351 Issue only with delivery schedule wise

Hi,
Is it possible to issue (351) materials based on delivery schedule wise. Like in GR we get the receipts by del schedule wise.
Like i have SA 111111 for qty 999 and del sch is as below,
SA             target qty
111111        999
Del schedule for the above is :
01/01/2009      100
01/10/2009      200
01/20/2009      400
01/30/2009      299
Say when I issue using MIGO or MB1B for 351 Mvt type we get all the 999 quantities. What my requirement is i shld be able to get as per the del schedule lik four line items for this SA as in GR. If we do the GR for the above SA then it will show four line items. So we need as per GR only.
Is this possible or is there any changes we need to do or is there any userexit we can use to achive this.?
I appreciate your quick response.
Thanks,
Suresh

why do you issue with MIGO when you use SD delvieries?
You can issue from within the delviery by clicking the goods issue button, or with VL06G

Similar Messages

Procurement scenario with delivery Schedule

Hello experts,
In this case we have a purchase order that count with Delivery Schedule, in this case 4 planned deliveries, every one with this specific delivery date and Quantity.
Now we going to create an Inbound delivery and the goods receipt, only for the first Delivery Schedule (it means 3 delivery schedules are pending to happen). When we verify in the Purchase order history, only show a partial Goods receipt (in this case corresponding with the first delivery schedule).
Now we are going to verify in EM (/SAPTRX/EH_LIST) and the event handler show the events as executed complete, but in the reality, we have still pending 3 Delivery schedule to make.
In this case we have a difference between SAP ECC and SAP EM, because in SAP ECC the system show the event in u201Cpartially executedu201D, and in EM the event itu2019s in status of Closed.
It represent a problem of visibility cause I can´t see complete, an event that is still in progress.
An additional question it´s about the visualization in /SAPTRX/EH_LIST transaction, in this case we have the detail at -> Purchase order / position.
It´s posible to see -> Purchase order / position / delivery schedule. I mean at delivery schedule level?
In the following link you can see the description made with images for more clarity:
http://www.sendspace.com/file/zx3w6o
I appreciate a lot your help with this issue.
Best regards,
Julián.

Hello Julian,
if you want to track on schedule line level an option would be create EH also on schedule line level.
This would be a complete new visibility process.
Another option is to create an own rule activity fo the status handling. There you could check if all events for the inbound deliveries for the assigned schedules are already received. If not you could create a new status like partially delivered.
This would need only some enhancements in the rule set.
Best regards,
Steffen

Scheduling agreements with delivery schedule - Copy control

Hi,
I wonder, if it would be possible / would make sense to specify for sales document type "LZ - Scheduling agreements with delivery schedule" a copy control for referenced documents like quotations.
Is there anybody who already has experience in that field?
Thank you in advance for your answers.
Best Regards,
Melanie

Hi,
It is obvious that, a schedule agreement needs to come with the fixed delivery qty and dates.
Pls explain your requirement in detail so that you will get a clear solution.
Rgds,
Sivarajesh. j

Scheduling agreements with delivery schedule - Deviation tolerance

Hi,
Within sales order document "Scheduling agreements with delivery schedule" (LZ) it is possible to enter deviation tolerances (e.g. deviation in quantity) manually for each single item line.
Does anybody know, if it is also possible to set up firm tolerance groups with assignment to customer / material, which are copied automatically into item lines of scheduling agreements?
Thank you for your assistance.
Best Regards,
Melanie

Hi,
It is obvious that, a schedule agreement needs to come with the fixed delivery qty and dates.
Pls explain your requirement in detail so that you will get a clear solution.
Rgds,
Sivarajesh. j

Issue on Purchase order creation with Delivery schedule line items per PR

Hi
Note->Developed inbound FM to create PO's in SAP through IDOC.
We are creating purchase orders from vendor which is coming from Inbound IDOC. Here we are using as BAPI_PO_CREATE1
to create PO's. before that i am passing all the inbound data of the IDOC and getting some Purchase requisions for plant and material wise from EBAN table where we have open PR's and split the inbound line item qauntity as per Open quantity in Purchase requisions. Problem here we are modifing schdule line data as per purcahse requisitions and post the all the shehduline data into above functional module, we are using creation date as delivery date in the scheduling line for each line.
Set1- If we have multiple requisions for each material and plant in the inbound IDOC item , while creating PO using above BAPI
creating PO with delivery date is taken from Purchase requesion date, this only will happend in the first schudle line item always, second line scheulde has taken correctly from creation data as delivery date.
Set2-If we have one requisition for each line item, it will creating correctly for schulding line item as with correct delivery , whcih is not taken from requstion delivery date.
Set 2 is working correctly, but Set1 has problem with delivery date in the scheduling lines particulary for first schduling line item.
Please help me on this issue.
Advance wishes

Hi Satish
Thanks for the reply.
I checked the parameters and it is creating 2 PO when the Indicator Ordering address is set.If I uncheck this Indicator then only one PO is created.
But now my question is from where is the Ordering address taken because for both line items Vendor is same and ordering address is also same.
Then why the system is creating new PO?
Regards
Vaibhav Mahajan

Converting Multipule Reqs to a Purchase Order with Delivery Schedule Lines

Is it possible to convert a multiple Purchase Reqs for the same items to a PO that has one line but multipule deliver dates in the Schedule lines - Where the Purchase Reqs have been generated by MRP
Example
I have an SAP Contract 46***** that runs via MRP and creates 3 Reqs for item number 12345. All from the same vendor
             Req 1 delivery date 2/4/10 QTY 50
             Req 2 delivery date 6/4/10 QTY 20
             Req 3 delivery date 10/4/10 QTY 30
Aim is to have 1 PO with line 1 having a QTY 100 but the Delivery Schedule Tab to show the three seperate delivery needs
            date 2/4/10 QTY 50
            date 6/4/10 QTY 20
            date 10/4/10 QTY 30
Any Help?

When i try that the QTY in line one does not alwasy update to the total qty of the reqs and infact the qty on the req doesnt always appear in the schedule line....
This works for me perfect, I never encountred that the item quantity was not updated if I added a new requisition to the schedule.
ME59N should work, do not select per requistion and per delviery date in the New PO section in the selection screen. But set a flag into box create schedules.

Help with Delivery Schedules In PR

Is it possible to enter a delivery schedule in a purchase requisition (like it is in a Purchase Order)?
The desired output is multiple delivery schedules in one PO line item, but it doesn't seem to be possible to enter this information in the purchase requisition.

Hi DG,
I am sorry to say that there is no possiblility of Delivery schedules in Purchase Requisition like Purchase order.
Reg,
Ashok
Please close this issue, if answered.

Scheduling Agreement with Delivery Schedule using Idoc messages

Hi all,
Can anybody please explain the importance of the field name "LABKY" in Idoc execution for Forecaste/JIT Delivery Schedule.
My requirement is that when i send a new Idoc i do not want the old schedule line which are not yet released , to be deleted .
As per the SAP help the use of the field LABKY is related to this , but when i tried its value as "1" , the previous schedule lines are still getting deleted.
Can you pls explain how to go about it . ( DELFOR/DELJIT Idocs)
Thank you
Regards
Subha

Hi ,
The Field
LABKY : Delivery schedule key
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 026, Offset : 0393. external length : 000001
Regards
Seegal

Idoc execution in Scheduling Agreement with Delivery Schedule

Hi all,
Can anybody please explain the importance of the field name "LABKY" in Idoc execution for Forecaste/JIT Delivery Schedule.
My requirement is that when i send a new Idoc i do not want the old schedule line which are not yet released , to be deleted .
As per the SAP help the use of the field LABKY is related to this , but when i tried its value as "1" , the previous schedule lines are still getting deleted.
Can you pls explain how to go about it . ( DELFOR/DELJIT Idocs)
Thank you
Regards
Subha

Hi ,
The Field
LABKY : Delivery schedule key
internal data type : CHAR
Internal length : 000001 characters
Position in segment : 026, Offset : 0393. external length : 000001
Regards
Seegal

Keyboard layout issue only with Windows 7, not Windows 8

Hello,
I have a strange behaviour with Remote Desktop on Windows 7. I have a RDS 2012R2 deployment, with TS Gateways, broker and remote desktop collection. I have published a RemoteApp.
My issue is with the keyboard layout send by the client. My server is in English - Swiss French keyboard.
With my Windows 8 client, keyboard in "French", the keyboard used in my RemoteApp is correctly set to "French"
With my Windows 7 client, keyboard in "French", the keyboard used in my RemoteApp is set to "Swiss - French". This is not the correct layout.
Why under Windows 7 the keyboard layout is not send correctly ?

Hi Sebastien,
Initially please use latest RDP version 8.1 for windows 7 and check the result.
If you want the session to use the default keyboard layout stored in the user profile instead of the layout provided by the Remote desktop Server client after the user logs on to the Remote desktop Server computer, you can set the IgnoreRemoteKeyboardLayout
registry value to 1. After users first connect to the Remote desktop Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from
the profile.
To do so, please perform the following steps:
1. On the remote desktop server, click Start, click Run, type regedit, and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
3. On the Edit menu, click Add Value, and then add the following registry information:
Value name: IgnoreRemoteKeyboardLayout
Data type: REG_DWORD
Value data: 1
4. Quit Registry Editor.
After you first connect to the Remote desktop Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from the profile.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

EeePC- SDHC Issues only with Arch

To begin with I have a Eeepc 701 4G and a A-DATA 16GB SDHC Turbo Eee PC Edition card. Whenever I try to install Arch via a usb drive, I get a error on boot that says something along the lines of I/O error with my SDHC card which is listed as /dev/sdc1. Normally I would think this is a defective card or its going bad but Arch is the only distro that gives me this error. The error is just in the text that scrolls by but it also hangs when trying to partition the SDHC drive To test it out I have installed Mandriva 2008.1 Spring, Ubuntu 7.10/8.04/8.10, Ubuntu-eee, fluxflux-eee, and Forsight Mobile (I have been going crazy trying to find a distro I can live with/ even close to what Arch provides). Each one of them I set the / partition on the internal SSD and the /home partition on the SDHC card. Arch is the only one that gives a error with the SDHC card. I have ran extensive tests in Linux and also windows(sisoft sandra) but everything is fine with the card. The card is supported as it is a "Eee PC Edition Model" http://www.newegg.com/Product/Product.a … 6820211300 I have noticed tha some distros have problem with installing via a usb drive and using /home on a SDHC drive(only Fluxflux-eee) but it is normally a /etc/fstab issue not the I/0.
Any ideals?
THanks
BTW: The card is only 2 weeks old.
Last edited by securitybreach (2008-11-14 07:26:14)

hi guys,
I had a similar bug on my netbook with the Elantech touchpad. I have reported a bug to the maintainer of the Elantech driver and I get a patch that fix it.
description of my bug:
with two fingers above the touchpad, tap alterrnatively with each finger on the touchpad.
- expected behaviour: the cursor does not move.
- actual behaviour: the cursor jumps sometimes to the left or the right.
this only happens when configuring the touchpad with synaptics (by defaults, mine is detected as a mouse)
is your bug the same than mine ?
are you using both the proto=exps option and synaptics ? (I still have the bug in this configuration)
if it is the same bug, I have submited the patched kernel to AUR

Several issues only with executable, not in VI

Hello, I'm developing a program to control a network analyzer from GPIB, store data, read that data into some matlab (math script) routines to determine pass/fail and plot a pattern, then save a screen-grab of that pass/fail/pattern. Everything works as I expect it to in the development environment, but when I build it into an executable and run it on the same development machine, weird things start to happen that I don't understand. I know from past that executables run faster than vi's so I have added time delays here and there where it seems to make sense for that particular bit of code, but even that has not helped.
There are 3 main issues:
1.) I populate a listbox from a folder with filenames that match a pattern. This works great. There is an event structure that waits for one of the files to be selected which then sends that file into a subvi that runs through the mathscript routines. Problem is in the executable, after this mathscript subvi executes, all the contents of the listbox disapear and I can't select another file to run through the mathscript code. stopping and starting the main app re-reads this in but it should be read in continuously because its in the main programs for-loop.
2.) The mathscript routines were developed by someone else, they are in several nodes. The first two nodes work perfectly to generate 2 patterns, find beam peak, position, and beamwidth, but the next two, which are identical, don't seem to work in the executable. They should produce sidelobe levels, but don't.
3.) The screen-grab bit doesn't work in the executable either, I found a vi from Alex T. (https://decibel.ni.com/content/docs/DOC-19720) that automates a print screen event and then reads the clipboard to output image data which I then save as a jpg or png. This I had to add delays in to get the vi to work, but it still doesn't work in the executable.
Any help or ideas would be greatly appreciated. Even if its just the basics- I'm pretty much self-taught and don't profess to know the best way or even the right way
Jamie
Attachments:
Phase Scanner_S Folder.zip ‏4123 KB
main code.jpg ‏753 KB
mathscript subvi.jpg ‏753 KB

Error code -90093: LabVIEW: The LabVIEW Run-Time Engine does not support this function.
Looks like you are using something that is not available in the RTE.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Weird problem - having issues *only* with 1UP's podca

I subscribe to a lot of podcasts - UP, IGN, TwiT, etc., and they all work fine instead of UP's. However, it doesn't appear to be a problem on their end.
If I download their podcasts via Juice or directly from the web site, they work fine. However, if I download any UP podcast using the Zencast application, the duration of the podcast appears incorrectly while playing it on the Zen. The podcast continues playing past the "end time", however it makes seeking and resuming playback a pain in the butt.
With every other podcast I subscribe to, this does not happen. Any ideas?

It seems to have something to do with the way up handles the podcast information. I've worked out a (slightly) less annoying way of dealing with the issue, although it does require you to have the mp3 handy, so you don't get the convenience of using a podcast organizer.
1) Head to http://audacity.sourceforge.net/download/ and download the Audacity audio editor. (It's absolutely free and really small)
2) Download up podcast
3)Load the podcast mp3 into audacity. (File > Open)
4)Save the podcast as a new mp3 (File > Export as Mp3)
Now just load the file into your Zen, and it should show up as the proper length. Unfortunately, while it isn't the most elegant solution, it's the best I think you'll be able to do, because I believe the problem is on up's end.
Hope this hel
ps.

TS2972 iTunes sharing features issues only with my newest desktop

Hi, hope someone will find an idea about my strange issue
I migrated my iTunes Library on my more recent desktop (OS Windows7 64 Ultimate)
I still have an old desktop (Windows XP Pro 32) and a laptop (Windows Home Premium 64)
My 2 desktops are plugged with CPL (and a switch)
My laptop is either wifi or direct lan to my routeur switch
All of them are authorised in iTunes.
My iTunes Libs from old desktop and laptop are always seen between my iOS devices, my laptop, my old desktop
My main iTunes lib migrated to my most recent desktop is either seen and shared by all my devices, pc
OR... on this desktop it becomes impossible to share or to see other shared library (both shared libs and home shared libs)
it happens when iTunes starts. From the beginning, if sharing works, it works all the time.
If sharing doesn't work, I found a way to make it come back temporarily :
- with iTunes still opened, I activate another network card (for instance my wifi receiver which is disabled by default)
- I close iTunes
- I desactivate my main network card (it's a Realtek from my mainboard)
- I cross fingers
- I restart iTunes
in most cases all my shared libs / homesharing come back. I can see shared stuff from other pc, and i can share to all my network. Then, I activate my Realtek network card and I desactivate the wifi one. Sharing still works.... Until another time when i start iTunes and there is no more sharing features.
Last clue : when i use an app like remote linked to my lib, then I close itunes, then restart, and in the case sharing seems to not work after that, sometimes remote is able to work whereas the library is not broadcasted on my network ... in appearance !
Any idea ? any similar cases ?

Figured out my problem sharing my music library on a new iPad Mini (I think). Two issues: (1) I have two Apple IDs, the result of doing one years ago and forgetting about it when I set up another; Apple doesn't seem to be able to ever merge or otherwise fix this problem, despite the best efforts of smart folks at the Genius Bar plus of course I'm forced to have 3rd ID as my iCloud username, but never mind....). I was logged in as one Apple ID and my music library is under the other. Went to "Music" under settings, signed out under "Home Sharing" on that page, signed in again as the other Apple ID. (2) Realized then that it was trying to share music from something called my iPad library instead of the library under my name, which is where my music is. When I fixed these two things, it all shared nicely. Whew!

Issue only with DE text

Hi Experts,
SRM version is 5.0 and Support pack is SAPKB70009.
WF triggered, workitem sent to user's Lotus notes. If user is German, he sees Subject text as #EBP_GEN# <main subject text>.
But if the workitem is sent to user other than German, he sees the main Subject text properly.
What could be the reason, is it patch level or something else.
Aditya.

Hi
i recommend you to create a OSS message for quick assistance.
there are some threads expain you this issue. i could not search for you now.
please update your message clearly .
with screen shots,
what program you run with variant and language options..
lotus notes details if possible.
definetly you will get reply with answer with in 48 hours.
i am not very sure . but it can be solved easily by SAP by some settings in lotus notes configuration.
let s wait for others reply. honestly i dont know. you can search Pierre vanhohoove name . he might have answered in this forum long back on this issue. good luck..
Muthu

351 Issue only with delivery schedule wise

Similar Messages

Maybe you are looking for