366MHz Graphite iBook (w/ FireWire)... Does it exist?

I've noticed an auction on eBay where the seller listed a 366MHz Graphite Clamshell... with a FireWire port. I, personally, have never heard of this model and, ironically, the one picture that is missing from the auction is a side-shot of the ports to verify the FireWire port's existence. I have the suspicion that the seller may have mis-listed a 366MHz first-generation iBook SE or a 466MHz second-generation SE, but they claim that they are an apple-certified technician and those are the specs, although the unit is in storage so they can't verify them.
So then, my question: Has Apple ever produced the standard second-generation (366MHz, FireWire) iBook in the graphite color?

Before buying from eBay, meet the seller. You never want to get something that expensive sight unscene.
See my FAQ*:
http://www.macmaps.com/usedrefurbished.html
To ensure you don't find yourself facing other common issues for not buying new.
- * Links to my pages may give me compensation.
Message was edited by: a brody

Similar Messages

Firewire and esata on a single expresscard - does it exist?

Firewire and esata on a single expresscard - does it exist?
I am wanting to connect two Firewire cameras and an esata external drive simultaneously. Does an expresscard exist that can help me do this??

So you are looking for an express card with 3 firewire slots? The best I've seen is 2 firewire, 1 usb.
http://www.sonnettech.com/product/fwusbexpresscard34.html
But you can do more searching via google.

Does a firewire/usb converter exist ?

iMac has no firewire port ? Need to migrate files from my LaCie-mini external which has no usb port. Does a firewire/usb converter exist ?

No it doesn't unfortunately.
Firewire reset, usb reset…
Shut down the computer.
Disconnect all FireWire devices and all other cables, except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the FireWire device(s) (one at a time if there is more than one) and test. Test with each FireWire port if you have more than one.
https://discussions.apple.com/thread/3101579?start=0&tstart=0
http://hints.macworld.com/article.php?story=20051129074631518

Thunderbolt to Firewire adapter - does it exist yet?

Has anyone actually made a Thunderbolt to Firewire adapter that you can purchase yet? I know it's early days, not complaining, just hoping hoping......

FireWire does provide power to connected devices, up to a specified limit (though I don't know what the limit is myself). This is why properly designed portable FireWire hard drives are able to be used without external AC power.
FireWire will never be able to move data at Thunderbolt speed.
Up to now, every Mac that has a Thunderbolt port also has a FireWire 800 port, with the exception of the two current MacBook Air models. For people who buy those MBAs and already have FireWire devices, a FireWire-to-TB adapter would be useful. For those with other TB-equipped Macs, not so much.

Graphite SE 466 firewire display assembly

Hello, I was wondering if anybody knew if the display lid, from a non firewire graphite 300, would work for a graphite firewire se 466?
Graphite G3 (firewire) Mac OS X (10.3.9) I have a crack on my screen from it falling down.
Graphite G3 se (firewire) Mac OS 9.2.x

IMHO you may combine the plastic casing parts as you like, you can build up a multicolored Clamshell.
The only thing that differs: There are two different types of bottom cases for the Firewire and non-Firewire logicboards (an extra hole for the firewire port - the logicboards have the same layout)
Please note that the color of graphite ibook 366MHZ special Edition (non-firewire, Feb 2000)is not identical to the 366MHZ and 466MHZ Second Edition (Firewire, Sept 2000)
The look of the first one is translucent/grey, the second edition is white/grey (They called it "redefined graphite")

How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR

"The selected communication device does not exist"

Whenever I log on (or come out of sleeping), I get a prompt box from Internet Connnect that says "The selected communication device does not exist. Please verify your setting and try again". I think this started to happen when I stopped using a USB modem to access the internet. Recently I was again using a (different) USB modem, and when I stopped (I now have a wireless router), I now get TWO of the above alerts!
To be clear - I have no problem accessing and using the internet with the wirelss router I am using.
Is there a way of deleting historical communication devices I no longer use from Internet Connect that might stop this from happening?
Thanks in advance.
G4 iBook Mac OS X (10.4.8)

Hello Dunstan,
I wonder if this might have something to do with Location and Network settings.
I'd go to System Preferences/Network and, choosing the location that you are using, select the "modem" tab. On the presumption that, because you are now using wireless router and that your computer is no longer using its built-in modem, I'd delete all settings under "modem".
Then I'd open Internet Connect and see what crops up when you click on the Modem tab. It should be blank. If it is not, I'd close Intertet Connect, then go to My User Folder/Library/Preferences, and there move the following file to the Desktop: com.apple.internetconnect.plist. Open Internet Connect again.
There are other things that can be done, especially in the Locations settings. However, I'd try the above first.
Best of luck,
Martin
If you found that this contribution helped to answer your question, please consider the "Helpful" and "Solved" buttons in this message. Why reward points?
Powerbook 15-inch G4 1GHz Mac OS X (10.4.8) Several veterans that go on and on. 40gig, 3rd generation iPod

The name "Folder" does not exist in the namespace

I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks Hal

Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

Boot image does not exist and cannot read disk label errors.

Hi - I'm having a problem with installing Solaris 9 4/04 on a Netra T1. The Netra already has Solaris 7. I need to get this set up as a jumpstart server but it can't find the boot image. I'm using a brand new bonafide installation disk - not a copy. The system won't let me install/upgrade to Solaris 9 either. I get an error stating that disk label can't be read. I've tried swapping out the CDROM but I still get the same errors. Does anyone know what or why this may be happening? (Oh - and another strange thing - like I said the CDs are the original but there doesn't appear to be a cdrom/cdrom0/s0 directory. The directory I see is cdrom/cdrom0/sol_9_404_sparc/Solaris_9/Tools)
ERROR: Install boot image /cdrom/sol_9_404_sparc/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
and
Excuting last command: boot cdrom [- nowin]
Boot device: /pci@1f,0/pc1@1/ide/cdrom@2:f file and args: [- nowin]
Can't read disk label.
Can't open disk label package
Evaulating: boot cdrom [- nowin]@1/ide@e/cdrom@2:f File and args: [- nowin]
Can't open boot device
I appreciate any help at all - is there anyone out there who can tell me what I may be doing wrong?
Thanks

Hi check that you are booting of the right cd. Make sure it is soalris 9 software 1/2 if that fails then it may well be that your cd is buggered. most likely it is buggered it it cant find the boot image.

Bursting Problem - A file or directory in the path name does not exist

I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}

Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike

File does not exist: /oa_servlets/AppsLogin-Urgent plz

Hi;
I have r11.5.9 on AIX 5.2 i create one new AIX 5.3 server give same IP and copy all folder from 5.2 to 5.3 wiht exact path.
With same user i can open db+lsnr+apache on new 5.3 server But when i try to login EBS i can see login page also Ebuniess enter link but when i click it it thoruh 404 page can not found
In apache log file i have File does not exist: /oa_servlets/AppsLogin, i can not find pages under $COMMONTOP on 5.2 and my new 5.3 server. But on 5.2 i canlogin system wihtout any issue
All services start wihtout problem also db, i run autoconfig on appstier but when i try to run on dbtier it thotugh error:( I am not sure i need to run autoconfig on dbtier for upper erro)
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /xxx/xxdb/9.2.0
/xxx/xxdb/9.2.0/jdk/bin/jre and /xxx/xxdb/9.2.0/jdk/9.2.0/jdk/bin/java not found Pass option 'java' on command line
and yes there is no such a file like that. How i can solve those problem
thanks

Hussein i cant run autoconfig also preclone on dbtier but apps tier i could run autoconfig and its end wihtout error
http://xx:8001/OA_HTML/jsp/fnd/aoljtest.jsp http://xxx:8001/pls/TEST2/FND_WEB.PING - too
http://xx:8001/aplogon.html
I cant open those too
Fri Sep 17 19:49:00 2010] [error] [ File does not exist: /oa_servlets/AppsLogin
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Fri Sep 17 20:14:39 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:39 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:51 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:51 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:55 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:55 2010] [error] [] File does not exist:
[Fri Sep 17 20:15:06 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:06 2010] [error] [ File does not exist: /servlets/Hello -
[Fri Sep 17 20:15:11 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:11 2010] [error] [ File does not exist: /servlets/Hello
[Fri Sep 17 20:15:14 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:14 2010] [error] [] File does not exist: /servlets/
[Fri Sep 17 20:15:50 2010] [error] [] File does not exist: /xxxx/portal/oracle/_servlets/Hello
[Fri Sep 17 20:15:59 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:59 2010] [error File does not exist: /oa_servlets/Hello
[Fri Sep 17 20:16:15 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:16:15 2010] [error] [] File does not exist:
[Fri Sep 17 20:18:04 2010] [error] script not found or unable to stat: /xx\xxora/8.0.6/tools/web60/cgi/ifcgi60

File does not exist on remote site, yet it does

I have been trying to understand how Dreamweaver handles remote files in CS5.
My server is setup as a remote server and a test server.
I open the remote file, it offers to get dependencies, so I click yes.
I click on Live view, then it tries to show me the following url
http://my_site.com/public_html/path/to/my/file/file.php
It should not put public_html in the path, and I did not specify this in my site setup. My root setting is /.
Anyway, If I change the url manually, then it shows correctly. Then it offers to discover dunamically linked files, which I agree to.
Now it tells me that 'Dynamically-related files could not be resolved because the site definition is not correct for this server'
If I try to open one of the files that it has discovered, I am told that it is not on the disk, so would I like to 'get it', so I agree.
Finally, I am told that 'Get operation failed since linked-file.php does not exist on remote site'
I suspect that this is all to do with my site definition, but I fiddled with the settings and can't resolve this. I think that the whole problem goes back to Dreamweaver's insistance on putting public_html in the path, but I can't stop it doing so.
Any suggestions?
Thanks
ian

Hi,
Well, yes I did manage to fix the dynamically linked resources issue. As mentioned above, I did need to mention public_html in my Root Directory setting in server setup (silly of me).
I had tried this at first, but it didn't work, as I had the server set as a test server and not a remote server, anyway, i now have it set as both and all is well.
Except that, the first issue that mentioned is still with me: namely, dreamweaver mentions the public_html in the url path when on live view, which is not correct and I don't know where it is inferring this from. I can change it manually, but this doesn't seem right to me. Am I still missing a setting?
In anwer to the questions:
1) My setting (now) in the Root Directory setting in DW is: /public_html/
2) My actual path on the server (that i mention in php scripts) is: /home/login_name/public_html//path/to/my/file/file.php
[In the advanced settings of DW site setup on the Local Info page I have set Links relative to Document option, although it does not seem to make a difference when I change it to Site Root.]
Any suggestions appreciated.
Thanks
Ian

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

Error: While Opening a Custom view- Action &OBJECT_ID& does not exist

Hi Experts,
On the click of button, I am creating a window and opening as follows:
wd_comp_controller->go_window         = lo_window_manager->create_window(
                      window_name            = 'ZW_CERTIFICATION_POP'
                      title                  = lv_pop_title
                      close_in_any_case      = abap_false
                      message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                      close_button           = abap_true
                      button_kind            = if_wd_window=>co_buttons_okcancel
                      message_type           = if_wd_window=>co_msg_type_none
I have written following code in INIT method of View to Subscribe events but it is dumping with the Error "Action &OBJECT_ID& does not exist ".
DATA lv_ok     type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view   TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
register button events
    lo_view = wd_this->wd_get_api( ).
    lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
    wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
    lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
    wd_comp_controller->go_window->subscribe_to_button_event(
                   button            = if_wd_window=>co_button_ok
                   button_text       = lv_ok
                   action_name       = 'OK'
                   action_view       = lo_view
                   is_default_button = abap_true
    lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
               wd_comp_controller->go_window->subscribe_to_button_event(
                  button            = if_wd_window=>co_button_cancel
                  button_text       = lv_cancel
                  action_name       = 'CANCEL'
                  action_view       = lo_view
                  is_default_button = abap_true
How to solve this exception causing application to dump.
Thanks
Depesh

Hi Depeshn,
I have written following code in INIT method of View
I think you have writen code containg subscribe_to_button_event method in the INIT method of the pop up view. But actually you should write that code where you are generating the pop up window. i.e in the ONACTION method of the button (which when clicked generates the pop up window.)
It should be something like this:
" This whole code should come in the event handler of the button.
wd_comp_controller->go_window = lo_window_manager->create_window(
window_name = 'ZW_CERTIFICATION_POP'
title = lv_pop_title
close_in_any_case = abap_false
message_display_mode = if_wd_window=>co_msg_display_mode_selected
close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
DATA lv_ok type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
* register button events
lo_view = wd_this->wd_get_api( ).
lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = lv_ok
action_name = 'OK'
action_view = lo_view
is_default_button = abap_true
lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_cancel
button_text = lv_cancel
action_name = 'CANCEL'
action_view = lo_view
is_default_button = abap_true
I hope it helps.
Regards
Arjun

366MHz Graphite iBook (w/ FireWire)... Does it exist?

Similar Messages

Maybe you are looking for