3400 i-trigue speaker power cord: Need Help!

I have 3400 i-trigue speakers. I got the speakers a year and a half ago, and Creative is still selling them. I lost the power cord- the cord that plugs the subwoofer into the wall (2 volt 4.2 amp). Creative has been "out of stock" of a replacement cord since early May, and one honest customer service employee told me that they likely will not be getting anymore back in. I cannot find a replacement cord anywhere online or at an electronics store like Radio Shack. I am not an electronics expert, and I don't know what to do. (Creative Labs has NOT been very helpful). I desperately need this $2 cord, but it seems my only option is to buy a new set of speakers. Help!

It would be better to buy a US powercord and then a plug adapter for Australia but you could use an Australian adapter with a US plug adapter. The power "brick" is the same and handles input from 100 to 240 volts so works anywhere in the world; you just have to get it plugged in to the local power supply. When you say the cord broke I guess I am thinking you mean the power brick broke; if not you can just get the part of the adapter (cord) that runs from the brick to the wall at the equivalent of a Radio Shack in Australia then get a US one when you get back.

Similar Messages

  • Purchased extreme to replace modem/router DSL used telephone cord need help with set up

    Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
    Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
    How do I get extreme to work as the modem and router ?

    How do I get extreme to work as the modem and router ?
    you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

  • Power cords please help!

    I need appliances (washer/dryer, fridge, stove). Do I need to buy a power cord separately for any of these? I noticed there was an option online to add a power cord.

    *clears throad*
    Ok, here's the deal. If all appliances are ELECTRIC:
    Washer, Dryer: Dryer Duct Vent (SKU: 9282812), Washing Machine Fill Hose(SKU: 5446387), and 3 (SKU: 2900490) 
    or 4 (SKU: 3921046) prong power cord. 
    Fridge: If waterline is present, your choice of varied waterline install kits.
    Stove: 3 or 4 prong range cord.  ( 7045618 or 7045707, there are other options but none cheaper )
    YES, you may use your own accessories. BUT, if you get Best Buy's accessories and it's all electric (NOT gas), installation, leveling, etc, will all be free on the items you listed. It would be done by the delivery people. For the fridge, this assumes that a waterline is present with a valve on it. For the washer, it assumes a proper drain spout is there.
    The reason that Best Buy's items must be used is for certification purposes. You can't expect them to certify and back up something hooked up using an old part, can you?
    For all items, haul-away and recycling are included free (regardless if you get the accessories or not), but there are conditions - it can't be obscenely hard to remove these items from the house, etc. 
    I hope that answers your questions?
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • JBL PowerUp Speaker Power Cord

    I have a JBL powerup speaker, and I love it, however theower cord that came with it is one of those that has a switchable outlet, which broke and now causes the device to go on and off unless held in place. Is there anyone who knows where exactly I could get a new outlet attachment for the U.S. or even a new cord all together? I cant seem to find one anywhere. It's an 18V 2.5A switchable power supply model number EFS5001800250CE.

    Hi,
    I have the part you need, I am in the UK and have the US attachment.
    I don't suppose you have the UK attachment spare, and we could do a swap?
    All the best

  • Blinking Red Power Light Need Help With Self Repair

    I have a rear projection 57 inch TV, model number 57H84R and whenever I try and turn it on all I get is a blinking red power light.  I've seen online where it might be a fuse in it but when I called customer support they told be it was a board.  I don't have the manual anymore and i've read it is needed to try to repair it myself.  I've anyone had any advice on where to start at or any place online that would be helpful in trying to fix it myself would be appreciated. My e-mail address is [email protected], thank you.

    When you moved in January, how long was the Mac not connected to AC power? You could have a weak PRAM memory battery. Have you tried zapping PRAM? See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
     Cheers, Tom

  • Replacing my dv6-1260se power supply, need help.

    I am in need of a new power supply for my laptop and was wondering which one would be the best.  i believe my options are the 90w smart ac power adapter and the slim power adapter.  any suggestions?

    So what's the issue you're having?
    I have never heard that rumor, a volt is a volt, an watt is a watt.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Nightblade B85c power supply need help

    i have a nightblade b85c and the power supply is only 350w and i would like to change it but i carnt seem to get the old power supply out any help please?

    Please open all cover(up/left/right) and then remove everything(motherboard/HDD/ODD...).
    Then you can be replaced power supply.

  • T61 main power issues, need help

    My T61 laptop can only work on the battery today. When I removed the battery and kept the AC adapter connected, the laptop could not be turned on. When both the battery and the AC adapter were connected, the laptop could work but the battery would not be recharged.
    Anyone can give some advice? Or anyone could tell me where can I get help near Dublin, Ireland? Many thanks! 

     Ireland English01-881-1444
    (Warranty service and support)
    24 hours/day
    7 days/week
    Give the above number a call, and they will arrange something for you. They will probably
    get a courier to pick it up from your residential/business address, fix it, and then drop it
    off again by courier.  
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Hi I m in big problem a cd was stuck in my macbook 2009 white unibody and it suddenly died but now any how the cd is out but it is not powering up I have tried to rest smc and pram and nvram no sound no display only fan work on power on need help

    I m not sure about os version

    Startup your Mac while holding down the C key and inserting your install disc at the same time.
    From there you should be able to use the Disk Utility app to repair the startup disk and reinstall OS X.
    If that won't work, when you boot your Mac normally, if you do not hear the startup chime, that means your Mac has not passed it's startup diagnostics test. If that is the case, you need to take your Mac in for service.
    Apple - Find Locations

  • IPod Nano 4 Gb: Fire wire message on the display + no power off: need help

    I have a new iPod 4Gb since a month until now not able to optimize the usage. The iPod keep on displaying the following message (after reset and update of the software):
    "FireWire Connections are not supported. To transfer songs. Connect the USB cable provided. Press center to dismiss"
    When I push the Dismiss buttom immidiatly the message pops up again. After reset at the PC site still the same.
    Additional to this problem I can not swith the dam thing off. The Pause/Play buttom is not reacting. We use the iPod and Ipod shuffle in our Quality assurance test enviroment.
    Start and stop a song is no problem.
      Windows 2000  

    I would make sure your PC doesn't have any viruses on it. Then bring your iPod in to the apple store to have them check it out. May be just a simple fix or you got a bad iPod. Doesn't happen that often but with any piece of hardware it can happen.

  • Power cord replacement

    Received this Shipping Notification:
    Thank you for choosing HP for your technology needs. We value your business.
    This is an automated shipping confirmation of an order you placed for the HP AC Power Cord Replacement Program.
    Your order was shipped on 11/17/2014 via DHL GM using tracking number
    Please follow the instructions you will receive with your replacement AC power cord to dispose of your defective AC power cord.
    Order Details:
    Order No:
    Order Date: 11/13/2014
    Item(s) Information:
    Item No:
    Description: Replacement power cord – INDIA wall plug
    Unit Price: $0.00
    Quantity: 1
    Thank you for your order. We apologize for any inconvenience you may have experienced.
    Hewlett - Packard Company
    But DHL website reports no results for it.
    very confusing how & when I will recieve the power cord.
    please help on this topic.

    Hi,
    Please wait for 48 hours.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Power cord not lighting up!

    So usually when I plug the power cord into my macbook pro, the light does not come on. At first, I figured it was a problem with the cord because it was old (both computer and cord purchased in 2005) and because when I messed around with the connection on the "brick" and moved it around, it would work.
    Now, I bought another power cord, and it is doing the same thing. I can still get a good connection, but it sometimes takes a good 5-10 minutes of screwing with the power cord. Help!?

    Does the new mag safe have an "L" shaped end instead of a "T" shaped end? I have heard that there have been some problems getting them to work properly with original MBP's.
    http://support.apple.com/kb/TS3499
    Not sure which Mac you have or if it might need the update for the charger to work. Best thing would be to do as Baby Boomer suggests, take both adaptors and your Mac in for evaluation.
    Good luck!

  • Do power cords stop working

    I have a power cord that had the green light on and now it doesn't?  Could that mean the power cord needs to be replaced?

    You can get a 60W power adapter for about $20 on eBay http://www.ebay.com/sch/i.html?_trkparms=65%253A1%257C66%253A2%257C39%253A1&rt=n c&_nkw=macbook+power+adapter&_dmpt=Laptop_Adapters_Chargers&_sticky=1&_trksid=p3 286.c0.m14&_sop=12&_sc=1

  • HT201210 ive tried all of this many times now and it went through a restore once but my iPod still said i needed to hook up to iTunes (you know the screen showing a power cord and the iTunes icon) ive tried and tried but still can't get it PLEASE HELP ASA

    I've have done all of the tips Apple has suggested and have tried many times to restore it but it still won't work.  IThe first time it went through the whole process and it seemed like it worked but it still showed the Screen that has a iPod power cord that has an arrow pointing to the iTunes thumbnail.  And now i thought well maybe it is restored i just need to sync it to Itunes but no my computer said that i encountered a problem my iPod and that i need to restore it so I tried.  And at the end of the first step, the Verifying Software step, it said that the device "iPod" could not be found, so Itried it again and again but it still came up with the same results so I'm screwed so if you can could you please help me i really need after a disabled iPod for about 2 to 3 months now.  So if you could please help i would appreciate it alot. THANK YOU.

    - Reboot the computer, try another USB port and try anohter cable.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Try placing the iPod in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Power cord for Mac Book question...need some help

    Hi...my Mom gave my niece her MacBook but kept the power cord. I bought one on eBay for her and it was a 60W MagSafe cord. She seems to be having power issues where it goes into rest mode while working on it and then takes a day or so to recover. Apple store checked it clean and installed Snow Leapord. Is it possible that she needs an 80W cable..I am not sure of the power requirements. Thanks

    Have you tried a known-good Apple adapter with the machine?
    I'd replace the adapter with one from Apple and see if the troubles persist.
    ~Lyss

Maybe you are looking for

  • Using Global variable in Record Group

    Hi, I have a requirement where in I need to pull a column name from a table and then use that value in the select statement of a record group. I have tried using global variables but it is not working. Here is the record group I would like to use. RG

  • Problems with java.lang.Double in a Pojo

    Hi! I'm getting some problems with a Double (wrapper class) in a sub-report related with a Pojo. The exception has more than 100 lines. It's starts with: at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)      at com.crystaldeci

  • Functions in captivate

    Does anyone know what the functions or calls tare o jump to a page in a captivate file. Reason being is that i want to know what they are if I embed a flash file on a page and i need to add a button in that file to nav to the next page in the captiva

  • GPO Template to secure Computers joined to a 2012 Domain

    Hi, We are looking to implement a "Quarenteen OU" for new machines that join our domain.  I've found out how to change the behavior of assigning machines to a different OU than the Computers OU using the redircmp command.   Does anyone have a good "t

  • Learning about forms

    Using Classroom in a Book DW3, I built a simple form that takes name, address, email and several other pieces of information but not credit card information (for a room reservation) that I would like to send via email. But the lesson ends without tel