3640 radius aaa cannot record g723 , only record g729

All
I am using 3640 gw T1 h323, and with taiwan endpoint fxs,
however the radius server can only record the call during when I use g729 codec.
If I use g723 codec, the call during is 0...?
What is my problem??

go through the following link....
http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_chapter09186a00802a09ee.html

Similar Messages

Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
Host Name : SRV-DATA
Primary Domain Suffix : internal.local
DNS server list :
192.168.0.50, 192.168.0.42
Sent update to server : <?>
IP Address(es) :
192.168.0.99
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
for this name does not support the DNS dynamic update protocol.
To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
the update fails within a few seconds.
Source: DNS Clients Events
Event ID: 8018
User: NETWORK SERVICE
This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
to me so reaching out now to see if anyone has any ideas?
Environment:
- Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
- Windows Server 2012 R2 Client machines (Physical and Virtual)
- Windows Server 2008 R2 Client machines (Physical and Virtual)

The zone is configured as "Secure Only"
The PDC is the SOA for the zone
I dont have a packet capture from the DC, only the client.
The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
NotifyServers :
SecondaryServers : {10.2.0.3, 10.2.0.5}
AllowedDcForNsRecordsAutoCreation :
DistinguishedName : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
IsAutoCreated : False
IsDsIntegrated : True
IsPaused : False
IsReadOnly : False
IsReverseLookupZone : False
IsShutdown : False
ZoneName : internal.local
ZoneType : Primary
DirectoryPartitionName : ForestDnsZones.internal.local
DynamicUpdate : Secure
IsPluginEnabled : False
IsSigned : False
IsWinsEnabled : False
Notify : NoNotify
ReplicationScope : Forest
SecureSecondaries : TransferToSecureServers
ZoneFile :
PSComputerName :
CimClass : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
CimInstanceProperties : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
CimSystemProperties : Microsoft.Management.Infrastructure.CimSystemProperties

Cannot record through line-in in bootcamp MBP late summer '09 model

cannot record through line-in in bootcamp MBP late summer '09 model
audio source (mp3 player) <3.5mm male input-------------3.5mm male input> line-in to macbook pro late summer 2009 model bootcamp windows xp sp2
when i select microphone in the audio panel - it works
when i select line-in and plug in the 3.5mm jack input to 3.5mm jack input to a fm radio for ex. it doesn't work
how do i make the line-in work?
i remember that when i first installed mac osx sl and windows xp bootcamp - the first couple of times around when partitioning the hd - the line-in worked a couple of times, in between times somewhere along the line i made some change to the spdif settings ?? or driver / to make the red light that comes on in the line-in jack go away - the other method was to use a toothpick to push a tiny button inside the jack, did that once -but the redlight came back again after a restart on bootcamp side.
thanks in advance,
-r

Although I don't use it, the Line-Input jack should require a signal about 40dB higher than what a microphone alone puts out. If your cable only adapts the connector and does not provide amplification, I'm not surprised you get nothing. If you are lucky, you MIGHT get a low signal by going into System Prefs/Sound/input/line-in and turning the input level slider all the way up. But the real answer to to get a mike preamp or mixer, or a mike with line-level output. Some products take a mike input and convert it to digital into the USB port.

WLC8510 AAA Accounting Record

Dear All,
I listed an AAA accounting record from my radius server with WLC8510 after I finished a session with downloaded a 100MB file.
1.) The Acct-Output-Octets > Input-Octets mean the Octets direction is from Controller to Client because I download a 100mb file, in general should be input > outpu, but in cisco WLC, it is inverted, is it correct?
2) The packet number of input and output is similar, that is different with other brands when I perform the same testing.
NAS-Identifier = "WLC8510"
        Airespace-WLAN-Id = 124
        Acct-Session-Id = "52a91c23/00:1c:bf:78:2b:21/1575117"
        NAS-Port-Type = Wireless-IEEE-802-11
        Acct-Authentic = Remote
        Tunnel-Type = 0:VLAN
        Tunnel-Medium-Type = 0:802
        Tunnel-Private-Group-ID = 30
        Event-Timestamp = 1386814675
        Acct-Status-Type = Stop
        Acct-Input-Octets = 3773718
        Acct-Input-Gigawords = 0
        Acct-Output-Octets = 98257335
        Acct-Output-Gigawords = 0
        Acct-Input-Packets = 64838
        Acct-Output-Packets = 64886
<omitted>
Thanks.
Mic

Check the following services are working:
CSAdmin
CSauth
CSDBsync
CSlog
CSmon
cSradius
CSTacacs

Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.

ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Cannot Record Audio using Logic Express 7.0.0 on 13" Macbook

Help! I have Logic Express 7.0.0 and am running it in on an Intel model Macbook 1.8Ghz, 13''. I do not have an external soundcard. Will this version of Logic Express allow me to record live audio if I do not have an external soundcard? I only want to be able to record & edit a single audio track, so thought I might be able to. I cannot seem to get the 'R' (Record) button to appear despite activating it in the >View< section, so I cannot arm any tracks, and so cannot record. Is there a bug with this version of Logic and the Intel Macs? Do I need to update? If so, what would be the best way to update?
Regards,
Lee
<br>
Intel Macbook 1.8Ghz Mac OS X (10.4.8) No External Soundcard

I updated to Logic Express 7.0.1 successfully but the problem wasn't solved. Now if I try to update to Logic Express 7.2.0 it says that it cannot find the correct version of Logic Express. Im not sure how updating works - Can Logic Express 7.0.1 be updated to Logic Express 7.2.0?

Cannot record using Audio Line In

Using my Mac Book Air, I cannot record (in Garage Band) using Line In. When I go to System Preferences, Sound, Input... LINE IN is not an option. The only input source is an internal microphone.
Does Mac Book Air have a LINE IN option? If so, how do I switch to that?

Hi,
according to the specs http://support.apple.com/kb/SP8 a MacBook Air does not have an Audio Line-In only the internal microphone.
Only chance you have is to get an USB-connected audio device like iMic from Griffin for example http://www.griffintechnology.com/products/imic
Regards
Stefan

X100e, cannot record background sound

Dear all,
My X100e cannot record background sound though it can record sound from microphone.
My Volume control is like below pictures:
http://lh6.ggpht.com/_9kUvjBH2L9A/TRgWkZSo1LI/AAAAAAAABOM/AmBx2OKOgfg/Volume_001.jpg
http://lh4.ggpht.com/_9kUvjBH2L9A/TRgWkTQaEfI/AAAAAAAABOQ/nCooZ10r_Qs/Volume_002.jpg
Rgds,
Linh

Hi, I mean stream music for example.
Here is my case:
My friend and I were in voice conference using Skype, I used Goldwave to record the call but I can only hear my voice and sound in the room only. How can I record his voice as well as record the stream music that was playing on winamp?
Rgds,
Linh

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

G/L account cannot record in the business transaction.

Dear Experts,
When i am using cash journal (FBCJ), some G/L account cannot record in the business transaction. (error msg: you cannot enter tax code in business transaction).
I want to know how to edit the business transaction to disable the tax code requirement for those G/L account
Regards,
Wilson

Hi
If you want to disable the tax code requirement for that particular GL a/c XXXXX.
1) In FS00 Please chck if there is any tax category specified(under control data tab), please ensure that no tax code is specified.(this particular chk mark will make the gl account as tax relevant)
2) if no tax code specified in fs00, you need not specify anything in the transaction code FBCJC2 (For that business transaction) in the field tax code.
3) So at the time of posting transaction in FBCJ it will not give any error.

After upgrading to IOS8.1 my microphone stopped working. cannot make a call, cannot record a voice memo, but Siri works !!!

after upgrading to IOS8.1 my microphone stopped working. cannot make a call, cannot record a voice memo, but Siri works !!! Surely this must be software since I presume there are not two microphones, one for Siri and one for everything else. Tried resetting, rebooting, switching off noise cancelling. What else is there?

Hi there hansadj,
You may find the microphone troubleshooting steps in the article below helpful.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
-Griff W.

I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions? Thanks

I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
Thanks

email ituens at expresslane.apple.com and they will help you for nothing

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours. Why?

I cannot record anything on iPod shuffle. Why? I do not recognise any of the windows shown in the various manuals about shuffle. Why? Currently an Orange light is blinking on the shuffle, and has been doing so for hours. Why?

I finally stumbled across a fix for this problem, and in case someone else is frustrated at some point by a similar issue I'm posting what finally worked to enable me to bring iTunes up at any time (without rebooting first).
The solution was to go to the preferences to uncheck "search for shared libraries".
I'm glad the problem is fixed, but Apple developers really should include a timeout function on iTunes search for a shared libraries. At least a visual dialog to confirm that the application is in the process of searching for a shared library on the network would help provide clues as to what is causing the spinning beach ball to appear right about the time the application window should pop up.

My imovie '11 capture function cannot record audio

I don't know why I cannot record the audio with video using the capture key. There is no problem when I do the recording separately!
Can anyone help answering this, please?

AppleMan,
Thx much. This has been driving me NUTS!
I have already tried the plist deletion and I evn deleted the entire application and reloaded via the APP store and still no luck.
I will try this again, I am tottally baffled that all the videos sounf fine in QT, and FCP, but NOTHING in iMovie '11 (9.0.4)
I have been using iMovie for a long time and this has never happened before????
Thx again and if you have any other suggestions, please pass them along.

3640 radius aaa cannot record g723 , only record g729

Similar Messages

Maybe you are looking for