340AP only working as a Survey Client?

I have a 342 AP that will not allow me to set it for AP/Infrastructure mode - it wants to revert to Survey Client at every boot.
It's running 4.25 and 11.07 - what am I missing?

arrgh. Shaun you are 100% right, as you were the first time you told me.
I found this:
When the "Role of Radio Network" is changed to client non-root, the AP Installaion Key is sometime removed and to change the role back to AP-root is not possible.
The product must be RMAed to resolve the issue.
AT
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCdu15899&cco_product=Cisco+Aironet+340+Access+Points&fset=&swver=&keyw=svp
Now I have to figure out how to get an RMA for an old, product purchased used. Any help?

Similar Messages

BPC Report emails only work from server (not client) - BPC v5.1

Hi all.
Hope someone might have seen something like this before.
Basically, I setup our servers to send email from BPC about 3 weeks ago.
(NB - If it makes a difference, we use Lotus Notes via a Domino server)
The SMTP settings are all correct in BPC WebAdmin, the servers have been added to the allow list on the mail server and the port is open.
Anyway, when I try to send mail from a client (using the Offline Report Distribution Wizard), I get the following error:
"The transport failed to connect to the server".
At SAP's suggestion, I ran a test by installing Office and a BPC client directly onto the Web Server.
When I ran the wizard from the server, the email sent perfectly.
The problem I have now is that although I informed SAP of the test outcome, I haven't heard anything back in about 3 weeks, and I really need to get the reporting email system up and running properly.
Does anyone have any suggestions on what could be causing this?
It's as though the system is telling the client to send the email itself, via the forwarding server, but this would mean allowing every user PC to access the mail server.
Hope you can help, but thanks for looking either way.
Craig

Hi Ludovic
The problem turned out to be mail server white-lists, due to the way that BPC sends emil.
Although you setup the email account/profile on the server, it actually sends from the client PC of whichever user makes the email request.
Our system is only configured to block all email requests with individual exceptions (ie a White-List).
It needed the PC of every user who would need to send email from the BPC system to be added to the white-list.
This is why it worked from the server, as we had added the server address to the list as part of the testing.
Not reall y a BPC problem, more of an issue with functionality due to the method that it uses to send the messages.
Hope that helps
Craig

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

SAP NetWeaver 7.01 ABAP Trial Version - You can only work in client 001

Hi BI Experts,
I have installed SAP NetWeaver 7.01 ABAP Trial Version and I could successfully login into the system.
When I run RSA1 Tcode I am getting error message You can only work in client 001. Can some please advice.
I appreciate all your input.
Regards,
OSR.

Hi,
Since BI tables are cross-client, BI can work only in one client. By default BI is configured for client 001.
If you want it in different client, you change it in BWMANDT field of RSADMINA table.
hope it helps.
Regards,
Pruthvi R

Including image in SharePoint survey answer and hiding elements only work on the first page

Hi All,
I would like to add some text/remove some text etc on a sharepoint survey page.
Which i have done using jquery/jscript.
But unfortunately it only works on the first page.
Any ideas how i can get it to work on all the pages?
See a sample here on how you can add the scripts:
http://sharepointkings.blogspot.com.au/2011/05/include-image-in-sharepoint-survey.html
Cheers

Hi Patrick, does the first page use the same ASPX file as the other pages? If not, you will need to add your jquery/jscript to the other page as well.
Dimitri Ayrapetov (MCSE: SharePoint)

Fresh BW Installation : You Can Only Work in Client 001

Hello All,
I am doing a BI 7.4 installation.
Till now i have just installed NW7.4 ABAP system. I did some of post processing steps after installation like STMS, SGEN.. etc.
We want to have client 100 for BI usage. So i created 100 client with client copy with SAP_CUST profile.. is this corrrect ?
Now i have 2 question..
1. When i run RSA1 in 100 client, I get error "You Can Only Work in Client 001" ? Did i performed wrong client copy ? What is correct procedure. I do not find anything in Installation guide for NW.
2. I need to deploy BI_CONT addon. I can do this with SAINT.. is there some post activity.. which activate something ?
best regards
ashish

Hi
1. When i run RSA1 in 100 client, I get error "You Can Only Work in Client 001" ? Did i performed wrong client copy ? What is correct procedure. I do not find anything in Installation guide for NW.
Kindly refer the SAP Note 316923 - Termination of program RS_CLIENT_COPY_BW
2. I need to deploy BI_CONT addon. I can do this with SAINT.. is there some post activity.. which activate something ?
Kindly refer the SAP Note 153967 - BI Content Release Strategy
1808103 - BI_CONT 737/747 SP04 and higher: Information on Add-On SPs
1808103 - BI_CONT 737/747 SP04 and higher: Information on Add-On SPs
BR
SS

ERROR : You can only work in client 900

Hi,
There are 2 clients in the BI environment.
Client 200 & Client 900.
Client 900 is used for testing.
Client 200 is used for development environment.
We are able to use Client 900 without any problem.
But when we login in client 200 and execute t-code RSA1"
following error occurs.
"You can only work in client 900
Message no. BRAIN009
Diagnosis
Your SAP BW system can only operate in client 900.
Procedure
Log on in client 900."
Can someone suggest solution for this.
rgds
Prashant

hi,
check oss note 522569-BW: Working in several clients (especially APO 4.x/SCM 4.x)
and thread
Re: Is it posible to work with multiple clients in BW?
hope this helps.
522569
Symptom
You cannot work in several clients in the BW system or in a system that uses BW as a basis (for example: APO Demand Planning).
Other terms
MANDT, client, source system, APO, SCM, ERP, Bank Analyzer
Reason and Prerequisites
In BW, master data IDs and dimension IDs are taken from number ranges. The BW objects against which the number range intervals are client-specific are cross-client objects. As the IDs must be unique, these may only be determined in one client. This means that BW can only operate in one client.
The BW objects are cross-client. They can be accessed and changed to the same extent in all clients. BW is displayed identically in all clients. In particular, there is only one Myself source system as this is used to generate the change log for ODS objects. Therefore, when the Administrator Workbench is started, the system checks to see whether you are working in the same client in which the Myself source system was created.
Some extractors from the APO system only work in the client in which the data was created (this is due to the fact that the LiveCache is used). As the Myself connection does not change the client, the extraction of this data must be started in the same client in which the APO data was generated.
For more information about client-dependencies for SAP APO and SCM 4.x, refer to the paper "SAP APO 3.x & SAP SCM 4.0 Multiclient Capabilities" in http://service.sap.com/scm -> mySAP SCM Technology -> "Installation, Upgrade, Migration, System Copy, Client Dependencies". The direct link for the paper is: http://service.sap.com/~sapidb/011000358700006688312002.
Solution
Particularly in SCM/APO it can make sense to use several clients for BW in the SCM/APO system, because the SCM/APO Customizing is client-specific. CAUTION, this note only applies to SCM Releases as of 4.0. For Releases below SCM 4.0, see note 384057.
In SCM as of 4.0 (BW 3.0), it is possible without a BW modification to log on in several clients and to also use the BW functions in these. In addition to this note, you must also take some restrictions and other information into account. This information is maintained centrally in the paper mentioned at the beginning of the note.
BW 3.0B
           Import Support Package 2 for Release 3.0B (BW3.0B patch 02 or SAPKW30B02) into your BW system. The Support Package will be available once Note 493971 "SAPBWNews BW 3.0B Support Package 02", which describes this Support Package in more detail, has been released for customers.
Proceed as follows:
The default client must still appear in the BWMANDT field in the RSADMINA table. Under no circumstances must this entry be changed. Otherwise it may be impossible to use the data in all InfoCubes and all master data tables. Numbers are taken and only created in this client.
Using transaction SM59, create an RFC destination for this default client with the following attributes:
RFC destination (name)
Connection type:         R/3 connection
Client:                  Default client from the RSADMINA-BWMANDT table
The connection must have a password or it must be set as a Trusted System. It must be possible to log on using this connection without additional passwords being requested.
Enter this RFC connection in the BWMANDTRFC field of the RSADMINA table.
When you work in different clients, you must take the following restrictions into account:
BW releases lower than 3.5
BW does not support the connection of new source systems (also file source systems) outside the BW standard client. Only one "myself" source system can be created.
It is considered possible to connect a client other than the BW standard client to an external BW as a source system. Although you can do this using note 609167, this involves restrictions that are mentioned below in the "BW Release as of 3.5" section.
Proceed as follows if you want to upload data into your new client (also ODS update and file source systems). This is not valid if note 609167 has been implemented):
                     In your new client for all source systems, from which you wish to upload data into non-BW standard clients, create partner connections as an IDENTICAL copy (including names) of the partners in the BW standard client. If you are setting up the new client for the first time, you can use the client copier (transaction SCCL).
                     Create the BW background user (generally, BWREMOTE) with the S_BI-WHM_RFC and S_BI-WX_RFC profiles. Make sure that the name is the same as the name in the BW standard client.
BW releases as of 3.5
BW does not support the connection of new source systems (also file source systems) outside the BW standard client. Only one "myself" source system can be created.
The Administrator workbench can only be called in the BW standard client.
You cannot upload data into a client other than the BW standard client.
                    As of BW 3.5 with PI BASIS 2004.1 or higher, you can connect another source system besides the BW standard client as a separate source system to BW (extraction from another client within the system), provided the BW standard client and BW background user have been entered in the Myself destination. See note 538052.
Authorizations/roles
Like users, authorizations are also client-specific. If you work in several clients, you must ensure that the necessary authorizations and roles exist in the other clients.
Client copy
No client copy may be performed in the BW standard clients. This would destroy the versions of the number range intervals and thereby make the BW data inconsistent.

You Can Only work in Client 001

Hi Gurus,
I Installed ABAP Netweaver successfully, and i tried to connect to BW workbench using Transaction RSA1, i get an error message which states that "You can only work in client 001", Please how do i solve this problem. i need a detail step by step in solving this problem because i am a beginner.
Regards
Gabriel
[email protected]

hi
You can also try this
You need to make client XXX as your default login client. For this change the value of profile paramter login/system_client accordingly in RZ10. Further execute the function module RS_MANDT_UNIQUE_SET in SE37 with value of i_mandt being set to client XXX (in general the client where you want to execute this transaction).
regards
Jameel

RSA1: You Can Only Work in Client 001 issue

Dear All,
I am having SAP NW 7.4 SR1 as abap system ,I have created one new client ,while runnning RSA1 t code i ma getting below message
RSA1: You Can Only Work in Client 001...
I have cheked below
1. Go to Transaction SE16, and enter table RSADMINA
2. Change the BWMANDT field entry to the client number you wish to use
above is the solution for this issue ,but i ma unbale to chnage the client in se16
here chnage option is gayed out.
Please suggets is there any alternative for this
Thanks

Hi Basis,
Please follow below steps to edit.
SE16n---> Enter table RSADMINA ---> Provide /h on command field --> press F8 key --> On the screen provide two inputs GD-EDIT & GD-SAPEDIT with value X for both & click on change icon.
After that press F8 key again,now you'll be able to change the things.Please follow same for other table,if you want these tables under change mode.
Regards,
Gaurav

You can only work in client 000, Message no. BRAIN009

Hi Expert,
when i go for Information Systems > Business Information Warehouse > Business Explorer > Modeling > RSA1 - Administrator Workbench: Modeling
You can only work in client 000
Message no. BRAIN009
Diagnosis
Your SAP BW system can only operate in client 000.
Procedure
Log on in client 000.
Reg,
Rahul

Hi,
You cannot work in client 000, so have to change the client to your required client.
Do the following to change the client.
Step 1: Log on to sap system with your new client.
Step 2: Goto T-Code se11
Step 3: Goto Table "RSADMINA"
Step 4: Select Contents(CtrlShiftF10)
Setp 5: Execute it.
Step 6: Double click on the report (Eg: Bw )
Step 7:In "BWMANDT" field give your client and save.
Reward points if useful
Regards,
Rakesh

You can only work in client 000.-RSA1 issue

You can only work in client 000.
I am not able to run transaction RSA1 in my Production system.
Do I have to change some settings in SCC4.
Advance thanks

Hi,
Is yours a new system. Then take a look at this
You would need to create a new client as a copy of 000 as you cannot work in client 000. Refer to the Installation guide.
Also refer to OSS Note:116811.
Check this link:
Re: client creation
Re: BW can have multiple client?
Bye
Dinesh

Message 'can only work in client 001 during data transfer

Hello Experts,
Recently I setup a interface between ECC and SCM system for EWM, my data transfer was working fine until last couple of days when I getting this error message on the SCM side.
Message in CFM2 comes up as
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text: You can only work in client 001
And not sure why because I have not made any changes to settings.
Can someone please suggest what might be going wrong and what needs to be done?
Thanks
Bhaskar

Hi Bhaskar,
I have not worked on EWM, and don't know if CIF connectivity is used differently.
But let me try to propose a general way forward based on your error message.
It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
Check out the following:
1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
Let me know the results of your checks, and if this helps you in finding out the root cause.
PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
Thanks - Pawan

DHCP only works for wireless clients on Time Capsule. How to fix?

Hi All,
I have a question concerning the DHCP server on my Time Capsule. I'm posting here because I think you network pros lurking in this forum probably have way more insightful advice than the n00bs in the Time Capsule forum
My DHCP server on the Time Capsule only works for clients connected wirelessly to that specific access point; clients plugged directly into the network via ethernet and through other APs do not receive a DHCP assignment from the Time Capsule.
How can I get the Time Capsule to serve DHCP addresses to EVERYONE on the network, not just clients connected via the Time Capsule?
Thanks,
Chris

I don't know that TC provides that. Switch the TC over to its bridged mode (also known as an Access Point or AP), and run a DHCP Server on Mac OS X Server (fodder for this forum) or a DHCP server on another available device. Less desirable though feasible (so long as the IP address pools are coordinated and non-overlapping with other pools or static addresses), run multiple DHCP servers.

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

InDesign CS5.5 Exporting PDF master page hyperlinks only work on first 2 pages

We recently upgraded from CS5 to CS5.5 and now our hyperlinks that go to different pages in the PDF only are working on the first 2 pages of each document in the book. We have about 30 documents wrapped up in a indesign book. On the master page we have hyperlinks that allow users to quickly go to the index in the back of the book. After the CS5.5 upgrade the hyperlinks only work the the first 2 pages of each document. We export to PDF(print) with hyperlinks enabled.
I have tried the below:
- I have tried 2 different computers
- Deleted and re-created the indesign preference file
- deleted and re-created the hyperlinks

Can you recommendd the best way to manage the following:
I'm on a Mac. Created an enewsletter for a client in Indesign CS5 with 7 "click here"s throughout the document. The hyperlinks are to connect w other PDF documents not URLs.
Where will I have the best luck creating the hyperlinks - Indesign or in the PDF I export? I have Acrobat Pro if I need to create the hyperlinks in the PDF.
Except I can't figure out how to create the links in either program as far as what name to designate and where do the PDFs reside so people can link to them? And do I enter the file name of the PDF connected to the particular "click here."

340AP only working as a Survey Client?

Similar Messages

Maybe you are looking for