-36 an I/O error when compressing MP4 files
I am using QT 7 Pro and attempting to compress MP4 files so as to load them on my iPhone without large file sizes. When compressing via export --> Movie to MPEG-4 --> MP4 --> MPEG-4 Basic it will get to 99% and then give me the below error:
-36 and I/O error.
Please advise how to resolve this or perhaps a better way to compress MP4 files for use on the iPhone
I did examply same and getting same error anytime I tried to open a file. Did you get any response on the issue, that may help me?
Thanks Claire
Octavio
Similar Messages
-
Error when compressing domain file
This is probably a rare one, but I'll give it a shot anyway.
I just recently started getting an error message stating +"An error occurred adding "" to the archive"+ when compressing an iWeb domain file. Long story short, I pass this file back and forth with a business partner, and to help maintain its integrity, and to be able to upload it to and from iDisk, we compress it first.
Here's a screenshot of the error... http://gallery.me.com/airrocker#100141/Picture-201&bgcolor=black
Logging out and back in will allow the file to be compressed with no issues.
I'm running 10.5.8 and iWeb '09 v. 3.0.1. Any help is appreciated.
Thanks.This is probably a rare one, but I'll give it a shot anyway.
I just recently started getting an error message stating +"An error occurred adding "" to the archive"+ when compressing an iWeb domain file. Long story short, I pass this file back and forth with a business partner, and to help maintain its integrity, and to be able to upload it to and from iDisk, we compress it first.
Here's a screenshot of the error... http://gallery.me.com/airrocker#100141/Picture-201&bgcolor=black
Logging out and back in will allow the file to be compressed with no issues.
I'm running 10.5.8 and iWeb '09 v. 3.0.1. Any help is appreciated.
Thanks. -
File error when importing .mp4 files
Hi there,
I have a problem concerning importing files.
I had some .mkv files, which I converted to .mp4 files with just 1 audio track and no subtitles using Handbrake.
Problem is, I can't import these files into Final Cut Pro 7.
It gives the following error:
"File error: 1 file(s) recognized, 0 access denied, 1 unknown."
I have no problem importing .avi files, or .mp4 files that haven't been converted.
Does anyone know what I should do? I don't know any other program to convert .mkv files, so basically, I'm bound to using Handbrake.
Thanks in advance!!I didn't know Handbrake was such a bad tool.
I never did much video-editing before, so I usually used iMovie, and the Handbrake-converted files worked fine with that.
And I did what you said, I converted the video to .mov with MPEG Streamclip, using the mentioned presets, but now I have another problem.
A 22 minute file, which was 360MB before converting, turned into a 6.2GB file after converting.
Since I use videoclips from a TV Serie, which has over 60 episodes, this is going to cost a lot of space. Is there any way to reduce the filesize without destroying the video quality, or is there any, ANY, way to make FCP accept .mp4 files?
I don't care if it slows down my Mac or anything, it's just that I know it's possible, with the 700MB file from one of my posts above. -
I get this error message that pop up when I try to import:
"File Error: Unknown File"
What is the requirement for .mp4 or .mov files in order to have it imported to FCP? Also I have another large file that can be imported, but when I play it in the edit area, it lags and the video doesn't play smoothly....would I need to compress or would I need to convert to a certain frame per sec or something?Try opening up the video in QuickTime and export using the same codec, but make sure to select what the frame rate is (such as 29.97) and see if you can import it then.
Dave -
Error in InfoPackage: Error when uploading Flat Files
Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps. -
i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt. -
Multiple JavaScript errors when opening aspx file in Dreamweaver
I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."
Hi Steven,
Not sure if this is related, but can you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran -
Error when creating ZIP file (return value 2 when IGS was called)
Hello All
I attempted to Schedule a Query to the Portal folders and executes fine. However when it's scheduled to and email, I am getting this message
'Error when creating ZIP file (return value 2 when IGS was called)'
Any ideas?
Thanks ...BKHello Kai
Thanks very much for the info. how would I know what patch the IGS is?
Thank you.
Regards..BK -
SnS and MXE3500 throwing encoding error when uploading MP4
I have a user uploading an MP4 File that was encoded as MPEG-4 Base Media /Version 2. [email protected] (MediaInfo file attached).
The MXE fails with the following error
Prefilter failed: Error [5]:
Input file error detected
(Server is unable to open input file "c:\dms\input\02f95d4e-b3e3-454a-931c-a4192b2383fd_bpaandmeaningfuluse.mp4". Unsupported input file format.)
[EC_COMPLETED] Task Execution 1052 is now complete. Reason = Failed.
We can upload other MP4 files without issue. I think this video comes from camtasia.
Any ideas on how we can resolve this issue w/o re-encoding the file?
Thanks
RBHello
1- Can you share your Cisco MXE verison ?.
2-Cisco MXE 3500 support , MP4 (H.264/AVC, MPEG-4, XDCAM EX), Kindly check the below links
http://www.cisco.com/c/en/us/products/collateral/video/mxe-3000-series-media-experience-engines/q_a_c67-565668.pdf
http://www.cisco.com/c/en/us/products/collateral/video/mxe-3000-series-media-experience-engines/data_sheet_c78-565206.html
3-Kindly share with me the video , if you do not mind .
Thanks
please rate all useful information -
Internal server error when adding a file item
Hi Gurus,
We have Portal 9.0.2.0.1. We add all our documents to portal as file item. I am getting the following error when I try to add a file item. The file size varies from 1 MB to 10MB. It's all .pdf or .doc files. I am able to add 1 or 2 files, then I get this error.
please post a reply if you have any idea about this one.
Thanks
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle HTTP Server/1.3.22 Server at prtl.nw.us Port 7778I suggest that you log a TAR and work with Oracle Support on resolving this problem.
Regards,
Jerry
PortalPM -
Hello
What could be the problem that I get this error when deploying my ear file with a web service within.
[#|2008-03-29T17:43:02.640+0100|SEVERE|sun-appserver-pe9.0|javax.enterprise.system.tools.deployment|_ThreadID=12;_ThreadName=Thread-26;_RequestID=0a164c90-57bc-4d4a-8b3f-270fc4584891;|Exception occured in J2EEC Phase
com.sun.enterprise.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- C:\Sun\AppServer\domains\domain1\generated\xml\j2ee-apps\agency_app\agency_jar\META-INF\wsdl\AgencyModuleWebServiceService.wsdl (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161)
at java.net.URL.openStream(URL.java:1007)
at com.sun.enterprise.webservice.WsUtil.generateFinalWsdl(WsUtil.java:699)
at com.sun.enterprise.webservice.WsUtil.generateFinalWsdl(WsUtil.java:643)
at com.sun.enterprise.deployment.backend.WebServiceDeployer.doWebServiceDeployment(WebServiceDeployer.java:165)
at com.sun.ejb.codegen.IASEJBC.doCompile(IASEJBC.java:855)
at com.sun.ejb.codegen.IASEJBC.ejbc(IASEJBC.java:580)
at com.sun.enterprise.deployment.backend.EJBCompiler.preDeployApp(EJBCompiler.java:339)
at com.sun.enterprise.deployment.backend.EJBCompiler.compile(EJBCompiler.java:222)
at com.sun.enterprise.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:359)
at com.sun.enterprise.deployment.backend.AppDeployer.deploy(AppDeployer.java:214)
at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:129)
at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:169)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:266)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:739)
at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:174)
at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:210)
|#]when I deployed this application on a custom domain setup, it does not fail. But it fails on default domain.
Regards
MichaelHow did you create your datasource, can you post the content, without passwords of course.
Greetings. -
Weblogic 10.3.2 Error when deploying ear file
Using WLS 10.3.2, wwhen activating changes, I obtain following errors:
An error occurred during activation of changes, please see the log for details.
Exception occured while downloading files
[DeploymentService:290066]Error occurred while downloading files from admin server for deployment request "1,285,335,764,675". Underlying error is: "[DeploymentService:290065]Deployment service servlet encountered an Exception while handling the deployment datatransfer message for request id "1,285,335,764,675" from server "p8aerm". Exception is: "Could not create temp location for application : Engine-wl"."
Would someone with expertise confirm where "temp location for application" is on an AIX 6.1 server.
Any help appreciated.What user runs your weblogic? the oracle user?
In my case weblogic is started by a weblogic user who owns all the WLS folders.
Try $> ps -fea | grep p8ce to verify the user running the weblogic instance.
In a RH5 the privileges are (755):
4 drwxr-xr-x 2 weblogic weblogic 4096 Nov 19 2009 .internal
4 drwxr-xr-x 5 weblogic weblogic 4096 Nov 19 2009 WLinternal
4 drwxr-xr-x 8 weblogic weblogic 4096 Nov 23 2009 ..
4 -rw-r--r-- 1 weblogic weblogic 379 Sep 20 16:53 WebServiceUtils.ser
0 -rw-r--r-- 1 weblogic weblogic 0 Sep 20 16:55 SysAdmServer.lok
4 drwxr-xr-x 5 weblogic weblogic 4096 Sep 21 19:28 .
4 drwxr-xr-x 6 weblogic weblogic 4096 Sep 21 19:28 WLuser
The folder WLuser will be created when the deploy starts.
In your case an error happends before this step. -
Error when uploading par files - Exception
Hi all,
I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is:
Messages:
INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par
INFO: Application successfully stored in the PCD
Messages from Server ID 8657950
ERROR: Operation failed: The archive com.sap.pct.hcm.attendanceoverview has not been deployed.
ERROR: Exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem.prepare]: com.sap.pct.hcm.attendanceoverview
The error is displayed in the administration console. The logs don't say anything useful. I'm getting a few exceptions about finding archives and this error message: get data source CVERS failed! Trying SAP/BC_UME...
I have checked the rights to all directories and the directory structure. We're running EP6.0 with SP 9.
Thanks for your time.
regards,
DionHi Dion,
i would think that SAP tries to stop uploads of par files which should be installed with them SDM or import of a whole package.
Try the following :
- rename the par file name from com.sap.... to something else...
or :
- import the par into Developer Studio and change the project name
change/delete the META-INF files
Another question : why do you want to install only certain elements of the MSS package ?
Regards,
Kai -
Rapid install gettin error when create control file
hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons -
Solr errors when indexing custom file extensions.
Greetings!
I am working on my company's public website and need to be able to index the web pages. The site is configured to read .ak files as .cfm files, but Soler errors when trying to read them. While testing I found that if I remove the <head> tags from the documents there are no errors. I've looked into the Solr config files for a location to tell Solr that .ak files should be parsed as html. I have been unable to find such a setting, does one exist?
Thanks for your help,
DaveHi,
Are you able to manually add new extension to the list?
Try the troubleshooter under “Advanced Options” or rebuild the index for a test.
If doesn’t work, then let’s go deeper for this issue.
Open registry, expand, HKEY_CLASSES_ROOT
Under this entry, there should be a bunch of file types, I did a test, if I delete a file type in it, for example .txt, then when I open the index option again, advanced option, file type, I’ll no longer find the txt extension in the list, so you may check
the keys in case the registry is broken.
Regards
Yolanda
TechNet Community Support
Maybe you are looking for
-
My mac doesn't connect to my home network by default
My computer doesn't connect to my Airport basestation by default. The WiFi at the top bar is not connected, if I click on the WiFi symbol I see my connection and 2 of my neighbors, but none are connected by default. I always have to manually select m
-
can you help in downloadinfg firefox without the security system
-
My iMessages won't let me sign in!
Earlier today, iMessages was working on my iPhone 4 and iPad 4thGeneration. However, suddenly it stopped working. So i shut iMessages off and turned it back on. It requested my apple ID. And won't sign me in... I am sure to have the right email and p
-
Newly installed PS CS6 closes immediately after opening?
I just installed the adobe cs6 creative suite yesterday or the day before, but today was the first time I tried to launch PS. Each successive time that I've tried, I have gotten these two messages immediately after the program finishes loading: I can
-
My IMac wont wake up after sleep mode
Every morning when I want to wake my IMac from the sleep mode I have to restart it because it is impossible to open it. I tried the keyboard and the mouse but nothing works. Please help