3500 update failed and now off
i tried to update my nokia 3500 by nsu to the latest firmware 7.00 the dowloading completed but when its start updating and the phone driver change to
1-Nokia BB5 ADL Loader USB Phone Parent
2-Nokia BB5 ADL Loader USB Genric
an error apeare
sofware update failed
1-for optimum connectivity ......etc (((check the usb)))
2-nsu has attempted ......etc (((check the net or firewall))
and the phone now stop working but still the driver on the computer as
1-Nokia BB5 ADL Loader USB Phone Parent
2-Nokia BB5 ADL Loader USB Genric
1-i remove the battery and return it back and
2-re install nsu
3- restart the computer
nsu detect the mobile and start updating again but stop in the same point
please help
If the phone will no longer turn on or complete the update then all you can do is take it to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.
Similar Messages
-
My update failed and now my phone is frozen with the apple symbol
I was updating my iPhone and it failed and now my phone is frozen with the Apple Icon. It wont turn off or anything
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
HP laptop update failed, and now it wont stop undoing changes.
When I went on my laptop today it started updating, and after an hour when it finally got to 99% it said they the update failed, and it's now undoing changes. It's been like that for over 3 hours now. How can I try to fix this?
You can try getting to Advance Boot Menu by
1. Repeatly pressing f8when the laptop boot up (Disable FASTBOOT when you are tyring to get into Advance boot menu)
2.Shift and F8 (When the first options doesn't help at all )
then use the Keyboard arrow keys to navigate around Advance boot menu and select Last known good boot configration or restore this PC (Please be minded that if you choose restoring it will restore to a back to the last known backup , as data will be lost )
Please update here if there is still any problems -
Iphone update failed and now it's not recognized in itune at all
itune prompted the latest update. 4.3.x (not sure)... so I follow the prompt and did the latest update...
Well, it failed to update correctly and now my phone is not working at all. All I see on the phone is the itune icon with the USB port connection image on it...
itune won't recognize the phone on it's device list either.
this is very frustrating... it happen to me last year with the first iphone4 i had and it's now happening again after the second one...
HELP!!Hi,
See These Links:
http://support.apple.com/kb/HT1808
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
Device Frozen
http://support.apple.com/kb/ts1445 -
Update failed and now big problems
Son updated his iPod touch a few hours ago and now it continues to turn itself off and on repeatedly. Tried to restore the iPod but iTunes says it is unable to due to a missing disk. Help!
Check this article:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod -
Please can anyone help? tried to update my itunes and now can not access at all and now have error message cant access as file MSVCR80.dll is missing from computer and then a further message error 7 (windows 126) . laptop and i tunes working perfectly before the update. I have tried unstalling the itunes programme and re installing but still the same error message .
both my i pads and i pods are still ok its just the i tunes.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
8820 v4.5 update failed and now nothing
I used the online system software update utility didn't everything right, rebooted my computer and now my 8820 does nothing but flash 2 red pulses. Can't turn it on, won't connect to my computer. Please help!!!
You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Tries updating iPhone 4S with iOS 6, update failed and now phone stuck on itunes logo
So i tried updating my iPhone last night to ios 6. Soon after the update began, iTunes said an error occurred and the installation stopped. now my phone is stuck on the itunes logo with a usb plug under it. I have tried everything i know of. turning the phone on and off/trying the reset thing with the power/home button does nothing. plugging into the wall does nothing. when i plug the phone into my computer, the sound of a device being connected happens, but iTunes does not recognize a device. no message pops up about a device in recovery mode or anything. I uninstalled then reinstalled everything apple-related, did not fix the problem. I'm not overly tech-savvy, but if anyone has any suggestions, lemme know please. ive spent well over 5 hours trying to fix this thing to no avail
OK i figured it out. you have to put it in DFU mode before itunes will recognize the phone.
instructions: http://www.iclarified.com/entry/index.php?enid=1034 -
N73 UPDATE FAILED AND NOW THE PHONE IS DEAD
I started the software update but when it was almost at the end the connection broke down and the phone it was turned off. Now it won't turn back on. What is to be done? Please help me!!!
take your phone to the nearest nokia centre, as long as it is within warranty then they should be able to fix it or replace it, because as i beleive it is nokias fualt for creating insecure software that is unstable and should not even be made public if it kills phones.
-
Nsvcr80.dll is missing....and Error 7 Window Error 126....please reinstall itunes...are you freaking kidding me!!!!!!!!!!!!!!!!!!! Have you just lost all my playlists, video's and work over the past several years????????????????
All I did was follow your updates and install now window!
How is it that itunes doesn't pop up with a quick link to the correct their error!
So now what? Please advise.Yes, I know King-Penguin....I'm just so frustrated and in a panic, that I was hoping the itunes geeks that sent out this falilure of an update would still see it, and feel bad. And maybe even send out a quick link fix it botton. Guess that's just a newbie way of thinking!
Thank you for the reply with the fix it suggestions....I'm feeling a little less paniced now. I really appreciate your response.
I assume from reading some of the posts that all the songs etc won't be lost when I reinstall? -
I phone update failed and now stuck on connect to itunes but it wont connec
I have the latest version of Itunes. I clicked update iphone to some .1 version of software and it was unsucessful. Now my iphone will only show the screen that says I need to connect to Itunes(the one with the cord with the arrow pointing to the itunes logo). I have reset the iphone. Nothing is working and I cant call for help.
This worked!
Nothing worked until i finally went to 8.1.10 FIRST. I had this same problem last week, updating a customer’s 3G to 3.0 from 2.2.1, on a MAC (using iTunes 8.2.1)! I tried on 2 different macs, 2 different sync cables, a bootcamp Vista SP1 on my MBpro and then XP pro SP3. All registered a 1602, 14 or 16 error everytime, about halfway through the update on the iPhone. I also tried removing the old 3.0 update and prefs file from the user data > app > apple directories with no luck. Also tried reinstalling itunes on the Mac.
What finally worked was:
uninstall itunes (if you have anything above 8.1.10).
move your itunes library file (for windows, it’s located under the iTunes directory, usually called iTunes Library.itl). You want iTunes to create a blank file since your 8.2.1 upgraded itl file won’t work with 8.1.10.
put your ipod into DFU mode
restore your iPhone to 2.2.1 using iTunes 8.1.10 (go here to download older versions of iTunes)
use the same site above to download 8.2.0 (not 8.2.1).
install 8.2.0 and connect your iPhone. It will notify you about the update. Download & install the 3.0 update (if you uninstalled, the 3.0 update should be deleted).
upgrade back to 8.2.1
move your library (itl) file back. To be safe, I would hold the shift key down to select your 8.2.1 file (even if it’s named the same as the one you created from iTunes 8.1.10).
1 hour later, I have everything updated. All I can say is that there’s a bug in 8.2.1 that wasn’t there in 8.2.0. I updated my iPod Touch first gen no problem with 8.1. Hope it works for others.
iPhone 3G iPhone OS 2.x Upgrade from 2.2.1 to 3.0 -
An i tunes update failed , and now i tunes will not open
I deleated I tunes and attempted to re insrall, with neg results . says restricted or have no privlidges.
also attempted to restore I tunes from hard drive back up, I tunes is also restricted from there also ?
I could use some help please
MartinJGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
System was running fine until the update
Hello jackhennessy,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below as an administrator:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step. You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I recommend the following article if you continue to receive an error:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M. -
OS X update failed and now i can't launch App Store and Mail.app
Today my Mac offered me to update OS X.
During update there was unknown error and known I can't launch App Store to finish update. Mail.app also doesn't work.I've just download http://support.apple.com/kb/DL1641 and installed it. This helped me.
Thank ypu for advice.
Maybe you are looking for
-
I'm having this error on my Manage your team page. I've updated the credit card information. the credit card has enough balance for the payment and still I get this error. Also I have a warning on every PC using the Adobe Cloud products stating that
-
Well, there's not much more to say really. The main reason I use Firefox is so that I can leave all my tabs open and come back to them next time I log onto the internet and since I upgraded to Firefox 4 I have not been able to do this. When I close d
-
Hello I am using Spry.Widget.AutoSuggest to sort the data from an external XML file In the XML there are some url-s pointing to pictures to be loaded but the problem is that they all loads in the cache as the page initializes. Although they are not s
-
How-to flash with external static page? Help!
Hello all. I am new to posting so please be nice. I am building a flash site and would like a page or something on how-to link my flash.swf file to a page outside of the flash file (.fla) . Let me explain a bit more... I would like a way for my wife
-
Pro-100 Custom Printer Profiles
Has anyone had success in using a custom printer profile with this printer. Glossy generic Canon paper profiles work ok but are not completely on the money. I get a little too much red. I had a custom profiles created by reputable 3rd party provider