3D layers not rendering

Hello - I've had some issues getting 3D layers to render. I've tried rendering out of after effects directly, used the Media Encoder, and now I'ts giving me issues in my comp view. I go to render and it would only 'render' the 2D layers. I was able to fix it before by pre-comping the 3D part. I had the issue again so I pre-comped the whole comp I was in so now I'm in just a 2D comp, referencing a 3D comp. Should work, right? None of the 3D stuff shows up again! Not even rendering this time, just trying to see it in viewport. Any thoughts?
Fast previews are off, 64GB of RAM, Quadro k4000, 3 montors, 6GB free space, Dual Xeon processors.
Ian

Are you using the ray-traced renderer or the standard renderer?
Are your layers set as guide layers?
Are you looking through the Active Camera in the composition that has the 3d layers?
Have you set any of the comps to collapse transformations/continuously rasterize?
Also, what exact version number of AE are you using (down to the last decimal point)?

Similar Messages

Server Side Includes not rendering correctly in Firefox with Layers

Hi
The server side includes are not correctly rendering with layers in firefox. From my site here:-
http://www.osteriastecca.com/index.php
the home_page.php content renders above a layer on the index.php page. Initially I thought this might be a Flash layer issue but the wmode is set correctly to transparent and it works fine with a normal ssi. It also works fine in Firefox without a server side include as you can see here:-
http://www.osteriastecca.com/index_old.php
Works fine in IE and Safari, but not Firefox.
How can this be rectified?
Regards
Glennyboy

What testing server setup do you have? Are you using something like WAMP?
What do you see on screen which tells you the SSIs are not rendering? Any error message?

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

Selective footage not rendering!!

Hi,
I have a 5 min video and when rendering, it displays a slow preview as it renders, everything looks fine there, but when I look at the rendered .avi, there are two layers which are not rendering, even though they appear in the preview and everything works fine when I view the footage inside AE.
I have tried several combinations of rendering and none seem to work. The only similarities that share the two sections which wont render properly, are added effects and keyframes to their effects, but there is another layer which has effects too and that one renders fine.
I will gladly provide any needed information that you may require in order to get more information regarding this issue. As I have stated before, I have tried a lot of combinations, the final one being with everything set to "Current Settings" and with Open GL on anf off.
Thanks!!
Windows 7
After Effects CS5

**UPDATE**
The first layer which would not render had a Mask inside which did nothing, I deleted that and it seems to work now.
The second layer had it's opacity down to 8% --__-- '
What really bugs me is that while I'm playing the video inside AE or even watchig the preview as it renders, it shows differently that how it ACTUALLY looks like!!
Anyway to fix this, or do I just have to live with it?
Regards.
Issue #1: Solved.

Adjustment Layer not rendering...

I have a fairly basic comp consisting of 3 or 4 3d layers spaced out along the Z axis, two precomps containing some edge lighting effects, a camera, a light, and the troublesome adjustment layer. The adjustment layer only contains some color correction and a flare. I thought perhaps a certain effect may be causing the layer not to render, but i eliminated that possibility by removing the effects i had and trying several other, the layer was still not rendering. I think I have exhausted all of the really simple solutions, nothing is solo'd, all the layers are visible in the preview, the layers are all in the correct order etc.. I can't SS the project right now as I am not at home, but i can tell you that I am working with CS5.5, on windows 8.1, i5 cpu, 8 gigs of ram. The really frustrating part is that a slightly earlier version of the project successfully rendered the adjustment layer and I don't remember changing anything major... Suggestions? Shots in the dark? Anything? I will post a SS later in the day. Thanks in advance to any and all who have advice.

No problem! Glad to help.
Don't forget to mark the solution as correct, so that future forum visitors see this thread as solved. Keep having fun with After Effects and let us help if you get stumped again.

FCPX sluggish, not rendering

I've been successfully editing a project in FCPX (latest version) for three weeks. Now, suddenly, it has become very slow and is no longer rendering. I've trashed the preferences, repaired the permissions, restarted, but nothing seems to help -- still slow, still not rendering. I have a 27" iMac with latest OS. My media files are on a separate hard drive. I should have plenty of memory. Why should this work just fine for weeks and then suddenly go South? I don't know what else to do and I'm heavy into editing an important project. Help!

I'm doing a project that involves a lot of stills with greenscreen, so basically the entire video is done with virtual backgrounds. This has worked fine -- the key is actually quite good. As I pointed out, I was zooming along doing very well with this, even succeeding in working with 4-5 layers of video. Then suddenly, two days ago, without me doing anything different, it got very sluggish and finally reached a point where it wouldn't render anything. It just sat. I've trashed the preferences, repaired the permissions, restarted, etc., I had even gone on line to get help and did everything they suggested (which was trash the preferences) and after our first session it actually worked better for a couple of hours. However, after rendering my work, the next day the same thing started all over again. I'm at the point now of having to work off the computer in my office, edit a little, burn a Quicktime movie, and place that on the time line in a new Event/Project, and move back and forth from home to work -- which, obviously is going to be a pain in the ***. I would just like a simple explanation of why it all of a sudden stopped working -- and what I can do to fix it.

Mapviewer themes not rendering in correct order

I have a map request that consists of three themes in this order:
1) wms_getmap_request grayscale evelation map
2) jdbc_query datalayer
3) wms_getmap_request state borders map
I assume that each of these layers would render in the order it is defined, so grayscale would be the base, followed by the datalayer, topped by the borders.
this is not the case. the wms_getmap_request layers are rendered first and the datalayer is placed over the top of them.
here is an example request:
<map_request
datasource="vuln_public"
srid="8265"
width="740"
height="405"
bgcolor="#ffffff"
transparent="true"
antialiase="true"
format="PNG8_STREAM">
<box>
<coordinates>-126.0,20.381081081081078 -66.0,53.21891891891892</coordinates>
</box>
<themes>
          <theme name="GRAYSCALE_WMS">
               <wms_getmap_request>
                    <service_url>http://ims.cr.usgs.gov/servlet/com.esri.wms.Esrimap/USGS_EDC_Elev_GTOPO</service_url>
                    <version>1.1.1</version>
                    <layers>GTOPO60+Grayscale+Shaded+Relief</layers>
                    <styles></styles>
                    <srs>EPSG:4326</srs>
                    <format>image/png</format>
                    <transparent>true</transparent>
                    <vendor_specific_parameters>
                         <vsp>
                              <name>srs</name>
                              <value>EPSG:4326</value>
                         </vsp>
                         <vsp>
                              <name>transparent</name>
                              <value>true</value>
                         </vsp>
                         <vsp>
                              <name>format</name>
                              <value>image/png</value>
                         </vsp>
                    </vendor_specific_parameters>
               </wms_getmap_request>
          </theme>
     <theme name="DATALAYER" user_clickable="false">
<jdbc_query ...>
SQL QUERY........
     </jdbc_query>
</theme>
<theme name="STATE_BORDERS_WMS">
     <wms_getmap_request>
                    <service_url>http://catalog4.usgs.umr.edu/cgi-bin/basevector</service_url>
                    <version>1.1.1</version>
                    <layers>stateprovince</layers>
                    <styles></styles>
                    <srs>EPSG:4326</srs>
                    <format>image/png</format>
                    <bgcolor>0x666666</bgcolor>
                    <transparent>true</transparent>
                    <vendor_specific_parameters>
                         <vsp>
                              <name>srs</name>
                              <value>EPSG:4326</value>
                         </vsp>
                         <vsp>
                              <name>transparent</name>
                              <value>true</value>
                         </vsp>
                         <vsp>
                              <name>format</name>
                              <value>image/png</value>
                         </vsp>
                    </vendor_specific_parameters>
               </wms_getmap_request>
          </theme>
</themes>
</map_request>
(the wms layers should work unless you're behind a firewall that's blocking them. you will have to add your own query.)
any way around this?
any help is appreciated

Hi Forum,
I have a similar problem but not quite the same one. I am creating Oracle Maps application with a georaster surface at the top (with certain level of transparency) along with a road network below it. But, probably due to this default MapViewer rendering, the road network is being rendered at the top of the Georaster surface even when I make the Georaster completely opaque.
I have created the map in MapBuilder and generated the tiles using MapViewer. While previewing the map in MapBuilder as well as looking at the generated tiles, I am facing the above problem. Can you please tell me whether I can set keepthemesorder="true" somewhere so that while generating the tiles I don't come across this problem.
Thanks a lot.
Regards,
Sudip

Transitions not rendering properly - corruption

My transitions are not rendering properly when I try layering two. It was working fine before, now suddenly it is not. I am using FCP 6 and I have Slick FX add ons. The add on was working fine before. I've tried trashing the FCP preferences but to no avail.
See here for a sample -
http://metrosi.com/Picture3.png
Any other suggestions? Please help!
Jennifer

Seems that the problem is with specific Slick FX transitions. Ones under Slick FX Transitions - 3D.
Things tried....
Tried using the Rotate transition in another location, same issue. Looked ok in the timeline prior to rendering.
There is a Slick FX transition in the timeline that appears to be rendering properly...Cylinder. Put another in a different part of the timeline and it rendered fine (Spin Zoom)
Tried another 3D one (Spherize) -looks fine in the timeline before rendering...rendered fine.
Tried another 3D one (Tube) - did not work.
Tried adding Rotate in after adding others...still not working.
Turnstile not working also (opened a new sequence and tried adding it)
Twist not working either.
So...not sure what to do about it!

JSF Pages are not rendering correctly when loaded using Non JSF actions

Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
Sudhakar

Hi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

LIbrary thumbnails not rendering

I have dozens and dozens of thumbnails in library grid that do not render. The boxes show up as empty grey squares with keyword icons among others. There does not seem to be any pattern or reason that some photos render fine and others do not. If a photo is taken to develop mode then the thumbnail renders as the photo loads in the main window, otherwise the same photos that are all grey in library view are grey in develop view until the individual photo is loaded. Closing LR and reopening it seems to cause any photo which was originally not rendered but then forced to render in develop to go back to the unrendered state.
This is driving me crazy as I cannot count on LR to display the images I have in the catalog. Syncing a folder which has many of these unrendered previews does not indicate any missing files.
Help.
Lightroom 3.2 64 bit
Windows 7
Catalog w/ about 18000 images upgraded from LR 2.7

Check other threads in this forum. I recall this is usually caused by a bad display colour profile. This is apparently more common with some Windows systems.

Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
I noticed the following:
We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
No errors show in the log. IS THIS A BUG???????????????
UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
Edited by: user8333408 on Jul 7, 2011 9:23 AM
Edited by: user8333408 on Jul 7, 2011 9:24 AM
Edited by: user8333408 on Jul 7, 2011 10:08 AM

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

Safari not rendering a page correctly

A webpage I created in Dreamweaver uses drop down menus that are supposed to display just to the left of the link they drop from. In all other browsers they work correctly, but since the latest upgrade in Safari to 3.0.4 as a part of OS 10.4.11 on my Macbook, they are not rendering correctly. Instead they are appearing much further to the left where it's difficult to move the cursor to them before they disappear. Until I changed the color of the drop downs they were disappearing into the background. Any ideas why Safari is not rendering them correctly? I'd like to keep Safari as my primary browser, but if it won't render my own page correctly, what other pages might it be messing up? Address of the page is http://www.montgomeryschoolsmd.org/schools/woottonhs/ The drop downs are connected to the central column list that has small arrows beside the words. They will probably work correctly for you, but won't for me in Safari. What can I do to fix it?
Thanks,
KWolfrey

Hi,
I'm running 10.4.11 with Safari 3.0.4 and as far as I can see the menus seem to work just fine here.
Do you have a custom stylesheet set in Safaris advanced preferences? (Some Safari enhancer applications set one even if you didn't manually set one so double check to make sure.)
Also, do you use PithHelmet?
One quick test you can do to help narrow down things is to try Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> \[+\] to create a test one (and \[-\] to remove it if needed)
Lastly, I doubt these [errors|http://validator.w3.org/check?uri=http%3A%2F%2Fwww.montgomeryschoolsmd. org%2Fschools%2Fwoottonhs%2F&charset=%28detect+automatically%29&doctype=Inline&g roup=0] have anything to do with your problem since it seems to work fine for me, but you might want to look into them at some point.

h:messages tag not rendering right

Hi All,
I have an <h:messages /> tag in my jsf page and it's not rendering correctly.
This is the tag in my page, verbatim:
<h:messages />
And this is the output when validation errors are created:
Validation Error: "lastName": Value is required. Validation Error: "firstName": Value is required.
That's it. No List, no nothing, just space-delimited validation errors!
When I specifiy layout="table", things are fine, but specifying layout="list" doesn't solve the problem.
I'm using v1.1 of the jsf implementation.
What gives?
Thanks,
John

I got the exact same problem.. Is this already logged as a bug in JSF?

Page is not rendering as per requirement request

Hi All,
Basically Here is the scenario.
Based on selectoin of particular service item from combo box(dropdown list), We are creating the JSF controls dynamically on new page for further process.
We are maintaining the controls information in database that need to be created dynamically and rendered for each service.
And I am able to create the controls dynamically and able to place them on page perfectly.
Until here everything looks ok for me.
But main problem I have identified is when I go for new request, I am getting the same old page when I select the other service.
Initially I though this could be a problem of caching and I have placed meta info in order to expire the page. But that was no use.
So I logged all the data that is coming from database and logged the information where I have created the controls dynamically..
What I have identified is I am getting the right data on paricular service selection and even I am able to see that methods execution is correct. I was stunned and not able to understand why the JSF is not able to show the controls.
So I searched the JavaDoc for solution. I though I could use FacesContext.release() method. But that does not help me. Even I tried to clear the parent objects using gridpanel1.getChildren().clear(). Even that does not supported me :(
In order to understand my problem, here I am pating the code.
Please help me why the hell my page is not rendering
Below is code in constructor
javax.faces.context.ExternalContext ec = context.getExternalContext();
            javax.servlet.http.HttpServletRequest request=(javax.servlet.http.HttpServletRequest)ec.getRequest();
            String service=request.getParameter("form1:cmbServices");
            int serviceid=-1;
            if(service!=null) {
                serviceid=Integer.parseInt(service);
            gridPanel1.getChildren().clear();
            controls =getControls(serviceid);
            HtmlControl[] controlArray =controls.getHtmlControls();
            //log(controlArray.length+" Length");
            for (int i =0;i<controlArray.length;i++) {
                HtmlControl control =controlArray;
//log(control+" Control");
//log(controlArray.length+" Length");
if (control.isRadio()) {
addRadio(control);
//log("Entered here in adding radio");
else if (control.isCheckBox()) {
addCheckBox(control);
//log("Entered here in adding checkbox");
else if (control.isTextBox()) {
addTextBox(control);
//log("Entered here in adding textbox");
here is the code for dynamic creation of controls
private void addRadio(HtmlControl control) {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue(control.getDescription());
        String desc =control.getDescription();
        desc=desc.replaceAll(" ", "_");
        outputText.setId(desc);
        outputText.setStyleClass("bodyText");
        HtmlSelectOneRadio radio = new HtmlSelectOneRadio();
        radio.setBorder(0);
        radio.setLayout("pageDirection");
        //radio.setId("Radio_"+control.getId());
        radio.setId(control.getName()+"__"+control.getId());
        UISelectItems items = new UISelectItems();
        Radio objRadio =(Radio)control;
        // vectDefaultSelectItemsArray
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        //log("vectDefaultSelectItemsArray :"+vectDefaultSelectItemsArray.size());
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        for (int i =0;i<objRadio.getValues().size();i++) {
            arrays[size - 1].add(new SelectItem(objRadio.getValues().get(i)+"",""+objRadio.getTexts().get(i)));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{consumer$jobInfo.arrays["+(size-1)+"]}"));
        radio.setStyleClass("bodyText");
        radio.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(radio);
        parent.getChildren().add(gridPanel);
    private void addCheckBox(HtmlControl control) {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue(control.getDescription());
        outputText.setStyleClass("bodyText");
        String desc =control.getDescription();
        desc=desc.replaceAll(" ", "_");
        outputText.setId(desc);
        HtmlSelectManyCheckbox checkBox = new HtmlSelectManyCheckbox();
        checkBox.setBorder(0);
        checkBox.setLayout("pageDirection");
        //checkBox.setId("CheckBox_"+control.getId());
        checkBox.setId(control.getName()+"__"+control.getId());
        UISelectItems items = new UISelectItems();
        CheckBox objcheckBox =(CheckBox)control;
        // arrays[0]=new DefaultSelectItemsArray();
        //arrays[0].clear();
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        //log("vectDefaultSelectItemsArray :"+vectDefaultSelectItemsArray.size());
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        // array.clear();
        for (int i =0;i<objcheckBox.getValues().size();i++) {
            arrays[size - 1].add(new SelectItem(objcheckBox.getValues().get(i)+"",""+objcheckBox.getTexts().get(i)));
            //     array.add(new SelectItem(objcheckBox.getValues().get(i)+"",""+objcheckBox.getTexts().get(i)));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{consumer$jobInfo.arrays["+(size-1)+"]}"));
        checkBox.setStyleClass("bodyText");
        checkBox.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(checkBox);
        parent.getChildren().add(gridPanel);
    private void addTextBox(HtmlControl control) {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue(control.getDescription());
        String desc =control.getDescription();
        desc=desc.replaceAll(" ", "_");
        outputText.setId(desc);
        outputText.setStyleClass("bodyText");
        HtmlInputText textField = new HtmlInputText();
        // textField.setId("textField_"+control.getId());
        textField.setId(control.getName()+"__"+control.getId());
        HtmlOutputText outputText1 = new HtmlOutputText();
        outputText1.setValue(" ");
        outputText1.setStyleClass("bodyText");
        textField.setStyleClass("frmObjects");
        gridPanel.setColumns(3);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(outputText1);
        gridPanel.getChildren().add(textField);
        parent.getChildren().add(gridPanel);
here is my after render response method
protected void afterRenderResponse() {
        //job_selection_templateRowSet.close();
        jiya_html_controlRowSet.close();
        FacesContext.getCurrentInstance().release();
here is my getValueBinding method
private ValueBinding getValueBinding(String expression) {
        return     FacesContext.getCurrentInstance().getApplication().createValueBinding(expression);
    }Thanks
Sudhakar.

Hi,
You can try the following to debug and provide us more details.
1. I am assuming you are trying to navigate by using a commandLink/Command Button ? If so, is the action handler for the command getting called ?
2. Do you have input components in the page with Validators/converters attached to them ? If so, you may not watch for validation/conversion errors. If there are errors, the same page will be redisplayed. In that case you would need to associate message component to get more details on what went wrong.
3. Have you set up the necessary navigation rules to navigate to the right page ?
4. When you are adding components programatically, its better to assign explicit id's to your components, to avoid any unexpected behavior.
Hope this helps.
Regards
-Jayashri

3D layers not rendering

Similar Messages

Maybe you are looking for