3d sound or six stereo speak

i just got a durabrand 80 watt 5. home theater system. When i went to connect it to my sb li've 24bit sound card i found that instead of the usual green orange and black 3.5mm cords there was only one green one
does this mean that i am stuck with 3 sets of stereo speakers or is there a way to get 3d sound

I think that it had one regular headphone size jack for input and also a component video input, but i got mad and returned it to Walmart. I then went on Amazon and bought a set of 5. Creative Inspire T5400 speakers and never regretted it. The Quality was much better and you get <EM>real</EM> surround sound.
Advice for anyone who is looking for speakers.
DON'T BUY DURABRAND SPEAKERS

Similar Messages

Mini Stereo Speaker (great concept disappointing performance)

Blackberry!!! what are you doing.
I have bought the new mini stereo speaker. the concept and workmanship is excellent.
You can attach it on any safety belt...bag carrying strap....standby time...operating time is excellent.
it can be used as portable "stereo" speaker and you can connet "ordinary" headphones, earphones to use bluetooth stereo...
BUT:
The sound is very disappointing! Blackberry claims that they use Bluetooth 3.0 but in fact the performance is even less than 2.1 bluetooth versions...the typical "chirping" and distorted sound of old style bluetooth generation 2 and 2.1
For the ones who do not care about good sound quality it is an amazing product with excellent usability...for the ones who care about sound quality (at least for headphone use...because that those tiny built in mini stereo speakers cannot perform nice is oabvious) it will be a dissapointing experience and the item is outperformed by any bluetooth headphone or receiver in the market nowadays! As a hands free system it is JUST enough...
Either Blackberry has mixed up their bluetooth chip sets in production or they just name it bluetooth 3.0 and use 2.1...the item is not that cheap and for this price "sound matters"!
Blackberry smartphones always had very good bluetooth sound quality...i use it in my car from old Bold generation onwards (now i use Q10...still a great stereo sound with bluetooth, much better than iphone and android phones) but in combination with their OWN mini speaker a desaster...i tested the device also with Sony Experia Z...it was slightly better, but still bad!
I always had been a Blackberry fan...but slowly and constantely you make me run away from your brand, Mr Thorsten Heins! you are frustrating Blackberry user, like me, already by skipping all that great features of the past (security and data compression) and great concepts of useful accessories lag the right technical solutions which are standard nowadays!
Kind regards from Vienna,
Rafael

I have not seen this issue with mine and I have used it on my Q, Z and 9860
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I put a case on my iPod touch 5 and now there is no sound coming from the speaker. The head phones work though. I called Apple Support and the 2 people I spoke with seemed baffled. Has this happened to anyone and how do I resolve this?

I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker. There is sound when we use the headphones. Is there a mute function that I may have switched on and if so how do I turn it off?
It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device. Who h has not helped.
HELP!!!!!!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

The sound quality of my speaker suddenly got really poor when playing music or videos. Sounds like an old AM radio or Sputnik. Pretty sure it's hardware related but maybe not. Thoughts on what the problem might be and if it can be repaired?

The sound quality of my speaker suddenly got really poor when playing music or videos. Sounds like an old AM radio or Sputnik. Pretty sure it's hardware related but maybe not. Thoughts on what the problem might be and if it can be repaired?

The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

What are the characteristics of the sound output from the speaker iPad3?

What are the characteristics of the sound output from the speaker iPad3?

man -s4 proc
or
http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
process whose procfs directory is being accessed.
tim

HT201401 My iphone 4 wont play sound through the internal speaker. Will play if I hook up headphones. I have reset it, restored it, and it does the same thing.

My iphone 4 wont play sound through the internal speaker. Will play if I hook up headphones. I have reset it, restored it, and it does the same thing. I can still hear when i make calls too. The the output button only says dock connector or apple tv.

If the phone has ever gotten wet it may be damaged. It may also have dirt or a bent pin in the dock connector or the earphone jack. Try cleaning the dock connector and inspecting it with a magnifying glass. Try inserting and removing the earphone plug several times. If you have restored it and that did not fix the problem damage is the most likely cause.

Theres very little sound coming from my speaker and people cant hear me i phone 4

theres very little sound coming from my speaker when i play music and ringtone it was working fine last night also when its going straight to voicemail when people ring but then coming through as a missed call, then when i recive calls i can hear people bnut they cant hear me is anyone else having this problem with there iphone 4

Hello adam-hardwick1993,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario

Just upgraded my 2014 iMac to yosemite. Now my Bose sound link won't work. The bluetooth is connected and it beeps as normal, just no sound comes from the speaker. This is very frustrating (along with the now flat rather than 3D icons on the desktop)

I have just upgraded my 2014 iMac to YOSEMITE. Now my Bose Soundlink bluetooth speaker connects, beeps as normal, but produces no sound from the Bose speaker whatsoever. HELP PLEASE

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

5.1 sound instead of stereo

My camera (Sony HDR-SR11) records the sound in normal stereo.
Also my prroject is regarded to be in stereo.
However when I import my footage, 5.1 tracks are created.
The properties of my clips are on the attachment.
I should do something wrong, but I can't discover what.
Where am I supposed to make a mistake?
Rob

Hi, Harm. You helped me once before and I'd like to ask if you could help me again. I have two concerns:
1) I did an interview on video not long ago, using a Sony PD 150 camcorder. When it came to edit the video footage and I imported it into CS4, I found that the sound was a little low. I couldn't increase the volume enough the usual way (by raising that little line on the sound track in the timeline) and was wondering if there was another way to do that.
2) I checked the inteview footage the other day and found that, whereas the video is OK, the sound has disappeared completely! The line on the soundtrack in the timeline, the one that is usually squiggly with the sine wave, is now completely flat. Do you know how or why that happened and is there any way to get the sound back?
Many thanks!
Lewis
Date: Sun, 20 Sep 2009 07:26:33 -0600
From: [email protected]
To: [email protected]
Subject: Re: 5.1 sound instead of stereo
It should not be a problem, only optically, but you can try to just delete the 5.1 tracks.
>

Sound coming from wrong speaker (5.1 Setup)

I have my iMac (Mid 2011) connected with a AV Receiver (Thunderbolt ==> HDMI). The sound from the center speaker is coming out of the rear left speaker.
When I check the speakers with MIDI configurator in the application folder, all noise is coming out of the speaker it should come out.
The player i am using mostly is VLC. I also tried Mplayer and Plex, both have the same issue.
I am using OS X Lion, I did some research and found a page on the VLC forum where this issue is happening to several people

Originally Posted by jmacguire
Sorry, I keep saying .13 in my posts. It is the .16 drivers I was speaking about. You can find them everywhere it seems.......https://www.google.com/search?q=SBZx...en-US:official
The .16 drivers on my computer are displayed as 6.0.102.17, date 3/25/2013, is that correct?
I noticed that the routing improved compared to .23 however the bass and center are still being routed to the wrong speaker, at this point I'm starting to think that it could be a problem with my 5.1 kit, I will give it a shot with my on-board sound card.

Audio out jack only plays sound in the right speaker.

Whenever I plug anything (speakers, earphones, etc.) into the Audio Output jack, it only plays sound through the right speaker/earphone. The left speaker/earphone hardly has any sound at all.
How should I go about fixing this problem?
It ***** and it's annoying. At first, I thought it was just my earphones but they work perfectly fine with my iPod and other devices.

HI Chris,
my daughter has the ipod touch 4th generation and it started only having sound come out of the right speakers in both of my vehicles. I read also it could be a broken socket causing it. Do you know about this? How does one break a socket and how would I repair that? The person on y*hoo answers said to either send it to apple refurbished unit or replace it. Replace it? Really? It's a 64 GB ipod touch that I won at work with reward points which is the only reason I could afford it. Looking for better solution like your's above but I'm worried I will have to send it in. I was looking on my iphone 4 and noticed the volume balance was under Settings>General>Accessibility so I guess it's different on an ipod touch?

Sound only on right speaker

hello community,
i need your help
When i open a stream or a video i have sound on the right speaker only,
i have no sound problem with any other program thought.
the Problem was initially recognized by me on the 14th of August 2012
no big chances to my system where on that day or the day before.
i tested 2 divieses ( headset and speakers) => same problem
i check my drivers
reinstalled them
updated flash player today (8/16/2012) problem still there
check for wierd processes (2x flash player plugin pocesses as it should be)
restared the pc
can someone tell me what is wrong?
Thank You & sorry for my bad English

Could you give our 11.4 beta a try to see if this continues to happen? This should be fixed, for at least Logitech headphone devices.
8/7/2012 - Flash Player 11.4 Beta 2

Sound only in One speaker

Got a new computer with VIA KT333 KT3 Ultra series and loaded on Windows 2000 professional. Everything works fine except can only get sound out of one speaker. Tried re-installing the audio driver. Tried all speaker configurations in control panel under multimedial. Tried three different sets of speakers. No warning in the system devices in control panel. Thinking the MB may be bad.

Hi,
A couple of generic things you could try, but might not apply to your specific mobo.
First, make sure that the plug is fully plugged in to the socket. Those 3.5mm plugs don't leave a lot of room for error, and sometimes a combination of the plastic on the plug and the metalwork surrounding the socket will prevent the plug from going in all the way. This is more likely to affect the right channel. (I assume that in trying 3 sets of speakers, there wasn't a common faulty lead involved).
The second thing to look at depends on your computer setup. Many (but not all) MSI mobos have a 10 pin header called (for example) Front Panel Audio Connector: JAUD1. This lets you connect to an Audio Out socket on the front panel, as an alternative to the rear panel outlet. The audio outputs connect first to the the front panel (green) socket, with a return circuit for each channel which is automatically disconnected when you put a plug into that socket. So the audio out signals travel in lovely unshielded cable from the mobo to the front panel and back, before going to the back panel. If you don't have a front panel socket (and cable to suit), then you have to put a couple of jumpers across (for example) pins 5 & 6, and 9 & 10. If one of these jumpers is missing, you will only get one channel out. You could also lose a channel if there is a fault in the cable taking the signal from the mobo to the front panel, or the return cable, or in the switch contacts of the front panel socket (or in the rear panel socket contacts, for that matter).
So, if you have a front panel audio out - try that and see if you get both channels. Also, check the wiring from JAUD1 to the front panel. You could also try removing the cable from JAUD1 and installing a couple of jumpers instead (check the mobo manual). If you don't have a front panel audio out, check that the 2 jumpers are on JAUD1. You could even try cross connecting the JAUD1 pins (5 to 10 and 9 to 6) and seeing if the missing channel changes or not.
Also, try a few different audio sources (CD playback, playing .WAV or MIDI files, using Line Input - and check the advanced options in the Audio Mixer controls to make sure the Balance controls are centred.
I hope this helps.
Cheers

CLICK POPS sounds on my RIGHT speaker.. WH

Hello there all, Well thats pretty much my question, I have new speakers and an Audigy 2 value (normal version).All is fresh installed and drivers are intalled perfectly. I did have this problem before as well with my last speakers and I wanted to updated my Aspire 6. to Aspire 7. and still the same thing.At firts I thought that my Sound card was sharing its IRQ and yes indeed... It did. And I moved it to another PCI slot and now is usins its own IRQ *6*.. but I still gettint the same CLICK POPS sounds on my "RIGHT" speaker.. same thing.. Why? please I need help! I have formatted harddri've as well and no fix at all.. Thanks a lot! Any help would be highly appreciate it.

orpheo wrote:
Hello there all, Well thats pretty much my question, I have new speakers and an Audigy 2 value (normal version).All is fresh installed and drivers are intalled perfectly. I did have this problem before as well with my last speakers and I wanted to updated my Aspire 6. to Aspire 7. and still the same thing.At firts I thought that my Sound card was sharing its IRQ and yes indeed... It did. And I moved it to another PCI slot and now is usins its own IRQ *6*.. but I still gettint the same CLICK POPS sounds on my "RIGHT" speaker.. same thing.. Why? please I need help! I have formatted harddri've as well and no fix at all.. Thanks a lot! Any help would be highly appreciate it.
Can you test the card in another system? If there is the same issue --> faulty card.
IRQ 6 is a virtual IRQ so it can be shared even now. Try another slot.
Before doing this, you can also disable (temporary) all unused/unneeded controllers/devices showing on Device Manager. Just _right_mouse_klick_ the item and select disable (nothing else need to do). Later enabling is done by the same way (just select and enable).
Normally you can disable: onboard stuff like sound/serial com(s)/parallel (printer)/modem/midi/firewire (all)/etc. All USB controllers you do not need and Audigy firewire (if there is one). Also you can disable your NIC (onboard or PCI)temporarily.
By doing this all, you get more IRQs freed, and then maybe find the culprit (sharing IRQ with sound card).
this so far ...
.jtp

How to configure itune to speaker and other sounds effect to internal speak

as subject, how to configure itune to speaker while other sound effects to internal speaker, i done it before, but cannot remember how to configure it, thanks.

after upgrading to 10.5.6, it work by setting sound effect plays on "internal speaker" while sound plays on "line-out"
thanks everyone.

3d sound or six stereo speak

Similar Messages

Maybe you are looking for