3D Motion Tracking Error/Crash in progress [Urgent Help Please!]
Hey there!
I'm an video editor and I use 3D Motion Tracking a lot but recently every time I use it, it comes up with an error and says crash in progress,
It never used to do it and I can't seem to find any solutions to fix it.
Computer Specs:
Manufacturer: Toshiba
Model: Notebook
Processor: AMD E1-2100 APU with Radeon(TM) HD Graphics 1.00 GHz
Installed Memory: 4.00 GB (3.45 GB Usable)
System type: 64-bit Operating System, x64-based processor
So here's how I get to the problem. (I'll try provide as much detail as possible)
I import a mp4/avi file into After Effects,
Create a new composition with:
1280 x 720 (16:9)
Frame Rate = 30
Duration = 30 seconds
Resolution = Third
Advanced
Renderer = Classic 3D
(Boxes Underneath all unchecked)
Options:
Shadow Map Resolution = Comp Size
Motion Blur:
Shutter Angle = 180 Degrees
Shutter Phrase = -90 Degrees
Samples Per Frame = 16
Adaptive Sample Limit = 128
3. Drag the mp4/avi into the composition to use it. (1.21 Seconds Long)
4. Right click on it and go to Effect > Perspective > 3D Camera Tracker
5. The 3D Camera Tracker initializes with these settings:
Shot type = Fixed Angle of View
Show Track Points = 3D Solved
Track Point Size = 100.0%
Target Size = 100.0%
6. Loads Frames 0% > 100% then as soon as the orange line shows up with Solving camera it shows this,
and when I click okay it shows this,
and then finally this,
and then it crashes. that's the same process every time and it still comes up with this.
Help would be appreciated !
Thank you !
Try rendering an image sequence from your original footage then load that into AE and Camera Track the image sequence. Use the AME to or AE to render a JPEG or PNG image sequence:
It's important to know that some footage cannot be Camera Tracked. In order for camera tracking to work there must be a significant amount of fixed geometry in the scene. For example, if you have a shot of open water like this it cannot be Camera Tracked:
This shot also cannot be camera tracked successfully because most of the frame is moving:
If transcoding or converting the shot to an image sequence does not fix the problem and you don't get a frame rate mis match warning then you could have possibly not given enough memory to other applications in you memory and multi processor settings. Keep memory allocation for other apps in even numbers and make sure that you have not starved the dynamic link server that does camera tracking. If you have the memory 4GB to other apps is absolutely the minimum. If you only have 4GB then give 2 to AE and 2 to other apps.
Similar Messages
-
Crashing.. (URGENT HELP PLEASE)
Hey guys,
I had version 6.0.3 installed I then formated my computer, i resintalled everything and now I am up to installing iTunes, i install it and when I go to run it, the program crashes. It gives me the send error window. Why is this happening and can anyone help me please!?
oh and yes ive tried reinstalling, repairing etchi hawkers!
we're still on track.
Unhandled Exception
Error Number: 0x80040707
Description: DLL function call crashed: QTInstall.Code.QuickTimeUinstallProg
Setup will now terminate.
that's a known complication of a broken QuickTime. in this context, it usually means the installation configuration information of the QuickTime has been compromised.
here's what we'll try first.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
next use the QuickTime component of the following complete uninstall instructions as a guide to a manual removal of leftover QuickTime program files and folders.
once we've got all the existing QuickTime scraped away, let's try another careful standalone QT 7.0.4 reinstall.
does it go through properly this time? if so, does your itunes launch properly again?
love, b -
AE error: Crash in progress
My after effects cs6 takes too much time to start than yesterday and during loading it throws the error message,
'After effects error: Crash in progress. Last logged message was: <5316> <DynamicLink><5> C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6\dynamiclinkmanager.exe'
I am getting this message after deleting any previous preferences and uninstalling and re-installing the application.
System specs are:
Core i5-2500 3.3ghz
12GB ram
64-bit windows OS
No external graphics card
I am in the middle of my work on a short movie and need urgent help.
Thanks in advance.Hang| Initializing MediaCore | Startup screen | After Effects, Premiere Pro | CS5, CS5.5, CS6
And, if that's not it, fixing permissions problem that impedes start of Adobe applications
And, if that doesn't help, what version of Windows? What, exact, version of AE? (Is it 11.0.4 or is it an earlier version like 11.0.1?)
Posting the crash log might help too.
Can you think of what you did between it working correctly and no longer working? Have you downloaded any codec packs? Updated any software? Updated your OS? Updated or added any antivirus or anti-malware software? Etc. -
After Effects CS5.5 error: crash in progress last logged message was 3300 DynamicLink 5
Randomly when I start after effects CS5.5 and premiere pro CS5.5 I get the following error:
After effects error: crash in progress last logged message was <3300> <DynamicLink> <5> 000000001AAB2080
I have all programs updated.
PC Specs:
i7 930 @ 2.8GHz
12GB RAM
Nvidia GTX 570
Windows 7 Proffesional 64bit
Thanks in advance guys!What does "randomly" mean? What do you do, when the issue appears? Do you run games before? Use other programs? Also check the Event Viewer for the exact cause...
Mylenium -
After Effects error: Crash in progress.Last logged message was:<7748> <ae.blitpipe><2>Making New context ....how can i Fix it??help me!!place
Try the forum for After Effects.
-
Hi' i Update recently the new After Effects cc 2014 and i got this message : when i try to launch the program
After Effects error: Crash in progress. Last logged message was: <5640 GPUManager <2< Sniffer rResult Code:3
i update all graphics update and CUDA also.
i connect into my graphic card setting and its show the program open with the graphic card.
nothing change.
i also try to install adobe media encoder but the system shot down without any reason.
my computer is new (never install after effects before
PC-
WINDOWS 7 ULTIMATE 64Bit
I7 4790
DDR3 16GB
GTX760 2GB
SSD 240GB
I DON'T KNOW WHAT ELSE TO DO - PLEASE HELP ME!!
I BUY THE NEW COMPUTER FOR THIS PRODUCE.
PICTURE FOR DEMONSTRATE:It's the same as always: Update your graphics driver.
Mylenium -
after effects error:crash in progress.Last logged message was:<4344><GPUManager><2>Sniffer Result Code:3 What is this?
It's the same as always: Update your graphics driver.
Mylenium -
After Effects Error: Crash in Progress. Last Logged Message was: 2960
When I Quit Aftereffects I got this Error .,. Can Someone tell me how to resolve this .. I am Using Creative Suite 5 Master Collection
After Effects Error: Crash in Progress. Last Logged Message was: <2960> <ASL.ResourceUtils.GetLanguageIDFromRegistry<0> Unable to obtain the User 'Language' Registry key at: Software\Adove\AfterEffects\10.0\Defaulting to 'en_US'.INTEL XEON S5000XVN PROCESSOR E5410 @ 2.33GHz 2.33GHz
Installed Memory 4GB
System Type 64bit
GRAPHIC CARD
Nvidia Geforce GTX 285 -
After Effects error: Crash in progress
I 've jost got "After Effects error: Crash in progress. Last logged message was <2160> <ae.blitpipe> <2> rect t:0.000000 I:0.0000000 w:1374.00000 h:533.00000
This was rendering a 4K video (4096x2304) with H264 compression. I think I had around a GB of free virtual memory. Is it just that it needs more memory - do I just need to increase the virutal memory - would increasing it by a GB or so fix it? It's currently 3616 MB.
Current PC:
After Effects CS4
Windows Vista
4 GB RAM
3616 MB page file (according to performance options).Is it just that it needs more memory - do I just need to increase the virutal memory - would increasing it by a GB or so fix it?
No. Not at all. The error is prety clear, actually:
w:1374.00000 h:533.00000
These are not valid dimensions for any MPEG-based output, since they need to be multiples of 2,4,8,16 and so on. Now I'm sure you set up the actual render correctly, but that info is coming from somewhere, so check if not a specific plug-in is causing this or your source footage may be damaged...
Mylenium -
After Effects error: Crash in progress. Last logged message was
Witam nie moge otworzyc After effects poniewaz otrzymuje blad After Effects error: Crash in progress. Last logged message was: <2080> <GPUManager> <2> Sniffer Result Code: 3 po kliknieciu ok otrzymuje komunikat ze program after effects przestal dzialac, mam zainstalowana najnowsza aktualizacje. Windows 7. prosze o pomoc
Do you have Windows Service 7 Pack 1 installed? If not, do so.
-
When i load ae i get this after effects error crash in progress last logged message was
after effects error crash in progress last logged message was 420
dynamiclink 5 c/program files x86 common
files/adobe/dynamiclink/cs6/dynamiclinkmanager.exe
i am using a acer laptop 64bit running windows 8 any help would be great thankscrashingHas After Effects worked before? If it's worked before, what changed between then and now? Have you installed something or updated something?
What is the exact version number of your After Effects? And before you say, "CS6", I mean the exact version number, such as 11.0.4
What are the specs of your machine?
And any other information you think might be useful to know. -
Hi
I have one question.
I was Install after effect, but I saw the this message in my PC.
please let know solution.
After Effects error : Crash in progress.Last logged message was:
<4444><GPUManger><2>Sniffer Result Code:3
My system info
cpu :i7
graphic card : gtx 750 Ti
ram:16GStandard answer: Update your graphics driver and configure it suitably.
Mylenium -
Affter Effect error crash in progress last logged message was 4888 DynamicLink 5
Everytime I start affter effect I get the following error (affter effect error crash in progress last logged message was <4888> <DynamicLink> <5>)
I have tried uninstalling affter effect and did an online search but have found no answers.
Can anybody enlighten me or give some suggestions on how I might solve this problem.
Thank you in advanceI had the same problem for months.
I changed my whole pc, mouse, keyboard, monitor, including the OS, version of adobe pack, everything except one thing ...
-> A Genius 8x6 tablet
I never would have thought, until I disconnected and error magically disappeared.
Someone explain to me how this element can cause such a big mistake.
I think the error is caused in the Windows registry.
yo tuve el mismo problema durante meses.
cambié de pc entera, mouse, teclado, monitor, incluso el OS, la versión del pack adobe, todo menos una sola cosa...
una tableta 8x6 genius
nunca me lo hubiera imaginado, hasta que la desconecté y el error desapareció magicamente.
que alguien me explique como este elemento, puede provocar un error tan grande.
creo que el error se ocasiona en el registro de windows. -
Error: Crash in progress 2524 unconstrain fpsif appropriate
Hi All,
I've been searching the help forums but have been unsuccessful in finding the same error that I have been getting and a possible solution.
This is the error I get:
AE error: Crash in progress. Last logged message was <2524><unconstrainFPSifAppropriate><5> setting ADBE Video FPS constraint off.
What does this mean and how can I resolve it?
I am working on an HPZ600 workstation, running windows, using After Effects CS5.
Thanks in advanced for your help and timeI'm having similar problems using Red Giant's Shine in CS5 10.0.1 on a Mac Pro running 10.6.6
Source footage is from a Canon 7D shot against a green screen at 60 fps.
Next step is Keylight and rendered out at 60 fps.
These clips are then changed to 30 fps using the Interpret Footage dialogue panel and imported into a 30 fps comp.
Problems seem to come when animating the "source Point" in Shine.
Sometimes After Effects crashes and reports: <unconstrainFPSifAppropriate><5> setting ADBE Video FPS constraint off.
Other times it just hangs with the spinning beachball and I have to force quit.
It may be coincidental but the problems seem to be happening since I tried to update to 10.0.2 using the retail update.
This updater did not complete and Adobe Application Manager gave the following dialogue:
"Some updates failed to install.
Update is not applicable".
As yet I have had no response to a post I made regarding the update problem on this forum 4 days ago or from a bug report sent to tech support.
I've tried trashing the preferences but that hasn't fixed the problem.
Any help would be appreciated.
thanks
Pip -
Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?
its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed
Maybe you are looking for
-
Safari doesn't open website fully unless CMD R (force refresh)
Hello Everyone, Headteacher isn't happy that for some reason Safari will not open images at the top of this website unless I hit CMD R. Doesn't work with the normal refresh/reload button. It works fine in Chrome and Firefox. Site is http://www.lowe
-
Windows 8 laptop not recognising iPod Touch
Hi, I have an old 2nd gen ipod touch and a 5th gen, I bought a new laptop a few months ago and neither iPod works with it. When I connect via USB it is recognised on my computer as an external storage device, but it doesn't register with iTunes at al
-
How to know stat file retention setting
Hi, Wanted know where & which table or function module or report will give me stat file data retention period i have this function module "SAPWL_STATREC_READ_FILE" which read the data from stat file now want to know how will i get the setting for how
-
Why does my archivelog RMAN backups end up in ORACLE_HOME/dbs ?
DB version: 11.2 Platform: Solaris 10 I have noticed that , rman backup pieces containing archivelogs end up in $ORACLE_HOME/dbs directory despite using format parameter. This happened for both Level 0 AND Level 1 backups. I know that backup files en
-
This is a strange one that i've only just noticed since installing Snow Leopard: In Logic when looking for audio tracks via the media browser, I select a file and drag and drop it into a project. The file plays back in the project as expected, but...