3D cube - composition faces not showing

Hello,
I have created a 3D cube with six faces, and I would like to have the same image composed for each face. I've set these up, but not all faces are showing on the cube. I'm not sure if there is a setting I don't have selected or what, but I'd appreciate any help I can get in getting this resolved. Also, any advice on the best way to animate the box (spin, etc.) would be helpful.
Thanks!
-Wade

Most important - you are looking at the front view. This view will not render. You should be looking at the Active Camera. Here are some other questions.
First, I do not know what is in your pre-comps. Second, Why did you create 6 pre-comps if you want the same image on all 6 faces? I'm also curious why the background layer is 3D. This may cause issues if you add a camera. It looks to me like the right face of the box is either missing or transparent. I also do not know why there is a notch in the apparent right face of the box. This is probably due to looking at your project using the Front View.
Adding a light to your comp would help define the edges. Showing us what is in the pre-comps would help. There's just not enough information in your screenshot to figure out what is going on.

Similar Messages

Faces not showing only photo view

I just started using aperture and all my faces show in the photo view then click on the faces button. when i click directly on the faces tab in the inspector/finder column only some of the faces show up.
Any help on getting all my faces to show up in both views?---thanks

while I was editing this post, the servers went into maintenance... I can't re-edit my previous. So.. let's try this again, now with pictures..
I think I understand the problem statement. Although not an aperture user myself, I see similar in iPhoto
On the corkpad, I only see
This is not as it should be, the key photo's assigned to a face should be displayed.
If I move my mouse slowly over each frame, I occasionally see a face move by. Moving your mouse across a rectangle should allow you to rifle through your photo's. Here.. all black, not even the assigned key photo appears.
Now we get to discover new faces from imported photo's. In this case I doubleclick on 'Carolien'
.. and we click on "Confirm Additional Faces"
We don't get to see all photo's, but a subset:
Look at the top richt of your screen. Notice that the focus is set on 'faces'
If I now switch to Photo's, then pictures where iPhoto suspects Carolien to be in are displayed.
I believe this setting is comparable to what apertureblues1 is refering to.
@apertureblue1 I believe this is not an aperture specific problem, since I experience the same in iPhoto. I don't have aperture on my system at all.
I don't recall since when this problem occurred. It was after a software update while running Lion.
Moved to Mountainlion since then, but the problem persists.
I'm running on a 2.66Ghz intel core2duo Imac, 8Gb 1067Mhz DDR3.
OSX 10.8
Iphoto '11 version 9.3.2 (670.63)
Bye,
Leo

Places and Faces not showing up on iPhone 4

I've tried everything to get places and faces to show up and i cannot figure it out.
My boyfriend has a 3GS with iLife '08 and he has faces and places.
How do I get mine to show up?

Have you used iPhoto to tag your photos with Face and Place information?
The Photos app on the iPhone will only recognize Face and Place information that you've tagged photos with in iPhoto.
Matt
Message was edited by: Matthew Morgan

Why are faces not showing up in shared photo streams?

I have just published several shared photo streams to iCloud, but all the face tags I've made don't seem to be showing up in the streams themselves. Are they there for others to see and I just can't see them? Or do others need to download the photos from the stream into their own iPhotos to be able to see tagged faces?
Thanks for any help in advance!

BSB-Fan, I think I might have found a solution to your problem. Simply follow the steps listed below.
Step One - Go to the homescreen and launch the Settings application.
Step Two - Go into the General section of the Settings app.
Step Three - Scroll down to the bottom of the General section of the Settings app. You should see a subsection that is labeled "Reset". Tap this.
Step Four - In the Reset subsection of the General section of the Settings app, you should see a button that says "Reset All Settings". Tap this, and then confirm that you would like to do this on the popup.
Step Five - After the phone has restarted, unlock the phone and return to the homescreen. Launch the Settings app again.
Step Six - In the Settings application, you should see a button that says "Notifications". Tap the Notifications button.
Step Seven - Once you're in the Notifications section of the Settings app, scroll down until you see a button with the Messages app icon and a lable that says "Messages." Tap it.
Step Eight - Make sure that the Show In Lockscreen is in the off position if you would not like your messages to show up on the lock screen, but only within Notification Center on the lockscreen. Make sure that the Notification settings for Messages are correct.
Now your Messages should show up in Notification Center on the lockscreen.
I hope I helped. If you have any other issues or concerns, feel free to reply.
Sincerely,
Austin

Most of the triggers in my composition are not showing there active state

I have a composition with 18 triggers.
Each trigger has a b/w image that should turn to a colour image when active or rolled over but only the two on the 3rd row work correctly.
The others do change when rolled over but when I roll off, even when still active they go back to their normal state.
Also when the composition plays through only the same two triggers will show the correct active state whilst active.
http://boastassociates08.businesscatalyst.com/projects.html
this happens in all methods of preview.
i have checked and all triggers have the correct images on each state.
Thanks

I figured it out. all trigger also have a link to another page on the site, all but two anyway.
so the triggers states are reacting as if it is just a link rather than it being a trigger in a composition.
does somebody know a way that will allow me to have the triggers states react the way i want and for the triggers to act as a link?

APO Cube data is not showing in Planning Book

Hi All,
Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I dont see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I dont see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and dont know much on APO.Present status i see the data in APO cube and not in Planning Book
Thank you
Arya
Edited by: karan s on Apr 3, 2008 8:58 PM
Edited by: karan s on Apr 3, 2008 8:59 PM

Hi karan
have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

FACES not showing on Iphone 6

FACES from my Mac do not appear in my iphone 6 PHOTO apps, why? It does in my iphone 4s with same settings

I haven't done a recent backup - any chance I can get them synced via iCloud? I've assumed this would happen since it's being constantly synced with everything else I've got running on iOS

Composite role not showing in Access request screen. (BRM not used)

Dear All
I have created a composite role in backend system with 2 single roles.
a. I have imported the single roles using the NWBC screen.
b. run the auth sync job.
c. imported the composite role as a techincal role using the NWBC import screen.
the import procedure was successfully completed.
But when i try to search for the role in Access request screen for a user - i can only see the single roles & not the composite roles?
Pls advise
Raju

Hi Raju,
In addition to Alessandro's valuable inputs, you need to be sure whether or not you were able to generate the composite roles (in NWBC).
The final stage of the composite role has to be in complete status.
Regards,
Ameet

Unnamed faces not showing in faces

When i look through my photos, there are some faces ( and other things) with unnamed below them, yet when I go to the faces tab, there are no faces showing there to be assigned names, just all of th ones I have already named?
Cheers
C

Updated to iPhone 11. No answer, marking question as answered to remove from my unresolved questions queue.

After Effects composition does not show in Premiere Pro

Hey guys. So, I'm having a problem with After Effects and Premiere Pro. I have a 64 bit Windows 7 PC and when I try to import my AE file into Premiere Pro, nothing happens. I even tried to import the file with the Dynamic Link option and still nothing happens. I tried looking all over the internet for the solution but i don't see it. Am I doing something wrong? Can someone help me please?

FAQ: What information should I provide when asking a question on this forum?

Not showing any partitions in the cube

Hi All
I created partition for the cube , im not seeing the partition in trgt cube
even its not showing source database and target database under the partition
I refreshed the partition
so how can i solve this , plz help on this
Thanks

Thanku rinku
I refreshed the partition but its not showing any thing
we have 4 partitions for 4 diff cubes;; for all the 4 partiotions this is the trgt(account) so i deleted 1 cube
form then on words its not showing any partitions in the trgt cube(Account) but remaining cubes under partition im able to see
for only trgt cube im not able to see
wat may be the problem?? plz help on this..
Edited by: user98631 on 23 oct. 2009 08:13
Edited by: user98631 on 23 oct. 2009 09:18

SSAS cube is not showing data

Hi All,
I have build a cube in ssas 2008. The cube processes successfully. but wheni browse the cube it does not show data.
I check it in dsv Fact table--> Explore data --> it displays data. But i cannot see the data when i browse the cube.
I have 3 cubes in one solution, there i also processed the complete solution. There is no problem with other cubes except for this one.
I have only dragged the measure and not the dimension. hence i do not think there can be any relationship issue.
Can anybody please suggest??
Thanks & Regards, Chaitali Thaker

Hi Chaitali,
Check if the CALCULATE; command is present in the Scripts/Calculations tab.
Ensure that you specify the relationship between dimensions and measure groups.
Set any related dimension UnknownMember properties to Visible.
thank you,
Radhakishan

Nested Composition isn't showing up correctly

I'm making a large animation as a project to bring my drawing, animation, and story telling skills together. Well I just got started, no more than 2 actual minutes of my short film and I've noticed one of my nested compositions is not showing up properly. I rendered out the part to see if it would display correctly then and it did not. All of my compositions are separate After Effects files in the same folder on my external hard drive. I bring each individual short composition into one (in this case Scene 1 composition) and that's where the issue occurs.
Right now I'm working with 3 compositions and 3 project files, Intro, Opening, and Scene 1. Scene 1 will contain Intro and Opening. When importing Intro and Opening to Scene 1, Opening does not show up correctly with one of the text animations being off. Looking at Opening in it's original project file it is correct. The text animation that shows up incorrectly came from a preset animation called Pulse Orange.ffx. The animation was slightly altered to give the desired effect (changed color and the rate of the pulse).
Here are two screen shots showing the exact same time of the clip, but one is a nested composition and the other is the original project file. The top one is how it should appear and the bottom one is the incorrect one. These are at the same time in both, just different project files.
After Effects CC 2014.1.1
Windows 7 Home Premium
No error messages appear
This is the first time this problem has occurred, and I've done this many times
If there is more information you need to know then just ask. I put what thought to be relevant, and I go back and forth between many computers so I can only put down information for the one I'm currently using (my windows 7). And yes this same thing happens between all the other computers I use, and not just this one. I've tried and recreated the Scene 1 file many times.

There is a stroke applied to it, that was part of the Pulse Orange.ffx preset animation that I tweaked to get that far.
Anyway I was able to fix it on another computer that also showed the animation incorrectly. And I have no idea what "UU" is.... But I was able to solve the problem after tinkering for a couple hours, thanks for your help anyway.

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Report does not show data , but data exists in the cube.

Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)

Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK.

3D cube - composition faces not showing

Similar Messages

Maybe you are looking for