3D environment greyed out

Hello
I had it working one time but now it's not. I am trying to change properties in the environment tab such as reflections & roughness but every time am unable to select those options, they are greyed out, i had it working one time but not sure how i did it.. any help would be appreciated

Hi Chris,
Is your problem similar to this thread? http://forums.adobe.com/message/4887935 It looks like switching from CMYK to RGB mode worked for this user.
Hope this helps!

Similar Messages

SCOM 2012 SP1 Test environment - "New View" is greyed out?

I'm new to SCOM....
I just created a SCOM 2012 SP1 test environment, but for some reason the "New View" button is greyed out. (I attached a screenshot)
I can't figure out why and it pretty frustrating. I'm assuming it is a permissions issue, but I can't figure out how to get this feature enabled.
any assitance is greatly appreciated.

Hi,
The "New View" is greyed out if you try to create a new View in a sealed Management Pack.
You can create a new View only in unsealed Management Pack's inside the console.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch

All options are greyed out after i Click on Apply Maitenance

Hi All,
I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
Kindly help me out.
Find the screenshots at my blog.
http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
Regards,
AS

From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
Are you definitely sure the environment has had nothing applied to it.
Cheers
John
http://john-goodwin.blogspot.com/

SSRS Parameter Drop downs are greyed out after changes to SSAS cube

Hi
I am facing a weird problem. I have 3 SSRS reports that are based on an SSAS cube. Few days back I deployed some changes to cube and everything works ok on dev environment. When I deployed the same changes to production, SSRS reports don't work. I don’t
get any error or anything when I click open the report but all the parameter boxes are greyed out. If I restore SSAS database from dev to production then SSRS reports work fine and I can select parameter drop downs. What could possibly wrong here. I have no
idea to what to troubleshoot here.
Thanks
Nik

Hi Nik,
Are you using render the report from a report snapshot? In contrast with reports that run on demand, it is not possible to specify a different parameter value for a report snapshot when the report is open. So the parameter textbox is grayed out. If the users
want to view the report with different parameter, we can select “Always run this report with the most recent data” option in “Processing Options properties” page.
Besides, if the issue is not in this scenario, we can try to edit the report with Report Builder to check whether the report is ok. Such as delete the parameters, then recreate them to check again.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Upon opening a new window, Firefox 9.0.1 gives me a "Go to a website" message in the location bar, regardless of what site I'm at and doesn't display the URL I am looking at, and the stop/reload button is greyed out. Is there a way to fix this?

I am running Firefox 9.0.1 in a windows 7 environment. This is a problem that I had with Firefox 8, as well, though it was only when I opened my home page, not any new window.
I prefer new window viewing to tabbed viewing and when I click a link to and a new browser window opens, all of my basic control buttons (forward, backward, stop/reload) are greyed out except home.

Hi,
An extension could be causing the issue. Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Windows Deployment Service. Network Profile Radio Buttons greyed out with R2

Hi All
I have downloaded and setup Server 2008 R2 (not yet activated). I have added the following roles "DHCP Server", "DNS Server", "Active Directory Domain Services" and "Windows Deployment Services". I can PXE boot a test client machine and (using the boot.win from windows 7 dvd) multicast a XP Image to it. This setup is connected via a 100 Mb switch and is an isolated network.
Under windows deployment services - if I right click my server - select properties - network tab "Network Profile is greyed out". I have tried running wdsutil /Set-TransportServer /Server:big /Profile:100Mbps but get the following error message: "Windows Deployment Services Management Utility Version 6.1.7600.16385. Error code 0xC110011F This WDS transport server does not support network profiles.
I have tried this on two hardware setups:
An Intel D915GUX 3GHz 2GB RAM and Marvel Yukon 88E8050 ethernet controller.
An Intel D965 Core2Duo 1.86GHz 2GB RAM and Intel 82566DM Network controller.
Incidently I have done the same setup with Server 2008 (not R2) on the D965 and the Network Profile radio buttons are not greyed out. If I upgrade the same test machine to server 2008 R2 the Network Profile radio buttons are greyed out. Is this a design change, does Server 2008 R2 no longer support network profiles as I am now unable to select 10 100 or 1000 Mbs ?
If more information is required or if anything needs further detail please let me know.
Thanks for any help.
Liam.D

Is there any way at all to manually set or control the network profile? In my environment, a SCCM\WDS multicast stream is bottoming out on speed and network utilization when the stream crosses a Nexus 7009 router. Speeds go from 200 Mbps to 20 mbps. I have
a theory that this "new" automatic configuration is placing the clients in a slow network profile that are on the opposite side of the router and I have been unable to find a way to speed of the transmission. I have also ruled out the "master
client" slowing down the stream buy using different clients only connecting to a stream 1 at a time. I have also ruled out the router as the source of the problem by having a VLC client listen to the multicast stream on the same side of the router as
the slow clients. The VLC client (unknown to SCCM\WDS) was able to receive the transmissions at 20 % utilization / 200 Mbps.
-Tony

Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

Hi Gurus,
We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
Issue:
When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
We have tried the following:
1. We updated the HSS_COMPONENT_PROPERTY_VALUE table and updated the PROPERTY_NAME "isCompact" to false.
2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
Thanks in advance.

As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
Hyperion Planning - Version 11.1.2.2.300 and later
Information in this document applies to any platform.
Goal
The scenario:
EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
The administrator went ahead and redeployed the application servers individually into their own JVM.
However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
The aim:
It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
Solution
Caution:
Make sure that you take a backup of the following:
- TheFoundation Services database schema backup
- Take a backup of the following folders:
\Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
Disclaimer:
This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
Use at your own discretion.
Procedure:
1- Run the epmsys_registry to generate the Registry report
2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
i.e:
Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
                run the command:
                 epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                Repeat this command for each ObjectID that has its applicationServerDeployment
                 property set to Configured
4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
Take note of the first ObjectID entry in the section header: for example
WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Start a command prompt and set the working directory to
                 \Oracle\Middleware\user_projects\epmsystem1\bin
- run the command:
                 epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
-Note the Parents ID in the output:
For example:
Parent 1
NAME - WORKSPACE_LWA
ID - e4b3a86a82c26941S32ef81a1455fe48473S7bd0
TYPE - LOGICAL_WEB_APP
Parent 2
NAME - HOST:BACHVMPS3TR
ID - e4b3a86a82c26941S32ef81a1455fe48473S7ffe
TYPE - HOST
- Note the single child ID:
For Example:
Child 1
NAME - WebLogic 10
ID - e4b3a86a82c26941S32ef81a1455fe48473S7fd6
TYPE - APP_SERVER
Now run the following command to remove the Link between Parent and child:
epmsys_registry removelink #parentObjectID #childObjectID
In this example that would translate to:
To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
#e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
epmsys_registry deletecomponent #parentObjectID
In this example:
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
- Delete also the Parent representing the WORKSPACE_LWA
epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
Note:So we have now deleted the WEBAPP and LWA for workspace.
6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
7- Start the Weblogic admin console and login
Then go to the left panel and Expand Environment -> Server
Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
Activate Changes and Log off
8- Stop the weblogic admin console server
9- Go to the following location and delete the folder EPMServer0:
\Oracle\Middleware\user_projects\domains\EPMSystem\servers
Delete also EPMServer0 from the following location:
\Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
Run the following command: sc delete HyS9EPMServer_FOUNDATION1
11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
15- Start the services and test the workspace

NWBC - hiding/greying out buttons and OBN errors

Hi,
I'm working with Environment, Health & Safety via NWBC, but having great trouble influencing the NWBC screens.
I am backend security proficient enough, however I cannot seems to figure out how the buttons on the NWBC side are controlled,
hidden or greyed out. They don't always match with the ACTVT fields that you have in your backend authorization roles.
Things such as Work Centres, the left side-panel/navigation menu I can control, that is not too difficult. What I want to know
is why sometimes buttons are greyed out in certain forms or screens and how I can authorization trace that. Almost nothing of
what is going on in NWBC or in dynamically created POWL screens leave any traces on SU53 authorization error reports.
Who has some good pointers on how to get more grip on NWBC behavior of mostly
- buttons (hiding, greying out)
- how to find the correct missing services
and
- other OBN errors ?

Usually it is the application specific POWL feeders which define what actions are available. POWL will automatically disable buttons where the action isn't listed as support. In other words this is a application specific problem, not a NWBC one.

Essbase administration service. The SQL data access source is greyed out

Env: EAS 11g Oracle 10g database
Hi,
After i tried to install EAS and try to create a rule file, I find out that I am unable to select the datasource from "SQL data sources" field, which has been greyed out. However, I am able to make the connection in another environment that use the same settings. This is a replica of the system.
1) Is there something with the connection. If yes, what file(s) I need to check and any other things that I need to check. It could be something with the jdbc.ini file perhaps. But when I try to check this ini file, it appears the same with the one that works in the other environment
kindly need your help
Rgds,
Raymond

To configure data sources on UNIX:
1.Open the $EPM_ORACLE_HOME/common/ODBC/Merant/x.x/odbc.ini file and add a data source description.
2.Copy the $EPM_ORACLE_HOME/common/ODBC/Merant/x.x/odbc.ini to $ESSBASEPATH/bin/.odbc.ini.
3.Create a symbolic link to the $ESSBASEPATH/bin/.odbc.ini from the UNIX user home directory:
ln -s $EPM_ORACLE_HOME/common/ODBC/Merant/x.x/odbc.ini /home/myfolder/.odbc.ini
4.Verify that the odbc.ini file in the user home directory matches the odbc.ini file in EPM_ORACLE_HOME/common/ODBC/Merant/x.x.
If the files do not match, repeat step1 through step3
The ODBC-64 folder is used when the Linux is a 64 bit.
Check if these are the steps you followed to create the Data Source.
The connection to the DSN created can be checked by below steps in Unix..
[essdev@dshypdev bin]$ pwd
essdev/hyperion/products/Essbase/eis/server/bin
[essdev@dshypdev bin]$ ./odbcconfig
Using the following Environment...
Env HYPERION_HOME=/essdev/hyperion
Env TDODBC=. (for Teradata only)
odbc.ini file name=/essdev/hyperion/common/ODBC-64/Merant/5.2/odbc.ini
Database Driver Names:
Db2=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARdb221.so
Oracle=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARora21.so
Sybase=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARase21.so
Informix=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARifcl21.so
Teradata=./drivers/tdata.so
SQL Server=/essdev/hyperion/common/ODBC/Merant/5.1/lib/ARmsss21.so
ODBC.ini Configuring Utility
1. List
2. Add
3. Delete
4. Test
5. Exit
Select option 4 to test the connection

CProjects object link greyed out in DMS

Hi Everyone,
We have cProjects 4.5 setup in our environment.The RFC connections to SAP DMS have been established. DIR's of all 'Document Types' can be assigned to a project successfully.
Now,in DMS, for a DIR XYZ,'cProjects Elements' object link has been established.However, when we attempt to add a Element in cProject Elements, the netire section gets greyed out and a message is displayed as follows.
" Object link to DPR_OBJLNK cannot be changed in this transaction,Message no. 26321 ". Its understood that linking cannot be performed from CV0*n transactions. In that case,from where would this feature be enabled?
Regards,
Pradeepkumar Haragoldavar

Hi.
we have the same problem.
SAP ECC 6.0 on client 300, cProject on client 400, RFC connection established.
From cProject we can link DMS documents to tasks.
But, in DMS we can't see the link to the cProject task (object DPR_OBJLNK).
Is it possibile to see cProject tasks linked from the DMS documents ?
Is it possible to link cProject tasks directly from DMS documents ?
Thanks.

Click-To-Call AddIn with Citrix are greyed out

Hello,
we use the Cucilync 8.2 and installed the Office Addins. On a local machine installation, we have no problem with the addin. It works fine.
But in the Citrix installation, we have greyed out buttons for dialing. I have no idea where to begin with troubleshooting.
Has anyone a idea for me?
The OS is 64Bit and the Office is 2007 32 Bit. This should be supported i think so.
Thanks for your help!!!
Christian

Hello,
Please check for specific citrix supported enviroment here -
http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/click_to_call/8.0/english/release/ReleaseNote_c2c.html#wp2485669
If this is within the supported environment, then this is most likely a network issue (given the same user account works on windows workstation)
For deskphone control, CUCILync directly takes to callmanager over QBE. Please check "Server Health" for Deskphone status if it states "QBE connected". If it is saying otherwise, please check CTI Manager SDL log of callManager to check for issues. Also CUCILync problem report will have "core.log" file that might give more indication what the issue is.
For softphone control (CSF device), this is a SIP protocol device and a simple wireshark capture with "sip" filter will give out more info on the local machine.
Thanks

Why is my wi-fi greyed out? Why does battery not hold charge for more than a few hours? All since IOS7.

Why is my Wi-Fi greyed out? Why does battery not hold a charge longer than a few hours? All since upgrade to IOS 7.

To validate the operating system and radio software complete the following steps:
Tap Settings > About.
In the Category drop-down menu, select OS.
Ensure the Radio Version is only 1 number higher than the OS Version.
If not then follow this
http://www.blackberry.com/btsc/KB34666
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Grey out drop down list

H,i,
Does any one know how you can set a drop down list as
inactive and greyed out in code?
I am using ASP and javascript.
regards
Fifo

fifo85 wrote:
> Thanks for the response Mick,
>
> Just one question, What is the document.forms[0] suppose
to be?
> I have tried the name of my asp page followed by
forms[0] followed by the name
> of my drop down
"document.forms[0]" is a reference to the first form in the
document.
Since you didn't name your form, I assumed you have only one
form in
your document. Normally, you would name your form
<form name="foo">
Then you can reference it directly:
document.forms["foo"]
To disable a select object named "bar" in a form name "foo",
the
following will accomplish the task:
document.forms["foo"].elements["bar"].disabled=true;
//or as a shortcut:
document.foo.bar.disabled=true;
The "document" is a reference to your current document, not
the title.
This assumes a non-framed environment.
Mick
>
> i.e. CategoryListing.asp.forms[0].GroupDD.disabled=TRUE;
>
> but dreamweaver doesn't like it. it throws an error
message.
> I assume that form[0] should be replaced by the form
name of the form that
> contains the drop down.
>
> How is the syntax mean't to be?
>
> Thanks in Advance
>
> Fifo
>

SCUM Selection Greyed Out

Hi all,
I am trying to enable settings in which will allow role assignment in BOTH CUA and child system. Unfortunately, the selection for "Everywhere" is greyed out in SCUA --> Role/Profile tab. In my work environment, there is a need to allow role assignment in both master and child systems. How o I go with this? Couldn't found anything in Notes & SCN. Thank you for all your feedback!

There are a few exceptions in the user APIs for call backs to the CUA even if redistribution and local SCUM is not set. There are also two passive CUA tolerances for CREATE1 and DELETE which redistribute based on authorizations and not CUA settings.
I think we are getting warmer here...
My explanation -> the user was deleted but still had address data and PPOME assignments. PFUD was / is not running. Then the user ID was recreated (intended for a different person?) and saving in SU01 runs PFUD in their release for indirect assignments as well. The user ID is still mapped in Infotype 0105 and reconnects to the HR-OM role which the "person" still has.
The best way to avoid this is by never deleting user IDs (hard to avoid in CUA) and ensuring unique names and authorizing the redistribution user centrally to only do text comparisons.
In the special case of SMSY the user names follow a naming convention, so if CUA is not on the SOLMAN logical system then I authorize the SOLMAN callback user (only) as if it is a client to send the user to the SOLMAN to than the system can be connected. The roles can then either be added manually or via PPOME (which is perhaps what was attempted here).
Cheers,
Julius

Redirected Printer Settings Greyed out and Missing Finisher & Trays

Hi,
I have added a new local printer . The printer has 2 additional trays and a finisher added.
When I log onto the terminal server (server 2008 R2), the printer is redirected, but without the extra 2 trays and finisher. Most options are greyed out within the properties of the printer driver.
Same as this issue here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2eeeb270-9cbb-4628-ad22-0ef3df6549d6/printers-not-redirecting-properties-and-preferences
The driver is installed on the server and I have tried disabling the 2 GPO settings 'Use Terminal Services Easy Print printer driver first' and 'Use Remote Desktop Easy Print printer driver first'.
Does anyone know a solution to this??

Done a bit more digging and this is done 'by design' by Microsoft (I guess it's a limitation of their printing model, shame they haven't addressed this as the problem goes back to Server 2003 and still unresolved!).
This KB explains the problem: http://support.microsoft.com/default.aspx?scid=KB;EN-US;243942
I can now change the device settings for the redirected printer driver (as per KB article above), but after logging off the terminal server and logging back on, the redirected printer reverts back to the default settings.
This is a massive problem for my customer as they are unable to use most of the features on their new copier (they work within a terminal server environment).
Anyone else had this problem and been able to save changes to the redirected printer settings??
Thanks in advance.

3D environment greyed out

Similar Messages

Maybe you are looking for