3D Render Destination "Scene Window" Behavior

Hello,
I've been making good use of the 3D picture controls recently. Infact, I've gotten to the point where the rendering is painfully slow unless I use the scene window as the render destination, allowing for hardware acceleration. The problem is, a pop-up window is very inconvenient for the UI I'm designing. Does anybody know any tricks what might allow me to embed the window in the VI? I need the hardware acceleration but want to suppress that popup window behavior, essentially.
Thanks

If you have multiple VIs and you just want them all to show in the same window, it is possible to have the front panel of one VI load into a subpanel of another, thus one VI could have multiple VIs displaying different parts and manage how they fit together. See this example to find out how to do this. I'm not sure what this would do to the efficiency or hardware acceleration, but it would allow you to have seperate VIs run with different properties and have them all display to the same front panel without managing passing the data back and forth.
- Regards,
Beutlich

Similar Messages

Strange window behavior with CS5

I have begun experiencing strange behavior with PS CS5. I should begun with the machine configuration: 2.66GHz iMac (8,1) Intel Core Duo with 4GB RAM and OSX 10.6.6, Radeon HD 2600 Pro graphics card. The initial symptom showed up suddenly as an inability to display an image window; that is, I could open PS normally, everything would show up properly, but when I opened an image file of any sort, there would be no image window. Other cues indicated that the file was open; for example, the window menu would show it selected, and the layers palette would show the file's layers.
It did not seem to matter what type of file was involved: PSD, JPG, TIF, whatever. Occasionally, this behavior would begin during a session. Sometimes it would happen right off the bat. Sometimes, stopping and restarting PS seemed to clean things up; other times, this had no effect. After messing around quite a bit with different permutations and combinations, all I could say was that the problem was random.
I might add that I've had PS CS5 on this machine pretty much since it was announced, and had not had problems with it before. So this issue came along quite suddenly a couple of weeks ago. This was a little after I'd installed an update for Nik's Viveza 2; and I began to suspect that. Although why Viveza should do such a strange thing was odd, and Viveza was never part of the files I was experiencing issues with. Anyway, I went back to an earlier version of Viveza and the problem persisted.
Since I run Time Machine, I also went back to versions of the entire PS folder from a month back, and found the same problem. Along the way, I experimented with the files I was using with PS CS4 & CS3, which I also have installed on this machine. These two versions of PS run perfectly well. At least the CS4 version has precisely the same plugins as the CS5 folder, and this seems to discount the potential problem with plugins.
To be sure about CS5, I completely deactivated, deinstalled, and reinstalled it. The same issues occurred. Now, I have to admit that I let PS run its update process so that I brought it back to the most recent version in this step of my troubleshooting. So, I can't be certain that the issue isn't with some update of CS5.
I might add that I have been running CS5 in 32-bit mode, for compatibility with certain plugins. This may or may not be an issue, since I have limited experience with running in 64-bit mode. At this point, I should add a bit more about the confusing behavior.
While messing around with CS5, I also suspected the GPU support, since my problem had to do with windows. When the problem presents itself, the usual cycle through window views that you get by pressing the "F" key seems to get messed up. In particular, the "F" key doesn't work at all. Next, if you use the View menu to select different views, the full screen with menu bar view will often have garbled pixels, while the full screen view will show a blank grey screen. Then, cycling back to a window view will show a window with blank grey contents. This is interesting since the starting point was no window at all; but going into full screen and then back will produce a window with bogus contents.
Now, the next strange thing, having to do with the GPU, is that CS5 often fails to recognize the Radeon HD 2600 card. Oddly enough, it did originally. And I had it running in Basic mode. However, CS4 does recognize the GPU; and I can set it in any variety of modes: Basic, Normal, and Advanced. This behavior is not consistent at all either; that is, while CS5 almost always now fails to detect the GPU, sometimes it does. As near as I can tell, this failure to detect the card does not depend upon whether I start CS5 in 32-bit or 64-bit mode. OTOH, CS4 always recognizes the GPU.
Another form of this odd behavior arises if I start CS5 cold, and then just open a new blank window. This almost always works. I get a blank white window, and I can paint on it with a brush, etc. However, if I go ahead at this point and open a file, then the new file takes over the window; and there are no tabs. If I select the original new file, usually labelled "Untitled", the window bar will show the change of filename but the window's contents and the layers palette will continue to show the old file that I had opened. Cycling through views can sometimes get back to the new Untitled file, but just selecting file windows never works.
Yet another aspect of this messed up window behavior is that the workspace bar, which shows the Bridge, MiniBridge and view icons on the upper left and the various workspace options and CS Live on the upper right, is present but blank. OTOH, the tool bar is always displayed correctly, as is the horizontal bar that shows the various tool options. Likewise, the palettes for the workspace such as layers, swatches, adjustments, and so on, are always correctly displayed on the left.
My next steps in trying to figure this out will be to ensure that I am running the latest of all plugins so that I can get everything running in 64-bit mode and try this again. However, the single factor that seems consistent in this whole mess is that whenever I do find this odd behavior, the performance preferences window will indicate that CS5 is not detecting the GPU. Whenever this happens, if I open up CS4 and check the same performance preference in it, the GPU is detected. I can have the two preference windows side by side on the screen in fact, CS4 sees the GPU and CS5 does not. The counter-indication is that sometimes CS5 will work properly and the preferences window still shows that the GPU has not been detected. Having said that, I can add that if I have opened up CS5, and it has found the GPU, and I have set it into, say, Basic mode, and then later found CS5 messing up, and I go back and check the performance preferences again, the GPU has always been lost. So, CS5 can mess up windows with or without the GPU detected and active; but when if it started with the GPU present, it will show up as lost after the weird behavior starts.
To add one more observation, I have had Macs and other computers with failing GPUs. This computer is showing none of the typical signs of that. Every other program seems to be working just fine, and I have a lot of these, many graphics intensive; e.g., Corel Painter 11, Parallels v6 running Windows 7, PS CS4, Lightroom v3, Aperture v3, and so on. It is just CS5 that is messing up.
I could load up this message with screen shots of all this nonsense, but I'm not sure what that would add to the strange tale, other than I'm not pulling your legs. I am, however, pulling out my own hair.
As I stated before, this began quite suddenly a couple of weeks ago, early Feb 2011. My best guess as to cause is some combination of incompatible updates between CS5, OSX, and maybe some plugin or other. I found unusual behavior with onOne's FocalPoint v2 last year after Apple updated GPU drivers in some OSX update, and cratered that program. It took onOne a month or two to fix that. I have CS5 on a laptop with the same OSX version, and on that I haven't seen these issues; but then, I haven't been using it as intensely over there. Also, that machine has different CPU and GPU models than this iMac.
So, to the community: is anybody else starting to see this odd stuff? Am I alone?

Here's the reason I say that the same plugins exist for both CS4 & CS5. Sometime last year, the internal hard drive on this computer died (as they so often do), and it was replaced under the Apple care warranty. As a consequence, I decided to rebuild the OS and applications from scratch and bring back my user files from backup. I among other things, I reinstalled all of CS4 as well as CS5 (and I had to put CS3 back too for reasons having to do with printing calibration images for Quad Tone RIP). Then, I went to reinstall the plugins that I needed. I use Nik Software, onOne, Portrait Professional and various Topaz plugins. To my recollection, most of these install in PS CS3, CS4, CS5, Aperture, and Lightroom. In short, it is not that I've copied or moved plugin folders from one application folder to another, just that the installers automatically detect the presence of the various applications and put the various plugins into each, as appropriate.
The only 32-bit plugins that I have that don't fit into this category are from Vincent Versace. He provides special versions of certain Nik plugins (Tonal Contrast, Contrast Only, etc) that function with some Acme Educational extensions for performing B&W conversion, sharpening, blah blah blah. These plugins are only 32-bit and the extensions are only CS5 compatible. I've installed these ones only into CS5; so, you've got me. OTOH, I've had these from Vincent as soon as CS5 was available; and they've worked so far without problems. Perhaps I should just edit the extensions so I could use the latest plugins direct from Nik instead of the Versace special editions...
I've checked fonts and repaired permissions. I am presently going through the rather tedious process of disabling plugins and extensions to see if anything yields consistent results. The rather random arrival of the strangeness makes ensuring that a change is really having an effect more difficult to validate, as you will appreciate.
I apologize for my long-winded original post. I add all of the detail so that anyone who'd experienced similar strange behaviors might properly pattern-match what they were seeing. On the one hand, in finding the cause of a problem, you look for what's changed; and theoretically nothing is new. On the other hand, there's always so much changing behind the scenes with automatic updates of this, that, and the other thing that it's impossible to make the claim that nothing's new.

Named Destinations with window.open

I have a ColdFusion application that opens a reference document to a specific point of reference. I had been using an html page with anchors for the reference document but would like to use PDF with named destinations.
The code I am using is from a button click event:
<input type="button" value="Reference"
onClick="var ptr = window.open('../reference/<cfoutput>#reflink# </cfoutput>','popup','width=600,height=600,scrollbars=yes,resizable=yes,toolbar=no,direct ories=no,location=no,menubar=yes,status=no,left=500,top=0'); if(ptr) ptr.focus(); return false">
The reflink variable would be something like "myreference.html#myanchor for html and "myreference.pdf#mydestination" for pdf.
The code works fine for html. The click event pops the window and displays the anchor location. Another event will refresh the existing open window with the new location.
With the pdf, the first click works correctly. The second click clears the document view to blank and the first window is effectively hung. If I click again, a new window is opened and the first window remains blank.
If I don't use named destinations, the window is refreshed each time with the pdf file and the not hung. So the problem only occurs when there is a named destination in the URL. But I need named destinations to zoom to the reference location.
This occurs with IE 8.
When I use Firefox, the behavior is different. The window pops correctly, but after the first attempt, it does not navigate to the correct named destination. Any subsequent click event results in the pdf file staying at the existing location.

Yes, I think you're right. I tryed the same in the HTML-protocol and it works: example:
http://profiroll.fidom.de/pdf/01_Lastenheft_PPA_LH3_8.1_Elektrik.pdf#page=42
It would be nice to find a workaround to use this "addressing" in MS-Office!

Scene Window with Multiple Video Cards?

Hi,
I'm using the 3d Picture Control and displaying images using the scene window (the video hardware-accelerated window). The original video card was a Nvidia Quadro FX370 (PCI-express slot). I added a second video card, a Nvidia GeForce 6200 (PCI slot). Now the scene window will only render on displays connected to the second video card. When moved to a display on the original card, no scene is displayed and the window latches on to the background. Does anyone have any experience with this or have any suggestions?
TIA,
Joe

Hi Joe,
It seems as though there may be a conflict between the drivers for the two video cards. Since the video cards are made by the same company there may be some shared files between the driver and when they both try accessing the file it could be creating an errorous situation. The first step I would take is to ensure that you have the most up to date drivers for both video cards to verify that this situation has not already been fixed. Next to identify if your video cards are in fact sharing files:
Right click on My Computer and select properties to bring up the System Properties
Click on the Device Manager under the Hardware tab
Once the device manager is populated expand the display adapters and select one of your video card drivers
Right click and bring up its property window
Go to the Driver tab and click on the Driver Details to bring up all of the files the driver uses
Repeat steps 3-5 for the other video card driver and compare to see if it shares any files
Please reply and let me know the results of this process. This will help us to more specifically identify our issue.
Thanks and have a great night!
Cheers,
Jonah
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval

Preloader Image Script and Pop-Up Window Behavior

Hello --
My client's referring site --
www.moscaritolo.com/originals.htm. Please note: I am not a
programmer, but more of a designer and don't possess the skills of
writing code so in the development of this site for my client, I
decided to use this preloadslider -
http://www.dynamicdrive.com/dynamicindex14/preloadslide.htm
- by Jason Moon to display the images. So far, I really like it and
so does my client.
However, I now have a problem with the pop-up window behavior
for the triptych image on the originals.htm page. When you hit the
triptych pop-up behavior, the preloader stops working on the main
page and (#) stays in the address bar even when you've closed the
pop-up window for the triptypch image. Next, I tried just making
the word triptych a standard link to a new htm page and using the
back button on the browser and STILL, the preloader will not work
properly..? Any ideas..?
Text

please code sample ? demo code is enough to try
with.This has nothing to do with samples. You should know
which encodings you use. You decalre it in the HTML
i have not mentioned encoding in the HTML.
by html encoding , i think you mean this (bold letter)
// created by dreamweaver 2004
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>if you mean that...NO, I DID NOT USE that thing in my JSP. i deleted that.
and XML headers. XML encoding, i have this at the start of XML....
<?xml version="1.0" encoding="ISO-8859-1" ?>
// XML data
Java, if nothing else is said, uses
UTF16.
in my form i have method="post".And what do you receive? What does "corrupted" mean?
Not well-formed? Garbage characters? Truncated?error message: [STDOUT] xmlStringelectric.xml.ParseException: java.io.IOException: could not find 59 line 1, char 46682:
NO, i dont blame my parser. if i provide the XML seperately, then my parser works fine.
but when i send the XML via JSP to the parser it does not work.
that means sending of XML is making some trouble.

Strange 'Top Window' behavior in L8

I've noticed this one for a while - curious if it's a common 'bug'.
When L8 is open and I switch to another app, like Safari for example, sometimes one or two of Logic's plugin windows will remain 'on top' of my display. I have to go back and switch screen sets to clear it.
Also, if I'm in another app and I click on one of Logic's windows (plugin window, or environment mixer for example), it does NOT activate Logic as the 'active' application. Even though I can move faders in the mixer, for example, my top screen menu still shows Safari as the 'active' application. Again, I have to use the command-tab App Switcher to get Logic Pro as the active app.
Anyone else experience this? It's pretty much a 'full time' behavior on my system.

Yup - same here. Switching applications seems to confuse Logic which I don't recall in LP7. I switch often to Audacity, Amadeus or stand-alone Melodyne, and I also see the "Logic not active' behavior with the mixer being active.
The windows behavior in general seems strange .v. LP7 generally, and the entire window handling, and focus not shifting when windows are changed within 8 is different; probably related. I seem to be clicking around more to get to where I need to be. I use dual monitors and separated windows and screen sets.

Trouble with the Open Browser Window behavior

I have a page with thumbnail images. I want to be able to
click the thumbnail and have a new window open with just that image
in the window. If I don't assign a link to the thumbnail, and
select the Open Browser Window behavior, the only 3 options for
when to open the window are onLoad, onError, or onAbort. I want it
to be opened onClick. If I do assign a link to the image, and then
select the Open Browser Window behavior, it gives me the option to
open the window onClick. However, when I test it, it opens 2 new
windows - the one I want, and the one that is the link that I
assigned to the image.
I can't figure this out! Any help would be greatly
appreciated.
Sam

You must always do the following when applying behaviors to
images:
1. Assign a link to the image first, even if it is a null
link. Use the
Property inspector to do this.
2. Click on the image in Design view, then click on the
<a> tag that you
see on the Tag inspector bar at the bottom of the document
pane so that the
anchor tag is selected.
3. Now apply your behavior.
You *can* usually truncate this process as follows -
1. Select the image in Design view and make sure that
<img> is selected on
the Tag selector bar.
2. Apply the behavior.
3. Use the behavior panel to set the event desired to
<A> onClick, or <A>
onMouseOver, or any of the appropriate "<A>" containing
items in the list.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"sammas" <[email protected]> wrote in
message
news:f8t28c$b6j$[email protected]..
>I have a page with thumbnail images. I want to be able to
click the
>thumbnail
> and have a new window open with just that image in the
window. If I don't
> assign a link to the thumbnail, and select the Open
Browser Window
> behavior,
> the only 3 options for when to open the window are
onLoad, onError, or
> onAbort.
> I want it to be opened onClick. If I do assign a link to
the image, and
> then
> select the Open Browser Window behavior, it gives me the
option to open
> the
> window onClick. However, when I test it, it opens 2 new
windows - the one
> I
> want, and the one that is the link that I assigned to
the image.
>
> I can't figure this out! Any help would be greatly
appreciated.
>
> Sam
>

When trying to re-install OS X 10.4 on my computer the destination volume window is completely blank. How do I proceed?

I tried to do a disk repair on my iMac but Disk Utility was unable to complete the repair, so I tried to do an erase and intall, but when I got to the "select destination volume" window, it was completely blank. Is there any way to fix this?

Actually Neil meant to say format the erased hard drive as Mac OS Extended (Journaled).
 Cheers, Tom

New window behavior change FF 29.0.1

New window behavior changed with FF 29.0.1. I have a custom page that I built that has a bunch of links to sites/pages that I visit frequently. Every one of the links on that page begins with <a target="_blank" href=" >
I typically keep this page maximized and until FF 29.0.1, when I clicked one of those links, it opened in a new maximized window. If I had the page restored instead of maximized, when I clicked one of those links it opened in a new restored window. In other words, the new window was opened in the same window state as the page from which I clicked the link. Now, when I click a link on a maximized window, it opens in restored view and I have to manually maximize it. It's a pain in the patoot.
I'd like to know how to change FF to return to the previous behavior and also why someone felt it was necessary to change this behavior.
''edited the HTML coding that prevented this message from being completely displayed''

You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Render Setting Options window

Hello all,
what happened to the Render Setting Options window in CC Particle World. Its where you can set how the paricle bounce off the ground. I remember it from CS4. but in CS5.5 its not there. Maybe I'm confusing it with some other plugin.
On a Mac
CS 5.5
Thanks

All options are in the main interface. There is no more custom settings panel.
Mylenium

Cant Add Scenes or Scene Window

Hi,
I cannot add scenes to my flash animation. When I go to Insert>Scene, the scene button is not selectable. When I go to Windows>Scene, the scene window is not selectable. I have also troed using the keyboard shortcuts, which have not worked either. What can I do about this? I would like to add scenes, as I am working on rather large and confusing projects.
Any help is appreciated.
Thanks.

If you can get away from using scenes you are moving in a better direction. You can work in a movieclip the same way you work on the main timeline... a MovieClip is pretty much just a portable version.
Here is a quick guide...
1) choose: Insert -> New Symbol
2) in the interface that opens select MovieClip and give it a name like you would for a scene... click Okay
The stage displays the work area for the movieclip and its inner timeline is showing (if you have the timeline panel opened). You should be able to see the crosshairs that mark the 0,0 registration mark for that movieclip. For the moment just draw something in it in frame 1 and then choose Edit -> Edit Document to get back to the main timeline.
Go to the library and drag a copy of this new movieclip out onto the stage and locate it as desired - you might consider placing it so that it is at the upper left corner of the main stage so that it has the same reference as the stage relative to x and y coordinates. Then you can doubleclick that movieclip on the stage to edit it and build the animation inside it.
If you already have a main timeline with an animation in it, you could select all the layers/frames of that animation and right click it and choose Copy Frames. Then you can paste what you copied inside the movieclip by opening it up for editing, selecting the keyframe in it and right click that and choose Paste Frames... all layers and frames that you copied will automatically fill out inside the movieclip.
I recommend you do something simple to get the hang of it. It is not difficult and is really no different than building the animation in the main timeline.

Change cursor when using open browswer window behavior

Okay, I give. I added an "open browser window" behavior to a line of text, which is working. How do I get the cursor to change to a finger on rollover? Thanks!!!! ttt

You need to give the text a 'null' link, an example of which Nancy has written for your.
You may want to take a look at David's Smart Link extension:
http://foundationphp.com/tools/
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Close WIndow Behavior ? CS3

Does anyone know how to set the Close Window behavior of a
window that has been opened with the Open Browser Window behavior?
I've created a rollover icon which I want to use for the Close
WIndow behavior, but I don't see this option in the Behavior
options. Am I approaching this in the wrong way? Any suggestions to
put me in the right direction would be helpful.

> Am I approaching this in the wrong way?
Yes. Just let people click on the "X".
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"guitar1960" <[email protected]> wrote in
message
news:gepnj1$73i$[email protected]..
> Does anyone know how to set the Close Window behavior of
a window that has
> been
> opened with the Open Browser Window behavior? I've
created a rollover icon
> which I want to use for the Close WIndow behavior, but I
don't see this
> option
> in the Behavior options. Am I approaching this in the
wrong way? Any
> suggestions to put me in the right direction would be
helpful.
>

Open Browser Window Behavior

I am using the Open Browser Window behavior. When test on my
machine, it works fine in IE, Safari, Firefox and Navigator. When I
upload to my test server it does not open at the correct size in IE
7 (did not test earlier versions) and Safari 3. In both browsers,
the new window is tiny, whereas I am specifying 460 wide and 490
high.
The code for this behavior is: <li>Chairman - John
Andrews (<a href="#"
onclick="MM_openBrWindow('Bios&Roles/BioJMA.html','BioJMA','width=460,height=490')">b io</a>)</li>
The page is at:
http://www.collabracom.com/Home-Test8/About/Index.html#
I have the behavior inside a Tabbed Panel. The links for this
behavior on on the "Leadership" tab.
John

My pet peeve - a website in a single page.
It works fine for me in IE7. Once I found the tab.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"John-Andrews" <[email protected]> wrote in
message
news:fen9cg$10n$[email protected]..
>I am using the Open Browser Window behavior. When test on
my machine, it
>works
> fine in IE, Safari, Firefox and Navigator. When I upload
to my test
> server it
> does not open at the correct size in IE 7 (did not test
earlier versions)
> and
> Safari 3. In both browsers, the new window is tiny,
whereas I am
> specifying
> 460 wide and 490 high.
>
> The code for this behavior is:
Chairman - John Andrews (<a href="#"
>
onclick="MM_openBrWindow('Bios&Roles/BioJMA.html','BioJMA','width=460,height
> =490')">bio</a>)</li>
>
> The page is at:
http://www.collabracom.com/Home-Test8/About/Index.html#
>
> I have the behavior inside a Tabbed Panel. The links for
this behavior on
> on
> the "Leadership" tab.
>
> John
>

Open Browser Window behavior not working in IE6 Win

Using DW 8 on Mac and can't get this Open Browser Window
behavior to work in IE 6 on a Windows machine. Any
suggestions?

This page is a GoLive page, and it throws a js error when it
loads because
of some of the GoLive code you have left therein.
I see that link as orange in IE6. And when you click on the
link, you throw
another js error, because the function (MM_openBrWindow) is
not defined on
the page - which is what causes the link to open in a
full-size browser
window. If it were not for that js error, you would get TWO
windows opening
since you have BOTH a link and the behavior, and the behavior
is not
'killed' with a return false, like this -
<a href="aptapp.html" class="override"
onClick="MM_openBrWindow('aptapp.html','QualifyforFREEMOVE','scrollbars=yes,width=760,hei ght=800');return
false">
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mcjack" <[email protected]> wrote in
message
news:elul28$le2$[email protected]..
> Here you go:
http://www.freemovetexas.com/new
> Only the index here. See the last text line of the the
center text and the
> link on the What You MUST DO to get Your FREE MOVE" blue
box on the left
> nav
> area.
>
> Sorry to double up, but I'm up against a deadline and I
also have another
> problem with the link color override for this same Open
Browser Window
> behavior
> in the last line of text in the main center td. The a
color for the page
> is
> white but the .override a:link color is orange. The link
shows white in an
> IE6
> browser. I'm kinda green at this. Can you suggest on
this link color
> problem
> also for IE6? Thanks!
>

3D Render Destination "Scene Window" Behavior

Similar Messages

Maybe you are looking for