35 mm & 16 mm films... how to capture and export?

Ok, I shoot a lot of stuff at school on 35mm and 16mm, then get it telecined to a dv tape...
What is the best way to capture the footage into my computer so I can keep the great picture quality (or, what is the best setting to use since I only have a consumer camcorder at home)?
Then...
What are the best export settings to ensure that I keep the best quality I fought for in the above question?
Basically, I shoot some stuff, edit it, and play it back in class and it looks a thousand times worse than it did on the telecined dv tape...and I want to know how to keep that great image.
THANK YOU SO MUCH!

Shooting on 35 and 16...guessing you are in film school. Chapman? Aren't your professors helping at all? I mean, you are shooting 35mm! That ain't cheap.
Telecining to DV tape? 35mm? Oh, the horror. Well, we telecined 16mm to 3/4"..far worse. And economics and all.
BEST would be to telecine to D5, capture as DVCPRO HD for offline, then as 10-bit uncompressed HD for online...with the use of a Kona 3 capture card and a SATA Raid...but then we are talking bucks here.
If you telecined to DV, simply capture as DV/NTSC. That is the best you are going to get with that format...which ain't great. If you could telecine to DVCPRO HD (if your school had that deck) then that would be MUCH better. But working DV/NTSC would be your best bet.
Shane

Similar Messages

Capture and Export of Mono Audio in FCP HD

I have just upgraded to FCP HD from FCP 3. My problem is all of my audio needs to be Mono only. In v3 this was simple I just chose Mono from the capture settings and Mono for Export.
On FCP HD I can't find any way to capture and export as Mono. When I record Voice Over in FCP all I get is the right channel and even when I set it to pan centre it still only comes out the right speaker after export.
If I've got to manually duplicate tracks everytime it will take me forever.
Anybody know a simple way to capture and export Mono only (the same for both Ch 1 + 2)
G4 DP 1.25 Mac OS X (10.4.6)

This might seem the long way 'round but it may save a ton of time in the end.
Do your FCP mix in stereo as Colin suggests, then take the final audio track into STP or Peak and do a "mix to mono" and then save a new AIFF file with the resulting mono clip.
Then bring that back into FCP on a new audio track, line it up with the stereo, then either disable or delete the stereo tracks. This will give you a true mono audio track.
But where are you going with this content that will handle mono audio? DVDs require a stereo AC3 files. Are you sure you really need a mono sound track?

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

How to import and export the screen parameters

hi all
how to import and export the parameters of the screen
i need to export all the parameters and then import it
and also how to export and import a variable to the memory
thanks and regards
naval bhatt

Hi,
Check this example for exporting and importing to memory..
DATA: V_VALUE(2) VALUE '2'.
EXPORT V_VALUE = V_VALUE TO MEMORY ID 'ZTEST'.
IMPORT V_VALUE = V_VALUE FROM MEMORY ID 'ZTEST'.
Thanks,
Naren

Audio Q: How to capture and play back later?

Hi,
Looking at the JMStudio app, it's pretty clear how to capture audio and stream it out through the speakers. What I don't understand is how to capture audio, stop, and at a later time, play that stream back. In particular, I'd like to be able to play it back beginning at a specific position. I see the Positionable interface, but I haven't found any demo code for a DataSource that implements it. Any help appreciated,
+scott

Hi,
you have to stream your media to a file and later re-open it. To do this, simply get a DataSink and use it to save on a file.

How to capture and upload the captured video?

Hi All,
Please help me to capture and upload the captured video to
the remote server, so that other visitors can view that video. Any
sample or related web linke will be appreciated.
thanks

Please refer to the section of "Uploading Extended SAPUI5 Application" and also appendix section in my document @
HOW TO ENABLE MULTI-ORIGIN CAPABILITY IN SAP FIORI APPS
also check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108506ff-6479-3110-70a2-e888421ea896?QuickLink=index&…
thanks
Ashish

How to capture and save voice from microphone

I'm beginner to JMF. I want coding for capturing and saving voice from microphone. Plz anybody help me.

http://javasolution.blogspot.com/2007/04/voice-chat-using-java.html
http://www.vsj.co.uk/java/display.asp?id=370

Any Complete Tutorials On How To Edit And Export MIDI Files In GB?

Hi. A friend sent me about 25 nice standard MIDI files that all open fine in QT Pro. She wants me to drag and drop them into GarageBand 2, attempt to edit them, change sounds and then export them out as the edited versions, key changes, added bars, change instrument sounds, etc,. Although I'm a trained musician who understands form, I really don't have a clue on how to use GB to edit and export standard MIDI files. Can this be done effectively in GB ver 2 or 3?
Basically what she then wants to do is take the edited MIDI tracks, put them into itunes I guess on her iBook G4 or Ipod and do a solo act playing her keyboard live and usibg the MIDI tracks as background.
Are there any links to step by step tutorials on how I can lerarn this procedure? Please offer any advice and links if you can and thanks for your help
steveb

Not really practical, I'm afraid. Capturing screenshots and cutting them up is possible with Photoshop, but PDF editing is very limited (fix a typo, move a picture).

How to create and export a sharepoint list connection file to excel connection file library from power pivot?

Hi All,
I'm new to SharePoint and Power BI.
I've to use share point 2013 lists to create power view reports. For that, I need to create Power Pivot in Excel 2013.
I'm fine with the above. We normally take a data feed of a list and create connection to that. We need to create a connection file (.odc) and export it into a excel file connection library of Share point. The connection to be made to share point list. The
power pivot will be having multiple related lists.
How can I create a connection file which is referring to share point list
Please suggest.
Regards,
Julie

Hi All,
Finally, I could find the answer for this question after a long search.
First of all, open a new excel file in server.
Data-->From other connection-->From data connection wizard-->data feed-->Location of the data feed-->
http://sharepointsite/sitename/_vti_bin/ListData.svc
-->next-->select the lists which you need-->next-->only create connection-->properties--->export connection file
-->ok
The connection file has been created and .odc file exported to the specified location.
Open power pivot and check the connection in existing connections.
Exported file has to be uploaded in Excel file connection library of share point 2013. So that you can refer the same in this excel file when you upload it into share point.
Regards,
Julie

How to create and export a still frame from a movie in iMovie 09

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
*To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
*If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
*If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
Note: If you do not have a right mouse button, then control-click will work instead of right-click.
This is the 1st version of this tip. It was submitted on Dec 5, 2009 by AppleMan1958.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

First, click iMovie/About and see which version you have.
Versoon 9.0.2 would be iMovie 11.
Follow the instructions [in this post|http://discussions.apple.com/message.jspa?messageID=13065602#13065602]
If you have Version 8.0.6, that is iMovie 09 and you should see the Reveal In Finder option.

Why XMP Files on Capture and Export

Just curious to know what is the purpose of the 'xmp' and 'xmpses' files that are created when I export from Premiere for DVD encoding.
And I might as well ask the same for the xmp created from captured video files. Are they necessary for editing? Can I put them somewhere else or delete them?

From the new user reference:
Media preferences
Indeterminate Media Timebase Specifies the framerate for imported still-image sequences.
Timecode Specifies whether Premiere Pro shows the original timecode imported clips, or assigns new timecode to them, starting at 00:00:00.
Frame Count Specifies whether Premiere Pro assigns a 0, or a 1 to the first frame of an imported clip, or assigns a number by timecode
conversion.
Write XMP ID To Files On Import Check this box to write ID information into XMP metadata fields.
Enable Clip And XMP Metadata Linking Check this box to link clip metadata to XMP metadata, so that changing one changes the other.
Growing Files (CS6) Premiere Pro CS6 supports growing files for OP1A MXF files. The preference allows users to opt whether Premiere
automatically refreshes as they grow, and if so, how frequently. This preference allows you to with these files in your project immediately.

How to find and export all Scheduled Tasks in Domain with multiple servers.

Hi everyone,
I have been given a task of finding all of Scheduled Tasks in the Domain on all of the servers. So far I have manage to create a script that will pull out all Scheduled Tasks from one Server, in this case Domain Controller.
Butt in my company are more than 150 servers so I am looking for a script that can connect to AD (or LDAP), than to certain OUs, then pull out Server list and than query them for Schedule Task. I have found already some scripts online and tried to adjust
them butt they simply didnt work.
I am new in the company and still learning about the system, this is my first real task so any help will be greatly appreciated.

Just a tip that I found after running across this myself - if you run a
Get-AdComputer -filter {operatingsystem -like '*server*'} | ft name | out-file servers.txt
and then save the output to a text file, it may look good, but there may be white space at the end of the computer names. Make sure that only the computernames are in the file and then the script works great.
http://absoblogginlutely.net
This would happen because you are trying to get around the format of the output. When you want the raw value do it this way; it is faster and easier:
Get-AdComputer -filter {operatingsystem -like '*server*'} |
%{$_.Name } | out-file servers.txt
Now there can never be any extra spaces and there will be no header to cause problems.
This is why it pays to spend time studying the details of how PowerShell works instead of just sticking things together until you get a result. PowerShell is designed to do all of these things without fudging or guesswork but it requires that you actually
learn how it works. I highly recommend stating with a good technical book on PowerShell.
¯\_(ツ)_/¯

How to fill and export a table from a FM

Hi!
I'm using the function builder, and want to export a table which is filled in the FM.
This is from the header in my FM:
EXPORTING
*" VALUE(T_RESULT_EXPORT) LIKE ZT_RESULT STRUCTURE
*" ZTKG_RESULT
I have the parameter name for a table T_RESULT_EXPORT in the Export section. How can I fill the table with data? I get an compiler error saying "T_RESULT_EXPORT is not an internal table - the OCCURS n specification is missing".
All I want to do is filling my export table.

adding to the above,
if u want to still use it in export section.
declare ur
internal table like this.
data : T_RESULT_EXPORT LIKE ZT_RESULT occurs 0.
then
pass T_RESULT_EXPORT in the FM
rgds
anver
if hlped mark points

How to connect and export specific schemas in SQL plus

Hello,
Wanted to clarify on a few things.
- Can an Oracle 10g Release 10.2 client be used to connect to a oracle 10.1 database?
- Is there an option to "connect" (not refer) to a specific schema, say "SchemaA" in SQL plus in order to run a specific sql code on this schema alone?
- How can we export a specific schema as a dump file in SQL plus-what is the syntax? Assuming username=U;password = PW; Database=DB and schema = Sch
Thanks a lot.

- Can an Oracle 10g Release 10.2 client be used to connect to a oracle 10.1 database?
Yes. O10gR2 client can be used to connect all version of Oracle instance.
- Is there an option to "connect" (not refer) to a specific schema, say "SchemaA" in SQL plus in order to run a specific sql code on this schema alone?
connect ShcemaA/pwd@hoststring.
for e.g.
connect scott/tiger@oradev
conn scott/tiger@oradev
- How can we export a specific schema as a dump file in SQL plus-what is the syntax? Assuming username=U;password = PW; Database=DB and schema = Sch
Export can be done on Command promt not on SQLPLUS prompt.
try the following to know all the parameters and usage of exp command.
c:\> exp help=y
exp scott/tiger FILE=scott.dmp OWNER=scott GRANTS=y ROWS=y COMPRESS=y

How to import and export Oracle 10g XE in Ubuntu

Hello everyone,
I'm a Linux (Ubuntu) user, I need to import my *.dmp* file in Ubuntu.
Can someone help me, how can I do this and also how can I export?
Thanx in advance.
Talha

Hi,
These might help
https://help.ubuntu.com/community/Oracle10g
http://www.debian-administration.org/articles/430
http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html
http://www.oracle.com/pls/xe102/homepage
You need set environment variables correctly
This might help with that and some other minor things
http://ubuntuforums.org/showpost.php?p=7838671&postcount=4
And XE comes with Apex version is 2.1.
You can upgrade it
http://www.oracle.com/technology/products/database/application_express/html/3.2_and_xe.html
Get SQL Developer, it is nice tool work with database
http://www.oracle.com/technology/products/database/sql_developer/index.html
Br,Jari
Edited by: jarola on May 3, 2010 12:37 PM
links corrected

35 mm & 16 mm films... how to capture and export?

Similar Messages

Maybe you are looking for