3d bar graph in 8.6

Does anyone know is it possible to plot a 3d bar graph in LabView 8.6?
I need the bar graph rather than the surface plot as I don't want any interpolation between points.
At the moment the closest I can get is using the surface graph plotting points as large solid cubes, but this is almost impossible to read and very ugly.
If I could get it to fill in below the cubes it would be perfect.
It seems like there should be a bar graph available, its a fairly standard format.
Thanks for any help,
Darragh

See this example

Similar Messages

Using the report generation toolkit, how do I make a bar graph verticle instead of horizontle?

The attached vi is similar to what I am using, and it produces an Excel bar chart. I would really like to create the same chart, only vertically instead of horizontly. I have tried all kinds of things that don't work. Is there a way to do this that does work. I want a result similar to rotating the produced chart 90 degrees CCW.
Thank you!
Attachments:
Chart Test.vi ‏20 KB

you want to use a xy-graph.
you can right click the plot legend to make a bar graph vertical.
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
bargraph2.jpg ‏91 KB

BO 4.0 webi: Conditional formatting on a bar graph

Hi,
Is it possible to fiormat a Bar graph conditionally in BO 4.0(SAP BO BI: web intelligence)..
I want to create a bar graph that displays bar in Green color if the value of bar is greater than target set and Red if it is less than target, which is not doable with BO xi3.1 version.
Please let me know if this can be doable with latest version of BO 4.0 webi.
Thanks in advance..

Hi Bharath,
One workaround in 3.1 I have found is to use a stacked bar chart and then create two variables out of the measure you want to be green if over a certain amount and make the formula:
=[Measure Object] Where([Measure Object] >= 10,000)
and the 2nd variable formula for red:
=[Measure Object] Where ([Measure Object] <10,000)
Then place these two measure variables on top of each other where the measure values go. Then go into the color palette and make a custom palette with the first two colors green and red see if that gives you what you are looking for.
Thanks

How to use a single variable in multiple schedules in bar graph

Hello Experts,
I am usiing a variable X in different schedules for creating a bar graph.This variable X is used in all schedules with different restrictions.For that reason I have to use X and follow some space after X to use it in another schedule. Is there any method to use X again base on schedule name? For example: If schedule1 then X where key=1000 and if schedule2 then X where key=2000.

Hi,
You can create a variable with the same name but use this in a small case...
All the Best,
Madhu....

Single Line and Stacked Bar Graph Representation

Data to be plotted on graph is as follows
Year and Month               Study               Planned Subject               Study-Site ID #               # Enrolled
2001 / 03          AMXN 9374               50     US-001               1
2001 / 04               AMXN 9374               50               FR-101               1
2001 / 04               AMXN 9374               50               SP-301               1
2001 / 04               AMXN 9374               50               US-001               2
2001 / 05               AMXN 9374               50               FR-101               1
2001 / 05               AMXN 9374               50               US-001               1
2001 / 06               AMXN 9374               50               FR-101               2
2001 / 06               AMXN 9374               50               SP-301               2
2001 / 06               AMXN 9374               50               US-001               1
I want to display the above data in line stacked bar graph format where the
#Enrolled will be in Stacked Bar by Study -Site ( Y axis)
Planned Subject should represent a single line at 50 ( Y axis)
Group by Year and Month ( X- Axis)
Study excluded ( Study will be selected from dashboard prompt)
I'm getting the stacked view of Study Site ID correctly but I want Single Line for Planned Subject .
Currently I'm getting multiple line .
Eg for 2001/03 I'm getting line at 50 in yellow colour
for 2001/04 I'm getting a line at 150 in different color since it has 3 Study-Site ID's But the desired output is Single Line at 50
As per 11g doc this is not possible because there is some upgradation in the nature of the graph
" Stacked line-bar graphs in which 2 or more measures are shown as lines on the same axis and are not stacked in 10g are stacked in 11g."
Refer - http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/apndx_ui_chngs.htm
Is there any workaround for it ?

Did you found any workaround for it ? I am too looking for same scenerio.

How to get bar graph in word in labwindow/CVI ?

how to get bar graph in word in labwindow/CVI ?

ashwinic9,
spawning your question over more and more threads (the present one, this one and this other one) won't give you a faster answer; instead, it will irritate forum users!
Especially if you have at your disposal a fast way to perform a test. I pointed you some days ago to word report example, that writes a table to a word document: did you tried changing the graph into a bar graph and generating the report? I have done it for you and the result is OK, as you can see in the attached document.
Now, since the example works well, there must be something in your particular situation that prevents the graph to be shown; that is: you must add some more data on your actual problem and maybe a small example that exposes the problem.
But please: keep active only this discussion and let the other threads die!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
wordreport.doc ‏38 KB

Creating a popup on mouse over in bar graph

Hi,
I want to create a popup using mouse over event on bar graph but I didn't find corresponding property in the property inspector. Is it possible to display a popup on mouse over in bar graph?
At present I am able to create a popup in the backing bean based on click event. I want to align it to the bar in the graph which was clicked. But now, it is being aligned to the bar graph as a whole(like above the graph , below the graph) when I use "RichPopup.PopupHints.HintTypes.HINT_ALIGN_ID, source". Is there a way to align it to the particular bar?
Any help is greatly appreciated
Thank you,
KK

Hi,
don't think you can align it to an area within a component. The align id property expects a component reference. Note that mouse over on a bar graph doesn't select the bar, which means that the data in the binding layer is not set to current (just in case that the data in the popup is meant to be dependent)
Frank

How to create static line in line bar graph in obiee 11g?

Hello,
I have requirement where user wants to see a line in bar graph.
Now the line is just static line, we dont have data field available to draw the line in graph.
is there a way to create a static line in chart and show it in Line bar ombo graph??
Thanks in advance..

e.g. i created the static line '10' in fx and now using this column as line in line bar report , but its not displaying the line at measure of '10' in chart.
Drag the column to measures section of graph (Line - Vertical Axis) to change this static value create an edit box prompt and pass the value to the column using Presentation Variable (as said by Fernando)
Thanks,
Saichand

How to plot bar graph in the real time?

Hi guys
I have n row and 3 column array, n will vary according the time, for example t=10ms, n=1;t=20ms, n=2;..., I would like to display all the data of the array in the bar graph in real time. I tryied with example "array to bar graph demo.vi" but very time, only one row was displayed.
Could anybody help me?
Many thanks.
Sorry I don't know how to capture the picture from VI, so I pasted it diagram to word document.
Attachments:
question.doc ‏240 KB

Where did you get this example. I can't find it listed in the current shipping examples.
Also, posting a small image of a section of a block diagram is not much to work with. You are using local variables and a sequence structure. Neither one is a good sign. If you would simply post the actual VI (and any subVIs), it would be much easier to see what you mean.

Command link at DVT Horizantal Bar Graph

Hi All,
I want to display command link in the place of y-axis in Horizantal Bar Graph.
I am using jdev 11.1.1.6 version
Please provide me suitable answer with proper sample code.
Thanks,
Sai

Hi,
the proper answewr is that you cannot have a command link in a graph. However, graphs respond to click events and you can define a click listener that then allows you to access the clicked on value.
http://www.jobinesh.com/2010/11/example-of-clicklistener-implementation.html
Frank

Using stored parameter from data control class with stacked bar-graph

Hi folks,
I'm relatively new to ADF & EJB so I want to apologise in advance if this question seems rudimentary to many of you.
Edit: I should have mentioned that I'm using JDeveloper 11.1.1.5
I'm having a hard time determining how to retrieve the value from a variable to be assigned to a property of the bar graph I'm trying to display on my JSF page.
I have tried to briefly summarise the logic below for reference.
I have a data control class (ActivityChart) that includes a method "getActivityDetail" returns a List of custom Objects (ActivityDTO) that are the underlying data for my bar graph.
public class ActivityChart {
    private Double axisScale;
    public ActivityChart() {
        super();
        axisScale = 0.0;
    public List<ActivityDTO> getActivityDetail(List<String> businessUnits) {
        List<ActivityDTO> returnNewList = new ArrayList<ActivityDTO>();
        List<TransactionDTO> dataList = new ArrayList<TransactionDTO>();
        TransactionSessionBean transBean = lookupTransactionSessionBean();
        if (businessUnits != null && !businessUnits.isEmpty()){
            dataList = transBean.getActivityData(SystemUtil.getCurrentUser(), businessUnits);
            returnNewList = processTransactions(dataList);
            axisScale = calcAxisScale(returnNewList);
        return returnNewList;
...The TransactionDTO object is basically a mirror of the entity object to store the fields from the queried db transactions.
The ActivityDTO object contains a String value (x-axis label) and 3 Double values for the values required for the bar graph.
What I'm trying to do is dynamically set the scale for the 2 y-axes (I'm using a dual-axis stacked bar graph) because the auto calculated values are not aligned.
Right now I've got the two relevant elements of the bar graph hard-coded with a specific axis value:
<dvt:y1Axis axisMaxAutoScaled="false" axisMaxValue="100.0"/>
<dvt:y2Axis axisMaxAutoScaled="false" axisMaxValue="100.0"/>.
The value I want to use for the Y-axis is calculated and stored in the "axisScale" variable in the above class.
Really at a loss of how to move forward from here.
Would very much appreciate any guidance/direction offered.
Thanks,
Karim
Edited by: 973742 on Nov 28, 2012 8:12 AM

Looks like I may have found the answer!
I had to set up the variable in the bindings for the page and then reference the variable from the binding and add the property inputValue.
ie. value="#{bindings.axisScale.inputValue}"

How to create a link to Bar Graph......?

Hi,
Can any body tell me how to create a link to a bar graph such that on clicking, it should navigate to specified page in the same application or different application.
I've written the following Region Source for creating link on Graph. Correct if it is wrong.
function onDynamicaBarGraphClick(e)
// Read point name
     name=e.data.Name;
// Read point value
     value=e.data.YValue;
// You can add onclick even here using the values name and value
link='f?p=&APP_ID.:4:'||:app_session||'::::::';
Thanks in Advance....
Regards,
Manoj
Edited by: user12873839 on Apr 12, 2010 12:11 AM

I have replied to you in another post. Help Needed : Changing the Color of Bar Graph Dynamically
Please don't open multiple posts for the same question. Thanks.
--Manish

How to catch click event on BAR or a BAR GRAPH???

Hello
I want to implemnt following things,
1. there is Bar Graph containing 10 Bars.
2. So i want to navigate to 10 diff. pages on click of each bar.
So how to catch click event on BAR or a BAR GRAPH.????

Hi,
You can set Destination URI on a graph. The URL can be specifically associated to a particular data point plotted in the graph.
Detail for the same is provided in OAF developer guide under 'Charts and Graphs' topic.
--Sushant

3D bar graph with time stamp on X-axis

Hi all....I try to plot date data (first column in array) to x axis in 3D bar graph follow by example in this link
http://forums.ni.com/t5/LabVIEW/3D-bar-graph-issues-using-2D-Y-Z-plane-and-timestamp/td-p/1923027
But I still do not succeed.
I'll be glad if you had any suggestions that could help.
Thank you
HiN
Attachments:
xy_bar_graph Version 0.vi ‏21 KB

Hi Jubchay,
Here is an example of displaying the given timestamp. Only the 3D vision has the customized marker.
The 3D Bar is not suitable to display a lot of bars, which make the marker overlapped. So I only input the subset of 15.
Attachments:
xy_bar_graph Version 1.vi ‏23 KB

3D bar graph: issues using 2D Y-Z plane and timestamp

Hi,
I'm having issues trying to plot a multiplot 3D bar graph using view towards Y-Z plane property (3D plot properties/View direction). This makes the 3D graph basically look like 2D. Bar graph looks quite ok when it is drawn without y vector (timestamp) but as soon as the timestamp is connected it doesn't make any sense. The bars are basically thin lines plotted to a very small area. Autoscaling or manual scaling doesn't help. Attached is a small example VI with some data which gives an idea what I'm trying to accomplish and what the issue is.
What I would like to achieve is to keep the bar width as in the case before y vector is connected to and have timestamps.
I'll be glad if you had any suggestions that could help.
Thanks,
Matti
Attachments:
3D Bar Plot_mod.vi ‏13 KB

Oooh. This is a bug for 3D Bar. The width and internal are not relative to the actual range. I filed CAR 344934.
If you could use 3D projection, you can use value pair (also from Properties or VI Server) as a temporary workaround. Value pair can override scale with any text. Here is an example.
Attachments:
3D Bar Plot_mod3.vi ‏16 KB

Bar graph legend problem

Hi I am using JDeveloper Studio Edition Version 11.1.1.3.0.
My problem is that I have made a bar graph inside an af:showDetailItem but the legends isn´t shown correct. I can´t see the legends at all when I place the legends in the bottom and if I place them in the right I can see half of the text. The source code is below. If someone can see something wrong in this code don´t hesitate to point it out or if someone know how to get this to work please let me know. To me it looks like a bug but I could be wrong.
<af:showDetailItem text="Søgulig gongd" id="sdi8"
stretchChildren="first">
<dvt:barGraph id="barGraph1"
value="#{bindings.TrxBrw360JLHistoryGraphRO1.graphModel}"
subType="BAR_VERT_STACK"
partialTriggers="::pc1:t1"
dynamicResize="DYNAMIC_SIZE">
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis/>
<dvt:legendArea automaticPlacement="AP_NEVER"
position="LAP_BOTTOM"/>
<dvt:o1Title id="o1Title1" text="Tíðarskeið"/>
<dvt:y1Title id="y1Title1" text="Upphædd"/>
</dvt:barGraph>
</af:showDetailItem>

Hi,
I stumpled accross this thread and fear I will hit the same problem with a new customer request.
Has a bug been filled for this?
Could not find anything relevant in metalink.
regards
Peter

3d bar graph in 8.6

Similar Messages

Maybe you are looking for