3640 ERROR in NVRAM sizing. NVRAM could be bad!
Can this be fixed, I cant get out of rommon mode. I desperatly need this router for practice so if anyone can help I would appreciate it.
3600 Software (C3640-JS-M), Version 12.0(13), RELEASE SOFTWARE (fc1)
Compiled Tue 05-Sep-00 21:39 by linda
Image text-base: 0x60008918, data-base: 0x60C10000
ERROR in NVRAM sizing. NVRAM could be bad!
Hardware indicated 131072 bytes. Software detected 0 bytes.
Using 0 bytes.
=== Flushing messages () ===
Queued messages:
00:00:02: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:01: %C3600-3-BADNV: Detected invalid NVRAM size: -2056 bytes
No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
*** System received a Bus Error exception ***
signal= 0xa, code= 0x8, context= 0x61176310
PC = 0x602642f4, Cause = 0x20, Status Reg = 0x34018002
environment write to NVRAM failed
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
Warning: monitor nvram area is corrupt ... using default values
ÿ
ERROR in NVRAM sizing. NVRAM could be bad!
Hardware indicated 131072 bytes. Software detected 0 bytes.
Using 0 bytes.
C3600 processor with 65536 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Hi
The following error message indicates the presence of a faulty NVRAM:
ERROR in NVRAM sizing. NVRAM could be bad!
Hence, this can be rectified by replacing the chassis.
Regards
Sush
Similar Messages
-
Hi,
I'm Getting Error in router from NVRAMwhile accessing below command in privilge 4 login
CTS-SEC-CBE#sh configuration
Using 14350 out of 262144 bytes
%Error opening nvram:/startup-config (Permission denied)
The error not observed while executing the command through privilege 15 login
RegardsHi,
Please find the show version
Router#sh version
Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 23-Mar-12 21:00 by prod_rel_team
ROM: System Bootstrap, Version 15.1(1r)T4, RELEASE SOFTWARE (fc1)
CTS-CBE-PRINEW uptime is 1 week, 1 day, 13 hours, 41 minutes
System returned to ROM by power-on
System restarted at 08:19:26 IST Sun Oct 7 2012
System image file is "flash0:c3900e-universalk9-mz.SPA.152-3.T.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE250/K9 with 740352K/308224K bytes of memory.
Processor board ID FGL1636129B
6 Gigabit Ethernet interfaces
DRAM configuration is 72 bits wide with parity enabled.
256K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 C3900-SPE250/K9 FOC16344GDA
Technology Package License Information for Module:'c3900e'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data datak9 Permanent datak9
Configuration register is 0x2102 -
%Error opening nvram:/startup-config (Permission denied)
I'm getting an odd error, permission denied trying to issue "show config" at user level. We use this throughout the environment with no issues.
IOS: System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T.bin"
R1#sh run | i aaa
aaa new-model
aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting commands 15 default stop-only group tacacs+
aaa session-id common
R1#sh run | i priv
privilege exec level 1 traceroute
privilege exec level 1 ping
privilege exec level 1 show logging
privilege exec level 1 show configuration
privilege exec level 1 show privilege
privilege exec level 1 show
R1#disable
R1>show config
Using 11855 out of 262136 bytes
%Error opening nvram:/startup-config (Permission denied)You are indeed allowed to run the command (as evidenced by the fact that the command did run).
show config is effectively an alias for the command more nvram:startup-config
As a result, the issue is the permission on the file, not the command itself.
Unfortunately, the file systems do not explicitly support permissions. This used to be implicitly supported through permissions on show config.
Perhaps this is a bug. I'd open a case on this if you need really need this feature. -
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
ThanQ SO very much!
[email protected] or [email protected] or [email protected] .
You can also find me on Facebook, my given name is Tiffinie Trimmer, &
that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
as marking this page in my FAVORITES so I can find it fast! Take Care!!!I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
I'm on a mac running 10.6.8, was using Firefox 6.02 when the problem started, i performed a clean install of 7.01, installed the latest Flashplayer, and reinstalled java (the 10.6.5 update file from apple's site).
I seem able to load video at youtube.com, and was able to load web-based irc chatrooms at ircchat.tv. however, at jamplay.com a paid member site, all of the lessons are flash video, and there's a live video feed chat room that is also flash based, and I am not able to view this content. the video content pops up the error message "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect?
URL: /includes/javascript/xajax_js/xajax.js" and the clicking on the "launch chatroom" button does exactly nothing.
I have contacted the jamplay site team but their recommendations are the steps I have already taken, mentioned above, that did not resolve the issue.
some links to content on their site visible without being a member:
http://www.jamplay.com/
this one has a flash interface that, if things were working, would have a video in the center and members and staff talking abouth that area of the site when you click on one of the title buttons. Now that I am having this problem, nothing is clickable and there's no indication that there should be a video in the center. The error message regarding xajax does not come up at all.
http://www.jamplay.com/guitar-lessons/beginners/1/527-16-circle-of-fifths
same thing. video content is missing, xajax error does not appear.
http://www.jamplay.com/live
when I load these all content except the video loads on the page. this page does not give me the error at all, just does not load the video
I can't seem to recreate the actual error without being logged in as a member of the site.
The apple support team gave me a one-time free suppport ticket to troubleshoot an ethernet issue I was having. Unfortunately, the databases I removed were not deemed either by apple or me to be noteworthy or necessary to retain (all of them were for software I not longer have or use). I don't know which plist file might have been the one I need now. I did reinstall the java and flash items. The only other item that I think it might be is a set of belkin router software that I uninstalled because i'm not using any belkin hardware anymore.
If someone has any kind of idea I would be most appreciative.That's a comment in the file. It has no effect at all.
-
Error : ORA-06508: PL/SQL: could not find program unit being called
Hi
I got surprise issue while testing my Oracle code . Let me explain first the environment detail . Our appliaction built on
Java/J2EE(Weblogic) and backend is Oracle 11g re2 . While calling from java it call thru different user which have been provide
synonym and exectue option for corresponding procdure ,
I created on package EXTRACT_CUSTOMER_INFO_PK which will exract data to text file using UTL_FILE ( direcory , UTL_FILE grant is provided to DB user).
Now this package has been called from rp_execute_procedure_pr -- Here I is the code
CREATE OR REPLACE PROCEDURE RP_EXECUTE_PROCEDURE_PR
i_atlas_job_schedule_fk IN atlas_job_schedule.atlas_job_schedule_pk%TYPE,
i_job_id IN atlas_job.job_id%TYPE,
i_parm_value IN atlas_job_schedule.parm_value%TYPE,
o_status_code OUT NUMBER,
o_status_mesg OUT VARCHAR2
IS
-------Other old code which is not relevent for this issue ----
--------Other old code which is not relevent for this issue ----
----Below code I added ----
ELSIF l_job_id = 'CUST_EXTRACT' THEN
EXTRACT_CUSTOMER_INFO_PK.customer_report ( i_parm_value ,
o_status_code,
o_status_mesg ) ;
-- o_status_code := -99999999;
--o_status_mesg := 'PARTHA PARTHA PARTHAcess terminated!';
ELSE
o_status_code := -20300;
o_status_mesg := 'Job Id : ' || l_job_id || ' NOT found. Process terminated!';
END IF;
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Processing End Time (GMT): '
EXCEPTION
WHEN eProcError THEN
o_status_code := SQLCODE;
o_status_mesg := SUBSTR(vMsg ||'-'||SQLERRM, 1, 200);
WHEN OTHERS THEN
o_status_code := -20300;
o_status_mesg := SUBSTR(SQLERRM, 1, 200);
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Error : '||SQLERRM||' '
update_log_auto
ajs_rec.atlas_job_schedule_pk,
'Processing End Time (GMT): '
END RP_EXECUTE_PROCEDURE_PR;
Now It compiled sucesfully . And while I did SIT then RP_EXECUTE_PROCEDURE_PR run fine and extracted txt file . But while I called it from Java procedure It gives us error like
Error : ORA-06508: PL/SQL: could not find program unit being called 02-AUG-2012 13:16:51.
As I told RP_EXECUTE_PROCEDURE_PR old proc and used by other proc , So I first suspect issue is newly added code or may be some grant or synonym ( Although it should not be )
so I created public synony amd gave execute grant to my pkg to public .
But it repeat same error .
I did lot of R&D on my pkg but nothing happen . Finally I remane my new pkg RP_EXTRACT_CUSTOMER_INFO_PK and it works fine
I need to know what is the RCA for it . I donot think any dependecy issue as renaming pkg is working fine .
NB my DB user is iATLAS and Javauser is SUDEEP
Thanks in Advance
Debashis MallickFirst of all If i run the main procedure in like below in my Schema it is working fine
begin
-- Call the procedure
rp_execute_procedure_pr(i_atlas_job_schedule_fk => :i_atlas_job_schedule_fk,
i_job_id => :i_job_id,
i_parm_value => :i_parm_value,
o_status_code => :o_status_code,
o_status_mesg => :o_status_mesg);
end;
So thre is no question of parameter .... or Invalid state etc . If it is parameter or Invalid state issue it will give other error.
Here problem is not syntax issue .
let me give u more detail regards this issue
1.. All objects corresponding to procedure all Valid
2.. If I test on the proc on my schema like above code . It works fine
3.rp_execute_procedure_pr is a old procudere which called for differner report generartion based on parameter passing . Also as extract_customer_info_pk called with in rp_execute_procedure_pr So there is no question of synonym or privilage issue for new procedure.
4. Suprising thing is if I rename and recreate package like extract_customer_info_pk _1 or rp_extract_customer_info_pk . Which are exactly same as extract_customer_info_pk and replace those new one with extract_customer_info_pk then it work fine in my java application
I think I make it clear the issue
Edited by: debashisora on Aug 3, 2012 5:31 AM
Edited by: debashisora on Aug 3, 2012 5:40 AM -
Can't open web addresses from an email-get an ERROR message saying-no application could be found
Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!
-
I am having trouble downloading Itune, icloud etc onto my Windows 7 PC and keep getting the following error message "this installation pack could not be opened, verify that the package exists and that you can access it"
tried downloading the quicktime installer, I get the same message with it too
-
Error: The e-mail server could not be reached when the system was trying to
Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MSHi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM -
i have an apple 3g, tried to upgrade it to a 4.2 version, (previously it was 4.1). it wasnt successful, the computer asked us to restore it to the version which was last operational, and while restoring an error message appeared "the iphone could not be restored, an unknown error occured
"This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."
Taken directly from this article http://support.apple.com/kb/TS1275.
Plug your iPhone into iTunes and update it to the latest supported version, which is 4.2.1.
- Greg -
Error: failed to prepare transaction (could not satisfy dependencies)
Hi,
I was going to install a winff package (a GUI front end to ffmpeg for converting between video formats), but when I ran yaourt -S winff and tried to install it refused because it isn't for the x86_64 architecture. So I decided to edit the PKGBUILD and perhaps try to force it anyway, but then I saw that the PKGBUILD is actually getting the precompiled RPM package and as I checked, while there was no precompiled 64bit version of the RPM there was one for a deb version that is offered on winff site.
Since deb's are just archives I ended up, after a few tries, with this PKGBUILD which uses ar and tar commands to get to the binaries inside of the amd64 deb:
# Contributor: yugrotavele <[email protected]>
# Modified by libervisco for x86_64
pkgname=winff-amd64
pkgver=0.42
pkgrel=1
pkgdesc="GUI for ffmpeg"
url="http://www.winff.org"
license=('GPL')
depends=('ffmpeg gtk gdk-pixbuf')
makedepends=('')
source=('http://winff.googlecode.com/files/winff-0.42-amd64.deb')
arch=('x86_64')
md5sums=('1febf5fd19fa76bdc1da06d3e6c4d3b8')
build() {
ar vx winff-0.42-amd64.deb
tar xvzf data.tar.gz
install -Dm755 $startdir/src/usr/bin/winff $startdir/pkg/usr/bin/winff
install -Dm755 $startdir/src/usr/share/winff/presets.xml $startdir/pkg/usr/share/winff/presets.xml
install -Dm755 $startdir/src/usr/share/winff/winff.png $startdir/pkg/usr/share/winff/winff.png
So what I basically do is run yaourt -S winff and when it asks whether I want to edit it, I edit it and replace the original PKGBUILD content with above.
It successfully runs the build() commands, finds and installs the dependencies, but when it's time to install the actual new winff package is throws up this:
loading package data...
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: winff: requires ffmpeg gtk gdk-pixbuf
I don't get it. It installed all the dependencies (and I even checked whether winff works in one of the earlier tries when I manually installed gdk-pixbuf when the binary asked for it). What does it want now?
Here is the whole process:
[daniel@memeport ~]$ yaourt -S winff
==> Downloading winff PKGBUILD from AUR...
Comment by: yugrotavele on 20080518 [04:36:56]
A nice GUI frontend for ffmpeg.
First Submitted: Sun, 18 May 2008 04:28:31 +0000
Last Updated: Mon, 30 Jun 2008 04:23:08 +0000
winff 0.42-1 (Unsupported): GUI for ffmpeg
==> winff dependencies:
- ffmpeg (already installed)
- rpmextract (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
Please add $EDITOR to your environment variables
for example:
==> Edit PKGBUILD with: (replace gvim with your favorite editor)
==> Edit ./PKGBUILD with: gedit
==> winff dependencies:
- ffmpeg (already installed)
- gtk (already installed)
- gdk-pixbuf (package found)
==> Continue the building of 'winff'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
==> Making package: winff 0.42-1 (Tue Jul 1 21:34:12 CEST 2008)
==> Checking Runtime Dependencies...
==> Installing missing dependencies...
resolving dependencies...
looking for inter-conflicts...
Targets: gdk-pixbuf-0.22.0-4
Total Download Size: 0.00 MB
Total Installed Size: 0.70 MB
Proceed with installation? [Y/n]
checking package integrity...
(1/1) checking for file conflicts [############################################################] 100%
(1/1) installing gdk-pixbuf [############################################################] 100%
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading winff-0.42-amd64.deb...
--2008-07-01 21:34:13-- http://winff.googlecode.com/files/winff-0.42-amd64.deb
Resolving winff.googlecode.com... 64.233.187.82
Connecting to winff.googlecode.com|64.233.187.82|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1383594 (1.3M) [application/x-archive application/x-debian-package]
Saving to: `winff-0.42-amd64.deb'
100%[=============================================================================>] 1,383,594 191K/s in 7.4s
2008-07-01 21:34:21 (183 KB/s) - `winff-0.42-amd64.deb' saved [1383594/1383594]
==> Validating source files with md5sums...
winff-0.42-amd64.deb ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
x - debian-binary
x - control.tar.gz
x - data.tar.gz
./usr/
./usr/bin/
./usr/bin/winff
./usr/share/
./usr/share/doc/
./usr/share/doc/winff/
./usr/share/doc/winff/copyright
./usr/share/doc/winff/winff.pdf
./usr/share/doc/winff/README.txt
./usr/share/doc/winff/README-Icons.txt
./usr/share/doc/winff/README-Presets.txt
./usr/share/doc/winff/changelog
./usr/share/applications/
./usr/share/applications/winff.desktop
./usr/share/winff/
./usr/share/winff/winff.png
./usr/share/winff/presets.xml
./usr/share/winff/languages/
./usr/share/winff/languages/winff.es.po
./usr/share/winff/languages/winff.nl.po
./usr/share/winff/languages/winff.fr.po
./usr/share/winff/languages/winff.pb.po
./usr/share/winff/languages/winff.tr.po
./usr/share/winff/languages/winff.de.po
./usr/share/winff/languages/winff.zh.po
./usr/share/winff/languages/winff.it.po
./usr/share/winff/languages/winff.pt.po
./usr/share/winff/languages/winff.pl.po
./usr/share/winff/languages/winff.bg.po
./usr/share/winff/languages/winff.po
==> Tidying install...
-> Removing info/doc files...
-> Compressing man pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: winff (Tue Jul 1 21:34:22 CEST 2008)
==> Continue installing 'winff'? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ----------------------------------------------
==>y
loading package data...
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: winff: requires ffmpeg gtk gdk-pixbuf
==> WARNING: Your package is saved in /tmp/winff-0.42-1-x86_64.pkg.tar.gz
I tried doing it without changing the package name to winff-amd64, but same thing happens. What's going on?Ahh man, and that's it! It works.
I'm just wondering now how can I contribute this PKGBUILD to AUR, but I can read that in the wiki too.
Thanks! -
One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation. -
I just replaced my iPhone 5 because of a cracked face. I backed up the old phone to iTunes. When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone. Now what?
I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this. They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!
-
I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"
The vCard must not be a compatible format. (Unfortunately, there are multiple formats.)
Often your carrier can transfer contacts between devices from different manufacturers. Try visiting your carrier's retail outlet and see if they can do this for you.
Maybe you are looking for
-
Can i share mac mini's SD drive on a iMac G5? The reason is my iMac G5's SD drive is not working properly, it says "DVD DRIVE NOT FOUND" after updated from OSX 10.4.0 to OSX 10.4.2. I need to reinstall my OS and hopefully it can fix the DVD drive pro
-
I am using a Seagate backup plus portable drive as my time machine backup on my iMac 7 with OSX 10.9.2 Mavericks. At startup I always get popup window stating "The disk you inserted is not readable by this computer..? I click ignore and everything
-
Clip imported into iMovie has no sound
I have recently upgraded from Snow Leopard to Lion (actually had to have a fresh OS Lion install at Apple Store and restore from Time Machine). I have imported three clips from my Sony DCR DVD-201 camcorder but they have no sound. The clips play fi
-
Why Net.SOAP.request leads to NotAllowedError?
Hi Everyone, I have defined Documen-level script which makes a web service call to locally (on the same machine) hosted web service. When I try to call it I get: NotAllowedError: Security settings prevent access to this property or method. Net.SOAP.r
-
Problem with sales order update from MIGO ( using BADI)
I have written a BADI while doing MIGO, through which I am updating Sales order Order Quanity. I am able to update the Quantity successfully in sales order, but I am getting following update termination message which is mentioned below. "Sales Orde