366 days depreciation instead of 365 days

Hi,
In the year 2008 system is calculating depreciation for 366 days instead of 365 days due to feb 28 days. How to calculate 365 days depreciation? Can any one guide me on this.
govind

Hi,
sorry. as per config settings 366 days (feb we have given 29 days default) but system want to calculate 366 days only in 2009 fiscal year not in 2008 fiscal year. becuase it is 365 days only. so system need to calculate 365 days in 2008 fiscal year. how to achieve this?
govind.

Similar Messages

Dunning interest calculation - taking 360 days instead of 365 days

Dear Friends,
I have done the dunning customization and forms are generating properly including the days in arrears. But for the dunning interest calculation, it is taking only 360 days instead of 365 days. Because of this, there is a difference in interest amount in dunning (F150 tcode) and interest calculation (FINT tcode).
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

hi
check the below configuration.
spro-
interest calculations- global settings-
prepare item interest calculation/prepare balance interest calculations.
here you select calender type : G(365 days)
chandra

Office 2013: Getting 5 days trial instead of 60 days

I download 700MB Office 2013 from Microsoft's Technet Evaluation Center after learning (from the same website) that the evaluation period is 60 days. But after installing, the Office is saying that evaluation period is 5 days. I don't have product key to
enter as Technet Evaluation Center gave this error:
Your product key is:
Error: 'Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.'
I tried obtaining the key several times but every time the website gave the same error.

Hi,
Have you ever activated Office with this trial product key before?
Or you can contact your customer service center to confirm the rest trial period. I’m unable to give you a definite answer on the forum.
Global Customer Service phone numbers:
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Validate Date if it falls within 30, 120 and 365 days of the audit date I enter on any given day

PDF Forms in Acrobat 9 Pro
When auditing a file, I enter the date I am auditing it.
Example: 02/18/2015
I then enter dates of when information was last verified. Some of these dates need to fall within 30 days of the audit date I enter on any give day and others need to fall within 120 days and another within 365 days. If they don't fall within the specified number of days for that field, I would like it to give an error message in that filled.
Examples:
College Grad Date 01/15/2015
Certification Date 12/23/2015
License Date 02/13/2014 - This is over 365 days so I do not want the date, I want it to display "Need to re-verify"
I do not have any inkling of an idea of how to write this. Your help would be most appreciated.
Thank you.

Solved the problem- I contacted apple on their support line found on this page... http://www.apple.com/uk/support/mac/ and they were really helpful and talked me through what to do on the phone, I now have all three productivity apps. Hope this helps

February is 29 days and offset -365 days offset is wrong

Hello
I have many key figures calculating offset periods of -365 days on 0calday interval
Today I have a problem because february is 29 days and all values with the offsets on 01.Feb.2008 until 29.02.2008 are reading/summing up the values for 01.Feb.2007 until 01.March.2007.
Is there a way to solve this without having to change the offsets in all key figures in all queries to -366?
Thanks in advance
Heloísa
Edited by: Heloísa Alves on Mar 5, 2008 10:48 AM

Dear,
Try to create a variable with User Exit----
> in that give the logic as Prevoius year to date...consult with ur ABAPer to write the logic and use that variable in ur queries then only the problem will get resolved ...
If u find the standard variable then install it and use it ...................
Regards
venu

Need to insert 365 days in a table

I am using oracle 10g.
now i displayed the 365 days using the query below
select trunc(sysdate,'YEAR')+rownum -1 dates
from dual
connect by rownum < 366;
now i need to insert 365 days in a into a table called DAYS_IN_A_YEAR.
table structure is:
CREATE TABLE DAYS_IN_A_YEAR (
DATE_COLUMN DATE)
Regards,
Ansaf.

Hi all,
Thank you for all.
I need one more requirement in the same table.
Now i alter the table and add two more columns(shift,professor) in that table(DAYS_IN_A_YEAR) and
delete all the records already available in the table.
Now my table structure is
CREATE TABLE DAYS_IN_A_YEAR ( DATE_COLUMN DATE,
SHIFT NUMBER (2),
PROFESSOR VARCHAR2 (25));
Note: Date_column format is dd/mon/yyyy
I need to insert the records in table (DAYS_IN_A_YEAR) like the below one:
DATE_COLUMN SHIFT PROFESSOR
1/jan/2009 1 null
1/jan/2009 2 null
2/jan/2009 1 null
2/jan/2009 2 null
3/jan/2009 1 null
3/jan/2009 2 null
The above structure will continue for 365 days.
Edited by: Ansaf on Feb 19, 2009 6:38 PM

Family Share - A CRUEL 365-day lockout, REALLY?

I bought my wife a new 128 GB iPad mini 3 on December 15th at Best Buy, I had been saving for this iPad for some time, and Lori had wanted the new iPad mini 3. Both my wife and I have bought multiple iPods over the years, use them, abuse them, and they just keep on playing through the abuse. We have brought 6 iPod of various generations through the years. I was so impressed with her iPad 3, I decided to buy myself a 4th Gen iPad. So Lori and I now both have iPads.
Lori has had her iTunes account for years, and she has bought a ton of music through her account, and we shared that music, with multiple iPod devices over the years. It worked out great. In the last two years Lori has been buying more TV Shows, and currently she has bought about 10 movies, so we watch the TV shows and Movies on our Windows Computers.
But now that both of us have iPads, well we wanted to setup family sharing. I had been hearing and semi-following all of the trouble that Apple was experiencing since the roll out of Family Sharing. I gained this awareness of the problems by reading many editorials and articles by seasoned Apple device owners in various online blogs and some major editorial sources. So I was a little leery of jumping into Family Sharing, but I read the process and I thought let’s give it a go. So a few days ago, I decided to print the Family Sharing Technical How-To Articles from the Apple Support web site. I read them multiple times and attempted to accomplish the feat. Well it turned out to be a feat a feat which is now impossible to resolve for us apparently.
I thought I understood the process, but ultimately I got confused with the whole process, although the first time I set Family Share up I had actually done it correctly but for whatever reason, it still would not allow us to share.
Bottom line I left Lori's family group, and I recall thinking to myself, maybe I need to setup myself as the Organizer thinking that this might be the way to get our sharing activated. Well I would find out later this was not the correct approach and may have sunk my ship.
So I decide to ask for help, I opened a case with Apple Support on Friday February 13th, 2015. I still don’t know what the problem is at this point, all that I know is that I cannot get Family Sharing to work. So I tell the Apple Support Representative what is going on and the Rep asks me impatiently at this point as if he needs to be somewhere else. Quote: "Why do you want to enable family sharing", (I thought REALLY)...... OKAY I admit the question just baffled me. So I said slowly…...because I want my wife and I to be able to share content back and forth with each other, I have come from a Windows world, and I told him my wife and I plan on migrating to Apple computers. So we figured we would get this whole family sharing thing all setup. I tell the Apple Support Rep that Lori my wife has a great deal of existing content, purchased as in Music, TV Shows, Movies, and iBooks. She has a lot of content, and I want access to it.
What THE APPLE REP said to me next blew me away. You have left Family Share twice, and the rules state you will not be able to enable Family Share for 365 days on the device where this occurred. (End of Story) mine!
I was not going to accept this, I wanted to have them explain the rationale for this customer service nightmare He says I don't know if we can do anything for you, but I will send it the a Tier 2 representative, and see what they say, he then says, but since it is 3:30 on a Friday afternoon, everybody is starting to leave so I am not optimistic that anybody is going to call you back today, as we are all leaving. Then the young man stated the best we can do at this point is to talk with you on Monday. So I accepted this, I made certain he had my correct cell number and although frustrated, I waited till Monday.
So when Monday February 16, 2015 rolls around, and I hang by the phone all day, no contact at all. So I start searching the Apple Support Web Site, to see what now, how do I proceed, well I was given a case ID so that was good, at least everything we had done will be saved in the CASE ID: 748510224
Well not so fast, it turns out that rather than try and call me back the Support Representative just up and closed my case. An email was sent to me wanting me to give them a rating of how great the service was. (NOT)
So there was no attempt to bring resolution and try to come to some satisfactory solution.
Bottom line I am stuck with the inability to Share these beautiful brand new devices two brand new iPads that I paid at close to a grand. Apparently I cannot even set Family Sharing up with these devices, well least wise not for another year.
The events over the last several days and my experience with Apple Support have given me pause regarding Apples. It’s a huge disappointment.
I still want to move to a MacBook Pro, and my wife still wants to get her iMac with Retina Display.
My singular Question: Is this how this must end? With us waiting for a whole year to get Family Sharing operational? This because I left my Family share twice on my iPad device.

That's better than the response I received. The supervisor with whom I spoke earlier today told me flat out there's nothing they can do, and I just have to wait a year.
I do hope they're looking at a solution for those of us who were just playing around with the feature to see how it works. I understand the rationale, but considering that there was no warning that the account would be locked out, that "solution" is uncharacteristic of Apple and simply unacceptable.

Why spotlight is not able to perform searches on iCal events older than 365 days?

why spotlight is not able to perform searches on iCal events older than 365 days? I really do not understand why if iCal can sync all events, even the very old, the spotlight will not be able to search on events older than 365 days; why? is absurd; let's say I want to search for a person contained in an old appointment: iCal in your Mac with a few key words, I find it right away, but this important feature on the iPhone is locked; we have in our pockets phones are very sophisticated, but it does not manage to make things really trivial.

Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Source inspection before 365 days of delivery date of purchase order

Hi Experts,
Business wants to create source inspection lot well in advance before 365 days of delivery date of purchase order. this lot is required to record results.
In SAP, transaction code QA51 allows only two digit characters for 'number of days for opening period' so system is not creating inspection lot for more than 99 days delivery date from current date.
Please advise.

Hi Patel, I really got interested on this particular issue because we have been using source inspection in our company for a while. After some investigation on ABAP code of report I will share with you my fact findings:
1) System calculates the start date of source inspection (delivery date from PO - Leadtime from q-info record). For example, in my test case it was 14.08.2015 - 0 days. So field g_datum below will be 14.08.2015:
2) System then checks if you are running the report in background (highlighted in yellow above). If so then it will check if the start date of inspection (g_datum) falls on opening horizon (g_datum_eroff). The opening horizon is calculated as per formula below (system login date + opening period). As an example: 14.08.2014 + 30 days = 13.09.2014.
Default opening period (p_eroff) is 30 days:
3) So all-in-all, when you are running QI07 online you´ll get a yellow traffic light on the long leadtime PO but you will be able to process it (on-line). However if you run the report in background (job scheduling) system will only create inspection lot to the relevant POs if the PO's delivery date falls on the 30 days window based upon the current date.

Carrying scheduling cosidering all 365 days are working days

when I am carryying out scheduling for a process order in which resource is assigned with 365 days as working days calender, it is displaying saturday and sunday as non working days and no operations being planned on those days. Even plant is assigned with factory calender 0f 365 working days. Can you please anybody let me know what may be the problem.

Dear,
Factory calendar is maintained in SCAL transaction and assgined in the capcity tab in resource. or Whether you have maintained the shift sequence in resource?. ie for each dates have you maintained the shift pattern with all days are working days.
Please refer thess threads for details,
Re: change the Factory calendar in work center
Re: Factory calendar in work center
Regards,
R.Brahmankar

Day depreciation

Hi Experts,
I am created one asset with cap.date is 10.02.2009 and dep.start date is 10.02.2009. i posted acquistion on 10.02.2009 through f-90. but when i see the asset values its showing the depreciation for the month of feb is 28 days (full month), but my requirement is 28-10=18 days depreciation. please guide me which steps i have to do in customizing.
regards,
Gopi.P

Hi Gopi,
To get this, one customization is required. While creating "Depreciation Key" in AFAMA, select "Depreciation to the day" check box(4th item). With this system will consider days while calculating Depreciation.
If you have doubts, please come back I will give you further details.
Nanda
Edited by: Nanda Kumar Manchukonda on Feb 25, 2009 6:38 AM

180 days depreciation as per IT act

Hi,
I want to post 180 days depreciation ( Ours FSV is AP to Mar, if i acquire asset from Apr to Sep it should calculate full year depreciation and if i purchase after, it should calculate depreciation for 180 days as per IT Act, for that i've made setting in Period control, i've taken IN1 in period control, but when i create group asset and if i select the IT depreciation key, system is throwing error message, "E003 SYST: Period 000 is not valid in financial year variant", if please suggest me the possible errors behind it.
Regards,
Sudheer

Hi Sudheer,
This 180 days calculation can be done for Income tax depreciation if you provide the below details in the income tax related depreciation key
Base method: IND1
Declining Balance method: I01 to .... (whatever is available in F4 option based on rates you select)
Period control: IN1
Multi level method: M1 to M9 as provided by standard SAP
Class: 2 Declining balance depreciation
Change method: No automatic changeover
Multiple shift: 2 no effect on depreciation and useful life
Scrap value: 3 cut off value is ignored
shutdown: No
If you follow the above details in the depreciation key, then you will get that 180 days calculation. ie., from 1st april to 30th september if you capitalise any asset, your system will calculate full depreciation and from 1st october to 31st march if you capitalise any asset, you system will calculate 180 days depreciation.
Hope this helps. Assign points if useful
Regards
Dwarak

Less than 180 days Depreciation Calculation process

Hi
I would like to calculate the depreciation exactly for >=180 days and <180 days. What all settings I have to do to get the exact days for calculation.
I have made the settings but its taking April to September for more than 180 days and October to March for less than 180 days.
I have to calculate it for till 3rd October as cut off for 180 days.
Thanks and Regards,
Sarvendra Singh

Please refer the below
http://scn.sap.com/thread/3420139
http://scn.sap.com/thread/2149582
http://scn.sap.com/thread/718175

Scheduling a task 1 year (365 days) out

I am trying to schedule a task for 365 days out (1 year/52 weeks) and am encountering errors with the automatic scheduling. Work will be performed on the weekends, year-round, from 8:00 AM to 5:00 PM. I have set the "Change Working Time" options
to consider the weekends working days, as well as set up my Scheduling default Options to: "Sunday week start"; "8 hour days"; "56 hours per week"; and "30 days per month". However, when I enter 365 days under
duration, the automatic scheduling is completely off. Very frustrating... Please help!!

Hi,
I just ran a test and the task was scheduled accordingly
What I have done was to set the Saturday and Sunday as working days in Change Working time
if you are using 'days' to schedule your tasks, there is no need to change the other options (e.g. Hours per week)
If you are assigning resources to your task, make sure the resource calendar is also having Saturday and Sunday as working days
Hope this helps
Paul

How to display only Day value instead of DATE in Bex Report

Hi Experts,
We have a Month to date Report, in this report we need to display only day value instead of DATE value,
Like
if Date is 14.05.2010 we need to show only 14
Regards,
Chandra

Hi ,
Thanks for Quick Response
we does have the option to create the char(calday or ...) value variable replacement with char (calday or ...) info object, we can replace with Report r variable value only not with info object.
i hope we can replace the with info object only with formula variable with replacement.
My BEx Report is Designed like
Columns
0Calday
Rows
Plant
Keyfigures
Actual
Plan
Report output Looks like month to date
0CALDAY            01.06.2010   02.06.2010 03.06.2010
P1 ACTUAL            10                     8                    4
P1 PLAN                 15                     6                    2
P2 ACTUAL              5                   10                     7
P2 PLAN                  4                      8                    3
Report should be
0CALDAY            1    2     3
P1 ACTUAL      10     8      4
P1 PLAN           15     6     2
P2 ACTUAL        5    10    7
P2 PLAN            4      8     3
please let me know how can i achive this
Regards
Chandra

366 days depreciation instead of 365 days

Similar Messages

Maybe you are looking for