3925 Reboot odd rebooted

We have 2 router as HA for VPN.
1 rebooted, Please help me find what's the reason.
by sh ver, it looks like someone reload the router. but I check AAA log, no record at that time.
in router log there is some"configured from console by console." is tis means someone log in router by console cable?
Show ver:
System returned to ROM by reload at 21:41:16 GMT Mon Jun 9 2014
System restarted at 21:43:09 GMT Mon Jun 9 2014
System image file is "flash:/c3900-universalk9-mz.SPA.152-4.M6a.bin"
Last reload type: Normal Reload
Last reload reason: reload
Show logg result on router is:
Jun 9 19:43:17.463: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Jun 9 19:43:17.639: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Jun 9 19:43:32.871: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Jun 9 19:43:32.871: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Jun 9 19:43:32.871: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
*Jun 9 19:43:32.871: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
*Jun 9 19:43:33.427: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Jun 9 19:43:33.871: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Jun 9 19:43:33.871: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Jun 9 19:43:33.871: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
*Jun 9 19:43:33.871: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
*Jun 9 19:43:34.887: %AAAA-4-CLI_DEPRECATED: WARNING: Command has been added to the configuration but Type 4 passwords have
been deprecated. Migrate to a supported password type
*Jun 9 21:43:34.903: %SYS-6-CLOCKUPDATE: System clock has been updated from 19:43:34 UTC Mon Jun 9 2014 to 21:43:34 GMT Mon
Jun 9 2014, configured from console by console.
*Jun 9 21:43:35.163: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.96.4.127 port 514 CLI Request Triggered
*Jun 9 21:43:35.603: %SYS-5-CONFIG_I: Configured from memory by console
*Jun 9 21:43:35.911: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(4)M6a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Tue 15-Apr-14 08:48 by prod_rel_team
*Jun 9 21:43:35.951: %SNMP-5-COLDSTART: SNMP agent on host emeaxrar3925_02 is undergoing a cold start
*Jun 9 21:43:35.959: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Jun 9 21:43:35.963: %ETHSW_SM-3-ILP_RECOVERY_COMPLETE: Time taken for recovery after reload = 0 seconds.
*Jun 9 21:43:35.975: %SYS-6-BOOTTIME: Time taken to reboot after reload = 142 seconds
*Jun 9 21:43:35.979: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jun 9 21:43:35.979: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jun 9 21:43:35.979: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is ON
*Jun 9 21:43:36.079: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Jun 9 21:43:36.087: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.96.4.127 port 514 started - CLI initiated
*Jun 9 21:43:36.295: %VPN_HW-6-INFO_LOC: Crypto engine: slot 0 State changed to: Initialized
*Jun 9 21:43:36.295: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Disabled
*Jun 9 21:43:36.307: %VPN_HW-6-INFO_LOC: Crypto engine: slot 0 State changed to: Enabled
*Jun 9 21:43:36.307: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jun 9 21:43:36.307: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jun 9 21:43:37.008: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*Jun 9 21:43:37.036: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
*Jun 9 21:43:37.296: %LINEPROTO-5-UPDOWN: Line protocol on Interface ISM VPN Accelerator, changed state to up
*Jun 9 21:43:37.695: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
*Jun 9 21:43:38.008: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
*Jun 9 21:43:38.696: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
*Jun 9 21:43:40.552: %OSPF-5-ADJCHG: Process 1, Nbr 10.64.99.11 on GigabitEthernet1/0 from LOADING to FULL, Loading Done
*Jun 9 21:43:46.888: %OSPF-5-ADJCHG: Process 1, Nbr 10.64.99.8 on GigabitEthernet0/0 from LOADING to FULL, Loading Done
*Jun 9 21:44:06.720: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
*Jun 9 21:44:13.028: %HSRP-5-STATECHANGE: GigabitEthernet0/1 Grp 3 state Speak -> Standby
Also I found some log on logging server:
Jun 10 03:52:16 10.64.97.154 49: Jun 9 21:52:15.024: %SEC-6-IPACCESSLOGP: list 199 permitted tcp 10.109.18.107(57503) -> 0.0.0.0(22), 1 packet
Jun 10 03:46:28 10.64.97.154 48: Jun 9 21:46:26.865: %SEC-6-IPACCESSLOGP: list 199 permitted tcp 10.109.18.107(57503) -> 0.0.0.0(22), 1 packet
Jun 10 03:44:16 10.64.97.154 47: *Jun 9 21:44:13.028: %HSRP-5-STATECHANGE: GigabitEthernet0/1 Grp 3 state Speak -> Standby
Jun 10 03:44:10 10.64.97.154 46: *Jun 9 21:44:06.720: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Jun 10 03:41:17 10.64.97.154 52: Jun 9 21:41:16.543: %HSRP-5-STATECHANGE: GigabitEthernet0/1 Grp 3 state Standby -> Init
Jun 10 03:41:17 10.64.97.154 51: Jun 9 21:41:16.543: %RF_INTERDEV-4-RELOAD: % RF induced self-reload. my state = STANDBY COLD-CONFIG peer state = ACTIVE
Jun 10 03:41:17 10.64.97.154 50: Jun 9 21:41:16.543: %RF-5-RF_RELOAD: Self reload. Reason: Reloading self per request of peer
Jun 10 03:40:13 10.64.97.154 49: Jun 9 21:40:12.011: %OSPF-5-ADJCHG: Process 1, Nbr 10.64.99.11 on GigabitEthernet1/0 from LOADING to FULL, Loading Done
Jun 10 03:40:10 10.64.97.154 48: Jun 9 21:40:09.807: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Jun 10 03:39:40 10.64.97.154 47: Jun 9 21:39:39.807: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Jun 10 03:39:16 10.64.97.154 46: Jun 9 21:39:15.791: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Jun 10 03:39:16 10.64.97.154 45: Jun 9 21:39:15.787: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Jun 10 03:38:27 10.64.97.154 44: *Jun 9 21:38:25.420: %HSRP-5-STATECHANGE: GigabitEthernet0/1 Grp 3 state Speak -> Standby
Jun 10 03:38:20 10.64.97.154 43: *Jun 9 21:38:17.812: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

Configure AAA auth for console access too and configure "archive" feature on router for next time...
BR,
Dragan

Similar Messages

Odd graphics problem, eventually leads to forced reboot, or even BSOD

I am fairly certain that this is firefox related, or plug in or maybe compatability issue, however I'm getting weird blocky graphics. which occasionlly seem to begin from a flash frame within a page, but I can't say this is 100% the cause. It looks like small multicolored boxes that are in odd patterns. and causes other odd graphics, it gets worse the longer I let it set. One time for the heck of it I rolled the scroll bar up and down about 10 times very quickly and it caused a BSOD. These odd graphics do not ever appear if I don't open Firefox (have been using IE today) but they do not disappear if I see them and then shut down Firefox. Usually I'm forced to reboot the computer because they take over too much of the screen, I can't see anything. It does change though, when I move windows and such, they are not limited to the Firefox window and spread to the empty desktop too.

Checked settings for Flash and I couldn't find hardware acceleration. 1st tab on Settings Manager is "Storage" and gives options for saving information on my computer ie. "Allow sites to save information on this computer"
2nd tab is Camera and Mic "Ask me when a site wants to use the camera or microphone"
3rd is Playback "Ask me when a site wants to use peer-assisted networking"
4th (last) is Advanced "Check for updates automatically" a couple other settings but no acceleration.

I'm getting syntax error on a python instruction. it looks good but crashes. (print "Odd",num) becomes (print ‚Äúodd ‚Äú, num) 70 72 69 6E 74 20 E2 80 9C 6F 64 64 20 E2 80 9C 2C 20 6E 75 6D I've rebooted and changed keyboard

I’m getting syntax error on a python instruction. it looks good but crashes. (print “Odd",num) becomes (print ‚Äúodd ‚Äú, num) 70 72 69 6E 74 20 E2 80 9C 6F 64 64 20 E2 80 9C 2C 20 6E 75 6D I’ve rebooted and changed keyboard

It worked when typed in from the command line. Doesn't when its pasted in from Text Edit, rtf or txt.

Reboot and select proper Boot Device on Satellite C55-B5200, odd not present

I have a new laptop barley used. I bought this back in August then bam in January it started giving me this error message "Reboot and select proper Boot Device".
I'd like to get this fixed so I can start using it again. I tried pressing f2 on restart and when it powers up it says
CPU/SSD: HGST HTS545050A7E380
ODD: NOT PRESENT
SYSTEM DATE: 1/16/2015
on Satellite C55-B5200, odd not present
Is there something specific I should do to get this running again?

it started giving me this error message "Reboot and select proper Boot Device".
It is not finding or communicating with the hard drive to boot, most of the time it is a bad hard drive or bios is not set correctly for the operating system.
f2 to enter the bios then f9 to set bios to the defaults, then f10 to save - then try to start.
What you are saying the bios reads is wierd?
CPU/SSD: HGST HTS545050A7E380 -- that is the hard drive: HGST Travelstar Z5K500 HTS545050A7E380 (0J11285) 500GB 5400 RPM 8MB Cache SATA 3.0Gb/s 2.5" Internal Notebook Hard Drive.
ODD: NOT PRESENT - ?
SYSTEM DATE: 1/16/2015
on Satellite C55-B5200, odd not present - ?
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200008272
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Odd TextEdit file pops up after rebooting

Why did this text file open in text edit upon reboot? The title is iMovieToGarageBandWorkflow. I've never seen it before and when I spotlight search for the file it is not even found. I google that file name and nothing comes up either. I have not installed anything recently. I did just remove a few random applications I hadn't used in a long time, rebooted, repaired permissions, rebooted, ran a backup image to an external with CCC, booted from the backup and THEN this file came up. I then booted from the local drive and not surprisingly, this file popped up again. Seems really odd. Any thoughts what it is or where is came from?
I included both a screenshot and the entire text below.
-- iMovieToGarageBandWorkflow
-- iMovieApp
-- Created by Greg Mullins on 11/18/05.
-- Copyright 2005 Apple Computer Inc. All rights reserved.
-- This is the first pass at sending GarageBand QuickTime based movie file of an iMovie project
--please don't localize anything below here....
-- send_garageband_imovieproject
-- main entry point for BeetleJuice to GarageBand workflow
on send_garageband_imovieproject(project_name, garageband_movie_path, is_garageband_running)
--display dialog "in send_garageband_imovieproject"
set projectName to project_name
set moviePath to garageband_movie_path
set          isGarageBandRunning to is_garageband_running
--display dialog "projectName: " & projectName
--display dialog "moviePath: " & moviePath
--display dialog "is_garageband_running: " & is_garageband_running
set userCanceledSaveReturnValue to "user canceled save"
--NOTE: we now expect GarageBand to be launched by the time we get here....
try
tell application "%@"
          activate
          --add ((moviePath as POSIX file) as alias)
          addmovie (moviePath as POSIX file)
end tell
on error
--display dialog "ERROR"
          return userCanceledSaveReturnValue
end try
end send_garageband_imovieproject

On the Mac, one thing that many folks don't know about is:
command-clicking on the document icon in the document's titlebar will display the path to the file. (This also works in Finder windows)
This will show you exactly where that file is on your hard drive. You can click on the file's enclosing folder in the pop-up to open it.
Also, there are possibly THREE Startupitems folders on your Mac:
YourHomeFolder/Library/Startupitems/
Macintosh HD/Library/Startupitems/
Macintosh HD/System/Library/Startupitems/
Anything in any of these folders will launch at system startup.

K8N Neo2 Odd behavior - Won't POST or reboot

I have been using this computer for years and recently sold it to a friend and now we're getting these odd problems. When the computer is first turned on, sometimes it won't power on (no fans or anything), however the power light flickers rapidly very dimly. After messing with it sometimes it will power on, but doesn't actually boot - just the fans and HDD come on. By pressing the power button on the front it will shut off and the power light will flash slowly (as though it was suspended). Pressing the power button again does not do anything.
After a lot of trial and error, I found that by holding in the power button while flipping the power switch in the back will cause the computer to turn on normally, but this is frustrating to do. Also, the computer won't reboot itself, it will get stuck in an infinite POST loop and requite to be turned off and then back on. It is not overclocked and I have reset the CMOS.

Oh dear looks like the Antec problems go back further than we thought.
bomax: I had very similar symptoms with a K8N Neo4 system recently. Check the main 20-pin power connector for pins which are pulling out of the plastic molding - seen that once on another system - and reseat it, but it's most likely the TruPower 380 that's gone bad - either the 5VSB or the power on latching is buggered.

Odd issue with hard drive renaming itself on reboot.

I have an odd problem I have no idea what is causing it. I have a mac pro and I have multiple hard drives internally and i also have two esata hard raid drives connected to the extra esata ports using the cable extender. Anyways, one of those drives renames itself on reboot, causing all kinds of problems when i then try to access files on it. For example, if I had a program that had its files stored there it wouldn't be able to find them when it went looking because the volume all of a sudden is "missing" but what happens is it will attach a 1 to the end of its name. Then when I reboot, it will remove the 1. On next reboot, it will repeat and so on. Any ideas as to what is causing this?

My guess is that there is something wrong with the connection between the computer and the drive. The commonest cause is backup software that is in the middle of backing up something when the connection to the backup drive is dropped, so that the backup software creates an actual folder inside the /Volumes folder with the name of the drive and does its backup to this folder. The result is that the next time the drive mounts it gets the "DriveName 1" designation, and a bunch of space on your startup drive has mysteriously disappeared. So I think what is happening is that you are intermittently losing the drive. Whether the problem is the cable, the connectors, or the drive itself, you could try experimenting to find out. Try swapping the cable for another, and if that doesn't work try plugging the cable into a different connector on the computer, and so on.
Francine
Francine
Schwieder

Odd terminal-gui error messages on intel that disappear with reboot

Occasionally I get error messages of the following form when running something from the command line that interacts with the GUI:
<pre>
zsh-% mate aliases
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
zsh-% gdirs
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
</pre>
This appears to be harmless (what I am doing still works), and disappears upon reboot, but it seems to indicate some kernel communication problem.
(The first of these is TextMate's command line utility, and the second is a gui that displays directories in a stack that Wataru and I made with Pashua, so I doubt it is specific to any particular app. Both are universal binaries.)
Any idea what is going on?

?
Programmatically Detecting a Translated Application

Odd: iMac Chime repeating after rebooting in Bootcamp

So If I just restart the computer normally while in OSX, nothing odd happens, One chime, Boots quickly into OSX. If I boot from OSX into Bootcamp, Same - One Chime, boots up quickly.
However, if I boot FROM Windows into OSX the Chime usually repeats 5-8 times before booting into OSX. Just last night however, Instead of repeating a couple times, The chime repeated continuously until I turned the computer off a couple minutes later. When I turned the computer back on, nothing happened, the keyboard and mouse did not work and no chime was sounded. I let it run for a while and nothing happened so I shut the computer down for the night. In the morning, the computer booted up with one chime and normally... Any idea wth is going on?

HI and Welcome to Apple Discussions...
Boot from your Mac install disc, run Disk Utility to see if there are errors on the startup disk.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
Carolyn

Finder-odd behavior, why is it rebooting??

For the last few days, the Finder is behaving badly. Whether I have five applications open or none, the desktop icons--including three external hardrives and any iPods connected at that moment--will disappear and then reappear a few moments later. If this happens while I am working in another application (like right now typing this message in Safari), when the desktop icons come back, the Finder is the topmost application.
Any ideas on what might be causing this and possible resolutions? It was happening before the latest security update and I have restarted the machine three times since to no avail.
Thanks
PowerPC 2.1 GHz
10.4.11

Check for incompatible third party applications.
[One person reports success|http://discussions.apple.com/message.jspa?messageID=8969672#8969672] with installing the latest version of Stuffit upgrade (13.0.3)
[If using Stuffit, check this one first|http://discussions.apple.com/message.jspa?messageID=8884712#8884712]
[Finder crashes associated with using Stuffit|http://discussions.apple.com/thread.jspa?threadID=1873700&tstart=0]
[Finder crashing/looping/closing folders (Stuffit issue)|http://discussions.apple.com/thread.jspa?threadID=1882285&tstart=0]
[Finder crashes associated with using Afloat|http://discussions.apple.com/message.jspa?messageID=8852780#8852780]
[Quicktime 7.6 update issues with 3rd party software|http://www.macfixit.com/article.php?story=20090121223437550]

TS1702 My iphone 4 freezes and reboots an odd time is this normal?

Is it normal to freeze sometimes and go off? It only 3weeks old.... And it heats up a lot on charge, not major hot but hot

See if this helps:
http://forums.wireless.att.com/t5/Apple-Community-Discussion/iPhone-4-heats-up-w hen-charging/td-p/1995189

IPhone lock-up, crash & rebooting issues?

Hi, All – I have the original iPhone with 2.0 software. Since the initial install and even after doing a restore on it, the phone has been crashing and rebooting intermittently. I am using AT&T service, and I have never attempted to unlock the phone or run arbitrary code on it, so these issues are baffling to me. Below is a brief list of what I’ve encountered. Again, the iPhone is crashing and rebooting, not the apps:
Press the “Home” button = intermittent crash, then reboot (might happen back to back, or as infrequently as 6 hours – no rhyme or reason)
Press the “Power” button = (same result as above)
Phone locked up when receiving a call, lit up & identified the caller, no ring or vibration then it rebooted. This has happened twice.
Phone locked up when receiving a text message. Noticed it as I heard an odd tone from my phone for a split second, then it crashed and rebooted and showed a text message on the home screen when it finished rebooting.
Also, I have had other problems where the phone didn’t crash or reboot – it just didn’t perform properly:
When receiving a call – display does not light; phone does not ring or buzz. Voicemail received from caller though call not noted in received calls list. Also, I have had a greater number of “Call Failed” problems, even with full cell signal in Denver, CO. This may be AT&T’s fault, but it seems fine after I shut down and restart the phone.
In general, my iPhone with 2.0 software seems a bit more laggy. Screen rotation from portrait to landscape isn’t as smooth and opening the SMS app seems to have a consistent 2-second delay regardless of if I have cleared out my text message logs or not.
Also, when I reboot the phone, more often than not it starts off at the “slide to unlock” screen instead of the home screen.
Regarding location services – My gripe is that it can’t be told to either:
Stay on all the time
Shut off all the time
Activate when needed, then shut off – just like in 1.1.4.
Now when I use an application that I allow to use location services, I have to manually go and shut location services off again or my battery life will suffer.
I have now removed all of the new applications from the phone, and am still experiencing crash/reboot problems. My guess is my phone is damaged somehow or the software I downloaded was somehow flawed during downloading or installation.
Does anyone have any ideas? I really like this phone, but I can't bring myself to buy the new 3G if I can't be certain I wouldn't have the same problems
Thank you,
Lynn

I have experienced this problem as well and it is intermittent to say the least. I have two other friends that have an i-phone as well, and when the phone crashed it stored a picture of the screen in the photo library of the phone. I thought that was a little odd as well. I have another friend that has not updated to 2.0 yet and does not seem to be having any problems at all. I would venture to guess that there is a problem with the update and that an update will be out sometime to correct the problem. If anyone knows of a way to correct the problem please post a fix for us.

Iphone battery draining fast after reboot

hi, my iphone battery drains completely from 100% to 0% in a few hours if I switch the phone off and turn back on. i recently found this out once after I switched off the phone.....But there is no problem (battery can last 1~2 days for normal use)if i do NOT switch off after recharge.
Is this a software issue or hardware?? Has anyone got the same problem? Thank you so much.

HeffRaleigh wrote:
A couple more diagnostic tidbits.....my iPhone exhibited odd behavior after downloading the Star Gazer app from the App Store on Sunday. I activated the "arrange icon" feature to move the app icon for Star Gazer to a new position on my iPhone and after I moved it the icon for the app next to it (Weather Channel App) was absent but the label was present. When I slid my app screen back to the home screen and came back, the Weather Channel App icon was visible and the Star Gazer app was now absent but the label was present. I've also had some odd flashes of the home screen after unlocking my phone (I have it secured with a PIN to protect my data). Is this and IOS 4.1 issue?
It is not an iOS 4 issue; it is a very rare problem, and has occurred with all versions. But if you search you will see reports are in the dozens, with 100 million phones in use that's a vanishingly small number. It usually means that memory in the phone is corrupted. If rebooting the phone doesn't fix it you should restore the phone using iTunes.

IPhone 5 Battery Indicator and Reboot issues

Hello Apple community forum,
I have an iPhone 5 that I purchased approximately 20 months ago. It has worked flawlessly and been well taken care of. Only until recently, maybe 3 weeks after I updated to IOS update 7.1.1, I have been having a plethora of issues and now the phone is virtual useless. I have not jailbroken it or have had any third party hardware installed. It all started when I plugged in my Apple lightening cable for charging and an error appeared "unsupported charging cable". From there I have experienced the following problems:
Battery indicator stuck while charging at any various percentage or during normal use and standby. Only a reboot will provide current charge status.
Extremely fast battery drain.
Unexpected reboots at various intervals or while accessing Apps or browsers. Sometimes very frequent. One day had at least 60 reboots. one right after the other.
Cannot turn on or off
Shuts off when I put it in my pocket.
BSOD (Blue Screen of Death)
Screen exhibits lines or odd characters shuts down or reboots.
Time and date at different positions post boot.
Log file full of errors. (Panaic.ips bug type 110 | awdd Wireless | ResetCounter bug type 115| TCCService bug type 167 | Log-Aggregated bug type 193)
The update worked great on the phone and it seemed faster and the battery lasted a bit longer than usual.However, now it is a different story. I was able to backup my phone and offload all my photos on its good day. I was reading the support site and following a few of these forums. I follow the soft and hard rest procedures and even restored the phone back to factory default (DFU mode). It does seem to run a bit better in default without many apps on it but it still exhibits all the above issues. I bit the bullet and went to the Apple store to talk to one of there G men. He acted surprised and gave me the Apple trained verbal run around. He ran the diagnostic and stated that my battery did not even register as being in the system. From there he opened the phone, inspected it for damage and re-attached the battery and taped it back down. BTW, they hosed my screen cover. Nothing is ever free. They did offer to replace my battery for $80 but did not feel that would solve this problem. If anyone has had this issue and did have a new battery installed, please let me know how that worked out.
I wonder if this latest update exposes some type of hardware flaw that was previously fixed or just a bug(s) in the software code. Yet, Apple does not seem to acknowledge there is a problem let alone advise to any upcoming fix. It does not seem that Apple really cares about my little bit of business. If anyone has any ideas or experience, please let me know. This is frustrating and owning too much of my time. Thanks Apple!

If tried techniques to get the battery to act right, such as rebooting by holding both the power and home buttons until the apple logo appears and it restarts, and those things haven't helped, take the iPhone and iPad to the Apple store genius bar and have the technicians test them to see if there is a hardware fault. Do that before the warranty runs out so you are covered.

Sound card works but not when rebooting

i followed all the steps...
alsaconf
alsamixer
/etc...noise.wav
alsactl store
edited the rc.conf
sound works but when i reboot, before the root i get the error... sound card not found?

check in rc.conf and see if your sound module isn't listed. Odd that it doesn't find your sound card on boot.
U may also need to run alsactl store as root. Permission problem, possibly?
sounds like alsaconfig is finding and loading the module each time u reboot, but its not being loaded because I think u need to run alsactl store as root, since it needs to be loaded by the kernel. That would require root privileges I would think. That's my best guess.
Last edited by jacko (2008-01-10 22:38:10)

3925 Reboot odd rebooted

Similar Messages

Maybe you are looking for