3D - controls are very sensitive - one small move of the mouse and the mesh moves too much
I have a complicated 3D document I have been working on for weeks. In the past couple of days, I've noticed that whenever I try to move a mesh, rotate the object, really make ANY movements at all, it is very touchy and sensitive. I can't make minor adjustments at all.
Look at the orange "screen" in the center. As you can see it needs to be slightly adjusted.
Now see where it moved. This was the smallest amount I could possibly move it for some reason.
So, I cannot seem to make any small adjustments and without being able to do that, this document I've been working on for weeks is worthless to me.
I've tried enlarging the size of the entire object but it makes no difference. btw the size of the image is 3000 pixels x 3000 pixels.
Thanks in advance for your help,
Kasey
Thank you, baby boomer... it is really helpful.... I need relax then call their supervisor.... thank you again, baby boomer, I appreciated your help.
^_-
Calm down, count to 10, get a glass, pour some Jack
Danials into it, get out a piece of paper & find a
pen.
Put your frustrations & dissatisfactions down on
paper to Holly & c.c. to her supervisor. Snail mail
the letter(s) to Apple's Canadian Office & maybe to
the Texas Office for good measure.
Telling them here is not the place. You are
violating the Terms of Use & this post *may be
deleted*.
Similar Messages
-
After an OS update, from the Mac Appstore my Air won't do anything.
I updated OSX from the appstore, and I restarted my laptop. Now I'm in the choose profile screen and nothing happends. At all. I can't move the mouse, the keys aren't responding etc.You should also ask this in the MacBook Air forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_air -
The mouse and the trackpad are obsolete, Capacitive touchscreen the way ?
My shoulders ache and my hand cramps all because of these 2 legacy devices.
The touch screen on the Ipad and on other devices like Nintendo DSI, Paceblade PaceBook, Even the humble hardworking automativ teller at Tescos all do the job in a more straightforward and accessible way.
Is it posible to use the new link that disp;ays the ipad screen on a big display 2 ways so that the scomputer monitor can display on the ipad and respond to touch screen commands from the ipad screen?I had to rush earlier, but what i have noticed is that cloud computing gives me exactly that functionality i want between the ipad and my desktop, so i know it can be done in that way through an app.
Is there an app that already does this? By this i mean links screen to touchscreen so touch screen can control the desktop, making a trackpad and mouse obsolete? -
2 of my movies are no longer working in my iTunes or on my iPod Touch, One doesn't play at all and the other gets to about 29:00 than stops working and I don't want to buy them again. Then also when I added a non-iTunes movie and tried to have iTunes make an iPod/IPhone version it gave me error -4. What's happening to my movies?
I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.
-
The toolbars and the bars of menus in Photoshop or Dreamweaver are very very small.
Hello,
I downloaded and installed Adobe CS6 yesterday and when I try to use Photoshop or Dreamweaver the toolbars and the bars of menus are very very small. It's absolutely unusable. What can I do ?
Thank you by advanceWhat can I do ?
Nothing. CS6 does not support high-DPI displays.
Mylenium -
One or More Credit Control Area assinged to one company code
HI Guys,
In credit management , the below said customizing is done by FI.
Financial Accounting Customizing
Financial Accounting  Accounts Receivable and Accounts Payable  Credit Management  Credit Control Account  Assign Permitted Control Areas to Company Code
Can any one explain why and for what purpose assign permitted control areas to company code.
Because one control area can be assigned to one company code. If not please clarify.
Regards,
SaiCredit Control Area
Definition
An organizational unit that represents the area where customer credit is awarded and monitored.
This organizational unit can either be a single or several company codes, if credit control is
performed across several company codes. One credit control area contains credit control
information for each customer.
Use
Credit and risk management takes place in the credit control area. According to your corporate
requirements, you can implement credit management that is centralized, decentralized, or
somewhere in between.
For example, if your credit management is centralized, you can define one credit control
area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you
can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level.
You set up credit control areas and other data related to credit management in Customizing for
Financial Accounting. For more information, see the Implementation Guide under Enterprise
Structure Definition or Assignment Financial Accounting and then Maintain credit control
area. You assign customers to specific credit control areas and specify the appropriate credit
limits in the customer master record. -
I have a macbook pro 17". I love the big screen, but how can I change the display? The content takes about half of the screen and the fonts are very small. I am sure it is an easy fix, so please clue me in. Thanks
Look at your >System Preferences>Displays
-
Photoshop General Discussion
Why has nobody suggested the "Blend If" solution yet?
- double-click on the layer thumbnail of the dragon line art
- Hold down <Alt> and drag the left half of the "This Layer" slider to the left, and the right slider as well, but not as much for a nicer blending.
Done. The only trouble is that you cannot add (for example) a color overlay effect to recolour the lines directly because this layer is not considered truly transparent by Photoshop (in Photoline this is not an issue luckily). In Photoshop's case you will have to merge it to a new layer, and only then does Photoshop treat the transparent pixels as "real" transparent ones. Some tips to do that can be found here: Create A Composite Layer | Planet Photoshop
Alternatively, convert the layer to a smart object, and you can apply layer effects and the like without issues. I would choose the latter option, since it is non-destructive.
This method, however, does not take the pre-multiplied edge pixels into account (which are multiplied with white), and thus you lose those pixels. This may be an undesired side effect, especially for more delicate art work. A better approach is to use an "unmultiply" effect.
In Photoline a non-destructive adjustment layer will allow us to do exactly this with any background colour, and with additional controls as well. Unfortunately, such a filter is unavailable in Photoshop. Luckily enough an action for Photoshop is available: http://www.ayatoweb.com/download/down04.html
- download the action (zip file) and load up the actions in Photoshop (I have no idea if this action still works in CC and above - I own a license of CS6 only).
- since this will unmultiply BLACK, you must first invert the artwork with <CTRL> <i>.
- run the action "unmultiply English".
- The black background is removed, and you now invert the artwork back to its original black.
Done! Notice how all of the original edge pixels remained unaffected. Those are now truly semi-transparent, and blend nicely with the background layer(s). A bit of a shame this is a destructive workflow, but the result is great. -
Why is Apple TV movie rentals to expensive?
I love my Apple TV, but I can go down the street and get 4 Movies at Redbox for the price of one rental on Apple TV.
Apple should reduce the price of movies rentals to $1.00!!!Forgive me if my solution to your problem is oversimplistic, but if the movies are too expensive for you, don't buy them.
-
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too -
I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks
No work around that I know of.
Apple Feedback http://www.apple.com/feedback/ -
The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag >< please fix it immediately
Hello alicelan,
After reviewing your post, I have located an article that can help with device errors. You may want to consider restoring your device to factory settings to resolve the issues you've described:
Use iTunes to restore your iOS device to factory settings
Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.
Learn more
If you get an error message, find out how to fix most update and restore errors.
If your iOS device with cellular service doesn’t activate after restoring, find out how to fix activation issues.
If your iOS device restarts repeatedly or isn’t responding, for example if you see a stopped progress bar or no progress bar, put the device into recovery mode and restore it again.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
i installed ios 7.after that my primary cam, one day it just stopped focusing and the pictures are blurry. If I switch it to the front camera it works well and looks like it should but when I turn it back it goes back to being out of focus and I can't figure out how to fix it?
This advice will sound like a joke or prank, but believe me it worked on my iPhone 5 and my daughter's. The lens mechanism got stock on each of our iPhones. We found a post on these message boards that said to hold the iPhone about 6 inches above a table or counter top and drop it so that it lands flat on it's back. Now try the camera ...Fixed! It has been more than six months now and neither of our iPhones have ever experienced the problem again.
-
i forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?
I'm not quite sure what you want - if you want an overview of all open windows, use the F key.. Otherwise please post back and be more specific.
Maybe you are looking for
-
Relation b/w Planned order and Production Order?
Hi, Can any body tell how to find the planned order for a production order? Regards, Sankar.
-
Help passing values to graphics
I am able to create some graphics in a stand-alone app, but I am having some difficulty passing values from one class to a sub class of JPanel. I can create a blank bar graph, the x and y axis, the title and labels, etc, but I need some values from a
-
I have been using entourage for quite some time now. Oddly enough I think it is the one program that microsoft makes better than apple. I just purchased a new macbook and i was thinking about making the switch to mac mail. any feelings one way or the
-
IPhone: Viewing an image that is longer than the normal view...
Hello all, What I'm trying to do is probably quite simple, but it seems to elude me: I created a 320x600 png file, and I want to simply display it on a simple view, on which the user would scroll down in order to see the bottom of the image. I tried
-
Reduce spacing between top navigation items.
My top navigation is a bit too wide for most screens. Is there a way, via CSS, to ever-so-slightly shrink the spacing between top navigation items? Thanks!