3850 mobility - - named ACLS From ISE

Hi all
i'm middle in the test for 3850 MC- Downloadable ACLs, i settle up at ISE and working good in 2960. But as you know
when i use DACL with WLC(3850). ISE just send ACLs name and WLC get that ACLs name then ACLs working on.
But i think ISE send a acls name but wlc not working... i already double check acls name..and.. what?
So do you have any document for this? Step by Step.
thank you

thank you salodh
OK Not a downlodable ACLs in WLC, I want know is ISE give a named ACLs to WLC and ACLs works in
WLC for Wireless Client. am i clear?
i configured ACLs of WLC at ISE and also made same acl in WLC but ACLS didn't work.

Similar Messages

Named ACL issue

Hi all
---R1------R2
Both R1 and R2 run EIGRP. now there is the prefix 172.16.(1~255).0/24,and the summary prefix 172.16.0.0/16 coming into R1,
Here has a problem: they require only can use "PERMIT" and named ACL at R1's interface which links to R2 to deny the prefix 172.16.10.0/24 into the R2.
what shall i do?
thanks advance!

Hi Matthew,
Could you please explain the task more clearly. I'm a little confused:
The summary prefix 172.16.0.0/16 comes from R2-to-R1.
I believe the task is to deny prefix 172.16.10.0/24 coming from R2-to-R1.
Are there any other conditions?
Can I remove and change the summarization on R2?
Is there a limitation on the number of acl statements on R1?
Cheers:
Istvan

Does QPM 4.1 support Named ACLs

Could any help with this, i downloaded a trial version of QPM and i am trying to import a QoS policy from our switches and its failing as the ACLs used for classification on the switches are Named ACLs. Does QPM support Named ACLs or not?

A lot of it stems from the large and complex nature of the models we employ. Hardly a week goes by that we don't grind to a halt due to a bug in jpox. That then leeds to the thorny problem of trying to discuss the problem on the jpox forums, where there are basically only two members that know the product well enough to help... Net result, they are overwhelmed, and from one of them it comes across in the rudeness of replies. This puts people off, including us.
I contrast this with the Hibernate and Spring communities, which I have personally been involved with and found to be both thriving and rewarding.
A bit of QA and respecteful support will be wonderfull. We are happy to pay a company for that because of the man hours it saves. I sincerely hope that Kodo JDO works out for us.

Cannot send an email from my alias Mobile Me account from the iPhone.

I have a Mobile Me email account which works perfectly on my Mac and iPhone. I created a an Alias Mobile Me Account on the web.
I am able to create a new email from the alias account on the Mac.
The iPhone will not recognize the alias account, I cannot add it or sync the account.
I cannot send an email from my alias Mobile Me account from the iPhone.

To all frustrated MobileMe alias owners who want to send email from iPhone - please go to the feedback area of the apple.com and leave messages regarding this issue. I had a lengthy conversation with a tech support guy who agreed that this is a needed fix - he said to initiate a grass roots effort - and that by all of us leaving messages it will eventually get attention and fixed. Why would Apple give us the ability to create alias's, use them on mobileme website, on our mac mail programs, but NOT the iPhone, which is the MOBILE device. Silly. Please protest!! Thanks.

I can't log into my mobile me account from my lap top. Is it because of my operating system? I'm on Mac OS X 10.6.8?

I can't log into my mobile me account from my lap top. Is it because of my operating system? I'm on Mac OS X 10.6.8? Every time I try to enter my data in on the control panel I get an error that says; "Your MobileMe member name or password may be invalid. Please enter a different name or password." I know the name and password is correct because I can log in via the Web.

Apple discontinued it on June 30, 2012. Many of its services are now provided by iCloud; anything which connects specifically to MobileMe won't work.
(89929)

ID Named Ranges from Excel 2003 not appearing in 2007

ID CS3, Office/Excel 2007, PC based.
I recently upgraded from Office 2003 to Office 2007. Open an Excel file and save it as Office 2007 document. All the named ranges that I had previously set up are still there.
I go to ID and want to update the links - I get the message that link isn't found, re-link. I try to place the Excel named ranges from the Office 2007 document into ID, but the named ranges don't show up in the Cell Range box in the Microsoft Excel Import Options window.
Anybody else experience this?
JAG

Thanks. Maybe I can get CS4 (or CS5) worked into the budget for 2011.
JAG

Using Weblogic ACL from Tomcat in Servlet/SJP

Hi all,
I'm trying to use weblogic ACL from a servlet in a remote Servlet/JSP
container (Tomcat). I've managed to log a user as decribed is the
"examples.security.acl.Client exemple" but what i need now is to be able to
get back the user group and/or permissions. Does anyone have done this
before ? I've look in the Weblogic documentation center but I did not manage
to found any exemple.
Thank you in advance.
Frederic

Sorry, but I believe you are going to be limited to the information
available through the JNDI interface and the interfaces of the EJB's that
you deploy to the weblogic EJB container. The ACL information is intended
for use only within the scope of the server environment. So, even though you
are running as a Servlet/JSP you're running in the Tomcat container which is
actually outside the weblogic Servlet/JSP or EJB container(s), in essance
you're running under the same access limitiations as an EJB client app.
BTW, you do realize that the weblogic 6.0 server does include a very nice
Servlet/JSP container?
Alfred Wallace <[email protected]> wrote in message
news:3a9fbc66$[email protected]..
Hi all,
I'm trying to use weblogic ACL from a servlet in a remote Servlet/JSP
container (Tomcat). I've managed to log a user as decribed is the
"examples.security.acl.Client exemple" but what i need now is to be ableto
get back the user group and/or permissions. Does anyone have done this
before ? I've look in the Weblogic documentation center but I did notmanage
to found any exemple.
Thank you in advance.
Frederic

HT1923 i cannot uninstall apple mobile device support from my pc

I cannot uninstall apple mobile device support from my Windows 7 pc ??
Regards Paul

Try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

I bought an iphone6 T-Mobile Contract free from US. Can i gift it to my parents in India. Will a nano-SIM card with any Indian carrier work? Will my international warranty still be valid?

I bought an iphone6 T-Mobile Contract free from US. Can i gift it to my parents in India.?
Will a nano-SIM card with any Indian carrier work? They will have to just toss away the T-Mobile SIM and put in nano sim for any Indian carrier, right?
Will my international warranty still be valid? In case of any repairs/services, can that be done in India? Will these services be charged while the phone is in warranty period?

If the phone is purchased in the united states, warranty service will need to be provided in the united states.

Edit GUID for Group? ACLs from old server no good

Hi, we're trying to upgrade from an old server running OSX Server 10.4.11 to a new Mac Mini running Lion Server. Our 'hopes & dreams' were to be able to keep everything the same so we could just switch over and keep working with no interuption.
Our needs are pretty basic, with only using 6-8 local user accounts (no network accounts), 2-3 main groups, and mostly file sharing and VPN.
So I tried to setup the users and groups with the same long names, shortnames, passwords and UID/GIDs as our old server. Then for our main old shared files drive, we cloned the entire contents to our new RAID drive using SuperDuper, making sure to check 'retain ACLs'. We were 'hoping' to retain all of the ACLs so we wouldn't have to reapply them to thousands and thousands of files/folders. Even with only a couple groups and not too many ACLs, it would still be a pain.
Unfortunately, when I examing the permissions for files & folders on the new drive, instead of the group short names for the ACE's it is listing a long number which I believe is a GUID?!? (instead of the group name 'sales' it might say 'A4688EB67-6478-AADE-AA97-006545897979' for the User or Group). But the actual ACE's applied are correct, so those did in fact stay intact.
- So am I understanding correctly that setting the same GIDs for the groups was not enough, there was a hidden 'GUID' that I was not aware of that is now out-of-sync?
- If so, is there any way to edit this number for a group so that the ACLs will find the proper groups again?
- If THIS is possible, how would I find the GUIDs for the old groups in Tiger Server so I could port them over???
- Any other options other than resetting all of the ACLs from scratch???
THANKS!

Sorry, was easier than I thought. Just haven't worked on the server in a while.
If it helps anyone for whom this isn't obvious, I exported the users & groups from the Tiger server using Workgroup Manager, then imported them into our Lion Server. This brings all the proper GUIDs with it and now all of our ACLs look correct.
Note to self: somtimes the easy method actually works (with all the differences, I wouldn't have been certain the Tiger users could be imported directly in).

Naming exception from the pcd... occurred in PI 7.1

In PI 7.1 Iu2019ve got a process which gets invoked as SOAP service and synchronously calls a second SOAP service. The service returns the correct result and works, when called from the Web Services Navigator. When I call the Service on PI the Web Services Navigator only shows a NullPointerException (although the service gets invoked). The Message Monitoring of the Runtime Workbench doesnu2019t show any Message at all.
I looked at the Trace-Log and found the Message:
Naming exception from the pcd when trying to access the principal ROLE.PCD_ROLE_PERSISTENCE.VvlvkEGjiW9zPFaxR/4pd2/bX5Q=
Has anybody got an idea what could cause this behavior or how one can solve this problem? As far as I could find out PCD_ROLE_PERSISTENCE is part of the portal which is not meant to be Part of PI.
Regards,
Tarik

Hello Osman,
We are also facing same ROLE.PCD_ROLE_PERSISTENCE.VvlvkEGjiW9zPFaxR/4pd2/bX5Q= error.
Also when I send a message via SAOPUI I get error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.
How did you exactly solve your issue?
System: PI 7.1
SP: 71006

Named ACL and ACE numbering

I created a new extended named ACL and enter a few ACEs numbered 10,20,30,100,110,1000 to give them plenty of space apart. When I reload the switch, the numbering has disappeared and they are all spaced 10 apart. Why does this happen and is there a way to maintain larger spaces? I am thinking that in time I may come to make many modifications to the ACL and the gap between two entries may reduce to nothing. I am not going to reload my switch just to reset the gaps and I would rather not remove the ACL completely and replace it to achieve the same.
thanks for any advice
Chris

The ACL is stored in RAM initially. When you display your access-list for instance you see the seqeunce numbers. When you display your're running configuration you don't see them.
Are you using ip access-list or the traditional access-list?
ip access-list extended Popey
10 permit ip host 10.10.10.10 any
100 permit ip 10.10.20.0 0.0.0.255 any
1000 deny ip any any

HT5129 all of my albums in mobile me came from my albums in iPhoto. will mobile me recognize that, or would it place a duplicate copy back to my iPhoto?

all of my ablums in mobile me came from my albums in iPhoto. will mobile me recognize that? or would it migrate duplicates back to my iPhoto? thanks.

OT - Unfortunately, Apple hasn't made it that easy. They've tried, but didn't get there. I have been logged out of MMe from the System Preferences for months, and I am still getting the new message now every time I open iPhoto to migrate my albums to iPhoto from MMe. I deleted those photos (which I had also like fatsojung loaded from iPhoto in the first place, but now have divided some of those to separate libraries for space), and even had deleted the albums from MMe! Thought I was DONE with MMe months ago!! Now I'm getting the following message when I try to delete my MMe account from my iPhoto preferences to stop the message:
"31 albums will be removed from your IPHOTO LIBRARY."!!!! Is that a typo?? Shouldn't it say "MobileMe gallery"? As those photos are still in my iPhoto library, I certainly do NOT want them deleted from iPhoto! And why does it still have all 31 albums in there when I deleted them from MMe months ago?? I feel like I'm in a horrible loop that won't let me go!
It's just a pain if I have to let it download all those pictures into my iPhoto trash, then delete them AGAIN. And frankly I'm a bit worried that it will confuse it with my originals that are still in that library. Good thing I have Time Machine!
Any insight as to what actually happens when we click "Remove"? Thanks.

Creating mobile me album from smart album

I've created a smart album of approximately 450 photos (my 5 star photos) from an original album of about 2,000 photos. When I try to publish a mobile me album from my smart album of 450, it includes all 2,000 photos and won't let me do it. How do I do this???

dana v wrote:
OK....I just tried working with an album that didn't have stacks, and I'm having the same problem. When I try and make a separate album, or mobile me album, with just the 5 star photos, it automatically includes all of the photos when creating the album. So I don't think that is always the problem.
Selecting a subset of images in an album and making a new album from just those images works as long as there are no stacks involved. Where did the images in the album come from?
Do this select a project that has no stacks in it. Note the number of images displayed at the bottom of the window. Select half note the number of images selected. Make a new album from the selection. How many images in the album?
Now in that album select half again and make an album, Again how many images in the new window?
I'm betting you still have stacks involved in this somewhere. You really need to step back and try the steps I've outlined. Start with a project with no stacks and see what you get.

Placing Named Ranges from Excel into InDesign

InDesign CS3 5.0.4, Excel 2003, Windows XP.
I have placed named ranges from Excel into InDesign and linked them. The Excel file consists of multiple worksheets. I go back now a few months later to update the files. I go to place a couple of new ranges from new worksheets and they don't show up under the correct sheet. ALL my named ranges now show up under the first worksheet only.
Anybody ever had this happen?
JAG

I've upgraded to CS5.5. Ninety-nine times out of a hundred placing named ranges into InDesign from Excel works fine. One time out of a hundred I still see all my named ranges on the first worksheet and none on the rest of the worksheets where I originally named them.
I save the Excel files as XLS.
Am I the only one in the universe having this problem?
Can I get an answer?
JAG

3850 mobility - - named ACLS From ISE

Similar Messages

Maybe you are looking for