3d open, square tank control for SCADA HMI

I am in need of a 3d tank control(basically a cube) for a DSC app and cannot find one anywhere that is both open and square. I've had limited success with the control editor and thought I would ask around before developing an ActiveX control. Any suggestions?
ST

At present, we do not have a 3d tank control that is both open and square. You will probably need to create an Active X control, unless you can find one on the web that was created by another company.
Sincerely,
Green Rives
National Instruments
Applications Engineer

Similar Messages

  • How to maintain open change request control for the transaction MM02 & CS02

    hi all...
    can any one please let me know that, is there any BADI or Enhancement spot
    where i can code for my desired functionality...
    how to maintain open change request control for the transaction MM02 and CS02.
    Desired Functionality:
    • The user wants to maintain a material, bill of material or a document.
    • On the initial screen of the respective transaction (MM02, CS02)
      user enters a change request number.
    • The system checks whether the object record that the user wants to maintain
      is already assigned to other change request numbers.
    • If this is the case, the system displays a warning, stating that there are
      other open change requests for this master data record.
    • In addition, the system lists the relevant change request numbers.
    • The user can continue the maintenance or leave the transaction and first check
      the mentioned change requests.

    hi satish thanks for reverting back
    but sorry yaar given enhancement is not triggering...
    but my requirement is:
    - after executing the transaction MM02 & CS02.
    - user inputs the data for Material Number and then he enters the Change Number.
    - if the given Change Number is not maintained with the Material (i dont no
      where/how this two fields are maintained internally), then it has to raise a
      warning and it should list the existing Change Numbers for that perticular
      Material.

  • I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again.  I can't uninstall as it isn't present in control panel

    I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again.  I can't uninstall as it isn't present in control panel.  When I open properties it asks to locate the exe or the other options don't work the target is invalid

    Hi sambanyc,
    What version of Adobe Reader have you installed on your Mac?
    Please try installing on a different Admin user account and check if that makes a difference.
    Regards,
    Rave

  • Brewery tank controls

    Hello all -
    I'm looking to develop a system for controlling the Fermentation tanks
    in our brewery using LabView controls.  We currently use the standard
    tempermental fuzzy logic PID microcontrolers (Partlow, Watlow, etc).  I
    believe these are overly expensive for the functionality they provide,
    and being a both a professional Brewer and a LabView/systems guy I am
    always seeking better ways to control the process.  Programatically, I
    realize all the flexible advantages LabView would have for our system,
    however I'm evaluating the feasibility ( on a cost basis) of replacing
    these with a custom LabView controlled system.
    Our current process:  A type K thermocouple monitors the tank
    temperature via the fuzzy logic controller.  The controller's alarm
    relay (rated 5 amps at 110 VAC) responds based on a setpoint and will
    either send coolant thru the jacketed tank or not. The controller alarm
    relay activates a seperate solid state relay (20 mA) which then sends
    an electrical signal to a circulating pump (single phase, 115 Volt,
    ranging 0.5-2.0 amps) and a solenoid valve (120 Volt coil) with their
    own power sources. 
    We currently use this system as an on/off controller.  The tanks are
    either cooling or not - and control beyond that is manual.  I realize
    that soaking, ramping, and other functions can be set with these
    controllers but not only do we have numerous controller brands with
    different parameters, but the programming is beyond the scope of many
    of the people that operate the system.  I'm looking to build in user
    friendly functionality and operate all the tank controls from one
    central computer hub.
    So the question is, how do I replace the controllers and wire for
    LabView control of the motors and solenoids?  Is the solution to just
    run wires to a big Data Acquisition board connected to a central computer? Or
    is building a wireless network of tanks feasible? (My budget will be
    relatively small)  We've got 14 tanks to control spaced evenly over
    about 4,000 sq. ft. Any idea's, experience, hardware suggestions, etc. - I'd love
    to hear.  Thanks in advance for all your help!
    - John Rehm
    Brewer in Chief, Philadelphia Brewing Co.
    LabView Instructor, La Salle University
    From McMaster Carr supply (www.mcmastercarr.com):
    Autotuning P-I-D Temperature Controllers
     1/16 DIN
       These
    autotuning controllers with fuzzy logic calculate the optimal P-I-D
    (Proportional-Integral-Derivative) parameters for a particular process
    and store them in memory for future use. Controllers accept input from
    RTDs and thermocouple types J (-58° to +1832°  F/-50° to +1000°  C), K
    (-58° to +2498°  F/-50° to +1370°  C), and T (-454° to
    +752°  F/-270° to +400°  C). Units are easy to program using menu and
    keypad. Each has selectable auto/manual control modes, two limit alarm
    relays with eight programmable modes, and ramp/soak programming ("ramp"
    for length of time to reach a temperature and "soak" for length of time
    a temperature is maintained).
       Controllers are ° F/° C selectable,
    and dual LED displays show present temperature and setpoint
    simultaneously. Top LED is red, and bottom LED is green. Units accept
    probes with bare lead wires (probes sold separately).
    Operate on 90 to 264 VAC. All include screw terminal connections and
    mounting brackets. Accuracy is ±0.36°  F (±0.2°  C) for RTDs and
    ±1.8°  F (±1°  C) for thermocouples. CE approved.
        1/16 DIN size units have one control and two alarm relays with SPST contacts that are wired normally open and rated 5 amps at 110 VAC. Top LED is  3/8" high, and bottom LED is  5/16" high.
        1/4 DIN size units have two control and two alarm relays with SPST contacts that are wired normally open and rated 5 amps at 110 VAC. Top LED is  9/16" high, and bottom LED is  3/8" high.

    Hi John.  A couple of suggestions:
    1) If there is any way to remotely program your existing controllers, building your system on them may
    have several advantages.  Lets you use your existing hardware and wiring, reduces new stuff to buy,
    and gives you a fall-back position if problems crop up with the master controller.  Also can be
    implemented in stages, a few tanks at a time.
    2) Replacing your existing controllers with remotely programmable ones still gives you the other advantages
    of the architecture above, just you have to buy new controllers.
    3) Fieldpoint hardware is certainly capable of doing what you want, and gives you independence from
    a PC, i.e. you can download your process parameters to the Fieldpoint controller and disconnect the
    PC, or leave it running as a monitor.  Gives you the reliability of an industrial controller with the option
    of a PC GUI.  You could run all 14 tanks with one controller.
    For a 4000 ft^2 facility, I wouldn't expect wireless to be worth the trouble unless there are other
    considerations like mobile equipment.
    I am in Jenkintown.  I'd be happy to trade tips for a tour.  Are you involved with the ISBT program?
    Matt

  • Can i use subfolders with source control for developer ?

    We'd like to use the repository as source control for our developer files.
    We planned to use the following structure in the repository:
    - Application Container
    - Folder
    - Files
    We uploaded the files in the repository.
    Now if we open the file through the ron the file will open in form builder, which is pretty good.
    The following thing I'de like to do is a checkout of the file ... ok ...i'm going to file - administration - checkout - the message occurs: no versionable object exists ! ... ? :-(.
    So I go to file - administration - source control options .. i'd like to say forms that it has to look for the file in a subfolder of the application system .. ok.
    After changing this i try again - the same message.
    If I return to source control options the container entry has been changed to the application folder.
    Are Subfolders not supported by the source control for developer ?
    Does anybody have the same effects ?
    Background informations ?
    Thanks in advance
    Mario
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by [email protected]:
    Did you check the file in first? When you first put files in Repository, they are initially unversioned until the first checkin...
    Brian<HR></BLOCKQUOTE>
    Hello Brian
    Sorry, for the delay. I worked for some day for another customer.
    Yes, i did.
    I'm working like this:
    - upload file with check in Folder which is under an application Folder (app - fmb )
    - then i check out the fmb in the repository
    - doubleclick in repository, which opens the form in form builder
    - change the file
    - File - Administration - check-in - connect to repository - choosing the workarea - and defining the folder (app - fmb ).
    - The file will be check-in, but directly under the folder app.
    Thanks in advance
    Mario
    null

  • Item Open Interface giving error for Org Assignment

    We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
    We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
    The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
    Any pointers for quick resolution ?

    Pl do not post duplicates - Item Open Interface giving error for Org Assignment

  • How do I set up timed access control for a time past midnight

    I would like to set up timed access control for a number of my devices that would stretch past midnight...   An open network from 6AM to 2AM - effectively only blocking access from 2AM tp 6AM in the morning....
    Any notion on how to do this?  the timed factily does not like the setting to enable 6A to 2A, says the times are invalid. 
    Setting up timed access from 6AM to 11:59P, then doing another from 12A to 2A causes a service "hiccup" of 1 Minute.

    Set up each device as follows:
    Everyday........Between.......6:00 AM and 11:59 PM
    Add a second rule for each device that will state....
    Everyday.....Between.......12:00 AM and 2:00 AM
    You might think that there would be a one minute break between 11:59 PM and 12:00 AM, but that will not be the case, at least on every AirPort that I have ever programmed..  Reason.....11:59 is really 11:59:59:59 turning off at 12:00 AM.  But, you have a second rule to allow access at 12:00 AM, so the AirPort will be "on" at the same time the first rule ends, so there will be no break.
    If you really want the second rule to turn the AirPort "off" at 2:00 AM.......then set that time for 1:59 AM. If you set the rule for 2:00 AM, then AirPort will really turn off at 2:01 AM.

  • "the activex control for flash player could not be registered" - Solutions Roundup

    I recently ran into this problem on my computer:
    http://at32.s3.amazonaws.com/flash_install_problems2.jpg
    I am a Flash developer (as in I write SWFs, I don't work for Adobe).  and when I updated IE to 10.2, "the activex control for flash player could not be registered".  Since I am a developer, I also have Firefox and Chrome installed, with Flash running without problems.  For a long time now, Internet Explorer has used a different version (ActiveX) to the other browsers, which use plugins.  I am a strong supporter of Flash, it's great to develop with and has a very wide feature set which is growing all the time, unlike fixed technologies/standards.  However, the weakest part is the install process - I don't understand why their is a Download Manager.  Google Chrome does it's best (so far) by managing the install/update process entirely in the background.  Anyway, it was in my best interest to try and get to the bottom of this.
    For the record, on the problem machine I have Windows 7 with IE8, but I have seen almost  identical symptoms with IE9, Windows XP SP3, as well as various  iterations of Flash Player (10.0, 10.1, 10.2 and even some final  editions of version 9).
    First I tried the standard support here:
    http://kb2.adobe.com/cps/191/tn_19166.html
    Basically, doing the manual uninstall and manual install of the latest version (without using the download manager, or have IE open).  This did not work.  I also tried the Microsoft "subinacl" program, together with "reset_fp10.bat".  This didn't work either.  However, you should try all of these things first before progressing further.
    A quick note about people who had tried running the following at a command prompt: "secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose"
    I didn't do this, because on investigating further it didn't seem to work with Windows 7, only Windows XP, Windows 2000 or Windows 2003 - though there was a few threads where this had fixed the problem for some users.
    For my solution, it is recommended you use the manual uninstall / installers, so you should have them downloaded ready to use.
    I then heard about problems with permissions in the registry with the key: HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
    So I opened regedit.exe (start - run - typed "regedit.exe"), navigated to the key and sure enough, I couldn't open it - permission denied - even though I had an administrator account.  If for some reason, you can access this key (and any subkeys), then it's likely the following fix will not resolve the problem.
    I then done further diagnosis, by using Process Monitor to try and install Flash Player, and I got the following:
    http://at32.s3.amazonaws.com/flash_install_problems.gif
    This shows all the access denied errors the Flash Player install was experiencing when trying to write to the registry key.  This confirmed that this was the problem.  I only stress this because several people said it was unwise to tinker with the registry.  Though this is common advice, this is the only known fix for this precise problem at present, since you need to manually adjust the permissions yourself.  I don't know who is at fault here - Microsoft or Adobe - but let's just get Flash fixed...
    The solution:
    Firstly, you may want to backup your registry, or the exact key.  I didn't do this so I've provided no instructions on how to, but it is recommended for the paranoid.  Also make sure as much software is closed down as possible - browsers, IM software, any junk in your system tray. As way of example, I happened to have "BBC iPlayer" installed and running in the background which uses Adobe AIR and Flash Player, so I exited that too.
    1) Open regedit (start - run - type "regedit.exe").  You may need to right click on it and select "Run As Administrator", but I didn't as my account was already administrator.
    2) Navigate to the key. HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
    Click on it to confirm that you cannot access it (you will get an error) - if their are no problems - this probably isn't the cause of your issues.
    3) Right click on it and click Permissions, and ignore any message that may pop up.
    4) Under "Group or Usernames" click "Add".  Type your account name name, or "Administrators" in the box, then "Check Names" to format it correctly, then Ok.
    5) Now on the next screen click the checkbox to enable Full Control (this will also automatically enable "Read" permission too).
    6) Click Advanced, then the "Owner" tab at the top.  You will see that their is no "Current Owner".  This is what we will now fix.
    7) Click on your name to change the owner to (I went for Administrators).  Also enable the checkbox entitled "Replace Owner on subcontainers and objects".  Then click Ok.  You will get an error message, which you can try clicking Retry to, but hit Cancel - this is not a problem.
    8) Click Ok a couple of times and this part of your registry is now fixed.
    9) Now it's a simple case of running the manual Flash uninstall program, then finally the manual Flash installer (for Active X - not the Firefox/Chrome plugin versions).  To my surprise, after a couple of days looking into this - I finally had a solution and Flash in IE once more.  If you are using Firefox too you may find Flash is no longer installed their (the uninstaller removed it).  In this case just install via the Adobe site or try to watch a video on You Tube and you will be prompted or linked to the install.
    Hope this provides a good round up of the possible solutions to this problem.  Hopefully Microsoft or Adobe can find out what causes this issue in the first place so we don't have to go down this route for much longer.  Chrome's implementation of Flash shows how effortlessly things can work!

    They will stay on the screen.  However, Process Monitor is only intended for advanced users.  It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error.  This is far easier than trying to use Process Monitor, which is very complicated.
    I used Process Monitor to confirm that it was just that key which was causing the problem, and not others.  Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista).  If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
    http://technet.microsoft.com/en-us/sysinternals/bb896645
    It replaces the older Sysinternals "FileMon" and "RegMon".  For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot.  First of all to just show Registry events.  Then to just show events from the manual Flash activeX installer executable.  The I added a filter to show only non-successfull results.  And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess.   When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
    Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable.  e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

  • Volume control for video playback through Apple TV2

    I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
    I am using the apple remote app on my iphone to control the apple tv.
    Whats working:
    Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
    Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider.  Not as cool as using the hard +/- buttons but still works.
    Whats not working:
    Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
    Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
    Is there a setting that can be changed or a solution I havent found?
    Thanks

    Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
    I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
    HDMI 1 is connected to the satellite settop box with its  own remote control ( channel +/-, volume +/- etc. ) it work s fine.
    HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
    HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
    What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
    I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
    How can we help Apple to open the volume +/- function on their own remote control ?

  • ActiveX control for Flash Player could not be registered - no solutions work

    I am getting the "ActiveX control for Flash Player could not be registered" when I try to install 11 on IE9 (Windows 7 64-bit).  I have tried everything that has been suggested in other posts and forums to no avail.  This is driving me crazy and hindering me from work.  Can someone please help?  Thank you!

    I just had this issue and have been searching and searching for a way to fix this issue. I have a Windows 7 64 bit system and this was happening with IE 9. But I have found the solution.
    Go to http://kb2.adobe.com/cps/494/cpsid_49419.html and follow these instructions. This worked for my system and I was able top install the newest flash with no problems.
    Make sure you are logged into a Windows Administrator account. If you are not, you will not be able to use SubInACL.
    Download SubInACL from the Microsoft Download Center.
    Follow the installation instructions. Make sure you install SubInACL (subinacl.exe) to the directory C:\Program Files\Windows Resource Kits\Tools.
    Download the reset_fp10.zip file.
    Open the fp10.zip file and extract the reset_fp10.cmd file to the directory C:\Program Files\Windows Resource Kits\Tools\.
    Both this file and SubInACL (subinacl.exe) must be in this directory.
    Double-click reset_fp10.cmd. A command window will open, and SubInACL will run.
    Do not use the machine while SubInACL is running.
    After SubInACL finishes, you will see a prompt "Press any key to continue".
    Install Flash Player from the Flash Player download page.
    To confirm that your installation succeeded, visit the About Flash Player page. At the top of the screen, you should see a message that reads "Adobe Flash Player Successfully Installed."

  • Lenovo Miix 2 8" - Separating volume controls for headphones and speakers

    The sound options for the Miix 2 out the box combine the volume control for internal speakers and for headphone jack, i.e. there is only one volume control for both the speakers and the headphones on the mixer settings at the the volume icon at the lower right hand of the desktop.  So when headphones are plugged in, there is still only a "speakers" control shown.
    I work in an office and would like to have the speakers muted if the headphones are pulled out.
    Similar issues resolved on other devices directed to install an alternate sound driver (that offered separate controls) or pointed to some other settings in the sound driver properties menus where this could be manually done, but I'm having trouble applying any of them to this device. 

    Worked beautifully! Thank you very much!!
    nyxacith wrote:
    Tried it reverting to an older version of Skype.  Didn't work.
    But!  I believe I may have found the solution.
    Here are the steps I took to solve the issue:
    1. Right click on the audio volume control icon -> Playback devices.  The Sound window and Playback tab should be open.
    2. Set Speakers/HP as both the Default Device and the Default Communications Device.
    3. Go to Skype>Tools>Audio Settings.  Set Speakers settings to: Speakers/HP (IDT High Audio Definition CODEC).
    Hopefully this will work for anyone else who has the same or a similar problem.

  • Acrobat Control for ActiveX

    How can we open a PDF in Acrobat Control for ActiveX using API AcroExch.AVDoc

    You have described two different APIs. Which one do you want to use?
    If you feel you have a need for both, please say why, because this is
    a major problem.
    Aandi Inston

  • ORA-00210: cannot open the specified control file

    Hi all,
    Initially we faced the following error:
    ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
    75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
    version 75645
    Then the following action:
    RMAN> restore controlfile from autobackup;
    Starting restore at 05-DEC-07
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=997 devtype=DISK
    recovery area destination: +flashdg
    database name (or database unique name) used for search: DWS
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
    channel ORA_DISK_1: control file restore from autobackup complete
    output filename=+DBDG/dws/controlfile/current.256.638648487
    output filename=+FLASHDG/dws/controlfile/current.256.638648489
    Finished restore at 05-DEC-07
    RMAN> recover database;
    Starting recover at 05-DEC-07
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 12/05/2007 15:16:10
    ORA-00210: cannot open the specified control file
    RMAN>
    Any idea why this is happening?
    Regards,
    Soma Sekhar Karri

    Something which you should have looked up prior to posting
    00210, 00000, "cannot open the specified controlfile"
    // *Cause:  Cannot open the controlfile.
    // *Action: Check to make sure the controlfile exists and is not locked by
    // some other program.
    Sybrand Bakker
    Senior Oracle DBA

  • Actions ignoring modal control for layer renaming, Photoshop CS6

    Hey, everyone! I often run actions that have modal control for certain steps turned on, in particular, when I want to give a layer a custom name. Prior to CS6, I'd run my action, the window would open allowing me to rename my layer, and then it finishes my action. However, in CS6, it seems to ignore the modal control button selected, puts in whatever the default info is and continues on. This hoses quite a few of my actions that I've been using for years. Submit a bug report?
    Thanks,
    Bruce

    Bruce it looks like you found yet an other bug in CS6 please report it at http://feedback.photoshop.com/photoshop_familyhttp://feedback.photoshop.com/photoshop_family
    Set current Layer name fials to display its dialog when step is set to display dialog.

  • Firewall software & using a remote control for AirTunes?

    I recently turned on the built-in firewall on my MacBook Pro. Ever since doing so, every time a run iTunes, get the following message:
    Your computer is using firewall software that prevents
    you from using a remote control for AirTunes.
    To use a remote control for AirTunes, open System Preferences, click
    Sharing, then click Firewall, and select "iTunes Music Sharing."
    I always tell it to "Ignore" and I am able to play music through my AirPort Express without any trouble. What is the "remote control" to which this message is referring? I have searched Apple's support pages and this forum without any luck. I thought that opening the "iTunes Music Sharing" port in the firewall would allow other people on my local network to see my music if I was sharing it, which I am not. I don't see what this has to do with a remote control.
    Thank you for any info you can provide.
    -- Gary

    Hi,
    there is no remote control for AirPortExpress or Air Tunes. Maybe we will see something like this in the futue, who knows.
    As AirTunes uses streaming, it probabely needs the same port open as Music Sharing. Because shared music is streamed too.

Maybe you are looking for