3D plot not correctly display

I opened the example VI, "3D Surface Plot.VI", but the 3D plot indicator on the front panel did not display correctly. What's wrong with this? Is this a bug of Labview, or related to my computer hardware? And how could I fix this problem?
Solved!
Go to Solution.

Hello Pound,
It would be extremely helpful if you could provide additional information on the version of LabVIEW and what OS you are using as well as what the computer hardware you noted might be an issue actually is. Have you tested this on other computers that don't show the problem?
Right now all we have to go on is that you're using a version of LabVIEW that includes the 3D surface plot.
That being said, this looks similar to the issue noted here:
Labview 2011 and 2011 SP1 known issues: 3D Picture Controls can display transparently
http://www.ni.com/white-paper/13164/en/#238713_by_Category
It appears that this is an issue with certain integrated graphics cards and one known solution is to update the drivers for said card. Additional information is provided in the link above.
Best Regards,
Tom L.

Similar Messages

Accounts Setting page at Facebook is not correctly displayed

Facebook accounts settings not correctly displayed. My OS is Windows XP & Internet security is Kaspersky

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Firefox 3.6.8 does not correctly display inuktitut text in an input field. Any solution?

Firefox 3.6.8 seems to have an issue with Unicode in input fields, e.g.
The following code
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
should look more or less the same as
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
The first one uses a Unicode font (available at http://www.gov.nu.ca/english/font/) the second one one of the traditional non-unicode fonts.
The two squares in the first string are not really squares. When you copy and paste the string onto a system with a unicode font containing canadian syllabic characters, then the squares are displayed correctly.
Additional information: I just found that this is not related to input fields, as I thought in the beginning, but also happens within normal Ps or DIVs.
Strangely enough, the following complete HTML seems to work when saving as a local file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="iu-ca" lang="iu-ca">
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<style>body{font-family:Arial,Pigiarniq;}</style>
</head>
<body>
<p>ᕿᓂᕐᓂᖅ</p>
<div>ᕿᓂᕐᓂᖅ</div>
<p>a real unicode font:</p>
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
<p>a non-unicode font:</p>
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
</body>
</html>
and opend within this same browser session in another tab.
In my current browser session, I see two different renditions of the string:
- on this support form submission page, the string is incorrectly displayed (with two squares) as on the webpage which is currently under development
- in another tab, the above mentioned HTML file displays all instances of the string correctly.

(A) is what I see on this webpage (Firefox support form submission page)
(B) is what I see within the same browser instance in another tab, viewing the above HMTL code
(C) is what happens on the webpage under development.
A and C show the same strange behaviour.
Opera, Safari on Windows and IE display it correctly.
Thanks for any hints,

Data Integrator: Arabic characters are not correctly displayed

Hi,
I'm trying to load Arabic text via an UTF8 flat file into an Oracle database.
I've read several topics and set the correct code page settings (also during install) for the datastore and flat file.
Already in flat file preview (see attached screenshot), the wrong characters are displayed. The characters as they are displayed, are inserted in the database. So I think that if I get the flat file preview correctly, the text is inserted correctly into the database.
On the other hand: When i copy the contents of the flat file, via a bodi job, to another flat file, the target flat file does contain the correct characters (when opened in a utf8 file reader).
I tried several solutions and also went through the Code Page help topic on the BODI site.
Does anyone know a solution to my problem or know this is a BODI bug or something?
I'm using Designer version 11.5.3.9 (I went through fix notes of versions after 11.5.3.9, but saw nothing mentioned about my problem). The Oracle database does support arabic characters as I can insert them via e.g. SQL Developer.
Thanks a lot in advance!
Picture of the flat file settings and data preview:
[flat file settings and data preview|http://img169.imageshack.us/my.php?image=arabcharyx3.jpg]
Edited by: Willem van Opzeeland on Jul 23, 2008 2:13 PM: added info

Hé Amr, thanks a lot! This sounds good.
I indeed saw a kind of this solution somewhere else. What I did not is restarting the computer, since it is a shared server. Maybe that was why it didn't solve my problem.
Before I restart an additional question: I need to convert some files with Turkish characters as well.
Have you got a value which I can put in NLS_LANG, which supports these characters and Arabic characters both at the same time?

Please help - french accents not correctly displaying/storing in database

Hello -
I have 2 databases running in 2 different character sets.
I am able to insert the following french accents in both databases and stored correctly also in db and displayed correctly in sql plus -
à À Ä ä Â â é É È è Ë ë Ê ê î Î ï Ï ç Ç Û û ô æ ö « »
But the following 2 charactes donot get displayed/stored correctly in any of the databases -
1. For db running in UTF8 character set it stores/displays as follows -
2. For db running in WE8ISO8859P1 character set it displays as 2 filled black squares. But when I do 'copy and paste'. It is pasteing correctly in the editor as follows -
I have another one database running in same WE8ISO8859P1 character set , DBA out there sent me the results from sql plus for the above 2 characters and they are getting displayed as well as stored fine.
I have the following questions -
1. Besides database characterset what else parameters or environment variables I need to check the for these characters to be displayed/stored correctly ?
2. Why would Databases with same characterset gives different results for the same characters ?
3. UTF8 is superset of WE8ISO8859P1 characterset, then why in that UTF8 db is unable to store that characters
which were able to be stored in WE8ISO8859P1 db.
By these various results, I am very confused and not able to troubleshoot further.
Any help would be very much appreciated...
Thanks
Rama

Ah... an interesting NLS problem ;)
Main problem or misunderstanding could be that the characters small and capital ligature OE ( ) is not part of the ISO 8859-1 repertoaire. That is, you need another characterset to store and use those characters properly.
However, and sometimes unfortunate, if both db and session is using the same characterset setting, the binary value is "passed through" without conversion and stored - even if actual char is not valid!
1. DB charset should be able to store all possible chars your apps/users need. That's a first. Is that the case?
For sessions, the OS/app charset used should be indicated to Oracle with NLS_LANG parameter (registry or env var).
2. Are you sure that (valid) character codes are stored correctly. Note that storing values directly could work technically but be wrong semantically. Values > 127 are not valid in UTF-8 (needing further explanation)!
3. How are "characters" stored? What does this tell you?
SQL> select dump(column,1016) from dual;
Regards,
Fredrik

IWeb pages Do Not Correctly Display In W3C's Browser/Editor - Amaya 9.54

Earlier I posted that lastest version of Firefox would not display iWeb pages correctly. However, iWeb pages have never displayed correctly in the W3C's browser/editor Amaya. I just tried the Amaya upgrade (9.54) and the iWeb pages still don't display correctly NOR do any of my links work!? Everything displays correctly in Safari (and now Firefox?!)
Here's my iWeb page:
http://usablemakeover.com/publicopenspacedesign101/Blog/Blog.html
To download and check with Amaya:
http://www.w3.org/Amaya/

The issue isn't whether or not users use Amaya for web browsing - the issue is: does iWeb produce valid HTML and CSS!
Since Amaya is produced by the W3C - who establishes the standards for valid HTML and CSS (yes/no?) - anyone using iWeb to produce content - expects iWeb to produce valid pages. Or is there a problem with Amaya?
Here's how to check for valid HTML and CSS. Just paste my URL (or your own iWeb page URLs):
http://usablemakeover.com/publicopenspacedesign101/Blog/Blog.html
into: http://validator.w3.org/
and http://jigsaw.w3.org/css-validator/
You will likely be surprised with the results.
G4/500 Mac OS X (10.4.9)

UTF8 characters not correctly displayed whilst having encoding set to UTF8

Although the Encoding in Tools > Preferences > Environment is set to UTF8, SQL Developer is not able to display the UTF characters correctly.
I know for sure that I have tested this before using an older version of SQL Developer and then then this worked OK.
Can somebody tell me if I need to change anything else within SQL Developer to make sure the UTF8 characters like (Ὦ φῶς τελευταν σε προσλέψαιμ) are displayed correctly?
Our database (both SQL Server and Oracle) are both completely Unicode aware.
I'm using version 1.1.2.25 build MAIN-25.79.

Hello Barry,
'Where are you seeing this'
Well we are seeing this in the most used tab display on a table. So for instance our database is called PV50. Then from the connections window I double click on PV50 > Tables > <table_name> (in my example QUEUE_MESSAGE).
Then the table is opened. Then I goto the 'DATA' tab of this table and look at the column in which the UTF8 characters are stored. In there I see the wrong display at the moment. I hope this helps to sort out the problem.
If not please let me know.

Verison 7 not correctly displaying some columns/windows

NING is one of the larger providers of social networking sites around...since upgrading to version 7 some columns and windows do not display correctly (some text is not shown). I have a photo of the behavior but cannot find a way to post to help to demonstrate the issue. As an administrator for a site on NING, I cannot give you a URL as it is a password protected are of the site. However attached is a link to a discussion about the behavior from NING's Creator site

The correct source of assistance with this situation is directly from
http://www.samsontech.com/samson/products/microphones/usb-microphones/gtrack/ as they are the manufacturer of the hardware and have sole responsibility for support of their product. This is not a Microsoft product and Microsoft does not provide support
for third party hardware.
I especially recommend you download and read
Samson G Track FAQ's V2.0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Actual cost not correctly displayed for material consumed in an order

Hi All,
I have an issue which is as follows:
In a service order, I have consumed 13 materials for which I am able to view the list of goods movement with its amount and plant and storage location.
For each goods movement system has generated material document, accounting document, controlling document, etc.
However system is not displaying the actual costs of all the 13 materials consumed within the order. Only one material cost is dispalyed in actual cost of overview tab of COSTS tab.
Incidentally, when I clicked the "Rep. Plan/Act." button, system is displaying the actual costs of line item wise material consumption.
Kindly let me know what could be the reason for this error.
Many thanks in advance............ JK.

Kannan,
If the "Rep. Plan/Act." costs are correct, then you have problems with your value categories
Have a look at the following correction programs:
Run TCode OLI5 to correct value category errors (program RIPMCO00)
Run TCode OLPM to re-build structures (program RIPMS001)
PeteA

[SOLVED] vim color highlighting not correctly displayed in vc/tty

For instance visual selection is set up to change fg/bg to black/green but changes fg to green. Under x using urxvt it displays correctly.
Last edited by Noble (2010-07-26 21:22:19)

I have written my own syntax highlight theme, post below. If you think your script could do anything about it after looking at the file please post But as I said, vim works fine in urxvt, but not when I switch out of X and run it in the vc/tty.
:set statusline=#%n\ %y\ %F\ %r\ %=%c\ %l/%L
:set hlsearch
:set nocompatible
:set noexrc
:set number
:syntax enable
:set autochdir
:set backup
:set backupdir=~/.vim/backup
:set directory=~/.vim/tmp
:set autoindent
:set ruler
:set nowrap
:set nocp
:set scrolloff=5
:set sidescrolloff=5
:set fileformats=unix,dos,mac
:set title
:set laststatus=2
:set tabstop=4
:set autoread
:set showcmd
:set showmatch
:set shiftwidth=4
:set smarttab
:set backspace=indent,eol,start
filetype on
filetype plugin on
filetype indent on
hi clear
set background=dark
if exists("syntax_on")
syntax reset
endif
highlight ErrorMsg ctermfg=red ctermbg=none cterm=bold
highlight WarningMsg ctermfg=red ctermbg=none cterm=bold
highlight VertSplit ctermfg=green ctermbg=black
highlight Folded ctermfg=magenta ctermbg=none
highlight FoldColumn ctermfg=magenta ctermbg=none
highlight FoldColumn ctermfg=magenta
highlight LineNr ctermfg=green cterm=bold
highlight ModeMsg ctermfg=lightgreen cterm=bold
highlight MatchParen ctermfg=black ctermbg=green
highlight Normal ctermfg=white ctermbg=none
highlight SignColumn ctermfg=magenta
highlight NonText ctermfg=blue
highlight Question ctermfg=red cterm=bold
highlight Comment ctermfg=8
highlight Constant ctermfg=green cterm=none
highlight Identifier ctermfg=white cterm=bold
highlight Statement ctermfg=lightgreen cterm=bold
highlight PreProc ctermfg=10
highlight Type ctermfg=2
highlight Special ctermfg=cyan
highlight Error ctermfg=red ctermbg=none
highlight Todo ctermfg=yellow ctermbg=none cterm=bold
highlight StatusLine ctermfg=black ctermbg=green cterm=none
highlight StatusLineNc ctermfg=black ctermbg=lightgreen cterm=none
highlight Directory ctermfg=white
highlight Search ctermfg=black ctermbg=green cterm=none
highlight Visual ctermfg=black ctermbg=lightgreen
highlight WildMenu ctermfg=black ctermbg=cyan cterm=none
highlight Pmenu ctermfg=black ctermbg=green
highlight PmenuSel ctermfg=black ctermbg=lightgreen cterm=none

Outlook E-mail address format on IPhone not correctly displayed

I have MS Outlook 2007 and am synching my Outlook contact groups to my IPhone.
Any of the contacts e-mail's in the groups that I created look normal on the IPhone, but I copied a bunch of contacts from our Public folder contacts group into my personal Contacts group, and when I look at the contacts through Outlook the e-mail address appear fine, but when I view the contacts e-mail address from the IPhone, It shows all of the e-mail address in the full exchange mailbox directory name, not the regular e-mail address.
Below is an example of the format they are appearing in.
/O=PMA CONSULTANTS LLC/OU=PMA_DOMAIN/CN=RECIPIENTS/CN=<username>
Any Help would be appreciated. I have not tried this from any version of Outlook other than 2007 yet.
Rob

Right. Its an issue with how Outlook on an Exchange account handles email. It doesn't send the email out through the SMTP and then back in to the account. It just routes it to the address internally.
You'll need to modify the entires with the correct email in Outlook.

In the English environment does not correctly display the Chinese

I design query in the English environment to input Chinese characters. It can be run correct in the excel, but in the web page or portal display incorrect.
My environment of language is English, but I want to display Chinese in the portal.
How can I do ?
Any suggestion!
Thanks.

Hi ,
I am facing one issue in WAD ,Could please help me out
I am developing my reports in language English
In WAD 3.x when we execute the report in the URL we can see language =EN, (https://inls51556188a:6001/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=ZLUMM_Q100_TPL01)so even when the user browser settings are in German still the report gets displayed in English where as when the user login in German and execute the report in WAD 7.0 it displaying the techical names for text data and infoobjects names as there is no text data maintained in German.
Is there a way to fix the language in the iView of the WebTemplates directly in the Portal.If so how can this be done?
Thanks,
Sany

Uploaded page does not correctly display hidden layers

Hi,
I am a bit baffled by this as I haven't seen this in all my
years using Dreamweaver.
I have created a few links, that when rolled over they
display a hidden layer that contains a styled table of contents (No
links in the tables).
This works perfectly as expected on my testing server, but
when it is uploaded to the client webserver, the hidden layers
display below each link, throwing the page out completely, and also
the CSS style does not apply.
Is there something on the clients webserver that needs to be
changed or tweeked to recognise hidden layers, CSS etc?
Cheers

Are the layers actually hidden in the code? I mean when you
look at the
code view of the page (either in the CSS or the inline styles
for the
layers, depending on what DW version you are using), do you
see -
visibility:hidden
or -
visibility:visible
Which?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Macnimation" <[email protected]> wrote in
message
news:e3q43i$1hg$[email protected]..
> Hi,
>
> I am a bit baffled by this as I haven't seen this in all
my years using
> Dreamweaver.
>
> I have created a few links, that when rolled over they
display a hidden
> layer
> that contains a styled table of contents (No links in
the tables).
>
> This works perfectly as expected on my testing server,
but when it is
> uploaded
> to the client webserver, the hidden layers display below
each link,
> throwing
> the page out completely, and also the CSS style does not
apply.
>
> Is there something on the clients webserver that needs
to be changed or
> tweeked to recognise hidden layers, CSS etc?
>
> Cheers
>

Monitor does not correctly display after waking up from suspend

Hello,
Awesome WM. I use systemctl suspend to put my computer to sleep. It works fine, however, when I press the power button on my system unit, the computer wakes up but the image is distorted completely so I cannot see what is where... Quiting Awesome WM (win + shift + q, if I remember correctly) and logging back helps, but is not really convenient. I have tried to find a solution for the problem and, as you most likely surmised, with no success.

http://en.wikipedia.org/wiki/Compositin … w_managers
https://wiki.archlinux.org/index.php/Co … #Composite
Have you checked your logs for what is happening after waking up?
Last edited by emeres (2013-10-13 19:35:50)

Pictures not correctly displayed - landscape - portrait

I use picasa on my pc and orient the pictures with it ( landscape or portrait) but when I view them on apple tv the pictures are not oriented as I have them in picasa. Any help with this is much appreciated.

Use another photo editing application to rotate your photos.

3D plot not correctly display

Similar Messages

Maybe you are looking for