3850 controller ACL working with ISE

Hi all
I was wondering if anyone can point me to the right direction. I was setting up BYOD access with ISE and Legacy controllers as follows:
- create rule on ISE with Redirect / Airspace ACL
- once that rule is hit ISE would send ACL name that needs to be applied on the controller (i.e. NSP-IOS )
- controller would need to have the same ACL created locally with matching name
- there are certain rules on old controllers allowing inbound / outbound traffic + denying traffic to be redirected
now I want to use the same principle with 3850 controller.
question is -> where do I configure this ACL, globally or under WLAN.... Also, what about direction - inbound / outbound that used to be the case with legacy controllers?

The ACl should be under the WLAN

Similar Messages

  • My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

    My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

    Hi Ron.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Client Exclusion Policies on WLC not working with ISE as RADIUS Server

    Hi,
    for our Guest WLAN (Security Setting for this SSID:Layer2: MAC filtering, Layer3:none) we use ISE as RADIUS Server. On WLC I enabled client exclusion polices and checked all options (Excessive 802.11 Auth. Failures etc..).. But even if a client fails 20times at authentication, it is not excluded on the wlc. It works with other SSIDs, where security settings are set to 802.1x.
    Am I missing any settings here or do you have some tipps on how to troubleshoot this?
    Thanks very much!

    Hi Renata,
    If those guest failures are not associated with valid guest users (i.e. people who have forgotten their account or entering the wrong password) there isn't anything that can be done. The main point of Guest WLAN is to make it as easy as possible for Guests - individuals with device configurations you don't want to deal with or know about, to connect your network for internet access. From a WiFi/802.11 perspective, the standard Guest WLAN setup means its easy for any device to connect.
    If your Guest WLAN has the following:
    SSID is broadcast enabled, Security = OPEN, Encryption = none, then any 802.11 device can find the WLAN via passive scanning and connect. And any device that connects will get the ISE portal. Once recieveing that portal they can guess away at valid username/password.
    I would suspect that unless your Guest WiFi is adjacent to a Mall, school, hotel or other hi-density area of individuals  with time and electronics on their hands, other than alerts in your ops window and logs, resources associated with this (WLC & ISE) are very low.
    You can try and dull the noise a few ways.
    Option 1. create and ISE log filter on those alerts so they don't cluter the console.
    Option 2. Stop broadcasting the SSID.  This is not a security measure, but will cut volume of people connecting to the SSID significantly. You will have to tell your guests what SSID or include it in their credential communication.
    Option 3. Put a very simple PSK on the SSID. The PSK will become a public secret - shared with valid guests, doesn't have change as it's purpose is not security.  You will have to include this information on their credential communication.
    Option 4 - both 2 and 3
    The most effective option would be 3.
    Good Luck!

  • MC-4 Controller Not Working with LabView

    I have a Klinger MC-4 Motor Controller and am trying to control it with LabView. I have thus far not been able to get the motor to move with the driver that I downloaded from this website. If anybody has written anything for this same purpose, I would greatly appreciate your insight. Any help with this problem in either LabView 5.1 or 6.0 would be great. Thanks.

    Hello-
    It may be possible to modify the existing driver to work with this instrument. Otherwise, drivers are developed and modified based on demand and popularity so the more requests, the greater the possibility that one will be modified. Please send an email to [email protected] about this issue. It would also be beneficial to notify the instrument manufacturer.
    Randy Solomonson
    Application Engineer
    National Instruments

  • 2811 routers working with ISE?

    Hello,
    Has anybody had any success with using a Cisco 2811 router with an Identity Service Engine application config?
    I understand the 2800 series routers are not compatible with ISE but I have quite a number of them to work with and am hoping somebody has found a workaround for this.
    Ideas?
    Thanks,

    Ah, so you are trying to run dot1x on a switch module on your ISR G1. Unfortunately, that hardware would not be supported. For a list of compatible hardware check out the ISE Compatibility Guide:
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/compatibility/ise_sdt.html
    Thank you for rating helpful posts!

  • Does Korg's Microkontrol controller keyboard work with Garageband?

    Hi there,
    I am deciding whether to buy Korg's controller keyboard, the MicroKontrol. I wanted to know whether it will work when using Garageband. If it can, are there any disadvantages with using the keyboard with Garageband.
    Any replies would be great.
    Thanks
    Drummerboy100

    isteveus wrote:
    I have one it works just fine. But if you're looking for a serious keyboard this is't for you.
    Do the knobs and sliders work with GB and how does the 4 way joy stick work?

  • Has anyone managed to get a PS3 Controller to work with OSX Lion?

    Hi,
    I wanted to connect my PS3 controller to my iMac (late 2011) using bluetooth but have been unable to do so. It will connect for a brief time but then it will lose connect as it has not paired. It also asks me for a pairing code. I have tried 0000 and this does not work. I have searched the internet and it seems this is a common issue. Has anyone managed to get it working?
    Does anyone know if Apple plan to fix the issue with a forthcomming update?
    Cheers,
    Tim

    There are numerous threads on this, please use the "More Like this" tool, you will find it on the right. I'm not sure if anyone has any solutions but that is the logical place to start.

  • Midi controller doesnt work with ES2

    Hi
    Im using my virus TI synth as a midi controller for my soft synths.
    It works just fine with my NI instruments, the midi learn functions just fine with those,
    but when i try midi learn with the ES2 i cant get the virus to control any of it.
    Can anyone point me in the right direction?
    Thanks
    digi

    With the help of Bee Jay (much thanks), I figured this out. What you have to do is this
    First, use the Virus TI graphic user interface to create a Remote Template. You can learn how to do this by going to pages 24-26 of the Virus Control Tutorial.pdf (read it carefully). I would suggest creating a new template titled "Logic".
    In creating this template, you will need to create MIDI strings for each of the Virus' knobs (page 25-26 in the Virus Control Tutorial.pdf). I would suggest using some of the MIDI controller numbers for the ES1's parameters, which are listed on page 248 of the Logic Studio Instruments and Effects.pdf manual - if you do that, the ES1's knobs will respond to those Virus knobs for which you assigned the specific controller numbers listed for the ES1. Then you can create some more unique MIDI controller strings any extra (unassigned) Virus knobs. In any case, each of the Virus knobs has to be assigned to a unique MIDI Controller number.
    After this is done, you can use Logic's Controller Assignments "learn" function to assign the virus to control the other Logic instruments. First, make sure your Virus is in Remote mode and your new "Logic" Remote Template is loaded, and open up a Logic instrument (e.g., the ES2). Now hit command-L. Logic's Controller Assignments window will appear, but you can just drag it off to the side for the moment. Now click on a knob on the ES2, then twiddle the knob you want to use on the Virus. Do that for as many knobs as you want, then deactivate the "Learn" button on the Controller Assignments window when you're done.
    Then, whenever you want to control a Logic instrument which you've set up this way, you just need to put the Virus in Remote Mode and make sure you load the "Logic" Template.

  • I want a game controller that works with imac, I bought a steelseries 3gc but can't figure how to download the driver

    I bought  a steelseries 3gc game controller for my imac but can't figure how to download the driver. When I try to open, the essage is to open from an application. which one, I,ve tried some . any suggestions?

    Solved: There is no driver to install. If the lights come on for your controller, the drivers have successfully been installed and the controller is ready for use. But before you can use it you must buy an app called "Joystick Mapper" from the Mac app store ($5). This will allow you to program the individual buttons' functions per the game you're playing. You will need to program multiple profiles if you plan on playing multiple games, as all games do not share the same button configuration. Also, you can clone game profiles. So if you're playing a shooter, for example, where the zoom and weapon fire buttons may be the same but there's a different button for grenades or secondary fire, you can tweak a few buttons instead of starting over from scratch.

  • JTS transaction controller working with WAS 6

    We are using TopLink 9.0.4.4. It provides the controller class JTSExternalTransactionController_5_0 to work with WAS 5.0 .
    Where can I get JTS transaction controller that works with WAS 6 application server?
    Your info would be greatly appreciated.
    Haiwei

    I believe that the JTSExternalTransactionController_5_1 controller will work with WebSphere 6.

  • Best Practice to Setup an application to work with both oracle and db2 db

    Hi,
    We have an application that currently supports both oracle and db2 databases . It is currently using JPA with eclipselink as backend mechanism and we want to move to ADFBc as our backend . So what is best practice to do this?
    I came across an old post in https://groups.google.com/forum/#!topic/adf-methodology/UlJZSTu14Io that states to create two different model projects to support oracle and db2 .
    Is this still the standard ? Is there a way that we could work around rather than creating multiple projects?
    How do i get the view controller to work with multiple model projects if this is the case?
    Thank you.

    Thanks for the response .
    The problem is i would have the same schema on both the databases (both in oracle and db2) .
    I don't see a scenario where i want both the application model projects at the same time . What i meant is , Application will either be deployed with Oracle DB or DB2 but not with both on a production environment .
    So is there a way where i just change the connection parameters alone rather having two different models ?
    If i have to use two model projects ,  would it be possible say i built the view controller for Oracle , and use it for DB2 if i make sure the BC objects names are similar between model projects and switch just the model jar based on the deployment environment ?
    -Sam

  • My earbuds volume control don't work with my iphone, but it does on my ipod?

    I've done everything from blowing in the headphone jack to cleaning it with an q-tip and restoring the iphone. i know my ear buds work since the volume up and down and the play and pause controlls all work with my ipod touch but when i try using it with my iphone the controls still don't work. i'm about to go over to apple and get this replaced. the iphone is pretty much new too. i might've gotten some water inside it when i was putting on my screen protector but it wasnt that much.

    Count me in. I have the "Backup ccould not be completed" error since november.
    Yesterday it worked once right after I restored my iPad while iTunes transfered all the data back to my iPad. So it is definitely not a problem on the iCloud side but on the iPad's Apps side.
    My guess is that it might be just one app's data which blocks iOS from backing up correctly...
    Any ideas?

  • Oracle 11g XE not working with oracle BI publisher 10g after enabling ACL

    Hello,
    I previously work with oracle 10gXE and Oracle BI publisher 10g and it work fine. now i install oracle 11g XE and try to configure it with oracle Bi Publlisher, it show this error
    "ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1324 ORA-12570: TNS:packet reader failure" after runing the ACL package to neable network service.
    on the database.
    Please can any body tell be why this is not working. Tanx.

    You'll need to add the apex engine owner to the ACL (Access Control List). Depending on your version of apex the user name varies. i.e. 4.0 is APEX_040000
    See Joel's blog for info about the ACL and APEX.
    [http://joelkallman.blogspot.com/2010/10/application-express-network-acls-and.html]

  • Will SATA 11  HD work with sonnet SATA controller

    Hi I need more space and have seen this on eBay
    Will it work with my G4 Giga fitted with a Sonnet Serial ATA (it doesn't say whether or not on the box.)
    I already have a Seagate 7200 3.5 500gb fitted and it works fine.
    If my Sonnet is not compatible what is the biggest HD I can fit using the Sonnet SATA controler?
    TIA

    Hi-
    The Sonnet SATA controller will support up to the current 1TB models.
    Not sure about the "kit". The software that is included is most probably PC. And, there are no guarantees that the cables provided will work for you. Typically, a 270º connector is best for the data cable. Depending on the drive, some have "legacy" Molex power connectors, so the power cable wouldn't be necessary. And, as with the data cable, a 90º power cable would allow better fit when closing the door of the tower.
    But, if the price is right, it could be cheaper than a bare drive alone, and you don't have to use the rest of the kit...
    If it 's just the Seagate hard drive, the 7200.11 1TB will work. So will the Hitachi 7K1000 1TB drive. And, so will the Western Digital GP 1TB drive.
    While no specific information that it is needed, the Seagate has a jumper to force 1.5Gb/s. The WD drive has a similar "Opti 1" jumper. The drives should auto negotiate to the lower transfer rate, so this should not be an issue with SATA II drives and the Sonnet.

  • Best WAP to work with a 2500 Controller?

    My client wants to upgrade from several consumer grade WAPs to something with better roaming/mobility capabilities.  I think the 2500 controller would do the job but I'm not sure which access points will work with the controller.  Do I go with the 1600 series or something else?
    Thanks,
    Joe                  

    What's wrong with the 1600
    ClearAir LITE.  It's CleanAir but done on software.  Unlike the 2600/3600, CleanAir is done on a dedicated hardware (better).

Maybe you are looking for