3D surface plot export _ missing scale on the projections

Hi all,
I am using 3D surface plot subvi in LabView 2010 SP1. After plotting the data, I can export the images (.bmp, mata file etc.). While exporting the projections of the images, I am not able to get the axis scales on them, though when I export the isometric view, I do have all the scales in the exported image.
Any clues.
Cheers,
Deepak Arora
LAB View 2010 SP1

Hi Daniel,
I am using surface plot helper to plot a 3D data set. On the front panel indicator of this, there is an option to export the image files in various formats, once you right click on the graph. I have attached two of the exported files. One is an isometric view and another one is the X-Y projection obtained by using the projection palette attached to the 3D surface plot. As you notice, the scale bars are missing from the projection.
Thanks,
Deepak
LAB View 2010 SP1
Attachments:
20110830-PS-r1-FFTAmp.jpg ‏66 KB
20110830-PS-r1-FFTAmp2.jpg ‏50 KB

Similar Messages

Media Encoder export a different font from the project file

HI
Media Encoder export a different font from the project file when I use a installed font
The problem doesn't occur when exporting directly from Premiere
Any ides why?
Thanks

Hi! This also happened to me quite a few times with different fonts. Your fix worked, thank you. I don't think it's the font since, like I said, it happened with a few fonts, but just in case I was using Mf Young & Beautiful in TTF format.
Are there any side effects to turning off "import sequences natively"?

Adobe Premier Elements 12 - Exporting trimmed AVCHD files from the project timeline, to a separate folder for burning to Blu Ray disc with other software?

Hi, can anyone help please. This is the first time I have used this forum.
I use Premier Elements 12, a PC, 64 Bit, Windows 7, high powered computer.
Just started trimming AVCHD in this software.
I would like to know if it is possible to export trimmed AVCHD files to a folder elsewhere (files which were originally imported into the project timeline), so that I can burn the trimmed AVCHD files (not in 'Project' form) to Blu Ray disc (using another software which I know that works to burn video files to Blu Ray disc).

Kathy
Thanks for the update. Your progress sounds very good.
Premiere Elements 11, 12, and 13 are similar. But, version 13 has significant feature removals and a new Elements Organizer.
So, when viewing or reading tutorials, try to determine the version of the program being used for the tutorials. As I typically write
principles tend to remain the same from version to version, but the features tend to move, change, or be discontinued from version
to version. And, it is frustrating to be armed with principles when you cannot find a feature.
Some Comprehensive Free Resources for version 12.....
http://tv.adobe.com/show/learn-premiere-elements-12/
http://help.adobe.com/archive/en/premiere-elements/12/premiere-elements_reference.pdf
http://help.adobe.com/archive/en/elements-organizer/12/elements-organizer_reference.pdf
ATR Premiere Elements Troubleshooting: Premiere Elements 12 First Look Details
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
Please do not hesitate to ask if questions or need clarification.
Best wishes
ATR

Is there metadata of any kind on an export file that shows me the project file from where it was created?

Is there any way in looking at the meta data of a .MOV exported from Final Cut 7 that allows me to see what the project file was? I have this exported file, but I can't locate the original project file from where it was from. Was hoping there would be some sort of data that exists that shows me the directory. I've searched by filename and date created all over my drives but no luck.

Well, FCP comes from an age where it was assumed the editor had his $#%^ together.
EDIT: One of my mentors had the conviction that every day when you left the cutting room, you should leave it in such a way that a perfect stranger could walk in in the morning and pick up right where you left off. I really strive to live up to that ideal. I know we all get crazy busy and don't always properly archive our stuff, but it DOES save a lot of headaches down the road.
Message was edited by: Jim Cookman

BI Content Tab goes missing in between the Project

Hi Experts,
I have been finding a very strange behaviour in the BI 7 System of late. The BI Content tab has gone missing suddenly and its been more than a week till now. We have been installing and activating BI Objects regularly and suddenly one day its gone blank. I am a Tech Manager and was surprised when my consultant told me that BI Content tab is missing. I wanted to check if anyone else has faced this problem and if so whats the way out. Pls also let me know what are the reasons behind this so as to not repeat these mistakes in future. Would appreciate an immediate response - Swami.

Swami,
This is surprising.
Check, whether you are able to access BI content from menu (RSA1->Goto-> Install BI Content)
Adjust the screen resolution and check whether the BI content tab is hidden.
Also check in tcode : RSORBCT.
Ravi

Fields Missing After Upgrading the Project in peoplesoft

I had transferred a project from Qa to prod. User is not able to see some of the fields on prod, while on Qa everything is working fine. I have even compared the project it is same on both env. Onr thig is there that it contains app engine but i dont see section folder in upgrade tab. please suggest what could be the reason.

To insert all the Sections, Peoplecode and record structure in App Designer, go to Insert > Definition into Project (Cntl + F7) then next to definition type select Application Engine, enter your app engine name, to the right under related definitions select all the options. and then click on insert, so that all the objects will be added to the project.
once you migrate the project make sure you alter the records so that new fields will be built to the database.

When I try exporting my movie it says, "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)" I've tried many things including taking out special characters in the title.

Please Help!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

[JDeveloper/BPEL] "repository.jar" is missing when building the project

Hi,
First of all let me say that I'm new to JDeveloper and BPEL. I followed the "CreditFlow" tutorial and everything was OK. I could deploy and run it. Then I wanted to create my own webservice and try to create a simple HelloWorld BPEL workflow. My problem now is that I get a "Error: C:\oracle\JDeveloper\jlib\repository.jar (The system cannot find the file specified)" error when I build my project.
I had the same error message for the following jars:
-jaxb-libs.jar
-jaxb-impl.jar
-jaxb-api.jar
I just copied them from "<jdeveloper_inst_dir>\adfp\lib" to "<jdeveloper_inst_dir>\webservices\lib" to get rid of thoses error messages.
But this "repository.jar" simply doesn't exist on my filesystem...
I think it's pretty strange...
BTW I use JDeveloper version 10.1.3.3.0.
Thanks for any help!
Nicolas

Hi,
I am getting the same error. Any help is greatly appreciated.
May be if you have repossotory.jar in your lib folder by any chance please send it to [email protected]
Thanks

Legend for a 3D Surface Plot

How can I create a legend for a 3D surface plot? I'm doing a xy-projection and the view direction is directly towards this plane. The plot style is a surface contour plot. I want to display next to the plot the legend in a separate bar where the different colours with each value are displayed. The value for each contour line shall be displayed in the legend.
Patrick

OK,
I remember that thread now. That was the one were you did not want to use interpolate colors and I did. Well I still like to interpolate colors but that presents another challenge when trying to produce a proper color ramp. Without resorting to using the picture control
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=14&jump=true
I decided to play with some of the built in objects.
All of the round objects like knobs and guages include a color ramp. This gave me a ramp but is not quite up to what you get with an intensity graph.
Since I could not get a ramp on any of the straight indicators like sliders etc, I hid most of an intensity graph and just use the Z-scale. It turns out that the same data structure can be used in the intesity graph as the guage.
Can anyone think of other ays of producing a proper color scale when intepolation is turned on?
Ben
Message Edited by Ben on 12-24-2005 08:03 AM
Message Edited by Ben on 12-24-2005 08:03 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Scale.vi ‏81 KB
Scale.JPG ‏111 KB

Problem printing 3D graph surface plots

I have a LabVIEW vi that I have written that uses 3D graph surface plots. The front panel and 3D plots look great on the monitor. However, when I use the file > print option to print a snap shot of the front panel the 3D surface plot graphs are missing. All of the other controls and indicators print correctly, but the surface plots are missing completely. Any ideas on what may be the cause?

Hi JM,
Do you have Report Generation Toolkit? If so, this looks like it may be related: http://digital.ni.com/public.nsf/allkb/981C98819DBB89FE862569610046CFB8?OpenDocument.
Let me know if this helps.
Thanks,
Dan Richards
Certified LabVIEW Developer

Maximum matrix size for surface plot?

Morning,
I've streamed data from an experiment to TDMS, and would like to display it in DIAdem. I have M channels of N data points and would like to display them in a surface plot.
Usually, I'd expect to do the following:
- Build a X axis (Generate Numeric Channel - N points at dX interval)
- Build a Y axis (Generate Numeric Channel - M points at dY interval)
- Build a Z matrix (Convert Matrix from X axis, Y axis and the M channels of N data points)
I can then plot the X Y Z triplets to a surface plot.
Alternatively, I can build the X and Y arrays and plot X Y Z in matrix mode. This has the added benefit of not forcing interpolation, which *always* crashes
Now the kicker. For my dataset, M = 192, N = 290 000 and I'm unable to plot more than the first 20% of the data in X. I suspect that Diadem's limited to displaying 2^16 in surface plots, but no error is returned. Does anyone know if this is the case?
I can decimate my data to fit the limit, but it's never nice to have to throw away data!
(For clarification, the data is a raster scan of a sensor over a surface. I could drop the sampling rate and/or increase the speed over the surface, but that's a secondary concern)
CLD

Actually, it's the creation of an intensity plot that I'm more interested in, for two reasons. I can split my data into smaller segments and then compare measured data against my CAD model, but it's also handy having the global intensity plot available for human overview. Amusingly, almost any way I try to split the data besides decimating means that the split between datasets will be in some region of interest, which makes it awkward for non programmatic review Meanwhile, the problem with decimation is that I have four channels of data for each of those slices: channels 1 and 2 are analogue signals and averaged to give one plot, channel three is another analogue voltage that is plotted in another, but channel four is a digital waveform with some pretty short pulse widths. Decimate too much and you'll barely see any meaningful data when plotted on an intensity plot for this.
My instinct before starting was that DIAdem would handle the large dataset better than LabVIEW, which it did if I only wanted to plot YT data. However, after changing tack and heading back to LabVIEW I found that it was able to churn through things a bit better.
I'm happy to send an email to describe what I'm doing in a bit more detail, as well as provide some of the resulting plots, as it's a sensitive project. Understandably, even if I could upload the data for someone else to work on, I'm not sure how much use 1.7 Gb of TDMS is to anyone else!
CLD

3D Surface Plot Cursor Error

I can't seem to get the cursor(s) to function on the 3D Surface Plot. I right-click on the front panel plot, go to properties, and select cursor - but then I get an error and LabVIEW crashes. Has anybody had any sucess with this? I've tried it in both LabVIEW 6.1 and 7.1

Hi,
I have used the cursors in the 3D graph a couple of times with no problem. There are a couple of advices that I can give. Place the 3D graph strait form the pallet, do not create an ActiveX container and add the 3D graph. Open one of the 3D examples and see if you can add the cursors to a graph that was previously created. You can also try to unregister and reregister the ActiveX control for the 3D graph to make sure that the OS registers the control correctly. You can find the ActiveX control in the system32 folder (cw3dGraph.ocx) and here is a document on how to register the control.
I'm also including here an example that uses cur
sors, see if you can open it and run it. The second attachment is a style file for that 3D graph that includes a cursor. You can load this file by right-clicking on the graph and select "Import Style..". Hopefully you'll be able to load the style and start to work from there.
I hope this helps.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.
Attachments:
Torus_with_3D_Cursor.vi ‏312 KB
3DGraphStyle.cwx ‏3 KB

Missing file stops DVDSP project opening- help!

I've been working on a DVDSP project for a month now.
I came to open it today and get the message "Searching for movie data file "name" Fin 000 00012.It gives me the option to search for the file, which proves fruitless. then i get the message that the movie file will not play properly without the missing file.
The project won't open further and i have to force quit.
The point for me is i can't open my project, even saved earlier versions.
Is there any way round this?, as i've put alot of work in i don't want to lose.
regards Nick

Welcome to the Boards
Instead of pressing locate, pressing skip/cancel (which you may have to do often) may get you past this.
This is one of the reasons not to use reference movies and bring those into DVD SP. Your best bet is to make self contained files, or if no room or time, immediately compress a reference movie to an m2v and use that.

Exporting a highlighted section of the song

Is there a way to highlight a certain section of a song then export just that part instead of the entire song?

If you create a playback region (loop region), the application exports just that portion of the project.

Missing data in 3D surface plot.

Got an easy one for someone to solve. I've created a 3D plot, but the plot doesn't show all of the data.
I'm reading data from a set of .txt files and trying to visualize the results via the 3D plot. Each txt file contains a set of 401 data pairs (y location, measurement). A scalar (x location) is assigned to each file set, then added to an array containing data from previously read files. The resulting array is parsed, rearranged, etc. before going to the 3D Surface Plot control. Looks goofy because this .vi was originally used to combine data from multiple .txt files into a single file.
As you can see from the screen shot, the 3D plot only shows data from 400 to 445 (input data goes to 800). I checked the plot input arrays/matrices to ensure all of the data was read from the .txt files (it's all in there). What am I missing?
The .vi is attached along with a sample .txt file.
Attachments:
incomplete 3d plot.vi ‏23 KB
OE1_CHANNEL1_20100106_141010_58.txt ‏10 KB

You might want to transpose the z array so the dimension better match the x and y array sizes. Also eliminate the zero at the end of the y array.
Delete the first column from the z-matrix, it seems to duplicate the y array.
Your data and array gymnastics are incomprehensible and way too complicated. Can you tell how you want to read the input file in some simple words?
LabVIEW Champion . Do more with less code and in less time .

3D surface plot export _ missing scale on the projection​s

Similar Messages

Maybe you are looking for

3D surface plot export _ missing scale on the projections