3710 fold create groups

Hi,
I'm unable to create groups on my nokia 3710 device. right now there is one group, but if want to add a new one, I got a message, that only 25 groups are possible.
What can I do?
Cheers
Chris

Hope the suggestion of Farby works. So you'll have a back up of all your contacts which is very important, than apps try to sych it this time with outlook/outlook express, Lotus notes if you have Windows XP, or Windows mail if you have Vista/Win 7. Whatever model of phone you get its easy to put back all your contact.
Its really pain in the ??? even if you have a hard copy of your contacts to type it in one by one say 500 of them !
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

Create groups in reporting services for security?

Is it possible to create groups within reporting services and assign folder/report access to those groups?
sqlserver 2008r2
winserver 2008r2

Hi,
You can create active directory groups and assign these groups in SSRS security for folder/report access
Jiri Neoral

Where can i find the created group in portalcontent of content admin?

Hi all,
I have created a group with name Group1. I assigned some users to the group one by one. Is there any method to add 5 users at a time?
How can i store the created groups in the folder & where can i find the Group1in the portalcontent?
thanks & regards,
vila

You can assign multiple users to a group by using the User Data Import option. Navigate to User Adminstration --> Import.
Create a file with the following entries and upload it for group assignments
[Group]
gid=YourGroupName
gdesc=...
user=User1;User2;User3...
To know the users assigned to a group,
1. Navigate to User Administration --> Identity Management.
2. Put your group name and search.
Regards,
Prasanna Krishnamurthy

Need powershell commands to get email addresses from public folder created in EAC to CSV

Need powershell commands to get email addresses from public folder created in EAC to CSV
1. Created Public folders via EAC - not mail enabled - just to hold contacts.
2. Assigned owners and showed to add new contacts - then add to favorites and finally to display as address book.
Now I need a powershell command to get those email contacts in those public folders.
I need to view them because when we send emails to those groups (via select all) in the public folders, it is creating an NDR for 3 users saying - "..blah blah -OFFICE FAX or HOME FAX) - yet they are getting the emails.
I suspect that their contact details are corrupt somehow and want to see what contacts are actually listed in the public folders. I already checked to see if the source of the contacts was the public folder or "my contacts" and they are not.'
I have tried multiple get recipient commands and get public folder commands with no results in the CSV

The only way to get that data is either via the Outlook com object or using EWS. None of the commands in the Exchange shell look inside of a folder, the most you can get with those is email addresses for mail-enabled Public folders. Here is a link that can
get you started with how to connect to public folders via EWS, then its just enumerating the folders and looping through the items in the folders for the details of the items.
http://gsexdev.blogspot.com/2013/08/public-folder-ews-how-to-rollup-part-1.html
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

HT3529 My group messaging on/off label isn't showing up at all. I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings Messages and I can't find any on/off sw

I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings>Messages and I can't find any on/off switch.

Hello there, Idaniabb.
The following Knowledge Base article offers up some great information in regards to group messaging and also links to another excellent resource for troubleshooting messages as well:
iOS: Understanding group messaging
http://support.apple.com/kb/HT5760
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Error while creating group chart of accounts

hi
i am learning sapfico now.while i was practicising to create group chart of accounts ,i got an error"group chart of accounts not created to a/c no 111111.".first i created chart of accounts code for group chart of accounts.then i have created chart of accounts per company code.like wise i have created 2 account groups and 2 retained earning a/cs(1 for per company code & 1 per group chart of account purpose)
while i was creating GL master records in FS00 i got the error like that.any any body please help me.

Hi,
Have you entered "111111" in the filed group account number? If so, this account should be available / created in your group chart of account.
Hope it helps
Saravanan.A

Error while creating Group

Hi All,
We have a typical scenario.
In our application we have a form 'Cust_fmb' which will give count of records for customer. We are populating the customers group using following query.
rg := create_group_from_query('custgrp','
          select cust_id rlabel,cust_id rvalue
          from custschema.customer_tab
When user login into our application and open that Cust_fmb form , form is populating the customer group but when user login into our application and opens and access multiple forms and then opens Cust_fmb forms
we are getting the error 'FRM-41072: Cannot create Group custgrp'.
We are not able to find out the cause why we are getting this error.
Please helps us,
Thanks in advance,
maddy

Thanks for the response
My code as below
PROCEDURE POPULATE_CUST_GROUP IS
rg recordgroup;
nn number;
rquery varchar2(600);
BEGIN
     rg := find_group('custgrp');
     if not id_null(rg) then
          delete_group(rg);
     end if;
rg := create_group_from_query('custgrp','
          select cust_id rlabel,cust_id rvalue
          from custschema.customer_tab
nn := populate_group(rg);
if nn <> 0 then
     message('Populate group had error ');
end if;
populate_list('MAIN.GROUP_ID',rg);
END;
Can any one tell me why do I get this error. Please..
Thanks,
maddy

Error while creating Group Asset

Dear All
While Creating Group Asset I am getting the Following error:
No depreciation area in company code 1000 allows group assets.
Message no. AY160
Diagnosis
You cannot create group assets in company code 1000. There are no depreciation areas that can manage group assets in this company code.
Procedure
Make sure that you really want to create a group asset in company code 1000.
If so, then allow group assets in the desired depreciation areas.
Please advice.
Thanks & Regards
Kanwaljit

Hi,
Check the config in OAYM and OAAX.
Then your issue will get solved.
Thanks,
Srinu

ABAP Dump while creating Group Asset

Hi all
I am getting the following dump while creating Group Asset through AS21-
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
Date and Time          19.11.2007 21:16:06
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
The current ABAP program "SAPLGLO_FIAA_SCREENS" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in procedure "SET_MANAGER_FOR_UPDATE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "GO_ASSET_MAINDATA").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Source Code Extract
Line SourceCde
545 *      -->P_LS_WORK text
546 *      <--P_LO_ASSET_MANAGER text
547 *      <--P_LO_TIMEDPNDNT_MANGER text
548 *----
549 FORM set_manager_for_update
550        USING
551          is_work TYPE raist03
552        CHANGING
553          co_asset_manager    LIKE go_asset_manager
554          co_timedpndt_manger LIKE go_timedpndt_manager
555          ct_err_msg          TYPE tt_err_msg.
556
557   DATA:
558     ls_asset_maindata TYPE gty_s_asset_maindata,
559     ls_anla_key       TYPE anla_key,
560     ls_err_msg        LIKE LINE OF ct_err_msg.
561
562 * check operation
563   IF is_work-kz      EQ con_ins AND
564      is_work-flg_unr NE on.
565
566     MOVE-CORRESPONDING is_work TO ls_anla_key.
567     ls_anla_key-mandt = sy-mandt.
568     ls_anla_key-anln1 = is_work-anln1_new.
569 * start of Note # 954513
570     IF ls_anla_key-anln1 IS INITIAL.
571       ls_anla_key-anln1 = is_work-anln1.
572     ENDIF.
573 * end of Note # 954513
>>>>>     ls_asset_maindata = go_asset_maindata->get( ).
576
577 * clone time-independent asset data manager
578     TRY.
579         co_asset_manager = lcl_amd_mngr_clone_factory=>clone_asset_manager( ls_anla_key ).
580
581       CATCH cx_faa_asset.
Any1 has a clue where I might be going wrong?
Cheers
Hrishi

Hello Hrishi
I have researched your issue and note 1063792 should resolve it. The
SAP_APPL that it is included in is SAPKH60011. I recommend you to upgrade to the latest support package available to avoid eventual errors.
For program errors you should open a support ticket in the SAP Service Market place.
Regards
Javier

I can no longer create groups that contain subgroups??

Folks,
I used to be able to create a group, drag existing subgroups and individuals into that group, and send emails to all by simply typing the group name into Mail.
I can no longer do this.
Now, to be precise. I can create what looks like a group and by dragging existing subgroups into it -- but it no longer functions as a group. When I type the name or drag it (from Contacts) into the "To:" line of Mail, the only thing that shows up are the top-level individuals (i.e., those who I put dragged in as individuals, not those who are only in one of the subgroups that I dragged in).
If I create a group that only has subgroups (i.e., no individuals at the top level, only individuals who are members of one or more of the included subgroups) then after I type the group name in the "To:" line of mail, the group name dissappears, and nothing appears in Mail's "To:" line.
The actual behavior is a little more subtle than this but the bottom line is that I can no longer create groups with subgroups.
Help!!

Hi,
If you list the steps you have taken to fix this it will help.
Have you tried using the File > New Event menu item?
Have you logged the user account out/ restarted the computer?
Have you tried un-syncing any accounts synced to Calendar?
Is there some change made to the computer that may have triggered this?
Best wishes
John M

How to create groups in AD using AD group process definition

Hello,
I want to create group in AD when i create group in OIM & i had achieved this using JNDI & was able to create groups in AD
successfully,now i want to create groups in AD using AD Group process definition which contains create AD Group task.
Can anyone suggest what flow should be followed to achieve this ?
Thanks & Regards,
Rahul Shah

I think you can do R & D to acheive this via Event Handler.
1. Apply Event Handler on Group Object Form.
In Event handler class.
2. get the parameter from ADITresource.
3. Make JNDI call.
4. Create the same group name in AD.
There may be easy approach.
Which version of OIM you are using?
Thanks,
Kuldeep

Creating group dynamically in active directory depending on their role

Hi,
I have sycn oid and active directory using directory integration platform. Now the scenario is We have one system says hr system which take care of entering all the user information. Once it submit that information it goes to oid. Now we want that when we import all that user from oid to active directory it didn't duplicate any user as well as depending on their role it should create groups dynamically in active directory. For e.g: If user belong to Trainee category or manager category it must create Trainee group & Manager group & respective person should go into that group. I don't know whether my question is placed in right group or not. I am using filter to do this task but not able to write proper condition in "source matching filter" and "destination matching rule". Any help will be appreciated.
Thanks,
Sonya Sharma

Thanks Tamim. To clear your thought, i will explain again. I have sync oid and active directory through Directory integration platform. I have created user in oid.(cn=users,dc=mycompany,dc=com). It get sync in active directory properly. Now i have created two group in active directory say for e.g Trainees and Manager. There is a field name position in oid which is a custom attribute. When i fill the information of user in oid, I have to fill "Position" attribute also. So my question is that, if i fill Trainee as a value in Position attribute and click on submit it should go in Trainee Group In active directory and not in user group. Same for manager. How can we achieve this? Can we do it through filter? Or any other way? It's needed desperately. Please help me in resolving this issue.
Regards,
Sunil

Is it possible to create group above report between to different data model

Hi,
I am having one problem.. I am working on Bi publisher 10...
I have to create 2 different data models.. which i have done successfully.... its showing xml data perfectly.. but my problem is i want my 2nd data model to be dependent of 1st model...
when i am designing my template ... i am not able to create a group by report..
i want my report like this ...
------------------------------------------------------------ (fetching data from first data model)
abc xyz pqrs
--------------------------------now their it must show the data from second data model... dependent on first model...
simply i want to know is it possible to create group above report between to different data models..

Thanks for your response..
I already tried this.. But its not working ..
i want parent information from data model 1
then all detail information related to parent template ...from data model 2..
but its not working.. its giving me all parent informations first then all details informations..

Problem in creating group above AND group left in one report!

Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.

hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw

3710 fold create groups

Similar Messages

Maybe you are looking for