3D in AE for gray polarized 3D stereoscopic lenses

Is there a way to create 3D motion graphics that are viewable using the gray polarized 3D stereoscopic lenses? I know there is a way to create graphics viewable using the old-fashioned 3D red/blue lenses.  But, I haev 3D video and would like to create text screens and overlays viewable with the gray polarized lenses  viewers are already using (like Real 3D, etc.)

AE can make files that you can use, but in order for the polarized lenses to work, you need a system to deliver polarized light. A 3d TV that uses passive 3d technology or a special projector system are required. It will not work on a regular computer screen.

Similar Messages

  • I have a EOS Rebel Ti film camera which I used for business years ago, 3 lenses, wide angle to

    telephoto.  Is there a market for these and do the lenses work on current digital Canon cameras?

    Mike wrote:
    Hi jonesy!
    Thanks for the post.
    All EOS cameras, both 35mm and film, have the Canon EF lens mount.  Any of our EOS Digital SLR cameras will work with the same lenses you were using with your EOS Rebel Ti.
    The reference to "all EOS cameras, both 35mm and film" is sure to confuse some people, especially if this is the first time they've heard of a full-frame Rebel. And as most owners of digital Rebels are aware, not all EOS cameras have the EF lens mount, which does not accept EF-S lenses.
    So I'd put it this way:
    "All EOS film cameras have the Canon EF lens mount. Since all of our EOS digital cameras can accept lenses disigned for the EF mount, the lenses you were using on your EOS Rebel Ti will work on any EOS digital camera."
    Bob
    Boston, Massachusetts USA

  • Nano G6 needs  reveiver plug-in for wearing polar wearlink+nike+?

    Only what i want is to checking heart-rate while working out.
    If i buy a "Polar WearlinkNike" transmitter for checking heart rate when workout at gym.
    Do i also need to buy the receiver(of nike+ipod SportKit) to plug into the dock connector on iPod nano G6 or G5??
    PS.
    I don't want and it doesn't need the nike+apple wireless sensor(the red&white round-shape one) in my shoes. (i don't wear Nike at all)

    You do need to plug in the receiver in the 6G Nano iPod to use the Polar Wearlink+.
    I just bought the iPod Nano (6th G, touch nano) and I coupled the Polar HRM Wearlink + in the Nike+ iPod settings. It was actually a non brainer. Plug the receiver in, let the iPod link with the HRM, and done. Same with the sensor in my Nike+ shoe.
    Both of them work. I'm so glad to have this come together. The Polar Wearlink+ is cheaper then buying the whole Polar package (with watch etc). Of course, the iPod costs you also 159€, but then you can beam your workouts to the Nike+ website, which is very nice to follow your workouts. When you did the workout, what you did at the moment (run your longest, run the most calories etc).
    Now that I tested it just by walking around and have a little run for a few meters, I cannot wait to get it to work.

  • Anyone have solution for gray screen problem?

    Acrobat displays gray screens only for each page of file when opening from flash drive.  Files open properly from same flash drive on other computers so fiies are OK.  Latest Acrobat update installed.
    Problem started within last few weeks, worked fine prior to that.

    I'm having the same issue opening an attached pdf from Outlook 2013.
    From the age of your post, I see Adobe is very concerned about this.

  • TS1559 any other solution for grayed out or dim wifi button

    Need help in finding a solution to get rid of the grayed out or dim wifi button, already tried whats posted on the apple support page and did not fix problem

    From the above referenced article:
    If you still can't turn Wi-Fi on, please  contact Apple  for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see   these steps.
    Now try doing as it says.

  • What to do for grayed out WiFi?

    I restarted my iphone 4s and now my wifi is grayed out in settings. I didn't update it or anything. It is running ios 7.0.6. What can I do?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • "Use This Mailbox For" grayed out

    Hello.
    This question has been asked before, but has not been asnwered that I can tell.
    My question is not "what is this menu item for?" or "How do I use this feature?" ... the issue that I am having is that the options are all unavailable when I try to use the feature.
    Not looking for workarounds or other optoions ... I would really like to know why I'm seeing what I'm seeing, and what I need to do to get it to function.
    Thanks!
    -Travis

    I too have this problem.  I was trying to allocate a mailbox for Spam messages but all the options as you stated are greyed out.  I have search all over the place and cold not find a answer for this so I was wondering if many others are affected by this. 
    So I took a look at my wifes iMac and her mail application and she has the same problem so it is not an isolated one that I can tell.  I phone my son who has a Macbook Pro and he reported the same problem, what the heck is goining on here?
    I and my wife use MAC O/S 10.8 Mountine Lion and my Son uses 10.6 Snow Leopard with the latest patches.
    NOTE: I just found out why they are greyed out within this article http://goo.gl/HbR6f as we were using local mail boxes.

  • Will the iPhone 6 ever support the BLE feature of the Keiser M3i exercise bike like it does for the Polar H7?

    The Keiser M3i and the Concept 2 Rowing Ergometer feature BLE but are not recognized natively on the iPhone's bluetooth menu Is there a chance of this being changed on an update of IOS?

    WmCrosson wrote:
    The Keiser M3i and the Concept 2 Rowing Ergometer feature BLE but are not recognized natively on the iPhone's bluetooth menu Is there a chance of this being changed on an update of IOS?
    iPhone 5, iOS 6.0.1
    Maybe you should update your iOS and find out?

  • How to add profiles for older camera and older lenses, Fuji S3 Pro, Nikon D90, Nikon 28-85

    How can I obtain and install profile for a Fuji S3 Pro and Nikon D200
    How can I obtain and install profile for a Nikon 28-85 AF
    A bit of a newbie , just retired

    About Lens Profiles:
    They are different for Raw and JPEG. Sometimes a profile is only available for Raw, sometimes for JPEG, sometimes for both, sometimes for neither. If it is available, it can be found by searching in the Profile tab of the Lens Corrections panel. If it doesn't show available when searching here, you can go to the Adobe Lens Profile Downloader and see if another user, like yourself, has created one. If not, you can download the Adobe Lens Profile Creator tool and make one yourself.  See the link below.
    Photoshop Help | Digital Negative (DNG)

  • Item Category Grayed Out (Not Available for Input)

    Hi Experts,
    I want to know SAPs logic for graying out it. cat. field (PSTYV) when entering an Order. Item category  cannot be changed while creating an order once its determined. How & why does SAP grays out it. cat. field and under which circumstances.
    My case: I have a configurable item and based on this item subsequent item and its it. cat. is determined, once SAP determines second item it is graying out it. cat fields on both items. Though in configuration I have manual it. cat. maintained for both items along with dependancies. Any info on this matter will be greatly appreciated.
    Thanks

    Hi Ron,
    Please refer to note 208245 as it has the answer of what you are looking for & possible workaround solution to meet your business requirement. Otherwise, please do not hesitate to update this forum.
    Thank you.
    Best regards,
    Huey Chin

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • Gray screen on start up and not able to repair hard disk and not able to take back up.

    My macbook pro bought in early 2011 with snowleopard software and than upgraded to lion is now running on system 10.7.5 .
    My problem is i get a gray screen on startup with apple logo and spinning ball.
    I tried all the solutions mentioned in the apple support for "gray screen appears during start up". This Disk utility says that the Hard disk cant be repaired.
    Before i format my disk and erase all data and install Mac os x again, i want to take back up on a external hard disk. I bought a new 2tb external hard disk so that i can take a back up.
    As i try to take the backup of the image, it gives me an error "cannot allocate memory"
    i tried to change the configuration from compressed to read/write and tried different encrption methods but unable to take backup.
    i sometimes get error "input/output".
    how do i take a backup. somebody please help

    See OS X- Gray progress bar appears under Apple logo during startup. If you need to reinstall OS X, then do this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Working space settings for Grayscale?

    (Preliminary remark: I'm using the German version of PS, so some items may be called differently in the English version.)
    In the colour settings of PS CS4 I can define a working space for gray scale pictures. What does this setting actually do?
    I know that there is no ICC colour management for grayscale pictures, so what do the dot gain settings do? Do they just darken the display or is there more? What do the gamma settings do? What does "Black&White mean? What does sGray mean? Does Photoshop somehow add ICC profiles to grayscale pictures? If yes, which and what does it do?
    So far I decided to just set "no adjustment". The reasoning is that this should display the true greyscale values on the screen. I then can add dot gain as needed manually as a final step. Does this make sense or am I misunderstanding something?
    Bonus question: What about the spot colour settings? Are they applied to multichannel pictures?

    p_d_f wrote:
    Yes, there really are Grayscale ICC profiles...
    Thank you. After contemplating a bit, I think I've finally understood where my confusion originated. But the more I understand, the more new questions arise.
    So far I've understood that if a picture is to be displayed on an internet site or used in an office application, then I best work with the gamma 2.2 profile. If the target computer honours ICC profiles, then it desn't matter anyway which profile I use, but if the target computer ignores ICC profiles, then most computers out there will display the picture with a gamma of 2.2 (more or less) because this tends to be the default setting on most computers.
    But when it comes to pictures for print, some questions remain.
    To begin with, I could continue to work as I did without colour management. I would first "convert" the picture to the profile "no corrections". This would mean that "the numbers" in the picture are the same as the gray values the final user should see. And then I would account for dot gain by either applying a gradation curve or by saving as EPS with a transfer curve.
    However if I want to use colour management, then I "convert" the picture to the the printer's ICC profile. Without a specialized program, I cannot create such a profile myself, even if I know the transfer curve. So either I find a suitable profile somewhere or the print shop must provide me that profile.
    So far I think I understand. But now the questions.
    Concerning missing profiles: Can I just take the gray channel of a suitable CMYK profile (e.g. ISO Coated v2) or would this contain some sort of black generation information which would spoil a grayscale picture?
    I assume that it's possible to embed the black and white point into the profile, so that I don't have to worry about them anymore but can assign the full range of gray values from 0% to 100%. With the colour sync tool, I looked into the grayscale profiles that come with Photoshop, and as far as I can tell, none of them does set the black and white point. So I assume that despite using colour management, I have to do this by hand in the picture itself by assigning appropriate grayscale values?
    If I find a profile which does set the black and white point, then I assume that this is done lossless when I set the intent to "photographic", but when I set the intent to "colorimetrc", then the shadows and lights are just clipped (which jeopardizes the idea)?
    I see that the profiles contain a intent. I assume that this embedded intent will be overridden by the colour setting in photoshop?
    What does the option "blackpoint compensation" (or similiar, I use the German photoshop) do with grayscale images? Does it alter the black point, so I should turn the potion off off when I set it by hand? Is there some documentation what this option *exactly* does?
    The colour settings in Photoshop offers "dot gain xx%" settings, but I didn't find such profiles. Do I assume correctly that those are "internal" profiles of photohop? Are they documented somewhere?
    Thanks.

  • I would like to use a polar plot in the application now I am developing.

    Is there any kind of custom control or FP wich allows me to implement this kind of graph with CVI ?. (of course without doing Rec 2 Polar transformation and PlotXY).
    Thanks in advance,
    José M.

    There currently is not a custom control for doing polar style plots in CVI. There is only one for smith charts. You can use the standard 2D-graph to create polar plots with the help our analysis libraries, or if you need a more custom display, you could draw your own plots in a canvas control.
    Best Regards,
    Chris Matthews

  • Polar plot with legend points

    I can put one Polar Plot with legend in points?
    Case:
    I have magnitude and phase arrays for build polar plot and i want put rotation legend in each point of measurement. Then we have 3 arrays (magnitude, phase and rotation), but rotation need stay like legend for each point.
    Somebody already do it?
    thx for tip.
    Leonardo de S. Cavadas
    Maintenance Engineer and Inspection - Bureau Veritas do Brasil
    Engineer Metallurgist with emphasis in Advanced Materials
    Technologist in Computer Science

    Unclebump,
     i do one simple modification to be possible add rotation value to image, isn't better solution but i think that i'm near to solution way. Look these VIs, Re-link is necessary.
    Leonardo de S. Cavadas
    Maintenance Engineer and Inspection - Bureau Veritas do Brasil
    Engineer Metallurgist with emphasis in Advanced Materials
    Technologist in Computer Science
    Attachments:
    Plot Polar Data with Legend.vi ‏74 KB
    OtherPolarPlot.vi ‏67 KB
    Polar Plot with Legend.vi ‏75 KB

Maybe you are looking for