350 Bridge WEP Security

I have a 350 Bridge to Bridge configuration.
Root Bridge & Non-Root Bridge W/O Clients
I want the communication between these (2)
bridges to be secure.
How do I configure WEP?

Here is where I would suggest starting
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/index.htm for wireless bridge configurations
to set up wep look under security setup section
best of luck It should be pretty straight forward
PS
make sure you have bridge's set to root without clients and non-root without clients if only using wep in a point to point

Similar Messages

Can no longer use WEP security on my G3 clamshell

This morning I updated OS 10.3.9 with the security update that was just released and now I have to disable my WEP security. What happened? My G5 still works fine with my Airport Extreme base station
G3 ibook Mac OS X (10.3.9)

Still hoping for some help. After updating Panther with the 2006 02 security update, I can no longer connect to my wireless network with WEP security activated. Internet Connect finds the network, and Airport is turned on, but it just spins and I have to do a force quit. I have the network and the base station passwords in my keychain, so it doesn't ask for them. My G5 hooks in fine. As soon as I turn off WEP security, resetting the base station from my G5, the G3 ibook connects automatically. I went to a lot of expense to upgrade this old iBook (Panther, airport card, new battery, upped the ram to 320 megs) and Apple suppposedly still supports it with Panther. I really don't want to be providing internet access for the whole neighborhood.
G3 ibook Mac OS X (10.3.9)

Can't select WEP security setting.

Hi, I just set up a DPC3825 router, and I wanted to use WEP security settings so my DS Lite can connect to the internet, but it appear the only options in the Wireless > Wireless Security dropdown list are :
WPA-Personal
WPA2-Personal
WPA or WPA2-Personal
Disable.
Anyone know what's going on?
Solved!
Go to Solution.

hi janderbar
My Apologies. The DPC3825 is being handled by the Cisco Small Business Support Community.
For discussions about this product, please go here.

Using AX with Linsys router and WEP security

I have a Dell Inspiron 700m running XP. I use a Linksys wireless router for internet access. I have configured my AX to connect to the router and, with the WEP security turned off, it worked fine. However, when I turned WEP back on, reset the AX, and tried to configure it as a client to my wireless network, it didn't work. Rather, I could not connect to my wireless network, and can only connect directly to the AX network. Any suggestions?
Thanks,
Tom
Dell Inspiron 700m Windows XP

One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Having said that, this will only work if they use an algorithm, some don't and in these cases you must use the HEX key regardless of the length of the plain text password.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
iFelix

Aironet 350 Bridge associations

Hi,
I have 2 aironet 350 bridges that keep disassociating and then reassociating constantly. Is there any way to stop this form happening?

Parent is "Root Bridge", end station is "Non-root bridge w/out clients." Thanks for pointing me to the Express setup page--that's the one I had in mind, but I haven't been there since day one. Now I need to figure out why, with those settings, it's allowing client connections...
The only MAC address filtering I see is (per documentation) "allow or disallow the forwarding of unicast or multicast packets either sent from or addressed to specific MAC addresses." When I look at the actual Address Filters page, it only allows me to specify "Dest Address." Not much help if I don't want to allow other connections *to* the bridge...
When I'm not in Express Setup, and go to the Setup page, I have the option at the bottom of the page (Network Ports | Bridge Radio or Network Ports | Root Radio) to go to an Advanced page. While there, I see a field called "Radio Cell role." The Root Radio Advanced page shows the Radio Cell role as "Access Point / Root." The other options would be "Client/Non-root" and "Repeater/non-root." The Bridge Radio Advanced page shows the role as "client/non-root." I am *assuming* that the Root radio here, although called an "access point" is not an access point for clients (i.e., its role is that of the access point for the far end(s) of the bridge).
I can't find anyplace to stop broadcasting the SSID...
Thanks for the help!
t

Can't set WEP security, why?

I have a Belkin 54mb Airport Card (seen in Profiler as Airport Extreme) in my Mac running OSX 10.4.8. The card works fine with my Netgear DG834G modem/router but I can't set the security option.
I set the password in the 'Wireless Settings' page re-start after but when I key in the password Airport can't find the network. I then have to reset the modem to factory settings.
Anyone out there using this modem/router who can offer any help?
G4 466 DA Mac OS X (10.4.8) www.ardswe.com

Thanks to those helped, thanks. The problem was this:
When setting up WEP security with this modem, you use the standard 10 digit 'Hex' password, ex 1234567890 but when you assign this password to the Network and Airport on your mac you must prefix it with a dolar sign, (so the pasword becomes $1234567890), apparently the dollar sign forces the Netwotk Prefs and Airport to read the numbers as 'Hex' code, as opposed to just numbers.
Hope this may help others who have this problem.

Cpu load on 350 bridge

Hi,
any idea to monitor the cpu load on a 350 bridge? (snmp, telnet, ..)
Regards
Alex

The following URL may give you a better idea,
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brscg/br350ch2.htm#1015862

Mimo access points with Static WEP security do not allow connection speeds above 54mbps

I am getting this message:
Access Connections - Mimo access points with Static WEP security do not allow connection speeds above 54mbps
If I switch from WEP to WAP i do not get the message but I still only get 54mbps speed. I have a Linksys Wireless-N Broadband Router. Is there a setting that I am missing???

Yes you need to use WPA-AES or WPA2-AES, or no encryption, to go faster than 54Mbps. This is part of the 802.11n spec.
That's not so bad, because if you have the right 802.11n card and use the right settings you can go up to 300Mbps!
What bites is that the 802.11n card which comes with X-Series ThinkPads is the Intel 4965AGN. It does not support the broader 802.11n 40MHz channel width option, limiting the top speed to 130Mbps .
The new ThinkPads based on the Montevina/Centrino 2 platform will most likely use the Intel WiFi Link 5100/5300 802.11n/WiMax cards, which I hope will fix this, coz I'm going to buy one!
I don't work for Lenovo. I'm a crazy volunteer!

WRT54GS2 V1 Will not accept WEP security

I jsut purchased a WRT54GS2 V.1 router and it will not let me set teh wireless mode to WEP secured. If i select it it immediately resets it to Disabled, no matter if im in auto amtic or manual modes. Working as intended or did i waste my money?

It might be the problem with the firmware of the Router....so try upgrading the firmware of your Router...
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

WRT54GS WEP Security Issues

I have used a WRT54GS for a few years with MAC filtering but no other security. A few months ago, I decided to add WEP security. While using WEP security, my wireless connection would go from an excellent signal to dropping randomly. Additionally, internet browsing would be very slow at times to the point of being unusable. When I disabled WEP, these issues went away. What should I look at to troubleshoot this issue?
Thanks.

distance?
What wep did you use?
encryption level/
OS of PC and wireless utility?
"Give them nothing... But take from them everything..."
-Leonidas "300"

Lost connection to TC after activating WEP security on the router

after activating the WEP security my TC could (naturally) no longer connect to the network...
How do I enter the passord in the TC if I can't see it in the AirPort Utility?
Tim

Are you using ethernet to access it, just for the setup??
What nodel are you using? WEP has been removed as option in latest editions I heard.

Windows laptops can't connect to Macbook Pro shared internet when WEP security is on

As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.

I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP

AX WEP Security Problem

I've just pulled my AX out of the closet for the first time in a couple of years. I want to use it as a client on my home wireless network to stream Internet radio over my home stereo system. I've gotten it to work--but only without security on my wireless network. Without security, everything went as scripted. But before that I tried it three times with WEP security enabled and failed each time. I won't bore you with the details, since obviously (since I got it to work without security) I went through the correct procedures. I'll just provide a couple of details here.
* During the setup procedure, everything seemed to be going perfectly until the end.
* During the procedure, I specified WEP security and gave the utility access to my keychain, where it accessed my WEP password. I 'showed' the password to make sure it was correct.
* Setup was successful (according to the admin utility) but after restarting a connection between the AX and the existing network could not be established. The light flashed amber and the device disappeared, inaccessible either directly or through the existing network.
Don't know which WEP this is, but the password is 5-digit hex.
Thanks for your help.
Jim

I want to use it as a client on my home wireless network to stream Internet radio over my home stereo system.
What is the make/model of your current home wireless network's router?
But before that I tried it three times with WEP security enabled and failed each time.
Any reason that you can't use WPA or WPA2, instead of WEP. WEP is no longer considered secure and it doesn't play "nice" when working with different vendor's equipment.
Don't know which WEP this is, but the password is 5-digit hex.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AX will be hashed differently on a non-Apple client and vice versa.

350 Bridges VOIP Setup

Can someone tell me if this setup will work and give priority to Voice?
Building A
350 Bridge
3550 Switch
Building B
350 Bridge
2924 Switch
I will want to prioritize voice over the link between the 2 buildings. The customer will be using an Avaya IP phone switch. There are only about 10 users in building B. If I configure VLANS and QOS on the bridges and the 3550 switch, will this solution work? Thanks

Take a look t the following document tht talks about configuring QoS for Voice on 350 devices, my be this will give you a better idea.
http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008007f770.html#26726

C4580 Wireless Networking Issue - WEP Security Key not accepted.

I keep getting this error whe doing network setup on my new Photosmart C4580.
"Your wireless rounter requires a WEP secuirty key. The security key configured on your printer does not match exactly. Reconfigure your wireless network WEP security key for your printer."
I have downloaded an updated installer. I have tried to access the printer via the IP address to make the change. It is never updated. When I run the Wireless Network Test Report it also shows it fails. I am entering in the first WEP security key (Index 1). I know the key is being entered correctly. I have even copied and pasted it. Nothing works.
Help Please!

Jim:
Thanks for your comments. I think you may be right. I have more information now. I installed a later version of the C4500 package (to fix another problem where the PC Firewall and internet access was disabled for 3 mins at startup), and the network setup/diagnostics are different in the newer package. After installing this the first time, everything worked - I mean everything, even scan from printer. During the Network Setup the wizard found only one network (mine). However, the Wireless Network Report said it had detected two.
However, the next time I switched the printer on, it never connected. Network diagnostics then told me that the PC and the printer were on different networks, 192.168.0.0 and 169.254.0.0 and that this usually results from two close networks with the default router manufactures SSID. This is not the case here - I am in any case in a very isolated country farm! It also (predictably) said the WEP was wrong. At one point in the diagnostic I can see it's trying 169.254.196.213. There's nothing on my network other than 192.168.0.* Attempts to reconfigure the network again show that there is only one network detected on-air, and no duplicate SSIDs, but the same result in the diagnostic - crossed-networks. Even re-installing the software won't fix it now. Whereas before I could at least print/scan from the PC and only the printer 'thought' the network was dead, now the network really IS dead and I am left with a USB-only setup.
I think you may be right that the printer somehow 'remembers' a phantom/ghost network. What I need is some way to hard-reset the printer. I saw in other postings that you know something about this, at least on other printers. Alternatively, I need a way to set the printer network parameters, including hard-coded IP address, over the USB but WITHOUT the router radio on, then switch it on and let the HP network setup wizard find it over the radio. Any ideas on that one please?
Peter M

350 Bridge WEP Security

Similar Messages

Maybe you are looking for