3D playback is not working

I recently upgraded my 80 GB SSD C-drive to a 500 GB SSD on my 17 inch Envy 3090NR laptop. After installing the Windows 7 operating system I re-installed the Cyberlink Power DVD 10 OEM software from the HP support site, however I cannot get Power DVD 10 to play in the 3D mode at all.
Any ideas why this is happening and what I can do to fix the problem will be greatly appreciated.
Thanks in advance :-)
Dan

Hello @Pilot-Dan,
Welcome to the HP Support Forums!
I see that you are having trouble playing movies in 3D mode on your notebook. I assume that it was working prior to your upgrade and reinstallation of windows., correct me if I am wrong.
After doing your upgrades did you also make sure to reinstall or upgrade to the correct drivers from the support page for your notebook? If not you can look for them here:  HP ENVY 17-3090nr 3D Edition Notebook PC Drivers
Otherwise you can take a look at this and it may help.
Resolving DVD and Blu-ray Movie Problems (Windows 7)
Were you getting any errors at all, or other similar performance problems?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • Premiere Pro CC Source and Program Playback Controls not working.. help please.

    Hi,
    Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
    Thank you,
    Mauro

    Dear Mark,
    Thank you for the hint/link, reseting the toolbar did the trick.
    Regards,
    Mauro

  • Captivate 7 event video playback controls not working

    Hi,
    I'm using Captivate 7 and published an mp4 event video with limited playback controls (only play, pause, back, and close) on the slide, since the event video controls won't show up once published. When I publish the HTML5 video (with or without seamless tabbing) the controls are not working. When I click play the video plays and I can pause it, but when I want to continue play, the controls are not working.
    I tried only to use the skins (clear, corona, and halo) given with the event video, but then I can't pause the video at all, since the controls are not showing.
    We need the video to play in HTML5 mode for iPads and computers, but we're at a loss with the controls. The video has got to be limited to only play, pause, back, and close - no scrubbing or forwarding. Any ideas?
    Thanks,
    Nat

    I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
    Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
    Here is the skin I have used for that in the Captivate editor.
    The best way to test these outputs is from a webserver or SCORM Cloud.
    Sreekanth

  • Playback button not working

    So the playback button is not working and the only time it starts working is after an update.
    What is wrong with it and how can I fix it?

    Welcome to our community, Angie
    It probably has to do with exactly how the Captivate content
    is being viewed. For example, the button may not work for you if
    you are simply running the project from Preview mode in the
    browser. But if you are running from a link that opens a new
    window, it may close without issue.
    The bottom line here is that you probably need to investigate
    and compare exactly how you are opening or launching the Captivate.
    Cheers... Rick

  • Pause FMR recording and video playback capture not working??

    Hello!
    I'm trying to record full motion recording in CAPTIVATE, but the PAUSE feature looks like it is not working for me. I even tried to modify the shortcut key, but nothing works. Anybody else have this trouble or am I missing something obvius here?? I thought that maybe the FMR mode cannot be PAUSED, but nothing on that matter can be found in the manual.
    Also, I'm trying to produce e-learning content for PREMIERE and SOUNDBOOTH. I've noticed that video playback within PREMIERE is not captured by CAPTIVATE. I've seen on the forum that others had this issue. Is version 5 of captivate behaving the same? Is it still not possible to capture onscreen video playback?
    Any info here would be greatly appreciated.
    Thanks!

    I'm having the same problem where Captivate 5 in FMR doesn't respond to the Pause key, however I'm noticing that there hasn't been a solution supplied here.
    Is there another location/forum where Adobe representatives for Captivate are actively monitoring questions and problems for this product?
    -- Sam

  • Cross browser testing : Modifier Keys playback actions not working in chrome and Firefox

    Hi,
    In my work flow I have to select multiple items in list.So I have recorded 'Ctrl+Click' action to select list items.In Chrome and Firefox it is not selecting multiple Items.
    Even Ctrl+A,Ctrl+C,Ctrl+V also not working in chrome and Firefox.Complete modifier keys support is not observed in chrome and Firefox.Let me Know how to automate modifier keys actions in cross browser?
    Regards,
    Nagasree.

    Hi Nagasree,
    Welcome to MSDN forums.
    First,please make sure the Chrome and Firefox is supported by cross browser testing.
    Latest version of Chrome and Firefox supported by cross browser testing are Chrome version 38.0.2125.111 and
    Firefox 33.
    I doubt whether Chrome and Firefox in cross browser testing don’t support automating modifier keys or there is anything wrong on it if you are using supported browser. Since this issue is related to the Extensions tool
    Selenium components for Coded UI Cross Browser Testing, if possible, I suggest you post this
    issue here, click “Q AND A”, and then you could post this issue there, you would get dedicated
    support there.
    Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Seek or start playback offset not working on big flv's

    Hello,
    I try to start a FLV (created with soundbooth cs5) at a certain point of time using ns.play('video', 33000) or even just ns.seek(33000);
    The FLV is about 9 hours long.
    How do I make this work ? And why is it not working?

    Do you face problem with all big flv files or just few set of files? Is it possible for you to pass on that files so that we can check at our end? But before you that - which version of FMS and Flash Player version are you on?

  • Playback is not working in OpenScript for loadtesting web/http wizard

    hi gems...
    i am facing another issue with OATS 12.1.0.1 while playing back the recorded scripts for load testing. But this time i dont know whether the remedy will come from our application or from OATS.
    I have recorded some simple steps in our application for loadtesting.
    My navigations in OpenScript:
    New > Load Testing(Protocol Automation) > Web/HTTP > Default Repository > Opened a blank script > started recording > Browser window got opened > hit the url of our application > logged in with a username/pasword > logged out.
    Scripts got recorded successfully. Now when i started playback, then it got failed with the error:
    +Failed to solve variable web.input.Submit using path .//input[@name='Submit']/@value+
    In our application, every sessionid gets captured and may be because of that recorded script and playback script made two different sessionids for login.
    Because when i did the comparison between the recorded and playback script, then i got the below line which is not matched between those two:
    +<form method="POST" id="formLogin" name="formLogin" action="/wm/j_spring_security_check;jsessionid=C9D732999E78008EC5CB3B77A6B703A4" onsubmit="return validateForm(this)">+
    jsessionid value is not matched between the recorded script and playback script.
    But when i did functional/regression testing of the same, then it worked perfectly without any failure.
    Kindly give your views. Thanks in advance.
    Edited by: gogol on May 23, 2012 12:44 AM

    below is the java code for the run block generated while recording:
    public void run() throws Exception {
              http.get(2, "http://ulx098.mazitek.com:8080/escort", null, null, true,
                        "ISO8859_1", "ISO8859_1");
                   http.solve("http.jsessionid", "jsessionid=(.+?)(?:\"|&)", "", true,
                             Source.Html, 0, EncodeOptions.None);
                   http.solveXPath("web.input.Submit",
                             ".//INPUT[@name='Submit']/@value", "Sign In", 0,
                             EncodeOptions.None);
                   http.solveXPath("web.input.strutstokenname",
                             ".//INPUT[@name='struts.token.name']/@value",
                             "struts.token", 0, EncodeOptions.None);
                   http.solveXPath("web.input.strutstoken",
                             ".//INPUT[@name='struts.token']/@value",
                             "G6CH0685ZPGKE6TUQUQRDES62AZRAT8J", 0, EncodeOptions.None);
                   http.solveRefererHeader("referer.httpulx098mazitekcom808_1",
                             "/escort/");
              http.get(9, "http://ulx098.mazitek.com:8080/favicon.ico", null,
                        null, true, "GB18030", "GB18030");
              http
                        .post(
                                  13,
                                  "http://ulx098.mazitek.com:8080/wm/j_spring_security_check;jsessionid={{http.jsessionid,9098A5983C686471BE1D2FCD7295CF40}}",
                                  null,
                                  http
                                            .postdata(
                                                      http.param("j_username", "escortadmin1"),
                                                      http
                                                                .param("j_password",
                                                                          "70300886ea87fade932332926317f269598827246763436004b79e4f16c60813"),
                                                      http.param("Submit",
                                                                "{{web.input.Submit,Sign In}}"),
                                                      http
                                                                .param("struts.token.name",
                                                                          "{{web.input.strutstokenname,struts.token}}"),
                                                      http
                                                                .param("struts.token",
                                                                          "{{web.input.strutstoken,G6CH0685ZPGKE6TUQUQRDES62AZRAT8J}}")),
                                  http
                                            .headers(http
                                                      .header(
                                                                "Referer",
                                                                "http://ulx098.mazitek.com:8080{{referer.httpulx098mazitekcom808_1,/escort/}}",
                                                                Header.HeaderAction.Modify)),
                                  true, "ISO8859_1", "ISO8859_1");
                   http.solveXPath("web.link.Logout", ".//A[@title='Logout']/@href",
                             "logout.jsp?logoutToken=0.5167720505173382", 0,
                             EncodeOptions.None);
                   http.solveRefererHeader("referer.httpulx098mazitekcom808_5",
                             "/wm/globalLandingPoint.action");
              http.get(21, "http://ulx098.mazitek.com:8080/favicon.ico", null,
                        null, true, "GB18030", "GB18030");
              http
                        .get(
                                  25,
                                  "http://ulx098.mazitek.com:8080/escort/{{web.link.Logout,logout.jsp?logoutToken=0.5167720505173382}}",
                                  null,
                                  http
                                            .headers(http
                                                      .header(
                                                                "Referer",
                                                                "http://ulx098.mazitek.com:8080{{referer.httpulx098mazitekcom808_5,/wm/globalLandingPoint.action}}",
                                                                Header.HeaderAction.Modify)),
                                  true, "ISO8859_1", "ISO8859_1");
              http.get(31, "http://ulx098.mazitek.com:8080/favicon.ico", null,
                        null, true, "GB18030", "GB18030");
         }

  • Playback is not working!

    One of my movies (28 mins) suddenly stopped working properly. It was working fine before, but now I can't playback at all. When I press the > button, I get a couple of frames of playback and then the whole computer 'hangs' with the little coloured ball (what IS that thing called?!) rotating away in front of me for ages. Can't operate the computer at all and have to turn it off using the off button.
    Any hints?
    Mark Dalton

    I ve got kind of the same problem - my movie (about 50 minutes) doesnt playback anymore proberly.... when I hit the play button u hear some sound than its gone... pics come sometimes frame by frame but mostly the color ball hits my face right away... even "applealtesc" doesnt work I have to turn off my laptop...
    I use a new PB G4 1,67 with 1,5 GB ram and a external hd 200 GB over FireWire 400 or USB 2.0... doesnt make any difference... I cleared everything I found on this website to do... cache (over Onyx) - trash - I ran the disc programm, repaired it as suggested - I ran hardwaretest - no problems with my hardware were found.... so ...
    any more suggestions?
    Its really a pity that I bought this PB just for working and now are not able to do so due to a problem... many seems to have...
    regards
    silver

  • Mercury Playback Engine not working on PrPro CC 2014

    Hello everyone. My Asus J750JS (NVIDIA 870M) modified with a Samsung 1T SSD for Footage and a original 240GB SSD for C: and F: (chache) my Adobe CC remove all the .TXT with CUDA CARDS SUPPORTED file!!!! and i am using CPU only!! even when the Mercury Playback Engine its on!!! please help!!!
    You can see that the Warp Stabilizer (CUDA effect) with the Mercury Playback Engine activated give me red line!! i am working on a important project and i need a fast solution PLEASE!!

    ....in addition to the advice I gave on your other post....as great as our Asus gaming laptops are...they are STILL TWICE AS SLOW AS A POWERFUL DESKTOP SYSTEM running PPro !!!   My new G750JW compares in performance with some of the BEST DESKTOPS.....but, from THREE YEARS AGO !!!!!
    There is only SO MUCH you can do with a laptop.....much of the professional software today takes advantage of the greater power of current desktop systems and will not run at its best on a less powerful laptop. Now that you have dramatically improved your drive system by getting rid of the 5400rpm HDD and installing the Samsung SSD , ( hopefully,the 850 pro model and NOT the EVO), you STILL need to max out your system memory to 32GB from 16., With warp stabilizer, a desktop system with a 6 or 8 core CPU running at over 4Ghz would behave MUCH differently !!! I do NOT know if more memory would help with warp stabilizer.....I know it DOES help with other operations I have used on PPro !! Take the test at the  PPBM7 website to see the performance of your machine and identify any potential problem.

  • Crossfeed playback will not work (iMac 10.5.8 iTunes 10.6.3)

    I have the crossfade in my iTunes options and have used various settings to see if they would work, restarting iTunes to see if that would help update the settings. The crossfade option was still checked although not functional.  I have also made an album a "gapless" album to see if that would help matters to no avail.  I have tried it on sequential songs, random songs, etc.   Nothing worked-I don't have iCloud

    Yep
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    1: Backup your files to a external drive also Carbon Copy Cloner it to another blank external powered drive
    http://www.bombich.com/download.html
    The clone is so you have a copy of EVERYTHING and can even hold the option/alt key down (wired keyboard) to boot from in case of trouble or if you forget something or a problem occurs with the 10.6 upgrade.
    2: I reccommend (after you have a copy of your users personal files (only) on a external drive and all disconnected, is to delete those files from your internal drive, this way when you upgrade to 10.6 from the disk you get from Apple, it's faster on the hard drive. Then Software update fully, then return the users files last.
    3: If you have problems and need to wipe and install 10.6 (or for the best performance)
    How to erase and install Snow Leopard 10.6
    Even extra performance
    For Snow Leopard Speed Freaks
    4: Upgrade Carbon Copy Cloner to the 10.6 version and use that to create a new clone drive. This way you can restore your system easily or boot from it in case of a hard drive problem.
    I don't receommned you go to 10.7 or 10.8 on that machine, it's too dated and will cost you in all new apps, RAM and slowdowns etc.,
    Save your money for a new machine on 10.8 or whatever is coming up next.

  • Swf playback controls not working correctly

    Hello all -
    When I publish the Captivate project that contains a swf file
    and an audio file everything plays well until I use the controls.
    Stop/pause works fine,but when I use rewind or ff etc the swf file
    will not rewind nor start over.
    Any help would be appreciated
    Thanks
    Rick

    Uninstalling Glimmerblocker fixed the problem of Safari being able to access all web sites.  One of the other many procedures I did must have solved the issue of the apps not launching.

  • Video playback controls not working properly

    video
    I put a video into edge and it works but the player controls don't show up when you roll over any part of the movie they only show up if you roll over a specific area at the bottom of the video, A very small area. I want them to be there either always or when the user rolls over any part of the video. I attached a link of the video.

    I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
    Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
    Here is the skin I have used for that in the Captivate editor.
    The best way to test these outputs is from a webserver or SCORM Cloud.
    Sreekanth

  • IMovie video freezes during playback; transitions not working

    I'm nearing the end of making a video in iMovie. I have several clips, transitions, and music added. On some spots, the video playback stops, while the music continues; one or two clips later the video picks up again. I've deleted that section of video and re-inserted a similar clip only to have the same problem. Additionally, the transition into that particular clip doesn't work. When i play the raw video clip, it works just fine. I don't understand. Someone have a clue what's going on?

    You might be able to narrow down which item is causing the problem and deleting it. First create a duplicate project:
    Click the Project Library button and highlight the name of your project by click on it just once so that it will be colored in blue.
    Go to File Menu > Duplicate Project, iMovie will create a duplicate with a number added to the end of the name
    Open the Duplicate project and try deleting a picture, or transition or video clip where the video freezes or even just before the point where it freezes.
    Playback the movie and see if it reacts differently.
    Just try one thing at time and you might discover it's one item in the Project timeline that's causing the problem. Once you find the source of the problem, you can try replacing it or just leave it out until you finish the project and export it. Sometimes it's difficult to figure out how something got corrupted and subsequently how to ressurect it.

  • Simultaneous audio playback does not work

    I have tried everything from wiki:
    https://wiki.archlinux.org/index.php/Ad … ack_Issues
    I have even uninstalled PulseAudio. Still i cannot play two sounds from diffrent apps in same time
    Any ideas?
    Thanks.

    Max-P wrote:By default, ALSA only supports a single stream at a time.
    I did not know that. Thank you.
    Max-P wrote:Solution 1: Using PulseAudio
    - First make sure the pulseaudio daemon is running using any task manager.
    - Then, make sure your app is outputting to PulseAudio: run pavucontrol, and check the playback tab. Your apps should list there. If they don't but still produce sound, your app one or both of your apps are not using PulseAudio and you need to fix that.
    /etc/asoundrc.conf  is empty, this is my ~/.asoundrc
    pcm.!default CA0106:front
    Situation is better. Mpd, and chrome(youtube/flash) have problem with pulseaudio. I will try to fix them. Thank you.
    Until I fix problems with mpd and chrome, this issue will be opened.
    mpd has known issue "[pulse]: pa_context_connect() has failed: Connection refused", but i cannot figure it out yet.
    brebs wrote:
    The default ALSA PCM for output is named "default" - a good name, and it's what the vast majority of apps use as their, er, default. For example, Adobe Flash uses it.
    This "default" PCM gets set up as stereo speakers, outputting via dmix. Usually. The configuration is in /usr/share/alsa/, and it's been abstracted WAAAY too much.
    I think this is my problem with chrome.
    Thank you brebs and max-p.

Maybe you are looking for