3750 - show platform - stats for stack member and ring ?

From the sh platform port-asic stats drop command, we are able to see the drop stats for the master switch.
Question 1: how can we see the same stats for the stack member ^
Question 2: Is that possible also to consult the drop stats for the 2 x ring. If yes - what the command ?
Thanks

You manage the switch stack and the stack member interfaces through the stack master. You cannot manage stack members on an individual switch basis. You can connect to the stack master through the console port of one or more stack members. Be careful with using multiple CLI sessions to the stack master. Commands you enter in one session are not displayed in the other sessions. Therefore, it is possible to lose track of the session from which you entered commands.
This URLs should help you:
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a0080395b55.html
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a008017f8b8.html

Similar Messages

  • My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

    My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

    Right click the heading at the top of the message list and select From from the list of options.

  • Why do my raw images (fr Nikon d800e) show up bright for 1 second and then darken in Aperture?

    I'm new to this site so I apologize for the long question.  When I import raw files from my Nikon D800e into Aperture (3.2.3), they show up bright for one second and then darken slightly.  Is this normal?  It didn't happen with raw files from my Nikon D300.  I have to adjust the brightness and exposure to make them bright again.  thanks, Mike

    One of the changes in Aperture 3 as it has evolved, is to first use the Preview generated by the camera.  It waits to generate its own Preview until you actually click to display that one image.  Until then the thumbnails are based upon the camera provided JPEG Preview.
    In earlier versions, you never saw that, but only the initial Preview generated in Aperture.  It is not because of the different camera.
    Btw, if you are using 10.8.2, why have you not updated to Aperture 3.4.3?
    Ernie

  • Hey, i just got the iPhone 5s and when i unlock my phone  the clock on the lock screen shows up faded for a second and goes away is this supposed to happen

    Hey, i just got the iPhone 5s and when i unlock my phone  the clock on the lock screen shows up faded for a second and goes away is this supposed to happen

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset   >  http://support.apple.com/kb/ht1430
    Restoring  >  http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first..

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • I need Apple's Mission Statement for a paper and I cannot find it anywhere...

    I need to find Apple's mission statement for a paper for school and I cannot find it anywhere.  This is too bad because I am doing research on the top companies and their mission and value statements and I figured that Apple's would be the top pick...   Does anyone know where I could find their mission statement?
    Any help would be GREATLY appreciated!

    Justine
    It seems apple has never officially issue a formal Mission Statement, but...
    Two posts at this link are pretty good in lieu of one:
    Re: What is Apple's mission and vision statement? Where can I find it?
    CCC

  • Regarding to Outlook facing the problem. error show check online for a solution and close the problem

    Dear Team,
    Please solve this problem.
    Open the outlook then show below error.
    1. Check online for a solution and close the problem
    2. Close the program
    Please do the needful as well as possible.
    Thanks & Regards.
    Devesh Yadav
    9999815203

    Hello,
    So Outlook has failed to launch and an error dialog (error reporting) pops up. A lot of things can cause this issues.
    One of the main causes is a corrupt Navigation Pane settings file. You might need to start Outlook using the /resetnavpane
    switch. Just run command (Windows key + R), type or paste:
    outlook.exe /resetnavpane  (Please note that you will lose any customizations on the navigation pane)
    In certain cases, a corrupted data file will also cause this problem. So, if the /resetnavpane switch doesn't really work, please try to repair your data file with
    scanpst.exe tool:
    http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
    If these cannot fix your issue, please be more specific on the error. Please click the button at the bottom of the error pop ups and copy the
    Problem signature here.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Why On SIM Manager it's showing same number for SIM 1 and SIM 2?

    I recently bought Intex Cloud FX and inserted two SIM Cards from different operator. But the phone showing same number (of SIM 2) for both SIMS (SIM 1 & SIM 2). I have already reset the device but that didn't help. I would like to know how to solve this?

    Hi,
    Thank you for contacting Mozilla.
    I understand that you are having problems with you Intel Cloud FX device. In order to better understand and investigate on the issue that you are encountering, please reply to this message with the following information:
    * What is the OS version found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
    * Please provide the exact steps to reproduce the issue you are encountering.
    * Who is your current cell phone carrier?
    * How often do you encounter this issue?
    Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this.
    (You must post back onto the support forum the information, you cannot respond to the email notification that you've received.)
    Thank you for your help and we look forward to hearing from you!

  • Submit Statement for calling smartform and using its data in another report

    Hello Everybody
    There is one report which display smartform as an output.  My requirement is to call that report and return back without showing its output and use its data for futher use in the report. i Hope i m clear with my query. Plzz reply its urgent.
    Currectly i m using this statement :
    SUBMIT  ZPOPRINT  WITH PO_NUM EQ IT_EKKO1-EBELN exporting list to memory and return.
    while executing the program, after this statement i m getting an output.  but i need to store it in memory, not to display the output.
    Waiting for ur reply..
    Thanks and Regards
    Virendra

    Hi.
    I have not done this kind of requirement. What i said was just an option which came to my mind. Also not sure whether it will work for you. While submitting ,instead of exporting list to memory do submit to SAP-SPOOL. Then later read the spool content to internal table.
    I am referring you two links for this.
    [Submit to SAP-SPOOL|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_LIST_OPTIONS.htm]
    [Spool to Internal table|spool file data to internal table].
    Also search for related topic in SCN.
    Regards
    Kesav

  • New Platform Support for ColdFusion 10 and ColdFusion Builder 2.0.1: Windows 8 and Windows 2012 Serv

    Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
    The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
    Refer this technote for more details about the support.

    @Adam @CarlV
    >what's the version number when you dump the server scope?
    ColdFusion Server - Evaluation 10,0,8,284032
    OK I see, the I button reports differently to Settings Summary.
    About ColdFusion »
    System Information 
    Server Details 
    Server Product  ColdFusion 
    Version  10,0,8,284032 
    Tomcat Version  7.0.23.0 
    Edition  Enterprise (Trial)   
    Serial Number    
    Operating System  Windows Server 2012   
    OS Version  6.2   
    Update Level  /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar   
    Server Settings > Settings Summary
    System Information 
    Server Details 
    Server Product  ColdFusion 
    Version  ColdFusion 10,284032 
    Edition  Enterprise (Trial)   
    Operating System  Windows Server 2012   
    OS Version  6.2   
    Update Level  /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar   
    Adobe Driver Version  4.1 (Build 0001)   
    Regards Carl M.

  • Two renewal orders and charges showing every month for one account and same renewal package, WHY

    Why am I charged twice with two different orders every month for one package of 800 mins. Are they giving me 1600 minutes! I need only 800 minutes please, so please refund these extra order charges please. I just noticed this thing month today and on checking order history find that same practice has been followed for all my previous months transcations!

    Hello and welcome to the Skype Community.
    The duplicate charge has been reversed and the funds will be returned to you.

  • Iphone 3gs shows white screen for a second and reboots.

    While I play games, watch videos or do anything, the iphone displays a totally white screen for less than a second and then it reboots. After this it starts normally and then this all happens again after about 10-20 mins.
    Plz give me any suggestions to fix it. What is the problem? any hardware prob??

    Hello, noyz23il.
    I would agree that this is a unique issue.  I have attached an article that goes over basic troubleshooting that may help.  In this article, see the sections referring to display, camera and blank white screen.  If this does not resolve the issue, please see the last section regarding "issue not resolved".
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H.

  • TS1702 I went to the states for Black Friday and played my games on this now I can not update them. Why?

    When I came home to Canada from a holiday in the states, after having played my games there. Now I can not download new ones or update the old ones, because it says I have to first switch back to Canada. And I do not know how to do this. can anyone help.

    Go to the App Store. Tap on the featured tab. Swipe to the bottom of the screen and tap on your ID. Tap View Apple ID. Enter your password. Go to Country/Region to change to the Canada store.

  • I am so frustrated and can't get Apple to help. I have charges on my bank statement for Apple ITunes and they occur every day or so. I've removed my credit card number but they continue. How can I stop these?  My bank says I have to contact apple.

    Please help. How can I get Apple to stop charging my bank for purchases. They are showing up every other day. I removed my credit card number from my account. That has not helped.

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: mailto:[email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    https://reportaproblem.apple.com/
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • Windows Login Screen doesn't show "eye" symbol for Password Reveal and right arrow (Enter)

    When logging in to Windows 8.1 the eye symbol and right arrow symbol have been displayed until (I guess so) after an automatic Windows Update . As I was planning to migrate to Windows 10 I didn't invest much investigation into this problem. Now, after successful migration to Windows 10 Home the problem still exists. After typing the password I can't verify it because the eye symbol is still missing and for entering I have to press "Enter" due to the missing clickable right arrow. All this happens with a Microsoft online Account. I established a local account and with this, the eye symbol but not the right arrow reappeared. Many thanks for helping.

    Hi there 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you wish to enable the reveal password icon for your system. I am happy to help. It really depends on which version of the Operating system you are running, because this sort of thing is normally controlled using the Group Policy Editor. That tool is not a part of a Home edition, you would need the Pro version or higher to have that. Assuming that you do have a pro edition or higher, then these may be of help to you:5 Ways to Access Local Group Policy Editor on Windows 10 - isunshare.comDisable or Enable the new Password Reveal Button feature in Windows 8 - windowsclub.com Unfortunately the version of Windows 10 I have installed beside me is the home edition as well, so I cannot access this, to verify, so let me know if that works for you.

Maybe you are looking for