,
Paul

Solution Manager - initial configuration

Lance,
I apologize before hand, I think I am missing something simple or I am clueless right now, Here is my situation-
I am walking through the IMG steps of setting up solution Manager. I already in have in place the SNC SAProuter connection operational to SAP.
SAPOSS connection is confirmed working.
I have gone to Tx DSWP, maintained the S- user for SAP support, and it connects and logs on, also re-entered the password and saved it to make sure it is working.
I have made sure the user I am using has the sap_suppdesk_admin role
When I go to SPRO and select initial configuration, it creates the admin and communication users, however when I put in the S-ID which I have it comes back with the following error message
error creating communication to SAP Service and Support
If I go to Tx SLG1, I get the error below
"read the documentation about the function module" SR (RFC Utilities)
Now I have done the same steps in client 001 and 100 which I created from 000 and user auth from 001.
I am just not able to get it to connect, the one thing I know is when I go to Tx AISUSER, I can put in a user but no contact person (s-id), I see a no. of posts in the forum about this but I do not believe thats my issue as that step is a 2 or 3 items below where I am right now.
i have the latest patches ST 400 0011
any ideas welcome

E::000 basically means that the system is trying to show an error message "000" from a specific error message set.This problem is caused by a program error. If the authorization check fails, no relevant error message is displayed.
have you created any system by the name SM1 in SMSY?
Regards,
Rajeev

Implementation & initial configuration of SolMan 4.0

Hello ALL,
I am new to Solution Manager. I know the functionalities and the basic steps like defining the project, system landscape, assigning team members etc.
I have been asked to help with implementation and initial configuration of SAP's Solution Manager 4.0
we are doing a brand new implementation, making this requirement mandatory. I need assistance in determining what SM4 can do for us in our particular circumstances and guidance in configuration of communication between systems. I need guidance in establishing the communication between each of the systems and SM, determining appropriate thresholds for warning, development of automatic notification of problems (email, or perhaps even auto pages). We will also want to evaluate the pros and cons of using solution manager for change management.
Our R/3 system is at WAS 6.20 and running on MS SQL Server 2005. Solution Manager will be installed on it's own dedicated server, which we have built and loaded with the OS. We have Solution Manager 4 DVDs and the prerequisite WAS 6.40, Netweaver 2004s disks. We currently have development, QAS and production R/3, ESS Portal and Business Warehouse (BI). we also have a standby production server. All will need to be monitored using Solution Manager 4.
Can anyone help me how to go about with initial implementation and configuration. Appreciate your answers.
Thanks
Vom

Hello Vom,
For me the better information source for a beginner is service.sap.com/rkt-solman, there is very good iTutor under the 4 different user roles that will help you with satellites connection configurations, use of the different scenarios of solman.
For configuring the selected escenarios the best is in SOLMAN->spro read the step documentation.
Also alias solutionmanager->Media Library->Documentation and Technical papers will give you more extra information.
Best regards,
Dolores

SM 7.0 EHP1 SR1 - solman_setup initial configuration - No execute authority

I am performing the initial configuration step of SOLMAN_SETUP, when I receive the error below.
Error: E 002 No execute authority
Step: Get ABAP System Info
This occurs when I click the "Start J2EE Configuration" button on the J2ee Configuration screen(Step 3). This opens another browser window, where I enter the solman_admin user that was created in an earlier step. On the first screen, I enter the
Solution Manager Administrator(solman_admin), J2EE Administrator(j2ee_admin) user/password, as well as the password for the Technical Users (SLDDSUSER, etc).
The script then starts and stops on step 5 of 118, with the error shown above. Below is the output from the link provided on the error window. It is not clear to me, what execute authority is missing and for which user. Any suggestions on where to look for further details about this error, or possible solutions would be appreciated. Thanks.
InvokeService:Get ABAP System Info
Library: sap.com/tc~lm~config~bs
SourcePath ./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Time 2011/03/22 at 12:41:32
WSDL service/NW/AbapServer/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal.wsdl
Destination
<Destination name="ABAPHost" subtype="message" type="JCOConnection"> <JCOConnection><host>SUZUKI</host><user>SOLMAN_ADMIN</user><password>% secure content %</password><sysnr>00</sysnr><sapnr>001</sapnr><lang>en</lang></JCOConnection></Destination>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : SUZUKI
sysnr : 00
client : 001
language : en
function name: S_TCC_LMCFG_LIB_GET_SYSINFOInput
<Input/>
InvokeService- Result: Error
Duration:734 ms
SourcePath./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Refresh Env. Messages: false
Output
<S_TCC_LMCFG_LIB_GET_SYSINFOOutput xmlns:system="http://sap.com/ctc/systeminfo"> <CLIENTS/> <SAPRL/> <LOGSYS/> <LOGSYSTEXT/> <SID/> <OPSYS/> <RETURN> <BAPIRET2> <TYPE>E</TYPE> <ID>SCTC_API</ID> <NUMBER>002</NUMBER> <MESSAGE>No execute authority</MESSAGE> <LOG_NO/> <LOG_MSG_NO>000000</LOG_MSG_NO> <MESSAGE_V1/> <MESSAGE_V2/> <MESSAGE_V3/> <MESSAGE_V4/> <PARAMETER/> <ROW>0</ROW> <FIELD/> <SYSTEM>SMXCLNT001</SYSTEM> </BAPIRET2> </RETURN> <CLIENT/> <COMPONENTS/> </S_TCC_LMCFG_LIB_GET_SYSINFOOutput>
Regards,
Russel Robbins

Thanks to all for the suggestions.
I first reviewed note 1451426, but the changes discussed in that note, were already present in my system.
I then performed a trace while repeating the error, but I did not find any trace output (at first). I then added SAP_ALL and SAP_NEW to users SOLMAN_ADMIN and J2EE_ADMIN (just in case), and repeated the initial configuration step. After adding these profiles, the step completed successfully.
One additional note, after reviewing the trace information closer, I did find the failing object that was causing the issue originally (see below). This occurred for user SOLMAN_ADMIN. The other option would have been to add this object/value to one if the roles in use, as Ragu had suggested.
S_CTC      RC=4 ACTVT=16;
Also, I noticed that in the trace, the only users reported were SOLMAN_ADMIN, SAPJSF and SLDAPIUSER, so the profiles were definitely not needed for user J2EE_ADMIN.
Thanks again for the suggestions from everyone.
Regards,
Russel

Errors solman_setup initial configuration in StartSLD Configuration step

Getting an authentication error when trying to sign into SAP netWeaver using the solman_admin account created in the first step of the initial configuration. I tried going back and creating another user and setting a new password but am still getting the same User authentication failed. I am able to sign in as the J2EE_ADMIN user id here and continue the configuration but get errors on step 66 of 137 Maintain SLD data supplier user. Error: Name or password is incorrect. I am able to click on in the error box the Step: Maintain SLD data supplier user which takes me into the J2EE Engine Useradministration. In here I do not see the solman_admin userid if I try to create it I get the error Current suer has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for the user creation, check your Persistence Configuration."
I do find my SLD data supplier user SLDDSUSER but am not sure what to fix here for step 66 noted above.
Within Abap I am able to sign in as solman_admin successfully

As I said in my initial problem I cannot create the solman_admin in the UME. I access the UME via "http://cvlnxsp1.corp.cvpsnet.net:51000/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp" (J2EE Engine Useradministration)
What role or group do I need to give the J2ee_admin id to allow me to get around the error when clicking on create user in the UME
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
In ABAP I have given the j2ee_admin sap_all so I am assuming there is a role or group that j2ee_admin has to have in the UME?

SOLMAN_SETUP - Problem in J2EE Configuration in initial configuration

Dear All
I am doing Initial Configuration using SOLMAN_SETUP in Solution Manager 7 EHP1 on Windows 2003.
The 1st step, i.e. user authorizatin is complited. I have used existing user and update authorization.
in 2nd step when I Start J2EEConfiguration, the new browser windows openwith "The page cannot be displayed".
Thanks in advance,
Nirav

Hi,
This is due to LAN setting issue in i-explore.
Kindly open internet option in iexplore -> connection -> Lan setting -> proxy server -> Advaancd -> exception column -> Add the hostname address in address bar with starting * < hostname address> *-> save -> try it.
kindly revert back if u have any issue.
Regards,
Karthik

Fresh Netweaver 73 with BPM and BPR - initial configuration

We installed a Netweaver 73 Java Only with the UT types EP, BPM&BPR, BI Java and NWDI.
We are looking to the initial wizard configuration tool for BPM, but we did find it.
We expect to find something like the wizard for the PI configuration.
Beside this url where we expect to find informations does not works:
http://help.sap.com/saphelp_nw73/helpdata/en/de/434b624d74451ca2e0faa188534118/frameset.htm
Any suggestion about the initial configuration step for a fresh BPM system ?
regards

start your configuration http://host:port/sld/fun
it is straightforward....

3355 initial configuration question

Similar Messages

Maybe you are looking for