3D Graph Color Bug

I am just discovering the new 3D graph objects (LV 2010) and noticed some odd behavior.
If you color the Graph object (not the plots), this cannot be undone (in other words Ctrl-Z does not work).
This is fine since a simple work around is to paint the object back with the original color.
I think it qualifies as a bug nonetheless.
However, here is an even more odd thing: if you paint the "ViewPoint" buttons (or whatever they are called), depending on where you click with the brush, you may end up with a square smack in the middle of the button as shown below (bottom right):
The problem is that there does not seem to be a workaround.
Since Ctrl-Z does not work, I tried to paint the square with a transparent color, and a few color combinations, but could not find a way to revert to the original "no square hidding the glyph" situation.
The only fix is to "Revert" to the previous VI status (which is pretty drastic), or delete the Graph object and put a brand new one instead (or replace it by a brand new one), which is barely less drastic.
Is this a known "feature"?
Solved!
Go to Solution.

Hi there, so that behavior is intended but there is a workaround that I was able to find for you. The attached vi lets you color the 3d graph and modify the properties and those properties will stay after you save.
Scott A
SSP Product Manager
National Instruments
Attachments:
Facade_2D_and_3D.vi ‏157 KB

Similar Messages

Setting bar graph color by means of formula

Is there a way to set the bar graph color other than chart expert->color highlight. I need alternate way of setting color like this
if data='ready%' then set color=green, I don't want manually set is ready* can be anything. Is this possible ?

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly

How change the report graph color in teststand

how change the report graph color in teststand?

Michael,
You might also be able to customize the style sheet associated with the report. The TestStand Help provides some information about how to customize ATML or XML style sheets to change report colors based on the status of test steps.
Please take a look at the following topics; are these helpful?
ATML Report Style Sheets
Modifying Cell Background Color Based on Step Status in ATML Test Results 5.0 Reports
XML Report Style Sheets
Modifying Cell Background Color Based on Step Status in XML Reports
Tom
TestStand Documentation

Change the bar graph color

Hi
Is it possible to change the bar graph color? I want the first bar to be green, second to be red, thrird to be orange and fourth to be gray.
Is there anywhere to specify the color?
Thanks

Did you find the Fusion 11g Web Guide section 23.5.1 any help?:
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31973/dv_graph.htm#sthref410
CM.

IGS Pie Graph - colors issue

Hello all,
I'm displaying an IGS Pie graph in a Web-Dynpro application.
Since in a pie graph the different parts of the pie are of the same series in different elements,
I couldn't find a way to set different colors to them using the chart designer.
When choosing a specific color, all the parts appear in the same color.
When choosing an automatic color, they appear in different color,
but then I don't have control over the color.
Is there a way to define the pie so that every part is of a different series?
Otherwise, Is there a way (by using the chart designer or by code)
To achieve an IGS pie graph with the colors of my choice?
Thanks ahead for any help,
Anuj

Hi
Use this [thread|IGS Pie Graph - colors issue; for IGS Pie Graph - colors issue problem.
Best Regards
Satish Kumar

Display color bug "blue tint" color issue

I've been all too familiar with the color bug since the first week i got my led macbook pro.. back then i was using fast user switching, and noticed it.. then did some research leading to the dmproxy fix, that tuaw wrote up an applescript for. http://www.tuaw.com/2006/03/29/fixscreen-applescript-to-fix-fast-user-switching- color-bug/
this worked for a long while... even through the leopard upgrade that I had hoped would solve it. I had to reinstall for an unrelated issue and since she doesn't use mine anymore i never set up an account for my girlfriend this time. so.. no user fast switching.. I thought i wouldn't even come across this problem again... but..
after getting back from my christmas vacation I notice that now that it has my external display hooked up the same thing happened. perhaps it happened earlier and i didn't catch it.. but either way, the same symptoms.. bad color, blueish tint, too cool,.. etc. etc.
Now when I try to run dmproxy, it wouldn't run.. i chalked this up to different location in leopard and found dmproxy. ran it.. and nothing.. so I go to my display sys prefs.. and attempt to calibrate the display.. it acts really funny,.. in that when the initial window comes up that has the checkbox for expert mode.. if i click that and then go to the next step.. as soon as i do, the screen changes profiles and look ten times worse.. and i'm unable to complete the calibration because nocorrect settings can make it look normal.. it has extreme tints.. if i go all the way back to the first window, it goes back to the original slightly off color.. if i try with out expert mode.. it doesn't look any better when done.. but it does give me a calibration file.
restarting, shutting down aren't doing anything.. and It is far enough off to be very bothersome.. is there an updated fix for leopard? anyone else come across this.. i don't want to have to go to the apple store.. please help.
Message was edited by: iamnotacannibal

I get the blue tint after my MBP wakes from screen saver, and I also have an external monitor attached. The blue tint only happens on the MBP screen, not the ext monitor. It only happens when I have the external monitor connected.
This may be a bit early to declare a fix for this issue, because I don't think I have permanently, but here's what worked for me today. In the Display Preferences, I had created a new Display Profile for the external monitor. I switched it back to the default profile (in my case Dell 2007FP), and activated the screen saver. When I stopped the screen saver, no blue tint on the MBP screen. Switched back to my custom Display Profile and repeated the process. No blue tint. Hmmm... Now I can't get the blue tint to come back after numerous attempts, when before I could reproduce it at will.
Give it a try and let us know if it works for you too.

CR Viewer graph color turns grey-yellow

I am facing mysterious probem on my web server hosted with dot net 2.0 web app using crystal reports and SQL2000, graph color turns grey-yellow suddenly. Not able to trace the cause or fix it permanently. Restarting the server resolves this issue. Could you please help URGENTLY, i am facing this since last 2 months.Server screen resolution is already set to 1024x768.
I am using crystal report for dotNET 10.2 for reports (bundlled with VS-2005)

You posted the same query to this thread:
chart color error on deployed server
Twice.
If this is important, I recommend you create a phone case and discuss with a technician over the phone. Phone cases can be created here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Marking this thread as "Answered" and locking.
Ludek

Color BUGS with new ATI 2600 HD

People with the new MAC PROs with the ATI 2600HD cards - list your Color bugs here. And solutions if you have them!
Here is what I am seeing:
1. In the Color FX room, if you try to make a VIGNETTE and set the Type to anything other than "0" or "1" you get a graphics bug - basically the vignette goes crazy and creates black lines all over the screen. Both zero and one only give you a circle vignette, and 2 is supposed to give you a square vignette.
2. Also in the Color FX room, trying to get your vignette to track along the path of a tracker seems to fail, and have the vignette move in the opposite direction.
Anyone else seeing this please pipe in - and if you have the same video card please give these a tes on your machine and report if you can reproduce this bug!

Stuart,
http://www.barefeats.com/harper8.html reports that the X1900 will work in the new Mac Pro towers, with one caveat: you must flash the card with the new firmware upgrade in an older, 1st gen Mac Pro.
Zeb

[svn] 3738: merging fix for LCDS-329 to trunk (XML graph serialization bug)

Revision: 3738
Author: [email protected]
Date: 2008-10-18 08:47:18 -0700 (Sat, 18 Oct 2008)
Log Message:
merging fix for LCDS-329 to trunk (XML graph serialization bug)
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-329
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Output.java

CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. The Problem: CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors. Are there some Hot Fixes that I need to apply to my copy of CR?
Thanks

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

CR XI - Problem Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) of an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corrsponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors.
Thanks,Steve

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

Set Marker Color Bug

I was relieved after much digging to find you can make a keyboard shortcut to make a marker of a specific color with just one click. As opposed to making a marker and then going back to it to change its color.
However for some reason when using this while playing a clip, this only works in a timeline, or on a video clip. When I use the same command on an audio only file, i.e. music cue. It just creates a marker of the default color 1. - This is only when playing the clip. If you park the playhead it works as expected no mater what the clip is.
I'm frustrated, because the main reason I needed this feature was to tap out the beats in music for easier editing while I listen to the music cue (in real time). I like to use color 1 for each beat in the 4-4 measure, and on the fourth measure tap out a new color so i can see where it repeats.. that way I can easily cut from color 2 to color 2 almost anywhere in the song seamlessly. Sometimes I choose a third color when the melody loops so I know I can smoothly truncate a song with little to no effort.
I noticed after the fact I can jump back to the marker and change it's color with the tool.. it just won't do it on an audio file while it's playing.
Is this just a bug? Just a bug on my system? Is it an intentional workflow on Adobe's part for some reason? Anyone else having this problem?
To map it open up keyboard shortcuts and sift for "set marker color"

Yes, I know it. But if I set attribute values on my page, everything is right. If I set it from code, there is an error.
I think that it is a bug, because component, for which I set attribute, has client id like: UIDataId:rowIndex:componentId. I set value to component on the third row, and have this value on components on the third and the fifth row.
To tell the truth, I am sure, that it is a bug. If it is not so, please tell me, how an I set attribute value to component, which I need. Is there any way? I think, no. And it is a bug.

Can you change the Graphs Colors in BEx Web Analyzer?

Dear All,
I have few queries I have developed via BEx Query Designer which I am opening from BEx Web Analyzer in portals. Unfortunately the colors in the Graphs are not very pleasant. I was wondering if there is a way we can customize the colors which is given by the standard.
I am aware that we can do this is BEx Report Designer. But I would like to do this is BEx Query Designer.
Please help..
Cheers,
Shanka

Hi Shanka,
There is no option as such in BEx Query Designer.
You can manipulate and play with colors only in Report designer or Web Application Designer.
In Bex Query designer, you will find only exceptions which are related to colors but chart colors cannot be manipulated in query designer.
If you are executing the report in workbook, you can change accordingly as it is excel.
Regards,
KK.

Graph Editor bug

Hello there, I'm having some problems with the graph editor on After Effects CC 2014. It shows like in the images below, almost as if the software couldn't process the graph, and it slowly starts to get more curved. Also I can't edit or even barely see the anchors, and it shows the curves for all the animated parameters, even though the option "Show selected properties" is enabled. It happened twice so far, and is related to specific comps, I checked on other comps in the same project and they were working just fine. My only guess so far is that it happened in comps where I am using that new script/preset called Ouroboros, but I'm not sure it's related to that, since the bug appeared on other layers without that effect. Any one has any clue or had this problem before?

Yes, expression evaluation can cause these behaviors and the script uses them extensively. Nothing wrong in that regard. The rest is unclear because you made your screenshots useless by clipping out the important info like the property names. Also full system info,exact graph editor options and all that will be required.
Mylenium

Critical graph scale bug in LV2009?

Put a graph or XY plot in LV2009 on Vista - and set the X scale to be in absolute time. If you do this in LV 8.6 you will now see multiple time stamps along the X axis. In LV2009 you will only get the two at each end.
Fill the graph with data...now you may get 1 extra axis point along the X axis...but never more, regardsless of the axis style, - and its position will either be in the middle or at either 25% or 75% of the full time range. (See attached picture of chart and graph).
I know this is not how things behaved before, but is it a bug? Unless I'm overlooking something it is, and it is a show stopper....I hope it's me.
If not, a fix should be sent out immediately.
MTO

In a project as big as LabVIEW bug fixes that involve changing the actual executable as opposed to changing some VI components, either in vi.lib or in one of the frameworks, is not a matter of days but more like several weeks, especially if it is something like this most likely going very deep into the operational handling of LabVIEW. This bug isn't there because of a typo but most likely because of an addition of some other code that now causes this behaviour. And simply changing it to behave as before might turn other features, specific to 2009 but also earlier ones suddenly into running havoc, so it is definitely not like changing some lines of code and then recompiling the entire thing and voila. It basically has to go through the entire regression test suit on all platforms as well as going through some serious interactive tests of many UI aspects by several guys/gals, before they can even consider wrapping everything up into a patch distribution. By that time this is done, the impationetly awaited Service pack fix for 2009 most probably is around the corner anyhow, so it will likely get wrapped into that release.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

3D Graph Color Bug

Similar Messages

Maybe you are looking for