3548-XL-EN to switch with small form-factor pluggable (SFP) ports

Is it possible to connect my 3548 with a WS-G5484 directly to a 3560-24TS
with small form-factor pluggable (SFP) port?
thanks

Yes.. You will need a LC-SC connector. The part number for a 10-Meter Fiber Multimode SX LC-to-SC Connectors is "CSS5-CABSX-LCSC"

Similar Messages

No Audio from HP Compaq 6000 Pro Small Form Factor PC display port

Hi
I have a HP Compaq 6000 Pro Small Form Factor PC that has a display port. I bought a display port-HDMI adapter to use it on my LG plasma TV. The video is fine but i get no audio.
Please what do i need to do? does my display port support audio? The symbol on it has the DP++ sign which indicates it should support audio.
Please assist me.

Hi:
To the best of my knowledge, your PC does not support audio out of the display port.
Check your sound and playback menu in the contol panel, and see if you have 2 HD audio selection choices. If not, you won't be able to get sound out of the display port.
Paul

Random, excruciatingly slow load time with 7900 Elite small form factor desktops

Hi all, I have approx 300 HP 7900 Elite small form factor machines in my environment that were deployed just over two years ago. from the time of deployment we have experienced on about 50 occasions a random, excruciatingly slow load time that take about one hour for the user to login and open their programs. there has been no rhyme or reason for it, different floors, areas of the building, etc. I searched the forum for similar probs and didn't see one like this, I hope I'm not duplicating efforts from someone else's question... One thing we have noticed is that if we re-boot while it is going through the start-up process, it seems to "make it angry" and will lengthen the overall load time. We use the 32-bit Vista Enterprise OS. This is with a "stock" build, that is to say, our standard corporate build. our security policy does not allow users to install software, by the way. Thanks so much if you can help!

Hi,
How is the issue going? Usually, this error can be caused by missing third-party NIC driver. To solve the issue, we can download the missing network
driver and update the WDS boot image to include it.
In addition to the article provided by Chris, the following blog can also be referred to as reference.
http://askmetricks.blogspot.in/2013/03/solvedwdsclient-error-occurred-while.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this
information.
Best regards,
Frank Shen

What replacement power supply for m72e small form factor

Simple question
I have a bunch of lenovo m72e small form factor pc's.
is the power supply a standard tfx or some sort of proprietary system.
I was thinking of upgrading and also preparing for furture failure contingency.

Many thanks for the update. it is as i feared. i hate the proprietary major components.... oh well, thank goodness for ebay.
also, much less important as I figured out how to sysprep a machine to move windows recently. Since our office FINALLY migrated to windows 7 x64; any future upgrades will be fairly easy on a modern OS.
The m72e we purchased have 3 years support build in so it should be a while before I have to worry about servicing them.
Having said all this, the Dell vostro 200 systems we have are 7 years old and trucking along with no service issues so far.
Lenovo machines were cheaper / on sale at the time and dell has since discontinued their vostro line so we tried the switch over on 1/2 our workstations @ the office.
The speed of the system is fine but there are certainly some bios/hardware bugs that we have noted around the network card.
I doubt we will transition the rest of the systems to lenovo at this point. Sure is easy to service when all your systems are from 1 vendor and the exact same lineage though.

How to update firmware for HP Compaq DC small form factor

I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
2. Amt mamagement engine is disabled.

HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
BIOS
Business Desktops BIOS Utilities 4.02 Rev. A
Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
Firmware
Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
Intel PRO/1000 Firmware 1.10 Rev. A
HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
Please identify the exact device you wish to upgrade/update the firmware to.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Dual monitors HP Z200 Small Form Factor Workstation

I am waiting on my new Intel I-5 HP Z200 Small Form Factor Workstation running Windows 7. What do I need to run two monitors?  I believe that there is an HDMI and a DVI video output on the rear - can I run two monitors off of these two outputs or do I need a video card? If I buy a video card do I need one with two HDMI outputs (my preferred connection) or can I use the one on the motherboard and one on an add in card siumultaneously?

Hi,
For that card, with the right connectors and adaptors you can connect to TWO minitors ( Drive up to two 30-inch (2560x1600) digital displays through native dual DisplayPort connectors on a low-profile card.):
    http://www.nvidia.com/object/nvs-310-graphics-card.html#pdpContent=2
Bau you can add an adapter such as:
     https://www.youtube.com/watch?v=ZkbaXkMQrIM
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp pro 3130 small form factor freezing

Hey guys, I recently rolled out a HP Pro 3130 Small Form Factor PC to a client a month ago and they have been experiencing constant freezing. Basically the whole PC locks up and nothing can be done to revive it aside from a complete Power Cycle. As an IT Professional, I have done significant investigation and troubleshooting and have not been able to come to any conclusion. It appears to be completely random with no patterns (eg particular application or time) and happens several times a day. I have done the following: - checked event viewer for errors or warnings (none) - checked to see if a dump file is created (none) - run a CPU Stress test and monitoring the temperatures (max 70C) - run a RAM test (memtest) with no errors reported - run a HDD test (spinrite) with no errors reported - run a windows system file check (sfc) with 100% valid file integrity - downloaded and installed latest drivers - installed latest windows updates I feel I have exhausted all options short of either a complete OS reload (i would prefer not to do) or a warranty return. Any ideas?

Hello RTerrell,
If your computer is locking up and there are bands of lines going down the screen then something is failing hardware wise
1. Memory
2. Video Card
3. Power Supply
There could also be bulging capacitors on the boards.
The best thing is to start ruling out hardware components by swapping in new ones. The power supply being the first easy one. Then try with one stick of RAM at a time, try replacing the RAM with other RAM. Finally replace the video card. If it's still failing after that then it may be the motherboard, but I'm hesitant to think that.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Dekstop DC7800p Small Form Factor system

Hi,
I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes.
Is there a way to do one of the following:
- force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
- force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
Any advice would be greatly appreciated.

After doing some research on the message, I came across this post.
Apparently, your PC has a smart card optional system (maybe it was government surplus).
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC, but that one.
You may want to post your issue on the HP business support forum, business PC section. Hopefully someone there has experience with turning this feature on or off.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
RichS hasn't replied to a post in 3 years. Although someone else may.
Good luck, and please post back if you find the solution to the problem.

No sound output on installing a hdmi support graphics card on HP Compaq dc5800 Small Form Factor

when i inserted a HDMI support graphics card on g-force nvidia on my HP Compaq dc5800 Small Form Factor no audio output was availabe i need a support for this problem

You will have to switch the sound Playback from Speakers to the Digital Audio output.
Disconnect the speakers from the default output at the rear of your PC. Sound will be output through the HDMI cable to the device it is connected to if the video device has HDMI sound capability. If you have it connected to an HDTV it should not be an issue. All you will have to do is use the TV's menu to accept the computer input instead of cable.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP ProDesk 400 G1 Small Form Factor Business PC using vga and dvi at the same time.

Looking into purchase a HP ProDesk 400 G1 Small Form Factor Business PC which has a VGA and DVI-D ports on the integrated video card. Can you use both ports simultaniously. one screen connected to vga and a 2nd monitor connected to the DVI port?

Hi,
You might get better assistance on the HP Enterprise Business Forum.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Peer-Switch with vPC and non-vPC Vlan Port-Channels

Hi,
in a design guide i have noticed that it is best practice to split vPC and non-vPC vlans on different inter-switch port-channels. Now, if i want to use the Peer-Switch function, but the port-channel interface of the non-vPC-vlan channel moves into blocking state. The option spanning-tree pseudo-information has no influence. Is peer-switch possible in my kind of topology?
Greeting,
Stephan

I believe absolutly possible. specifically coz peer-switch and spt pseudo-info are specific and local to cisco fabric services running as part of vpc technology. Personally me has lab with vpc-domain compounded of 2 N5Ks. They are peer-switches with spt-pseudoinfo and they have MST running on non VPC links independantly from vpc.

No Sound - DC7600 Small Form Factor with Windows 7

I've searched through this forum but no other solutions helped ...
I just bought one of these second hand and installed Windows 7 on it. No sound comes from the inbuilt speaker, although in Device Manager it says it has the drivers and that they're working correctly.
The little speaker at the bottom has a red cross over it as if it's muted. When I click on that I get this message;
"The peripheral does not appear to be plugged in. Check the connection. Proceed to next step to finish."
And it tells me to plug headphones in?
Tried looking on the HP website for drivers but it only goes up to Vista. I've also run Windows update and installed every update available but still nothing.
Any chance of the sound working on this PC with Win 7?
Thanks in advance

Hey i just ran into this same problem, but was able to solve it.
1) Download the most recent windows vista 32bit audio drivers from here. (or navigate to the page on HPs website yourself)
2) Once downloaded, run the file. The install will fail but will create the folder "swsetup" on your "C" drive.
3) Open up control panel --> system and security --> Device Manager
4) Under "Sound, Video, and Game Controllers" right click the audio device that appears and choose "Update Driver Software"
5) Click "browse my computer for driver software".
6) Click "Browse" and navigate to "C:\swsetup\SP35288\Vista", click "OK" and then "next"
7) The driver should then begin installing.
This process worked for me, and I hope it works for you too.

Blackscreen with flashing cursor HP small form factor dc700

PC is tidning on with the blue HP logo. After that windows 7 does not respond. It is just a black screen with a flashing cursor. In the start you can't ser any BIOS option or comand. What should i do?

Get to a Command Prompt in Safe Mode if you can and type: Bootrec.exe/fixmbr
You may also try a repair disk that you can create on another computer running Windows 7.
If nothing works you will have to perform a Factory Restore either through the recovery partition or recovery disks.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

A smaller form factor for iPhone

I might be interested in a smaller iPhone. For example, it would be great if a new iPhone would be reduced to the size of the pure display area of iPhone 4. It is then handier, more convenient to put into your pants pockets. I'd believe there should be a way of collapsing the outer area into somewhere underneath the display area. An iPhone nano or iPhone pocket.

"Apple or any of its employees do not accept or consider unsolicited ideas, including ideas for new advertising campaigns, new promotions, new or improved products or technologies, product enhancements, processes, materials, marketing plans or new product names. Please do not submit any unsolicited ideas, original creative artwork, suggestions or other works (“submissions”) in any form to Apple or any of its employees. The sole purpose of this policy is to avoid potential misunderstandings or disputes when Apple’s products or marketing strategies might seem similar to ideas submitted to Apple."
http://www.apple.com/legal/policies/ideas.html

M58p 7479-RS2 Small Form Factor PC - Recommendations For Operating System

Hi
I am having trouble working out which Operating System to get for this older computer (produced in 2008 I think).
The closest model to it I can find, on Lenovo's web site is the M58p 7479-RS1.
This shows several firmware updates and a BIOS update but I need an Operating System to begin this process really, and not knowing which one to get is annoying.
Could someone shed some light on a good one to get for this pedigree of machine ? ...
Thanks in advance,
Matt McAllum.
Solved!
Go to Solution.

Some versions of that system were sold with Windows 7, and drivers are available, so that would be my suggestion. If you won't be upgrading beyond 2GB, then use 32-bit; 4GB or more, use 64-bit.

3548-XL-EN to switch with small form-factor pluggable (SFP) ports

Similar Messages

Maybe you are looking for