3D menu not in CS6 Final?

its not problem in my laptop drivers, or video card, because the 3D was working in all of CS5, CS6 PreReleased,and CS6 Beta, and was working perfectly,
after i installed Photoshop CS6 Final Extended MultiLanguage, i cant see it, i updated my intel video card and chips drivers, and still same.
if there is any informations u need, tell me.
thanks much

It's really amazing and disgusting that the malware writers out there have so much energy that they can have a hacked version of Photoshop already available to infect peoples' computers, even before the official release is made by Adobe.
-Noel

Similar Messages

Audition CS6 Help menu not working

I have downloaded Audition CS6. When I go to 'Help' i get error 10. Is there no help file with the trial?

Hi All,
I found this on the web and it works!
<http://forums.adobe.com/message/4417566#4417566> CS6 Help Menu Not Working
This does not apply to one application, but is a suite wide fix.
I had been running the CS6 Master Collection trial download version and the help menu, specifically the online "Help" and "Support Center" listed on the main help menu dropdowns of all applications within the suite, was not working, able to connect, or an error that the folder did not exist (apparently corrupted).
Once I just got the CS6 Master Collection (DVDs) I uninstalled the trials, then installed the hard copy version, with the normal reboot in between. The Help menus still did not work.
This is what I'm running. : Windows 7 Pro 64-bit
I called Adobe support and the following was my solution for both my desktop and netbook with this problem.
1.    Close all running Adobe applications.
2.    In the directory C:/Program Files (x86)/Adobe/ Delete the "Adobe Help" folder.
(C:Program Files (x86)/Adobe/Adobe Help/)
3.    Reboot
4.    Then go to Adobe.com/support/chc/   (this is the "community help center")
5.    Click under "Step 2" the "Install Now*" button.
6.    On one of the windows that open there is a Preferences drop down menu. Select the one that allows online help connection as well as local.
7.    Click "download" to begin the folder download. The downloaded folders are more than 1 GB for the CS6 Master Suite help files. Watch at the bottom left of the download window to see the small progress meter.
8.    Once done, reboot.
My CS6 Master Collection help menus throughout were fixed by completing the above.
Thanks Tom! ...at Adobe support for this fix procedure.
I hope this helps someone else out there.
This does not apply to one application, but is a suite wide fix.

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

I ask the third time:
How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
hope of feed back: e-mail: [email protected]

Chris Cox answered your question here:
I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

CHAPTER BUTTON NOT WORKING ON FINAL BD-DISC

Hello,
I read several posts here about chapter issues but none of them addressed exactly to my problem.
So I have my HD (blu-ray) project on Encore 5 and have set 8 chapter markers. Each one is linked to a menu button that works perfectly.
It`s a simple project and works fine on the preview. But not on the final disc when playing in the BD player.
The next button on the remote control does not works. It also shows chapter 1/1.
The end actions set on each chapter is a link to the next chapter. E.g - The end actions set to chapter 2 a links to chapter 3. Except to the last chapter that has no end actions set.
Am I doing something wrong?
I appreciate any helps!
Bruno

I'm not sure if this is a playlist.
I've just set the chapter markers on the timeline.
Anyway, Is possible to use chapters on Encore for BD discs and have them work on blu-ray player remote control?
Thanks!
Bruno

Following Media Files Are Not Optimized For Final Cut Pro

I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
Crayton

I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7
I just installed the new version of final cut pro 10 and the canon plugin-E1 version 1.4 for the canon 5D mk III but after starting final cut pro I can not find the Log and transfer button., with the result I cannot import my files.
Is there a solution for this problem.

There is no L&T function in FCPX.
The import media dialogue window does what you want.
OS versions later than 10.6 should be fine importing Canon DSLRs.
Russ

Application menu not showing in preference pane

Have brought some games for the iphone and ipod touch but have no application menu not showing in preference pane to upload them to to ipod touch. All software is current both itunes and ipod touch
Help would be very grateful,

If you go to Preferences, General you should be able to see the "Applications" check box, below "Audiobooks". Check the box, this will show the Applications icon in your library.
Message was edited by: googood

MENU NOT FOUND 66000-27

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report Basic 2008 for SAP Bsuiness One of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

Hi Kawish
Please visit the following link:
Activate menus Gross Profit
Hope this helps!!
Regards
Sourashree

Menu not found

Dear experts,
I am still not able to find any solution for the error of ''MENU NOT FOUND 66000-27" in "Manage Crystal Report"
The above error which I am getting if only in a particular company / database.
Regards,
Paolo

I have had the same problem for over 6 hrs now. So I decided to step through the source code. This is my finding.
The Problem is coming from this line in public bool FillSourceData()
sModuleString = AppObject.Menus.Item(Rs["ModuleUID"].ToString().Trim()).String;
This is because the reports being referenced in the database have been moved or deleted.
The fix is to wrap the content of the while (Rs.Read()) // Not (Rs.EOF) in a try... catch
Like this
while (Rs.Read()) // Not (Rs.EOF)
try
It now works OK.
Edited by: Olajide Aregbesola on Mar 25, 2010 5:00 AM

MENU NOT FOUND [ 66000-27] in Manage Crystal Report

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
Please note that earlier this menu used to open by which I used to add the reports but now for the last 4-5 days this menu is not opening.
Also would like to know in Account setup how to create ext table when the table already exist.
Regards,
Kawish

Hi,
I am still not able to find any solution for the error of ''MENU NOT FOUND [ 66000-27] in Manage Crystal Report''.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report 2008 of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

Context Menu not displayed in KM for users except Administrator

Hi Experts
Can you please suggest where the permission should be given in order to make context menu visible for users who are not super-administrators but are content admin?
We are facing issue with context menu not shown at all to the users.
Please suggest.
Regards
Shaily

Hi Shaily,
You may need to look into the permissions on your Layout set and Resource renderer in use.
This thread will help you navigate and do the required changes.
http://scn.sap.com/thread/99088
Thanks,
Biroj

The object R3MAIN in library *LIBL type *MENU not found.

Hello SAP Gurus,
Currently we are experiencing a log in issue in our dev AS400 server. Log in is successful but we are not able to proceed.
Checking the joblog, we found out that "The object R3MAIN in library *LIBL type *MENU not found" and we dont have any idea who change this settings. Can you assist how we can return the object R3MAIN and what is the exact library should we place it.
kharlos.

Hi TJ,
I would strongly suggest, to open an OSS ticket with BC-OP-AS4 as there are some more problems in the current BS7 SR1 upgrade kit. Only with such a message, SAP will be able to fix these issues.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

3D menu not in CS6 Final?

Similar Messages

Maybe you are looking for