3925 FXO not excepting analog calls

3925 FXO not excepting analog calls fast busy.
Dial tone checked OK..
fowarding on unregistered correct.
Ports have been reset.

I feel you need to enable "disconnect supervision". Anybody has more inputs for this?

Similar Messages

FXO not receiving the call

Hello,
I'm using a 1760 router with 1 FWO port, and a PVDM of 256.
The FXO ports are connected to a PABX with 4 extensions. And three of them are working correctly. The fourth one is not receiving any call when using the extension. And when conncting the PABX directly to an analog phone, it receives the call.
What can be the problem ?
To be clearer, only one port is not receiving the call, and sometimes the same port works with another extension.
Any suggestion ?
Regards,
Omar

Omar,
I don't think so. In case you are using PVDM-256K-4 then you can use 4 lines of G.729a Medium Complexity. Would you please test making a call to that port? Does it work? To make sure that the 4th can work correctly.
This is a useful link.
http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml
Toshi

EJB is not throwing exception to calling Action class in Unix environment

Hi
We are using Weblogic Server 9.2.3.0.
One of our EJB is not throwing exception to calling Action class in Unix environment. Its working fine in Windows.
Somehow the EJB is swallowing the exception.
any idea? I suspect it may be environmental issue?
thank you

Hi
We are using Weblogic Server 9.2.3.0.
One of our EJB is not throwing exception to calling Action class in Unix environment. Its working fine in Windows.
Somehow the EJB is swallowing the exception.
any idea? I suspect it may be environmental issue?
thank you

FXO not disconnecting from remote call

Hope this is the correct place to post my issue, I'm running CCME on a 2801 with IOS c2801-ipvoicek9-mz.124-11.T.bin, I can make calls ok and also receive them ok, my problems start when I do not answer the call; I have tested this using my mobile; when I call my land line it rings as normal but if I end the call from the mobile the phone keeps ringing for another two minutes, does anybody know what is causing the FXO to hold the call for another two minutes
Many Thanks
Martyn

Hi
I have the issue with AA from CUE, the FXO port stay off hook for a while, so if you can show me your config to see the AA it would be great.
here is the mine
voice class custom-cptone bolivar
dualtone disconnect
frequency 1450
cadence 500 500
voice-port 0/1/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone bolivar
no battery-reversal
no vad
cptone VE
timeouts call-disconnect 5
timeouts wait-release 5
timing hookflash-out 100
timing guard-out 300
connection plar opx 105598 <---- AA RP
station-id name L1 XXXXXXXX
station-id number XXXXXXXX
If I change the DN from the RP to an IP Phone and this not answer the call everything work as expected
Thanks for any help you could give me

Every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again I tried all but nothing, everything works except the call I have an iPhone 4 Version 6.1.3

every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again
I tried all but nothing, everything works except the call
I have an iPhone 4 Version 6.1.3
thank you for your help

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

RFC call ended with "Communication Failure" exception (Function call failed; could not find the function

Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
Vivek

Hello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
   me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
     EXPORTING
       iv_subrc            = lv_subrc
       iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin

SocketTimeout Exception while calling a Web Service from EJB

Hi All,
I am consuming a Web Service defined from the WSDL received from a PI system
in a Stateless EJB.
The input of the Service can be a range of records 100 - 10,000, with a furture plan to exceed the range as 100 - 15,000.
The Web Service Call goes perfect with 100 - 3500 number of records.
As the number of records exceed 3500, we started getting the following exception:
Service call exception; nested exception is: java.net.SocketTimeoutException: Read timed out
Along with a call happenning to the PI system after some seconds.
Referring to various help.sap.com pages, I came across the following code snippet:
client._setProperty("socketTimeOut","200000");
This thing works great!!!, and now we have set the the socketTimeout proggramatically to a satisfactory level which supports the current requirement.
I would like to know, if we can tune some Visual Administrator Parameter for this, instead of maintaining the "Socket TimeOut" in the code.
Any help will be appreciated.
Best Regards,
Alka.
Edited by: Alka Panday on Apr 23, 2008 9:17 AM

Hi Alka,
Please refer to SAP Note 962114. This is specifically for Web Service clients.
Description-->
This note can be applied for 6.40 SP 12+. If the customer has a lower SP, an upgrade of the whole engine is recommended. The other alternative to set the timeout is to set it programmatically.
If running a 7.0 installation, the functionality has been integrated in SP8 onwards
When you go to the Visual Administrator -> Server -> Services -> Web Services Container on the Settings tab page you should be able to see the socket timeout input field next to the HTTP Proxy settings. You can change the default value there and it will be automatically applied to all WS client proxies and logical ports deployed on the system.
Hope this helps.
regards,
Piyush

JDBC Exception while calling a web-service

Hi all,
We are getting the following JDBC Driver Timeout Exception while calling an external web-service..
An exception occurred while executing a transaction. Details: An error occurred while accesing the database. Detail:SQL statement: ' SELECT INSTANCEDATA, PROCESSID, INSTID, THREADID, NAME, PARENTTHREAD, PRIORITY, CREATIONTIME, AUTHOR, PARTICIPANT, NEXTPARTICIPANT, PROCESSDEADLINE, ACTIVITYDEADLINE, RECEIVETIME, ACTIVITYNAME, NTHREADS, CTHREADS, FCTHREAD, TOTALTHREADS, STATE, SOURCEACTIVITYNAME, ROLEIN, PENDINGITEMID, LASTRESULT, ITEMDEADLINE, NCHANGES , NREMARKS, NATTACHMENTS, HASPARTFORROLE,MICROACTIVITYNAME FROM PPROCINSTANCE WHERE PROCESSID = 11AND INSTID = 10 AND THREADID = 0 FOR UPDATE' Caused by: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock fuego.transaction.DatabaseException:
How do we resolve this exception?
We have increased the JTA timeout to 120 seconds.. in the engine..
Our process is deployed on Weblogic Server

Looks like specific record for the Instance id 10 is locked in the Engine table. I am not quite sure, what kind of Business scenraio you executed to end up in this issue.
But you can try restarting the BPM engine or check with the Oracle DBA to see any lock on the rows in Engine database and perform required unlocking operations.
-Lovin.V

I have a ipod mini from 2005, it will only work on my charger. I did get a new ipod 4touch, how do i get the music to the new one if i don't know the password of the mini. My ex-husband set it up for me, i not aboout to call and ask for the password.

I have a ipod mini from 2005, it will only work on my charger. I did get a new i pod touch 4, how do i get the music from the old mini to the new touch. I have never put any music on it myself, my ex-husband did it all and has the password. I never new it. I'm sure not about to call him and I don't think he'd give it to me anyway. Please help!!!

I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
The simple software "lock" used on iPods should not prevent you from off-loading the song files. Once the song files are on your computer, you can add them to your iTunes library. Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
NOTE: For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen. The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.

Exception while calling native profiler (root cause: no message available [

Hi,
We are setting up MAM30 using the new technology (NWMADMIN). During sync. I get the error message "Exception while calling native profiler (root cause: no message available [java.lang.reflect.Invocat...". Can anyone help me on this?
Thanks
Kind regards
Jacob

Hi Jacob,
I once faced this problem(no in MAM though)
I will try to guess the solution to your problem,
1) My first guess would be that, the header file in MAM30 using the 'javah' tool, did not pass the fully qualified name of the class as the argument. The 'javah' tool will not complain and will produce an incorrect header file.
2) The Native method names wouldnt have got a match for the java method names, might be missing the package name. here you need to import the missing ones.
3) Or you would be calling static native methods using objects, it should be accessed in a static way. you can call them directly.
Hope this helps.
Regards
Divya.

OCI-01555 exception on calling OracleXmlType .Value method

Hi,
I'm using Oracle 10g EX, and ODAC 1020221. I created an ODP.net based C# webservice that reads/writes xml data using stored procedures.
I implemented the read as illustrated below:
OracleConnection connection = new OracleConnection(...);
OracleCommand command = connection.CreateCommand();
OracleParameter param = command.CreateParameter();
param.ParameterName = "XML_COL";
param.OracleDbType = OracleDbType.XmlType;
param.Direction = ParameterDirection.Output;
command.ExecuteNonQuery();
OracleParameter param = command.Parameters["XML_COL"];
OracleXmlType xmlType = (OracleXmlType)param.Value;
string value = xmlType.Value;
This works fine as long I call it in a single-threaded test.
However, when I run a multi-threaded test with more than 2 threads I'm getting the occasional exception on calling xmlType.Value:
OCI-01555: Message 1555 not found; product=RDBMS; facility=OCI
at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx,
Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src)
at Oracle.DataAccess.Types.OracleXmlType.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src)
at Oracle.DataAccess.Types.OracleXmlType.get_Value()
Surprisingly, I have not been able to find any documentation regarding this error, though there is a ORA error with the same number indicating some rollback size issues.
The problem seem to occur when another thread in my webservice updates the same record. The stored procedure is "safe-guarded" by a lock, however, I didn't implement additional locking in my webservice, because a) I thought odp.net can cope, and b) ado.net/sql has no problem with this approach, but perhaps I assumed wrongly?
Has anybody seen this exception before and can explain what this is all about?
Many thanks,
Frank
Edited by: 803211 on 19-Oct-2010 01:46

we meet exactly the same problem.
Did you fix it?

1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

Hi. please solve my problem.
.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
thank you in advance.

Hi Ersin,
Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform. However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module. I can think of no reason why the different calling method would be a factor.
When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
Regards,
Nick

I Deleted Files. now discs and externals are not excepted

Well here's the deal i got something in disk utilities that said this
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
I'm not sure if those are the exact files but long story short i called a friend up and he said if a file is giving you trouble delete it. And now because of what i deleted my computer does not except discs so i can't put the install disc back in. and oh joy my external harddrives are not showing up ether so i can't use time machine to restore what has been deleted. HELP PLEASE!
even better spotlight doesn't work and i can't install dmg files. what can i do??
Message was edited by: Keenan M
Message was edited by: Keenan M

when i insert a disk it says "The disk you inserted was not readable by this computer"
i have no idea how to fix this.

My new IPhone 6 will not receive a call from my wife's phone

I have a new IPhone 6. It will receive and ring all calls except from my wife's IPhone 5?
Her number is not blocked.
Any help?

Can your wife make phone calls to others? If her number is not blocked on your device, there is no reason you should not receive a call from her, unless she cannot make calls to others. A block would be the only reason you should not receive a call. Check with your carrier to make sure there is no restriction on their end.

Exception in calling methods on a com object using jcom

Hi All,
I am trying to conect to CognosUpfront thorugh there com interface using weblogic
jcom architecture.
Steps followed :
Generated java classes for corresponding com dll
Added it to classpath
Enable the jcom mode and native mode of server.
Register the server jvm for native mode using regjvm.
After following all these steps I am able to create the object of UpfrontSession
but I am not able to call any method on this.
Its giving me NullPointerException
Can someone help me to solve this problem...
Stacktrace is below
java.lang.NullPointerException
at bicognos.UpfrontSession.login(UpfrontSession.java:192)
at jsp_servlet._portlets._iframetest.__iframetest._jspService(iframeTest
.jsp:29)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:387)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilte
r.java:313)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilt
er.java:190)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:6316)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Thanx and regards,
Manish Rathi

kamranA wrote:
cout << "Part Number = " << part.getNumber() << endl;
This is exactly what Jace, http://jace.reyelts.com/jace, helps you do. Your code would look exactly like this:JNIEXPORT jobjectArray JNICALL Java_translate_CgmTranslation_createCGM
( JNIEnv *env, jobject thisobject, jobject jPart ) {
Part part( jPart );
cout << "Part Number = " << part.getNumber() << endl;
}The roughly equivalent bare-bones JNI would be:JNIEXPORT jobjectArray JNICALL Java_translate_CgmTranslation_createCGM
( JNIEnv *env, jobject thisobject, jobject jPart ) {
jclass partClass = env->GetObjectClass( jPart );
jmethodID partNumberMethod = env->GetMethodID( partClass, "getNumber", "()Ljava/lang/String;" );
if ( ! methodID ) {
    cout << "Unable to locate the method ID for Part.getNumber()" << endl;
    return;
jstring jPartNumberStr = static_cast<jstring>( env->CallObjectMethod( jPart, partNumberMethod ) );
if ( env->ExceptionOccurred() ) {
    cout << "An exception occurred while calling Part.getNumber()" << endl;
    return;
const char* partNumberStr = env->GetStringUTFChars( jPartNumberStr, NULL );
if ( ! partNumberStr ) {
    cout << "A JNI failure occurred while trying to retrieve the contents of the part number string." << endl;
    return;
cout << "Part Number = " << partNumberStr << endl;
env->ReleaseStringUTFChars( jPartNumberStr, partNumberStr );
}See any differences?
God bless,
-Toby Reyelts

3925 FXO not excepting analog calls

Similar Messages

Maybe you are looking for