3502i image extraction failure from WLC

This is a basic CAPWAP connection with static address on AP to WLC.  Fails on extraction of image.   Here is the console output from the AP:
examining image...!
extracting info (292 bytes)
Image info:
    Version Suffix: k9w8-.124-23c.JA2
    Image Name: ap3g1-k9w8-mx.124-23c.JA2
    Version Directory: ap3g1-k9w8-mx.124-23c.JA2
    Ios Image Size: 5612032
    Total Image Size: 5919232
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: AP3G1
    Wireless Switch Management Version: 7.0.116.0
Extracting files...
ap3g1-k9w8-mx.124-23c.JA2/ (directory) 0 (bytes)
extracting ap3g1-k9w8-mx.124-23c.JA2/Z5.bin (29492 bytes)!!
extracting ap3g1-k9w8-mx.124-23c.JA2/ap3g1-k9w8-mx.124-23c.JA2 (4721941 bytes)!!!!!
*Jun 21 18:29:31.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: x.x.31.61 peer_port: 5246
*Jun 21 18:29:31.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Jun 21 18:29:31.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: x.x.31.61 peer_port: 5246
*Jun 21 18:29:31.572: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.31.61
*Jun 21 18:29:31.572: %CAPWAP-5-CHANGED: CAPWAP changed state to JOINperform archive download capwap:/ap3g1 tar file
*Jun 21 18:29:31.578: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Jun 21 18:29:31.581: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Jun 21 18:29:31.581: Loading file /ap3g1...
Premature end of tar file
ERROR: Problem extracting files from archive.
archive download: takes 80 seconds
*Jun 21 18:30:49.633: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to x.x.31.61:5246
*Jun 21 18:30:49.636: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 21 18:30:49.636: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 21 18:30:49.690: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
*Jun 21 18:30:51.521: capwap_image_proc: problem extracting tar file
It looks to me like the image might be corrupt on the WLC, but I can't figure out how to update it on the WLC.   I have had this equipment for two weeks, so I am still figuring it out.   
Any suggestions or guidance would be appreciated.
Thanks,
Noah

Thank you this helped me solved an issue I had with a 1042. Rebooting the WLC solved the issue following the upgrade of our WISMs from version 7.0.116.0 to version 7.0.220.0

Similar Messages

  • Data Extraction failure from DSO to Cube

    Hello Experts,
    The Data load to Cube( zfiar_c03) from DSO (zfiar_03) using a full
    update is failing throwing the error message"Incomplete update due to
    errors in single records ".We had deleted the failed request from
    infocube and loaded the the same req from psa by correcting or removing
    the # values but it failed again resulting in the same error.
    When we checked the previous successful requests which got loaded to
    cube from dso it also contains the # values , but the loading was
    successful.
    our BW reporting is seriously impacted due to the failure coz our
    collection,recievables..etc all business critical report is based on
    this cube.
    Request you all to help..
    thanks,
    Sapta

    Hi Sapta Jyothi,
                     I am not sure what the actual problem is. But, from my prior experience, I fell this is related to the Process chain configuration provided you are using process chains.
                     If  you are using a process chain , please check if there is any other failed step in the Process chain. If that is the case, even if the failure due to invalid entries is fixed the QM status of the load to the cube will not turn Green till the process chain status turns green or yellow. You can check from the details tab of the info-package load run and see if the process chain log step is red. If this is the case, then you will have to take action to see that other steps are completed succesfully. And also the Process chain in this case needs to be modelled in a way, such that, when a load to a cube fails the successive steps like creation of cube indeces should not be triggered.
    Thanks ,
    Nithin.

  • 1142 Kept on Downloading Image from WLC CT2504

    Dear All,
    i'm a newbie of cisco wireless product, this my first time use.
    on the WLC i've set DHCP address pool, everything seems fine after ap download image -> reboot -> hit "Enter" to start blar blar blar... however, after a few second the WLC will initial upgrade image again and again. it's like a non-stop process.
    can anyone advise me where to start?  attached is the start up message, as you can see, i captured it after the ap successfully boot up, and WLC initial another cycle of image upgrade.
    btw, my network is flat, WLC & AP all in the same network.
    Thanks & Regards
    Eric
    *Nov  3 06:28:30.788: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...!
    extracting info (292 bytes)
    Image info:
        Version Suffix: k9w8-.124-23c.JA3
        Image Name: c1140-k9w8-mx.124-23c.JA3
        Version Directory: c1140-k9w8-mx.124-23c.JA3
        Ios Image Size: 4905472
        Total Image Size: 5100032
        Image Feature: WIRELESS LAN|LWAPP
        Image Family: C1140
        Wireless Switch Management Version: 7.0.220.0
    Extracting files...
    c1140-k9w8-mx.124-23c.JA3/ (directory) 0 (bytes)
    c1140-k9w8-mx.124-23c.JA3/html/ (directory) 0 (bytes)
    c1140-k9w8-mx.124-23c.JA3/html/level/ (directory) 0 (bytes)
    c1140-k9w8-mx.124-23
    *Nov  3 06:28:35.788: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.88perform archive download capwap:/c1140 tar file
    *Nov  3 06:28:35.803: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Nov  3 06:28:35.809: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGEc.JA3/html/level/1/ (directory) 0 (bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/forms.js (17486 bytes)!
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/sitewide.js (16548 bytes)!
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/officeExtendap.css (41795 bytes)!!!
    *Nov  3 06:28:35.809: Loading file /c1140...
    extracting c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3 (4721403 bytes)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                              !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    extracting c1140-k9w8-mx.124-23c.JA3/info (292 bytes)
    extracting info.ver (292 bytes)!
    Deleting target version: flash:/c1140-k9w8-mx.124-23c.JA3...done.
    New software image installed in flash:/c1140-k9w8-mx.124-23c.JA3
    Configuring system to use new image...done.
    archive download: takes 107 seconds
    Writing out the event log to nvram...
    *Nov  3 06:30:22.083: %DTLS-3-BAD_RECORD: Erroneous record received from 192.168.1.88: Duplicate (replayed) record
    *Nov  3 06:30:22.987: image upgrade successfully, system is now reloading
    *Nov  3 06:30:23.043: %SYS-5-RELOAD: Reload requested by capwap image download proc. Reload Reason: NEW IMAGE DOWNLOAD.
    *Nov  3 06:30:23.046: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
    using  eeprom values
    WRDTR,CLKTR: 0x83000800 0x40000000
    RQDC ,RFDC : 0x80000034 0x00000207
    using ÿÿÿÿ ddr static values from serial eeprom
    ddr init done
    Running Normal Memtest...
    Passed.
    IOS Bootloader - Starting system.
    FLASH CHIP:  Numonyx P33
    Checking for Over Erased blocks
    Xmodem file system is available.
    DDR values used from system serial eeprom.
    WRDTR,CLKTR: 0x83000800, 0x40000000
    RQDC, RFDC : 0x80000034, 0x00000207
    PCIE0: link is up.
    PCIE0: VC0 is active
    PCIE1: link is up.
    PCIE1: VC0 is active
    PCIEx: initialization done
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/appsui.js (557 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/config.js (24633 bytes)!!
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/ap_home.shtml.gz (1300 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/back.shtml (506 bytes)
    c1140-k9w8-mx.124-23c.JA3/html/level/1/images/ (directory) 0 (bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/images/cisco-logo-2007.gif (1648 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/images/background_web41.jpg (732 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/images/login_homeap.gif (19671 bytes)!!
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/1/images/info.gif (399 bytes)
    c1140-k9w8-mx.124-23c.JA3/html/level/15/ (directory) 0 (bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/15/officeExtendapBanner.htm (7108 bytes)!
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/15/officeExtendapHelp.htm (5007 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/15/officeExtendapEvent.shtml.gz (983 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/15/officeExtendapConfig.shtml.gz (2861 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/15/officeExtendapMain.shtml.gz (3361 bytes)!
    extracting c1140-k9w8-mx.124-23c.JA3/html/level/15/officeExtendapSummary.htm (712 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/T2.bin (8080 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/8001.img (174880 bytes)!!!!!!!!!!!!!!
    extracting c1140-k9w8-mx.124-23c.JA3/T5.bin (23836 bytes)
    extracting c1140-k9w8-mx.124-23c.JA3/info (292 bytes)
    extracting info.ver (292 bytes)!
    Deleting target version: flash:/c1140-k9w8-mx.124-23c.JA3...done.
    New software image installed in flash:/c1140-k9w8-mx.124-23c.JA3
    Configuring system to use new image...done.
    archive download: takes 107 seconds
    PCIE0: link is up.
    PCIE0: VC0 is active
    PCIE1: link is up.
    PCIE1: VC0 is active
    PCIEx: initialization done
    flashfs[0]: 28 files, 8 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32385024
    flashfs[0]: Bytes used: 7451136
    flashfs[0]: Bytes available: 24933888
    flashfs[0]: flashfs fsck took 21 seconds.
    Reading cookie from system serial eeprom...Done
    Base Ethernet MAC address: 60:73:5c:31:b0:dc
    Ethernet speed is 100 Mb - FULL duplex
    Loading "flash:/c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3"...############################################################################################################################################################################################################################################################################################################################################################################################################################################################
    File "flash:/c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3" uncompressed and installed, entry point: 0x4000
    executing...
    enet halted
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Tue 18-Oct-11 14:52 by prod_rel_team
    Proceeding with system init
    Proceeding to unmask interrupts
    Initializing flashfs...
    FLASH CHIP:  Numonyx P33
    Checking for Over Erased blocks
    flashfs[1]: 28 files, 8 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 32126976
    flashfs[1]: Bytes used: 7451136
    flashfs[1]: Bytes available: 24675840
    flashfs[1]: flashfs fsck took 5 seconds.
    flashfs[1]: Initialization complete.
    flashfs[2]: 0 files, 1 directories
    flashfs[2]: 0 orphaned files, 0 orphaned directories
    flashfs[2]: Total bytes: 11999232
    flashfs[2]: Bytes used: 1024
    flashfs[2]: Bytes available: 11998208
    flashfs[2]: flashfs fsck took 1 seconds.
    flashfs[2]: Initialization complete....done Initializing flashfs.
    Ethernet speed is 100 Mb - FULL duplex
    Radio0  present 8363 8000 90020000 0 90030000 B
    Radio1  present 8363 8000 98020000 0 98030000 0
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-LAP1142N-C-K9    (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
    Processor board ID FGL1632S622
    PowerPC405ex CPU at 586Mhz, revision number 0x147E
    Last reset from reload
    LWAPP image version 7.0.220.0
    1 Gigabit Ethernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 60:73:5C:31:B0:DC
    Part Number                          : 73-12836-05
    PCA Assembly Number                  : 800-33767-05
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC16301SFC
    Top Assembly Part Number             : 800-33775-04
    Top Assembly Serial Number           : FGL1632S622
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1142N-C-K9
    % Please define a domain-name first.
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    Press RETURN to get started!
    *Mar  1 00:00:07.703: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:07.714: *** CRASH_LOG = YES
    Security Core found.
    Base Ethernet MAC address: 60:73:5C:31:B0:DC
    *Mar  1 00:00:09.283: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:09.855: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
    *Mar  1 00:00:09.903: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)
    *Mar  1 00:00:09.926:  status of voice_diag_test from WLC is false
    *Mar  1 00:00:10.970: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:12.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:12.084: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Tue 18-Oct-11 14:52 by prod_rel_team
    *Mar  1 00:00:12.085: %SNMP-5-COLDSTART: SNMP agent on host AP6073.5c31.b0dc is undergoing a cold start
    *Mar  1 00:10:23.055: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:10:23.055: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:10:24.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:10:24.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:10:32.053: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Mar  1 00:10:33.293: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:10:41.916:  status of voice_diag_test from WLC is false
    *Mar  1 00:10:41.973: Logging LWAPP message to 255.255.255.255.

    Dear Leolaohoo, i've performed the command, after reboot it'll join the controller and then the downloading process keep on repeating again. here's the output after i perform the command.
    AP6073.5c31.b0dc#de
    AP6073.5c31.b0dc#del
    AP6073.5c31.b0dc#delete /f /r fl
    AP6073.5c31.b0dc#delete /f /r flash:/c1
    AP6073.5c31.b0dc#delete /f /r flash:/c1140-k
    AP6073.5c31.b0dc#delete /f /r flash:/c1140-k9w8-mx.124-23c.JA3
    AP6073.5c31.b0dc#clear capwap pri
    AP6073.5c31.b0dc#clear capwap private?
    private-config
    AP6073.5c31.b0dc#clear capwap private
    AP6073.5c31.b0dc#clear capwap private-config
    AP6073.5c31.b0dc#reload
    Proceed with reload? [confirm]
    Writing out the event log to nvram...
    *Mar  1 00:12:29.460: %SYS-5-RELOAD: Reload requested by Cisco on console. Reload Reason: Reload Command.
    *Mar  1 00:12:29.463: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
    using  eeprom values
    WRDTR,CLKTR: 0x83000800 0x40000000
    RQDC ,RFDC : 0x80000034 0x00000207
    using ÿÿÿÿ ddr static values from serial eeprom
    ddr init done
    Running Normal Memtest...
    Passed.
    IOS Bootloader - Starting system.
    FLASH CHIP:  Numonyx P33
    Checking for Over Erased blocks
    Xmodem file system is available.
    DDR values used from system serial eeprom.
    WRDTR,CLKTR: 0x83000800, 0x40000000
    RQDC, RFDC : 0x80000034, 0x00000207
    PCIE0: link is up.
    PCIE0: VC0 is active
    PCIE1: link is up.
    PCIE1: VC0 is active
    PCIEx: initialization done
    flashfs[0]: 6 files, 2 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32385024
    flashfs[0]: Bytes used: 2365440
    flashfs[0]: Bytes available: 30019584
    flashfs[0]: flashfs fsck took 19 seconds.
    Reading cookie from system serial eeprom...Done
    Base Ethernet MAC address: 60:73:5c:31:b0:dc
    Ethernet speed is 100 Mb - FULL duplex
    Loading "flash:/c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3"...flash:/c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3: no such file or directory
    Error loading "flash:/c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3"
    Interrupt within 5 seconds to abort boot process.
    Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#######################################################################################################################################################################################################################
    File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entry point: 0x4000
    executing...
    enet halted
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1140 Software (C1140-RCVK9W8-M), Version 12.4(21a)JA, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Mon 08-Jun-09 16:28 by prod_rel_team
    Proceeding with system init
    Proceeding to unmask interrupts
    Initializing flashfs...
    flashfs[1]: 6 files, 2 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 32385024
    flashfs[1]: Bytes used: 2365440
    flashfs[1]: Bytes available: 30019584
    flashfs[1]: flashfs fsck took 4 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    Ethernet speed is 100 Mb - FULL duplex
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-LAP1142N-C-K9    (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
    Processor board ID FGL1632S622
    PowerPC405ex CPU at 586Mhz, revision number 0x147E
    Last reset from reload
    LWAPP image version 3.0.51.0
    1 Gigabit Ethernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 60:73:5C:31:B0:DC
    Part Number                          : 73-12836-05
    PCA Assembly Number                  : 800-33767-05
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC16301SFC
    Top Assembly Part Number             : 800-33775-04
    Top Assembly Serial Number           : FGL1632S622
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1142N-C-K9
    % Please define a domain-name first.
    Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
    Press RETURN to get started!
    *Mar  1 00:00:05.915: *** CRASH_LOG = YES
    Base Ethernet MAC address: 60:73:5C:31:B0:DC
    *Mar  1 00:00:06.121: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)
    *Mar  1 00:00:08.167: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
    *Mar  1 00:00:08.184: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1140 Software (C1140-RCVK9W8-M), Version 12.4(21a)JA, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Mon 08-Jun-09 16:28 by prod_rel_team
    *Mar  1 00:10:23.981: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:10:32.016: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER
    Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:10:41.016: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    *Mar  1 00:10:41.017: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:10:50.964: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER
    *Mar  1 00:10:54.600: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C2960-24PC-L (34bd.c8f6.5681)
    *Mar  1 00:10:59.964: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
    Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
    *Mar  1 00:11:18.965: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER

  • Looking for best apple software for image extraction i.e. select an image from one photo and place it on another photo

    looking for best apple software for image extraction i.e. select an image from one photo and place it on another phot

    Cannot guarantee it's the best, but it certainly is the least expensive:
    http://www.gimp.org/downloads/

  • To run setup from extracted folder(from before installation/failure) should be OK

    I went install dw cs6 win but failed... I upgrded my vista to sp2 (from sp0) seems now must succeed, well is needed re-extract exe file (downloaded) or to run setup from extracted folder(from before installation/failure) should be OK?

    I went install dw cs6 win but failed... I upgrded my vista to sp2 (from sp0) seems now must succeed, well is needed re-extract exe file (downloaded) or to run setup from extracted folder(from before installation/failure) should be OK?

  • IMAQ image to array vi not working with images extracted from avi file

    Hi,
      I downloaded some avi's and uncompressed them so that I can analyze them within labview. I am trying to convert images I am reading from the avi file to an array. When I use "IMAQ image to array" I get the following error " IMAQ Image To Array  Invalid image type" -1074396080.
       I am able to display each read image and save them to the hard drive, but I am unable to convert the vision image to array. I verified that the image extracted from avi is the same as the image type I created in memory to hold the image.
      Please see the attached vi I created.
    thank you
    Ruz
    Attachments:
    example2.vi ‏62 KB

    Hi all, this thread was useful for me...but i have another doubt... when I try to extract a single plane (Luminance, Saturation, R,G,B...anyone) and try to save it in jpg as gray image, it saves an image with blue tones. I have examinated it using Matlab and checked that Red plane has low values (but not zero), the same for G plane and high values for B plane. An image of the VI is attached.
    Thanks in advance
    Attachments:
    planes.png ‏28 KB

  • Extract drivers from boot image

    I have a boot image and my team members added lot of drivers on top of boot images.... Now I want to get a report to get the list of drivers that are integrated
    and their source path as I must  have to keep them in a separate folder so that in my up coming migration project I can use them again to integrate in new boot images when migrated from sccm 2012 RTM to SP1 and R2
    Kindly through some light on this
    HunBoy Started learning from this page

    You should not use the drivers from your old boot images in your new boot images.
    Windows PE drivers are not the same for every verison of ConfigMgr.
    Win PE 5.0 = SCCM 2012 R2
    Win PE 4.0 = SCCM 2012 SP1
    Win PE 3.0 = SCCM 2012 RTM
    And the drivers you need are:
    Win PE 5.0 = Windows 8.1
    Win PE 4.0 = Windows 8
    Win PE 3.0 = Windows 7
    Windows PE 5.0 also includes many new drivers so drivers that you needed in older versions of PE might not be required any more...
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • "An error occurred while extracting files from the package "BaseSystem.pkg".

    Hello!
    I have a
    MacBookPro5,5
    Prozessortyp:Intel Core 2 Duo
    Prozessorgeschwindigkeit:2.26 GHz
    Anzahl der Prozessoren:1
    Gesamtzahl der Kerne:2
    L2-Cache:3 MB
    Speicher:2 GB
    Busgeschwindigkeit:1.07 GHz
    Boot-ROM-Version:MBP55.00AC.B03
    SMC-Version (System):1.47f2
    Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
    Problem:
    I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
    Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
    Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
    Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n    NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
    Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
    Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
    Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation:   139 MB wired,   259 MB trapped,   397 MB active,     7 MB inactive,  1246 MB free,  1650 MB usable,  2048 MB total

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • Error While Extract results from OBIEE 11g Prest. Service to External apps.

    Need a urgent help
    I am using java to connect to OBIEE's  11g SOAP-API and trying to pull Graph’s in External Application.
    I have successfully been able to connect to the API, create an HtmlViewServiceSoap object, and use a combination of the following methods to pull HTML & Javascript Content and write to a file through this all methods: addReportToPage, getHeadersHTML, and getHTMLForReport.
    But while executing the respective URL got from getHeadersHTML ,getHTMLForReport function it gives ‘EmptyResponse’ alert message. Actually, The URL got from getHTMLForReport i.e. reportObject.setAjaxGoUrl does not Hit to Bridge Servlet, So in the application only the Searching image appears with ‘EmptyResponse’ alert message .
    We are Successfully able to render graphs using OBIEE's  10g SOAP-API HtmlViewServiceSoap service and getHeadersHTML ,getHTMLForReport function in External Application.
    Please let me Know the solution ASAP for extracting Graph from OBIEE's 11g SOAP-API
    Edited by: user13351567 on Jul 1, 2011 12:49 AM

    Hi all
    João, could you please explain how did you solved that network problem? I'm having a similar error establishing a Site Studio connection: 'Design time connection error: java.net.SocketTimeoutException: Read timed out'
    If I create this connection from a JDeveloper installed in the machine where UCM, WebCenter and SSXA are installed there's no connection problem. The problem only occurs in others pcs in the same network.
    Thank you in advance

  • Error while extracting data from a remote system

    Hi,
    I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
    ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
    ORA-00604: error occurred at recursive SQL level 1
    ORA-28000: the account is locked
    ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
    here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
    Thanks

    Hi,
    IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
    we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
    Goto St22 see the short dump error msg..
    post if there any inf..
    Thanks,
    Shreya

  • Satellite Pro A10: Extraction failure error occurs while recovering procedure

    Im trying to run the recovery discs on my Satellite Pro A10 but after 20 second of trying to install recovery disc 1 screen gose black and message in corner says extraction failure.
    Can you help me please?

    Did you try to format and to delete whole partitions on the HDD before performing the installation from the recovery CD???
    Something similar happened to me. I was not able to install the OS from the Recovery CD.
    I have simply used the original Windows CD and have formatted the whole HDD.
    After this procedure the Recovery CD installation has worked.

  • Is there a way to extract iMessages from Mac to PDF or .txt format?

    I've been searching the net but to no avail. All results point to backing up/extracting iMessages from iDevices other than a Mac. I'm going to change my Apple ID and I want to at least have a copy of the previous convos I had if PDF or .txt format. Thanks in advance! 

    HI,
    If you have the Save on Close  option enabled in Messages > Preferences > Messages then all Chats and conversations are saved.
    They can be recalled any time.
    1) In the Messages app the File Menu > Recent Items will list the last X number of chats.
    X is the number set in System Preferences > General pane about the number of Documents, Applications and Servers shown in such lists.
    2) old migrated iChat Saved chats are in Your Home Folder/Documents/iChats
    3) New Saves are in your Home Folder/Library/Messages/Archive although this Library is Hidden.
    In th Finder > Go Menu > Go to Folder and type ~/Library/Messages into the dialogue box that appears.
    I have 10 non iMessages accounts as well as  my iMessages account logged in when I am on line.
    I can call up any of the last Chats shown in Recent Items no matter which account they came from  (different Screen Name or Jabber IDs or even Bonjour chats)
    I have not actually changed my iMessages ID to check but the app will continue to save to the same Folder and it should be able to retrieve recent ones.
    Visiting the folder and double clicking an older chat tends to launch it in a new window separate from the Messages Window itself (no Side bar no, Text field at the bottom, no "To" spot).
    8:31 PM      Friday; March 29, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How extract properties from document saved in blob.

    I need extract all document properties from document (any file type) saved in blob.
    I've tried three ways...
    - I've tried using relational ORDDoc.getProperties() by example. But this method returned exception ORDSYS.ORDDOCEXCEPTIONS.DOC_PLUGIN_EXCEPTION for every blob.
    - I can extract some properties with ctxhx.exe and key Meta. But this method is very expensive: I have to 1)save blob to file, 2)convert binary file to html-file, and 3)extract properties from html <meta> and <title> tags.
    - I can extract all properties with COM Automation. But this way need to install a lot of applications for every document type. It's impossible.
    Has anybody did same task yearly? Help me oracle guru!

    ORDDOc getproperties will attempt to see if the media is a video, audio or image and set the appropriate properties.
    I am gussing you have a word style document or something like that?
    Can you tell me about your application adn what you are trying to do?
    Larry

  • Auto image load failure, ssl failure, secure connection failure

    First their is a problem with some ssl web sites, now I have read the article and if it had worked I would not be posting this here. so for the last time, I go to a bank web site it has the page that tells me to add a exception. then when i get to the page for the exception it says their is no problem and no exception will be added. period. it is a loop, it will not not not let me add the web site to the exception list and sits their and fights with me. when i go to add it to the list it says no their is no problem with the cert so it will NOT be added, but when i try to go their it pops up the page again saying i cant go their because their is a problem. so this is a loop which means it does the same thing over and over and over again. so trying to add it to the exception list can not happen because firefox will NOT let me add it and will NOT let me go their any longer.
    Problem 2. I was not able to post a question in this forum until i told it to search for bearded dragon as the problem with firefox THEN and ONLY THEN would it let me open this question.
    problem 3 : in ebay in my own listings i am having a auto load image failure, yes yes yes I did add the web addresses under auto load images , exceptions and allow for both hosting web sites and even though they are in their it will still NOT NOT NOT load the images. it will make me, by forcing me, to go to view 1 image on the page then it says WARNING YOUR ABOUT TO GO FROM A SECURE CONNECTION TO A UN SECURE CONNECTION. then AFTER I say yes and go to view that 1 image it unlocks all of the other images on the web page.
    and why is that happening because the firefox is not programmed correctly as in the base coding i can not change, I would need to tell it to STOP STOP STOP blocking the images and stop warning me when i am going from a secure connection to a unsecure connection.
    and it will not not not for the love of god not load images on ebay in secure when the images are hosted from a unsecure web site.
    their is really no discussion, I am simply telling you all what it is doing, period.
    I have a iq of 165 and I am not stupid so what I am saying it is doing is what it is doing.
    so telling me to read crusty old articles will just make me madder as I have all ready read them front, back, up side down and sideways and if they really worked like it says they do you would not be reading this.

    so far under 9.0it is accepting the security certs, so I do not know if that happened again if it would have the same error or not.
    but ty 4 trying to help.

  • Extracting data From PDF to Excel

    I have inherited a large library of PDF invoices which I need to extract data from into excell - or some other spreadsheet. The other option is to open up thousands of pdf documents and run the numbers by hand which is just dumb. I am new to acrobat and an entire afternoon of trial by fire / google hasn't gotten me very far - so even pointers in the right direction are appriciated.
    Ideally I would like to tell Acrobat what data is important on each document (can I use the form tool to do this?), extract the data from the relevant files (batch processing tool I presume?), compile the data and extract it to a CSV.
    It looks like the functionality is here I am just unsure how it all needs to fit together. Any Suggestions?

    Hi,
    There is software out there that will convert PDFs to excel... look for ABBYY or Able to extract... If you have a lot of files that are the same merge them together before using the software. Remember that if the data is created from a scanned image then the results will only be as good as the ability of the OCR engine contained in the software. You can play with the software to create tables, etc...

Maybe you are looking for

  • Radeon HD 7800 (catalyst) + Intel HD graphics (intel-dri) seg fault

    Hello, Arch community! I'm using two monitors setup: one is connected to the Radeon HD 7800 other is connected to the motherboard D-SUB socket. Symptoms: - X starts if to use opensource radeon driver. - X starts if to use only one screen inside Serve

  • Why can't I upload my personal pictures from my photo galary to Photo Shop Touch?

      So I go to upload a photo of mine to edit it and I realize I could images from everywhere except for my own gallery. Am I doing something wrong?...

  • Csv in numbers

    How do you save a numbers or xls file to a csv in numbers?

  • Muse Contact Forms within DPS

    Hi, I would like to test a contact form I created in Adobe Muse for use in a DPS Folio. Is there a way for me to test a form once I update to the Cloud? Thank you, Lain Kennedy    

  • Urgent: graphic filter error

    One of our FM installs suddenly, out-of-the-blue can't display referenced or imported graphics. The graphics displayed correctly until a few days ago. We have not changed anything on the machine or in the FM files. The graphics display correctly on o