"3D' are added in HTML view sourse

Hi,
We are sending HTML attachments into email body from OSB 11g and it display successfully but in view the source of the email “3D” charcters are added to before of the attributes in HTML . Why “3D” coming and how to resolve.
Pls privde the pointers.
Regards
Venkata

Can you describe your E2E message flow? From where the attachment comes? How you pass it in mail body? What type of proxy and business service are you using?
Regards,
Anuj

Similar Messages

  • As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know each Java Class that is involved in flow.

    As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
    In short, i want to know the internal implementation of JSF Framework.

    As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
    In short, i want to know the internal implementation of JSF Framework.

  • I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

    I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

    Have you rebooted your home router?

  • Adding custom buttons to crystal reports html viewer

    Hello,
    I'm using crystal reports for eclipse and I have a time chart in my report that is displayed with html viewer. I need a button bar to navigate on this chart e.g. the button which adds values to chart for the next month.
    Is it possible to add custom buttons to the button bar of crystal reports viewer ?
    Thanks in advance.
    Greetings,
    Nikolas

    Dear Shashidhar,
    regarding your request I have to inform you that the ECL Viewer is developed by a third-party vendor company and so from SAP point of view there is no chance to enlarge the buttons for redlining in the ECL Viewer.
    Best regards,
    Christoph

  • Inserting DIVs in HTML view screws Design view but preview is fine

    RH8 HTML
    Hi all,
    Ive been working on a fix for a client, forcing a footer banner to the bottom of the screen, regardless of content in the page. Its nearly working fine, just a bit more tweaking, but one problem I am having.
    I am editing and adding <div> in HTML view, so that the positioning works.
    However, when I view the page in Design view, its all messed up, the content is really narrow and stretches down the page for a long time. However, when I preview, and generate the page it looks fine.
    Its an issue, because the client will be given the RH source files at the end of the project, and with the front end editor looking like this its not going to be weasy for the to edit it, let alone me finish with all the content.
    Has anyone come across this before? Is the Design viewer not the best at displaying div content ?
    The HTML where the <div> is set off before content is entered:
    <body>
    <div id="wrap">
        <div id="main">
            <div id="spacing">
    ***********all content in here************
              </div>
        </div>
    </div>
    </body>
    The CSS that the <div> is calling
    #wrap {
        min-height: 100%;
        border-left: 1px solid #9ea6ad;
    #main {
        overflow: auto;
        padding-bottom: 54px;
    /* must be same height as the footer */
    #spacing {
        padding: 10px;
    #footer {
        position: relative;
        margin-top: -54px;
        height: 54px;
        background: url(footer.gif) repeat-X;
        clear: both;
        border-left: 1px solid #9ea6ad;
    /* negative value of footer height */
    #footer p {
        padding-top: 15px;
        padding-right: 10px;
        color: #ffffff;
        font-family: Arial, sans-serif;
        font-size: 10pt;
        text-align: right;
    /*Opera Fix*/body:before {
        content: ;
        height: 100%;
        float: left;
        width: 0;
        margin-top: -32767px;

    Hi Nick
    What you are doing is working outside the boundaries of what RoboHelp natively does. If working with DIVs was part of that you wouldn't be forced to create them in the HTML view. As a result, I'm not surprised that the Design view isn't totally understanding how to deal with it.
    No workaround I can think of here. Sorry about that. Maybe someone else has something to offer. What I'm posting to ask is that you please report this to Adobe as a bug. Who knows, maybe they have some magickal scripting or something they can do to accommodate it. At minimum, they need to be aware of the issue so they can factor it into a future release. Use the Feature Request link in my sig.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Character format changed when using html view

    Hi all,
    I have a form for book entering. There are fields for book name, an url adress of book and a html view to display this adress. Before adding html view to my form, there is no problem of entering fields. After adding html view, I can't enter some characters to this fields. Example I want to enter "yaz&#305;l&#305;m" but while writing this word, it appears like "yaz 1l 1m"  . If I delete html view, I can write correctly, reason is html view, but what is the solution? how can I correct it? can you please give an urgent response??

    you can see the runtime in this link : (look at the characters in field labeled as Yazar
    http://img228.imageshack.us/my.php?image=runtimehu1.jpg
    you can see the model in this link :
    http://img523.imageshack.us/my.php?image=modelsz5.jpg
    System info :
    com.sap.visualcomposer.vcbase.default      null (7.0007.20060316174020.0000)
    vc_client                                                      null (7.0007.20060316174020.0000)
    VisualComposerServerEar04                      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.mmcompiler      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.vcflex.default      null (7.0007.20060316174020.0000)
    com.sap.visualcomposer.portaladdons      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.portaladdons.BIKit      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.portaladdons.UWLKit      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.portalcontent      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.portalpermissions      null (7.0007.20060316173253.0000)
    com.sap.visualcomposer.vcfrwork.default      null (7.0007.20060316174020.0000)
    com.sap.visualcomposer.vckitbi.default      null (7.0007.20060316174020.0000)
    com.sap.visualcomposer.vckitgp.default      null (7.0007.20060316174020.0000)
    com.sap.visualcomposer.vckitxx.default      null (7.0007.20060316174020.0000)
    com.sap.visualcomposer.wdext.default      null (883791)

  • Report shows up in HTML view but blank in PDF view

    Hey
    I have a quick question .
    My report runs fine and shows in HTML view .
    When I click on PDF view it shows up blank and doesnot even show any header footer company logo .
    Any idea/advice ?
    Thanx
    Edited by: pooja... on Oct 14, 2008 8:41 AM

    Hi Pooja,
    It seems u have succeeded in getting your report on HTML. This is with Interactive Reporting.
    In the Dashboard section i have an Embedded Browser with the url set in the properties that returns the xml response. But then we are unable to read or view it. Can you help me with that as i am new to this.
    Thnks & appreciate your help.
    JB
    Edited by: user10454571 on Oct 21, 2008 9:31 AM

  • How do I show what folders files are in in list view? MacGenius NO help.

    I recently went to the Natick Mall Mac Store to see a MacGenuis. I had two issues. The first was whether it is possible to view what files my documents and photos are in in list view, as I used to be able to view on my PC. The MacGenius tried to sell me a one-on-one lesson. When I asked how a lesson would help if it was not a possiblity, he told me to right click each document or photo to get that information. That is exactly the cumbersome, time consuming an inefficient process I was trying to avoid. I asked if he was aware of any third party software that could provide that function, and he said no.
    A little more research on my own shows that if you put your cursor on the item, the information shows up in the bar at the bottom of the finder screen. Not exactly what I was hoping for, but certainly more efficient and quicker than right clicking on each individual item, and I can at least toggle back and forth to compare documents and photos in multiple locations so I can delete those no longer needed without having to worry about doing an extra step and moving docs in and out of individual folders to re-consolidate them and delete uneccessary copies. (I have extras because I do legal work and have to keep copies of all items submitted in a single court filing together, but may need the same photos or docs in other court filings, which also have their own folders so I have a complete set of what was filed in each filing).
    Shouldn't the MacGenius have known about this function as an option for finding folders? He also told me I could not back up my computer on a disk I had previously used for a back up because the new back up would wipe out everything previously backed up.
    I also asked him about the whirling colored circle which I seem to be getting a lot of lately. He "checked" my computer and determined that I need a new battery (mine had slightly over 450 cycles, according to him) and my hard drive is failing. All could be repaired for a little over $300. I was told I could not do the repair myself, it had to be done by a Mac technician, and that the parts could only be purchased at the Mac store and they don't sell the parts except to Mac technicians.
    I was dubious, only because the MacGenius was consistently unhelpful and consistently tried to sell me items. I did stop and look at some PCs, figuring if my Mac was on its way out I would back up my docs and photos to a new PC and save a ton of time and money because I could consolidate on the PC which would show what folders my docs and photos were in - and use the PC for a backup drive until the Mac dies.
    I got Tech Tool Pro 6 and ran the diagnostics. All of which contradicted what the MacGenius told me, and gives me multiple options for backups without having to buy multiple backup drives for fear of having prior backups overwritten. So I don't need a new computer, I have an acceptable, altho less than desirable, way of telling what folders my items are in, and Tech Tool's optimization fixed the whirling "wait" cirle. 
    The only thing left is to ask if anyone has a hint or knows of software available that will in list (or other) view what folders my docs are in.
    Except to ask, has anyone else experienced such disappointing help and annoying upsell from a MacGenius? In all fairness, the few times in the past that I have been helped by a MacGenius, they were extremely helpful and didn't try to sell me anything (altho my computer was new and still under warranty).

    Customize the Finder window toolbar, adding the Path icon to it. Select an item and click on the Path icon or, as you already know, add path to the window. There's also copypath.app available via the App Store.

  • PCUI - open New Window via Button (to call custom URL / HTML viewer)

    Hello group,
    I have followed the "Use CRM PCUI HTML viewer to call a custom URL" in order to create a custom URL to BW web template.
    However, instead of displaying the URL in a tab (this works fine), I want a Button in the Accounts view to open up a New Window displaying the URL there.
    Here is what I have done:
    Create Field Group & Structure
    Create Event
    - Usage: Layout-Relevant
    - Text: Web template call
    Added Event to Toolbar Group ACC_OIC
    Define Application Layout (CRMM_ACCOUNT) for Event
    - Position: New Window
    - Screen Element Type: HTML
    - my field group
    - my structure
    Define Application Set (COMM_BUPA)
    - my structure
    - my access class
    The button is there, when clicked the read-method of my access class is executed, but no New Window is opened with the URL displayed.
    Is there something I am missing? Can the HTML viewer not called in a new window?!
    I appreciate any input you can provide me.
    Thanks and regards,
    Erik

    I have the same problem. PCUI toolbar button open url http://www.google.com in new window   .
    It sames so easy open a link on web page.
    why so hard in PCUI !
    My god , who design the PCUI.
    anyone solve this problem , let me know please. Thanks!
    [email protected]

  • Problem with HTML viewer

    Dear All ,
    I am facing a problem with HTML Viewer . My senario is as follows :
    1. I have created one HTML page . On that page there are 4 Images
    2. I imported that HTML page in SAP with the help of transaction SMW0
    3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
    4. This is happening perfectly ok on the machine on which all this developement was done.
    But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
    Can you please guide me how to remove that machine dependancy?
    Regards,
    Nikhil

    Hi Nikhil,
    Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
    Regards
    Abhii...

  • The internal html viewer is not working in coldfusion builder 2.

    It is so frustrating how hard this is. I finished setting up coldfusion and coldfusion builder 2 with an apache local webserver and was hoping to make use of the internal html viewer but it won't come on! All I see is a blank grey page with no content. After creeping around the forums for a while it seemed that the simplest solution was to use the internal coldfusion server so I uninstalled everything and did just that, reverting my administrator page to http://localhost:8500/CFIDE/administrator/index.cfm (working and launchable from the IDE), placing my webroot at C:\ColdFusion9\wwwroot and with all the folders in their right place. The server is running ok and when I launch the run as "coldfusion administrator" option to run my index file, it succesfully opens the external browser and displays the page.
    I have the same setup on my desktop at home, the same files, installation, everything! and it works but not on my laptop. I followed Ben Forta's instructions to a T and yet I still am not getting the html preview. I even tried to hard code the absolute url in the html preview settings and still nothing but that annoying grey.
    Is this a bug? There doesn't seem to be anything about it in the bug reports. It is quite infuriating how something that seems so miniscule could be such an annoyance. I have already gotten quite used to the preview pages and coldfusion and I would prefer to code that way rather than making use of dreamweaver which I feel I am being forced to use, but at least it's consistent.
    Please if anyone could provide some answers and help I would really appreciate it! I have only so much hair left!
    Thanks!

    Perhaps others may recognize and resolve this for you. I and others here often can and do offer quick solutions to many problems. And I can appreciate that it’s reasonable to think that something so simple should just work. But in this case I think are simply too many variables that could explain why things are not working for you. And while I can also appreciate that you will prefer to get a solution for free if anyone can offer it, I just can’t even begin to offer all the possible problems and solutions, at least by email, in this case. Again, maybe someone else will make a quick connection.
    But I will point out that if you’re willing to pay US$75, I offer a service of remotely troubleshooting any one CFBuilder problem for that fixed price. Hopefully I might help you solve it quickly (when I can see exactly what’s going on in your environment), but you will not pay if I don’t solve the problem in up to 2 hours effort. If you may be interested, see www.carehart.org/consulting/ for more, and if you want to set up a time to get together (over the web), drop me an email at [email protected]
    Finally, please note that I don’t often point out this service here on the forums. I generally just offer suggestions (sometimes lengthy ones) without any commercial expectation, so please don’t regard this as me engaging in “abusive unsolicited commercial email”. I’m just offering a possible solution, given the OPs sincere challenge in solving things.
    /charlie

  • Export in Query Ready mode not Working.for FR reports in HTML view

    Hi,
    When we run the FR reports in HTML view in Workspace,there is an option at the bottom to "Export in Query Ready mode",it's not exporting the report in Smart view excel .
    But some of our users are able to export the report in SV.We are using EPM 11.1.1.3. I have checked the IE 7 settings with other users and it's same.
    Does anybody has any idea what could be the cause?
    Thanks in advance.
    BC

    It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Html view is not visible

    Hi Guys
    i am calling a webtemplate from vc by using html view
    but the contents of html view is not visible in the application but html view window is opening but blank screen when i am trying this link direct in internet explorer its opening even www.google.com is not working from the application.
    after changing my compiler to flex2 compiler i am getting this problem
    Regards
    Amiya

    Hi Govindu
    Thanks
    actualy i am using some guard condition in my html view if i am removing it then its displaying
    in flex2 compiler and some custom drop down events also working strangely in flex2 which is working properly in flash  its realy strange
    can u please explain what are all fixes we can do in order to solve this issue we have also raised oss message regarding this
    Regards
    Amiya

  • When I open an email, instead of clicking on the button 'html view mode', how do I set it permanently so I won't have to click on it each time?

    How do I keep html view mode on in email, instead of clicking on it each time?

    Hi linktogen,
    In order to test this, can you please provide the webmail you are using for further testing?
    Thank you!

  • HT201774 How do I delete excess email messages from my iPhone.  There are 300 messages listed, and every time I delete some, more are added from old messages.  How do I limit the number of messages that can appear on my phone?  How can I delete messages i

    How do I delete excess email messages from my iPhone.  There are 300 messages listed, and every time I delete some, more are added from old messages.  How do I limit the number of messages that can appear on my phone?  How can I delete messages in bulk,

    You can't.
    All photos transferred from your computer are stored in the Photo Library. The photos in the album or albums below are not duplicates - they include a pointer to the original photos stored in the Photo Library. This way you can view the photos in a particular album only by selecting the album, or you can view all photos available in all albums by selecting Photo Library.
    Just as with an iTunes playlist. A song cannot be in an iTunes playlist unless the song is in the main iTunes library. Placing a song in a playlist does not duplicate the song. Remove the main iTunes library or the songs from the main iTunes library that are in a playlist and the songs will no longer be in the playlist either. This way you can listen to the songs in the playlist only by selecting the playlist, or all songs in your entire iTunes library by selecting Music under Library in the iTunes source list.
    The same with iPhoto on a Mac. A photo cannot be in an in iPhoto Event or Album unless the photo is in the main iPhoto library. Placing a photo in an Event or Album does not duplicate the photo. This way you can view the photos in an iPhoto Event or Album only by selecting the Event or Album, or all photos in all Events or Albums.

Maybe you are looking for