3D Images Shift When Merged Together

Everytime I attempt to merge two 3D images, they will shift position. I really think this is a bug, and would hope that you have a solution! Thanks, Weewood

How do you render them? I've only seen this with the live renderer, but if you initiate a final render for output everything should work properly.
Mylenium

Similar Messages

Images shift when jumping to anchors

I have a file using manual menus connected to anchors. In the browser when I click on any menu item one of my images shifts. It's a patterned wall paper that must meet fairly close to look right. The shift of about 3/8" spoils the effect. I've deleted and reset the anchors but the shift persists. This errors previousy didn't occur in this file. I've made some change it seems which has created this shift. I deleted my broswer cache hoping that might fix the problem but it didn't help. I've checked where my images are pinned to and how they are set to fit in their space and it appears correct.(I am using tiling) As an aside I've begun to wonder if anchors are really a work in progress, I've noticed other issues with them that didn't seem to make sense.
CharlesSchutz

Aish,
I'm not able to provide a URL. All access to the site is under an NDA and
is hosted on a private server with encrypted access other than my local
machine. If you could tell me if this is a known issue then I can hand it
off to one of their developers to look into, It would be helpful to have
some ideas about what component could be the issue and if its possible to
get access to fix it?
I don't know the steps I took that created the error. The file did work but
began appearing I believe after I began fine tuning the anchors and moving
some of the content. That's all I know. As I mentioned it all looks
correct. The settings match another copy of this same file I have. The copy
with my new edits has this error of shifting images and at the level I am
able to understand it all appears correct.
Cordially,
Chuck Schutz
On Wed, Dec 18, 2013 at 11:41 AM, Aishvarya Raj Rastogi <

Colour shifts when merging layers

We are Fine Art Printers using PS4 on Windows XP and 7. Because we have to proof individual colours and individual areas we often have over 20 adjustment layers and masks on images greater than 1 metre square. The masks get hugely complicated and the images sizes are often well over 1GB. Normally we would take a Snapshot(?) Shift+Ctrl+Alt+E as we get an area correct, then move on to proof the next. We have an image with dark blue/black cloud and noticed the image lost contrast and colours subtly changed when we did this. We have tried flattening layers, merging visible layers, merging down adjustment layers and even saving as a JPEG, but the colours change slightly each time layers are merged. A global change like Levels is not an option for fine art images. We need to simplify the images and reduce the memory used for printing.
Can anyone help?

I just had the same thing happen on a psb file (also fine art). It does not appear to be display interpolation or another familiar issue. I compare previous versions of the file that contain the correct color with the flattened, incorrect version, and then go back in the history to a point before flattening and make a corrective color move that approximates a good final result when flattened. This workaround does not solve the problem exactly; I suspect PS discards some data in the flattening process of large files. This is happening in CS6, 2.5 gb, 16-bit RGB psb file with a Windows 7 OS. Hope you solved your particular problem.

Images blurry when merged with background - Captivate 5

I am trying to merge my buttons and several text boxes onto the background in order to keep file size down. When I merge with the background the buttos become blurry and the test is blurry. Any suggestions on how to correct this issue?
Thanks!

If the only reason is to keep the file size down then it is pointless as merging them with the background will not reduce the file size as they are still images. If they are image buttons ie not interactive than you could try placing them on a master slide. You only need to place the images once into the library then drag them from the library to reuse and captivate will be only using the image size once reducing file size and using the one image multiple times.

Image Shifts When Using Shared Printer

OS 10.6.8
Acrobat Pro 9.5.1
Printer: Canon Pixma 4800 ip4800
As far as I know, all drivers are up to date.
Printer is connected to an iMac and is set to allow sharing.
When printing a .pdf from another Mac (wirelessly via AirPort), the image is shifted slightly (approx 3/8") to the right and down on the printed sheet, cropping content.
All other remote printing is OK (including from other Adobe CS5 applications). I can also remote print the .pdf correctly using Apple's Preview application. Printing is also OK if printed from the iMac that the printer is connected to. Only time there is an issue is: Shared printing a .pdf using Acrobat.

Dear Larry,
Thanks for reporting the problem. You mentioned that page content is getting shifted by around 3/8 inches when printed using Mac Airprint using Acrobat which resulted in clipping of some of the content and other applications print fine.
Could you please pass on the same pdf to me as well? Although, it doesnot look dependent on any particular pdf but I would like to analyze certain behavior with the pdf you are using.
Please also confirm that you have not printed with "None" pagescaling option when you observed this.
Thansk,
Atul

Part of image shifts when inserting footer

Okay, when I go to insert a footer into a document, a portion - not all - of that document shifts. The document is an exported pdf from ArcMap which contains several thousand elements. All elements appear to remain in their original position with a single class of elements shifting by between 0.1 and 0.2" towards the bottom of the document.
I have never had this happen before when using Adobe 7.x, but now that I am using Adobe Acrobat X standard, this problem suddenly crops up.
Any help would be amazing as I am at my witts end...
Thanks,
John

Use the forum for Adobe Acrobat.

Background image shifts when scrolling

I have a background image on my pages but whenever I hard
return several times, the image mysteriously shifts over by itself
here are two different pages. The bg image can be found here:
http:www.logicorehsv.com/img/bg.png
PAGE A
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
background-color: #E8F1FA;
background-image: url(img/bg.png);
background-repeat: repeat-y;
background-position: center;
</style>
</head>
<body>
</body>
</html>
PAGE B
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
background-color: #E8F1FA;
background-image: url(img/bg.png);
background-repeat: repeat-y;
background-position: center;
</style>
</head>
<body>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
</body>
</html>
WHAT IN THE NAME OF GREAT CAESAR'S GHOST IS GOING ON HERE??
The background image on the second page SHIFTS over a few
pixels simply because I hard returned several times. The completion
of my entire site has been resting on this simple little headache.
Please help....

>>whenever I hard return several times
Stop doing that. There is never a valid reason in a properly
designed/constructed page to add empty paragraphs.
Probably... after adding content, even empty paragraphs, the
display window
in DW design view drops a vertical scroll bar thereby
changing the
horizontal location of the page's middle. Your bg image is
aligned middle so
it moves.
IOW there is no problem. Just build your page.
Walt
"logicore" <[email protected]> wrote in
message
news:[email protected]...
>I have a background image on my pages but whenever I hard
return several
>times,
> the image mysteriously shifts over by itself here are
two different pages.
> The
> bg image can be found here:
http:www.logicorehsv.com/img/bg.png
>
>
PAGE A
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
>
>
> <style type="text/css">
> body {
> background-color: #E8F1FA;
> background-image: url(img/bg.png);
> background-repeat: repeat-y;
> background-position: center;
> }
> </style>
> </head>
>
> <body>
>
> </body>
> </html>
>
>
>
>
PAGE B
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
>
>
> <style type="text/css">
> body {
> background-color: #E8F1FA;
> background-image: url(img/bg.png);
> background-repeat: repeat-y;
> background-position: center;
> }
> </style>
> </head>
>
> <body>
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> </body>
> </html>
>
> WHAT IN THE NAME OF GREAT CAESAR'S GHOST IS GOING ON
HERE??
>
> The background image on the second page SHIFTS over a
few pixels simply
> because I hard returned several times. The completion of
my entire site
> has
> been resting on this simple little headache.
>
> Please help....
>

Portion of image shifts when inserting a footer

Okay, when I go to insert a footer into a document, a portion - not all - of that document shifts. The document is an exported pdf from ArcMap which contains several thousand elements. All elements appear to remain in their original position with a single class of elements shifting by between 0.1 and 0.2" towards the bottom of the document.
I have never had this happen before when using Adobe 7.x, but now that I am using Adobe Acrobat X standard, this problem suddenly crops up.
Any help would be amazing as I am at my witts end...
Thanks,
John

Use the forum for Adobe Acrobat.

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix. Worked fine until now. Thanks

I am not sure what's happening with IE9 (no live site) but I had real problems viewing your code in Live View - until I removed the HTML comment marked below. Basically your site was viewable in Design View but as soon a I hit Live view, it disappeared - much like IE9. See if removing the comment solves your issue.
<style type="text/css">
<!-- /*Remove this */
body {
 margin: 0;
 padding: 0;
 color: #000;
 background:url(Images/websitebackgroundhomee.jpg) repeat scroll 0 0;
 font-family: David;
 font-size: 15px;
 height:100%;

Why do the playlists merge together when you turn the I touch ?

Why do the playlists merge together when you turn the I touch ?
I have multiple playlists on my I touch but if you turn it horizontal all lists are on the view.

The iPhone isn't the issue. It's your Apple ID. Whenever you update an existing application, it requires that you use the Apple ID that was originally used to download the app in question.
Did you create a new Apple ID for your new iPhone?

My contacts don't sync on icloud on my iphone some contacts disapear on iphone and some contacts hae been merged together to make one contact when they are not related. Can anyone help?

My contacts don't sync on icloud on my iphone some contacts disapear on iphone and some contacts hae been merged together to make one contact when they are not related. Can anyone help?

If you log into Icloud.com, are all your contacts correct there? If the answer is Yes, I would then turn contacts OFF on your phone, and then turn them back on. Do not merge, but replace with Icloud content.
This is usually the quickest way to edit a bunch of contacts, through the web interface.

When merging from lightroom 5 to panorama in Photoshop cs6, photoshop opens but image does not load?

the files load and cs goes through the motions of adding each image then when all have been loaded it seems to remove them all and i am left with nothing again.

Edit In doesn't work in Lightroom 5.5 from Photoshop CC 2014

LaserJet Pro 200 color MFP M276nw prints image shifted 1/2" from top of page.

When printing any report, diagnostic or form from the machine system I get printed image shift approx. 1/2" from the top.
Is there any adjustment that can be made to the MFP to center image?

Hi @patrick22152,
I understand that when printing documents or a printer hardware self test, it shifts 1/2" from the top of the page. I can help you with this.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
It sounds like the paper isn't feeding properly. Since you are having this issue with the hardware tests and printing from the computer. If it was just the computer, I would check the paper type selected in the print driver, to make sure it isn't set on the proper paper type and not the default unspecified paper.
Try another type of paper to see if you get the same results.
I have provided a document with some steps to try to see if that will resolve the issue.
'Load Paper' Error Message Displays and the Printer Does Not Pick Up or Feed Paper.
Disregard the title.
Here is a example of how the Configuration Report should look like.
Printing a Configuration Report.
Run a cleaning page:
From the Home screen, touch the Setup button.
Touch the Service menu.
Touch the Cleaning Page button.
Load plain letter or A4 paper when you are prompted.
Touch the OK button to begin the cleaning process.
What size and kind of paper are you using?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Does anyone know how to save / preserve image maps when updating graphics?

Hello all,
I'm currently working on a RH7 HTML project, which I've designed to be used in support of a software application.
Some of the application's dialogue boxes have quite complex multi-tabbed GUIs, so when it comes to describing their functionality, you often end up with a long list below the graphic image. What this means of course, is that the user is forever scrolling up and down to make reference between the GUI and the explanatory text.
I hit upon an idea I'd used previously, whereby I created popups to multiple image map hotspots. It works like a dream and the client and users really like the concept - but there's a snag (apparently).
Because the application is still in development. some of those GUIs are (and will continue to) change. No problem with that either - until I try and insert the updated graphic. Poof !! All my hotspots disappear . . .
Surely I'm not alone in trying this approach and there must be some way of preserving the hotspots?
Any suggestions?
Bob (in a UK time zone)

Hi there
It sounds like you are using the standard methods of inserting an image. Don't do that!
All you need to do in these cases is to use Windows Explorer to save the updated image using the same file name and replacing the former image. When you do this your other data will remain intact. If the new image is a different size, just right-click it inside the RoboHelp HTML editor and choose Reset Size. You also may need to tweak your hotspots if things shifted some.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

3D Images Shift When Merged Together

Similar Messages

Maybe you are looking for